Mining of Mineral Deposits最新文献

{"title":"Probabilistic assessment of slope stability at ore mining with steep layers in deep open pits","authors":"O. Sdvyzhkova, S. Moldabayev, A. Bascetin, D. Babets, E. Kuldeyev, Zh Sultanbekova, Maksat Amankulov, Bakhytzhan Issakov","doi":"10.33271/mining16.04.011","DOIUrl":"https://doi.org/10.33271/mining16.04.011","url":null,"abstract":"Purpose. A methodology development for predicting the geomechanical situation when mining an ore deposit with steep-dipping layers, taking into account the uncertainty in determining the rock properties, which is a consequence of the rock mass heterogeneity. Methods. The assessment of the open-pit wall stability is based on a combination of numerical simulation of the rock stress-strain state (SSS) and probabilistic analysis. The finite element method is used to determine the changes in the SSS that occur at various stages of mining operations due to design changes in the overall open-pit slope angle. The elastic-plastic model of the medium and the Mohr-Coulomb failure criterion are implemented in the codes of the 3D finite element analysis program RS3 (Rocscience). Stochastic simulation is used to assess random risks associated with natural object state variations. Findings. The distribution of maximum shear strains, which localizes the real or potential sliding surfaces in the open-pit wall at various stages of ore mining, has been identified. Based on the Shear Strength Reduction procedure, the open-pit wall Strength Reduction Factor (SRF) has been determined. The probabilities of open-pit wall stability loss, as well as the decrease in the strength reduction factor below the standard level at all stages of the ore body mining, have been revealed. Originality. For the first time, for real mining-geological conditions of a deep ore open pit, the dependence of the strength reduction factor on the overall wall slope angle, which changes during mining of each steep layer, has been determined. For each stage of mining operations, for the first time, the probability of a decrease in the open-pit wall stability below the standard level has been determined based on stochastic simulation. Practical implications. The ratio between the open-pit contour characteristic (overall slope angle) and the probabilistic safety factor is the basis for practical solutions to ensure the efficiency and safety of mining at various stages of friable and hard overburden excavation, ore extraction, as well as for the subsequent optimization of the open-pit design contours.","PeriodicalId":43896,"journal":{"name":"Mining of Mineral Deposits","volume":" ","pages":""},"PeriodicalIF":1.9,"publicationDate":"2022-12-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41672534","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Experimental study of the radial multi-scale dynamic diffusion model for gas-bearing coal","authors":"Yanpeng Xu, Xiao Chen, J. Yu","doi":"10.33271/mining16.04.080","DOIUrl":"https://doi.org/10.33271/mining16.04.080","url":null,"abstract":"Purpose. The purpose of this paper is to solve the scientific problem that the classical diffusion model in columnar coal cores cannot accurately describe the whole process of gas diffusion. Methods. The diffusion-percolation experiments were carried out using the laboratory’s homemade experimental equipment with standard ϕ 50mm×100 mm columnar raw coal cores under different air pressures. Findings. The classical diffusion model was used to fit the experimental data. The experiment has found that the classical diffusion model of the columnar coal core can only partially describe the gas diffusion process. The longer the experimental time, the larger the error between the model and the experiment, and the analysis has found that the apparent diffusion coefficient shows decay changes with time. The dynamic diffusion coefficient concept is then proposed in order to con-struct a radial multi-scale dynamic prominent diffusion-percolation model for columnar coal cores. The theoretical curve of the new model nearly coincides with the experimental curve, and the new model can describe the gas diffusion-percolation process of columnar coal cores more accurately. The multi-scale dynamic diffusion-percolation model covers the classical diffusion model. It explains the mechanism of gas diffusion-percolation in multi-scale pores, i.e., at the beginning of the flow, gas flows out from the large external pores first, from the surface inwards. Over time, the pore size through which gas flows gradually becomes smaller, the diffusion resistance gradually increases, and the apparent diffusion coefficient slowly decreases. Originality. This paper proposes a new multi-scale dynamic diffusion-percolation model to compare the old and new model analysis, as well as carefully studying the mechanism of gas flow in coal. Practical implications. This research has important engineering significance for the accuracy of measuring the gas content of coal seams, as well as predicting coal and gas content.","PeriodicalId":43896,"journal":{"name":"Mining of Mineral