Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics最新文献

筛选
英文 中文
Effects of Pure Shearing and Rigid-Body Rotation on the Evolution of Tip Leakage Vortex in an Axial Compressor Rotor 纯剪切和刚体旋转对轴流压气机转子叶尖泄漏涡演化的影响
Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics Pub Date : 2022-06-13 DOI: 10.1115/gt2022-83551
Yangwei Liu, W. Zhong, Yumeng Tang
{"title":"Effects of Pure Shearing and Rigid-Body Rotation on the Evolution of Tip Leakage Vortex in an Axial Compressor Rotor","authors":"Yangwei Liu, W. Zhong, Yumeng Tang","doi":"10.1115/gt2022-83551","DOIUrl":"https://doi.org/10.1115/gt2022-83551","url":null,"abstract":"\u0000 Tip leakage vortex (TLV) in an axial compressor has a considerable impact on aerodynamic performance. Hence, deeper insight should be gained into the evolution mechanism of the TLV. In this paper, the tip leakage flow (TLF) field of a low-speed large-scale axial compressor rotor at both design and near stall conditions by delayed detached eddy simulation (DDES) is analyzed. The swirling flow motion of the TLV is decomposed into three components: rigid-body rotation, pure shearing, and compressing-stretching. The effects of these swirling flow components on the evolution of TLV are investigated. Results show that the shearing and rotational motions of TLF at both design and near stall conditions vary because of the difference in leakage flow conditions. At the near stall condition, the TLV is stronger after its formation but breaks down earlier and changes more violently. Furthermore, the shearing effect plays a significant role in the TLF and prevails over the rigid-body rotation except in the core region of the stable vortex. Most of mechanical energy dissipation is caused by pure shearing. The spiraling pattern and orbital compactness of the TLV are investigated by the local trace criterion-based elliptical region (LTER) method. Results show that the main spiraling pattern of the TLV changes regularly as the TLV develops downstream. In addition, the decrease of the spiraling compactness level reflects the TLV breakdown due to the decrease of swirling strength caused by weaker