Deposits","volume":" ","pages":""},"PeriodicalIF":1.9,"publicationDate":"2022-12-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46248686","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Features of using equipment for in-pit crushing and conveying technology on the open pit walls with complex structure","authors":"K. Babii, M. Chetveryk, Volodymyr Perehudov, Kostiantyn Kovalov, R. Kiriia, Viacheslav Pshenychnyi","doi":"10.33271/mining16.04.096","DOIUrl":"https://doi.org/10.33271/mining16.04.096","url":null,"abstract":"Purpose is to substantiate the use of an in-pit crushing and conveying technology at the open pits with complex structure of the working zone, which technological complex includes inclined and steeply inclined conveyors for improved economic efficiency of mineral mining at deep levels. Methods. The study applies a complex method including: technical-economical analysis of the practice of mining enterprises, experience of using conveying units at concentration plants and open pits; mining-geometrical analysis in terms of open pit sections – to identify the structure of the working zone of a deep open pit wall and its features along the depth; structural developments – to improve the design of a steeply-inclined conveyor; simulation modelling of the technological processes – to select optimal technical solutions. Findings. Basing on the performed studies, it has been identified that transfer to a new trend of the in-pit crushing and conveying technology, considering the structural features of the working zone of a deep open pit, is rather prospective. In this context, it is expedient to use inclined conveyors or deep-trough conveyors on the sites of an open pit wall with the inclination angle of 10-18°; in case of sites with the inclination angle of 30-36°, it is recommended to use steeply inclined conveyors. Originality. For the first time, a relation between the working zone of a deep open pit and formation of the structure of technological complexes has been identified. Dependences of the boundary inclination angle αn of a pipe conveyor on the angle of non-filling θ of its belt with the cargo at different coefficients of cargo-belt friction have been defined. Practical implications. The obtained results make it possible to widen the application sphere and increase the efficiency of mineral mining with the use of in-pit crushing and conveying technology.","PeriodicalId":43896,"journal":{"name":"Mining of Mineral Deposits","volume":" ","pages":""},"PeriodicalIF":1.9,"publicationDate":"2022-12-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43153041","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Evaluation of gold ore properties and their impact on grinding operations","authors":"Mohamed M. A Hassan, Mahrous A. M. Ali, M. Farghaly, W. Abdellah, Jung Gyu Kim","doi":"10.33271/mining16.04.034","DOIUrl":"https://doi.org/10.33271/mining16.04.034","url":null,"abstract":"Purpose. The purpose of this paper is to evaluate the efficiency of grinding operations in terms of how mechanical properties (e.g., strength properties and ore texture) affect the Bond Work Index. Methods. The specimens have been collected in the Eastern Desert of Egypt, namely Abu Marwat, Hamash and Al Sadd. As a result, strength parameters such as compressive strength, cohesiveness and hardness have been assessed. Ore texture, mineral content and bonds between tiny fabric units have been examined using X-Ray Diffraction (XRD) and thin section. Findings. This research shows that as the strength properties of the rock increase, the Bond Working Index also increases. Moreover, the results indicate that the level of cohesion of ore minerals with the surrounding tailings, on the one hand, and the variance in the tailing content, on the other hand, play a significant role in the processing operation, given the discrepancy in the Bond Work Index for the six Abu Marawat gold ores of 18.8%. Originality. This research attempts to develop a methodology for assessing the efficiency of grinding operations as a function of rock strength properties and ore texture in relation to the Bond Work Index. Practical implications. Ore texture is one of the most important factors influencing the grinding process. Since grinding consumes a considerable amount of energy, the economic evaluation is based on increasing the grinding efficiency. According to previous research, the petrographic, which varies from sample to another, has an impact on the mechanical properties as well as the grinding operations.","PeriodicalId":43896,"journal":{"name":"Mining of Mineral Deposits","volume":" ","pages":""},"PeriodicalIF":1.9,"publicationDate":"2022-12-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"41868555","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Metal losses at the Trepça concentrator during the enrichment process","authors":"Alber Hyseni, Enes Muzaqi, Bedri Durmishaj, Sylejman Hyseni","doi":"10.33271/mining16.04.132","DOIUrl":"https://doi.org/10.33271/mining16.04.132","url":null,"abstract":"Purpose. The purpose of this paper is to determine the flow of lead, zinc and silver metals at the enrichment factory in Trepça. The authors have determined the flows of metals discharged into the tailing of Kelmend. In addition, they make a correction for the losses of Pb, Zn, and Ag metals, which are very high. Methods. Ore enrichment has been studied for two years in the production process of lead and zinc concentrates based on the following facts: selective separation of lead and zinc metallic minerals, as well as non-metallic minerals that are present in the ore. Sampling was conducted at the entrance to the ore receiving bunker. The samples were taken according to standards and sent for analysis in laboratories. In the laboratories, the samples were ground in a mill, then dried and sent for chemical analysis. The chemical analyses for Pb, Zn, and Ag were done at the Trepça laboratory, while for 35 chemical elements at the BRGM laboratory in France, with inductively coupled plasma atomic emission spectroscopy (ICP/AES) and inductively coupled plasma mass spectroscopy (ICP-MS) equipment. During the technological process, samples were taken for chemical analysis, and then in the flow, evidence was also taken to analyses the losses of lead, zinc, and silver metals. Mini Tab software was used to perform a T-test for independent samples and then correction was made for these metal losses in the tailing. The method of economic geology for the calculation of the balance of metals was used. Findings. Based on the study of the chemical analysis of ore at the entrance to the receiving bunker, then sampling during the technological process and the flow of metals into the tailing, the amount of metal losses for 2020 and 2021 has been determined. Based on the calculations of the metal balance, the metal losses that affect the economic evaluation are presented. The remains of landfills on the ground affect the pollution of the environment and rivers. Originality. The originality of the study is in the use of the results of chemical analyses obtained in the BRGM Laboratory in France on Pb, Zn, Ag and other conductive elements. A total of 35 chemical elements of tailings, which are presented in this work, have been tested. Practical implications. According to the data of chemical and geochemical analysis, it turns out that in addition to losses of Pb, Zn, and Ag, we also have losses of conductive and rare elements.","PeriodicalId":43896,"journal":{"name":"Mining of Mineral Deposits","volume":" ","pages":""},"PeriodicalIF":1.9,"publicationDate":"2022-12-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48554949","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Substantiation and development of innovative container technology for rock mass lifting from deep open pits","authors":"Bolatkhan Khussan, A. Abdiev, M. Bitimbayev, S. Kuzmin, Sayat Issagulov, Azamat Matayev","doi":"10.33271/mining16.04.087","DOIUrl":"https://doi.org/10.33271/mining16.04.087","url":null,"abstract":"Purpose. The research purpose is to substantiate the rational parameters of innovative container technology for transporting mine rocks in open pits with account of technological advantages. Methods. The winding machine normal operation was determined by calculation performed. The container metal structure was designed in the environment of the Compass-3D software complex. The structural elements were tested for normal operation using computer modeling methods in the APM WinMachine 9.7 program, which gives the possibility to obtain the strength calculation values. Findings. The results of modeling the stresses on the wall of the container and the frame, as well as the yield strength are presented. The test calculation confirms the technical feasibility for operating the dragline-based mine winding machines. The influence of the container capacity on the performance of the winding machine has been determined and the dependence of the economic efficiency of the container technology introduction at the open pit depth has been revealed. Originality. For the first time, on the basis of computer modeling, the parameters of stress distribution on the container wall have been substantiated when performing a strength calculation. It has been determined that the maximum stress in the container wall is 117.52 N/mm2; the principal stress value is 83.85 N/mm2. The safety factor for yield strength is 1.8. The maximum load acting on the structure is 957.5 kgf, which does not exceed the calculated value. Practical implications. The practical importance is to improve mining efficiency, reduce the cost of transporting rocks and ensure automatic container unloading. The use of replaceable containers in open pits can significantly change the formation principles of shovels and transport complexes, increase their performance and the efficiency of shovels in the main processes.","PeriodicalId":43896,"journal":{"name":"Mining of Mineral Deposits","volume":" ","pages":""},"PeriodicalIF":1.9,"publicationDate":"2022-12-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47323984","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Mathematical model to assess energy consumption using water inflow-drainage system of iron-ore mines in terms of a stochastic process","authors":"O. Sinchuk, R. Strzelecki, I. Sinchuk, Теtуаnа Веridzе, V. Fedotov, V. Baranovskyi, K. Budnikov","doi":"10.33271/mining16.04.019","DOIUrl":"https://doi.org/10.33271/mining16.04.019","url":null,"abstract":"Purpose is to develop a unified mathematical model to assess energy efficiency of a water inflow-drainage process as the real variant of stochastic method for water pumping from underground workings of iron-ore mines. Methods. The research process was based upon the methods of probability theory as well as stochastic modelling methods. The stochastic function integration has been reduced to summation of its ordinates and further transition to a proper boundary. Findings. A mathematical model of a water inflow-drainage system as a stochastic process has been developed in terms of input parameters of a standard operating iron-ore mine. The abovementioned has made it possible to assess realistically, substantiate, and obtain possibilities for a specific production facility as well as for generalization of the results involving determination of stochastic characteristics of drainage process. Originality. For the first time, a mathematical model of drainage from underground levels of iron-ore mines has been developed as a stochastic process. The process characteristics have been identified relying upon randomness of a water pumping technique. In contrast to the available settings, the new model parameters characterize their dispersion. Possibility to obtain complete characteristics of energy consumption has been obtained: for drainage; for water accumulation volume in underground water collectors; for water pumping from the specified mine depths over the specific period as random processes. A number of drainage features have been analyzed and differentiated being determined with the help of nor-mal law of water accumulation velocity in the underground water collectors in iron-ore mines. Practical implications. In terms of operating iron-ore mine, a generalized drainage mathematical model has been developed as a stochastic process using statistical data concerning water accumulation velocity in the underground water collectors. It has been proved that if the ordinates of water accumulation velocity in the underground water collectors obey the normal distribution law then it is expedient to characterize drainage as a stochastic process. The developed methods, studying drain-age as a stochastic process, help expand the research boundaries involving other auxiliary operations performed during underground mining of iron ore raw materials.","PeriodicalId":43896,"journal":{"name":"Mining of Mineral Deposits","volume":" ","pages":""},"PeriodicalIF":1.9,"publicationDate":"2022-12-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"45464005","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Chemical pollution peculiarities of the Nadiya mine rock dumps in the Chervonohrad Mining District, Ukraine","authors":"V. Skrobala, V. Popovych, Oleh Tyndyk, A. Voloshchyshyn","doi":"10.33271/mining16.04.071","DOIUrl":"https://doi.org/10.33271/mining16.04.071","url":null,"abstract":"Purpose. The research purpose is to study the peculiarities of chemical pollution of the Nadiya mine rock dumps in the Chervonohrad Mining District, depending on the relief conditions and slope exposure, as well as to analyze the general trends in the distribution of chemical elements compared to the natural background. Methods. The chemical pollution differentiation of the Nadiya mine rock dumps at the level of ecotopes is studied on the basis of dispersion analysis; multidimensional ordination of ecotopes in the space of geochemical indicators – based on the Principle Component Analysis; a typological scheme of mine rock dump ecotopes is constructed based on discriminant analysis; statistical processing of chemical pollution parameters. Findings. It has been determined that the level of chemical pollution of the Nadiya mine rock dumps is characterized by significant heterogeneity even within the same slope exposure. Similarity in the distribution of chemical elements makes it possible to distinguish 6 of their associations, the main of which are I (Mg, Ca, S) and II (Al, Fe, K, Si). An analysis of the dependence between the chemical element concentrations indicates a close link between many parameters. It has been revealed that the closest dependence on the anthropogenic load intensity is demonstrated by such elements as Mg, Pb, Sn, Fe, Al, Cu, P, Ni, Zn. It has been determined that the difference between the ecotopes of different dump exposures is explained mainly by the level of Ca and Al concentration. Originality. It has been revealed for the first time that the Nadiya mine rock dumps of the Chervonohrad Mining District are characterized by an ecological space, which is assessed on the basis of the ordination of ecotopes on the axes of complex geochemical gradients of the environment. The typological scheme of mine rock dumps reflects the gradient of soil cover chemical pollution compared to the natural background. Practical implications. By determining the geochemical conditions of ecotopes in a certain period of time, it is possible to identify their position in the ecological-cenotic space of dump vegetation, as well as to predict the stability and possible changes in the vegetation cover as a result of various forms of anthropogenic impact.","PeriodicalId":43896,"journal":{"name":"Mining of Mineral Deposits","volume":"1 1","pages":""},"PeriodicalIF":1.9,"publicationDate":"2022-12-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"69438936","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Method for controlling the floor heave in mine roadways of underground coal mines","authors":"I. Sakhno, I. Liashok, Sakhno Svitlana, I. Oleksandr","doi":"10.33271/mining16.04.001","DOIUrl":"https://doi.org/10.33271/mining16.04.001","url":null,"abstract":"Purpose. The method development and research on controlling the floor heave of mine roadways located in the zone of increased stresses by local strengthening the rocks with mixtures expanding in the solid phase. Methods. The work uses the following research methods: analysis and generalization of previously performed research on the process of heaving the floor in mine roadways; full-scale mining studies, which include instrumental measurements at benchmark stations, rapid measurements, photo-fixation of floor rock cuts in the areas of dinting. Findings. It has been determined that the problem of heaving the floor is relevant for most of the temporary roadways located in the zones of increased stresses, for example, in the zone of longwall face impact, both Ukrainian and foreign coal mines. The conducted full-scale mining studies have revealed that the floor rocks in the zone of increased stresses are in a destroyed state and can be represented as a block-discrete medium. A method for controlling the floor heave in mine roadways has been developed, which is based on the formation of locally strengthened zones of a special shape in the mine roadway floor. The strengthening effect is achieved by consolidating the rocks due to their compression by mixtures expanding in the boreholes drilled into the floor of the mine roadway. The method parameters have been calculated which make it possible to set the necessary expansion pressures for the formation in the mine roadway floor of a stable strengthened zone of a specified shape. Studies on the formation of local strengthening of floor rocks with mixtures expanding in mine conditions substantiate the fundamental possibility of rock consolidation. Originality. The ideas about the consolidation of a block-discrete medium by compression and the formation of stable strengthened zones with mixtures expanding in the solid phase have been developed. Practical implications. A method for controlling the heaving of floor rocks and a methodology for determining the method parameters have been developed. The results obtained can be used to ensure the stability of mine roadways in zones of increased stresses.","PeriodicalId":43896,"journal":{"name":"Mining of Mineral Deposits","volume":" ","pages":""},"PeriodicalIF":1.9,"publicationDate":"2022-12-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46833647","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Geomechanical substantiation of the parameters for the mining system with ore shrinkage in the combined mining of steep-dipping ore bodies","authors":"Tyiak Isabek, Yerbol Orynbek, Kamchybek Kozhogulov, Zhadyra Sarkulova, Lazzat Abdiyeva, S. Yefremova","doi":"10.33271/mining16.04.115","DOIUrl":"https://doi.org/10.33271/mining16.04.115","url":null,"abstract":"Purpose. The research purpose is to substantiate a rational technology for mining steep-dipping ore bodies based on a complex of geomechanical studies in combined mining of deposits. Methods. Analysis of existing constructive methods for calculating the optimal mining system parameters when mining under-open-pit ore reserves in the zone of influence of surface mining operations, taking into account the natural stress-strain state of the rock mass. Numerical modeling is used to study the geomechanical processes occurring in the mass during the mining of under-open-pit reserves of steep-dipping ore bodies in order to substantiate the mining system with ore shrinkage. The geotechnical mapping of mine workings is conducted directly in the face to determine the mass rating. Findings. The calculation of the optimal parameters for the stope chamber, inter-chamber and inter-level pillars based on a complex of geomechanical studies has shown that the more intense horizontal stresses act in the bottom of the blocks and in the inter-block pillars, in which a large number of board gates have been driven. Originality. For the first time, using high-precision programs and given the nonuniform distribution of horizontal and vertical stresses acting in the mass for the Abyz Mine conditions, it has been revealed that when mining an individual block, the maximum horizontal stresses around the mined-out space reach 10-15 MPa; when mining a group of blocks – 20-25 MPa. Practical implications. The research results can be used in planning and mining with shrinkage of steep-dipping ore bodies during mining of under-open-pit reserves.","PeriodicalId":43896,"journal":{"name":"Mining of Mineral Deposits","volume":" ","pages":""},"PeriodicalIF":1.9,"publicationDate":"2022-12-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44861614","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}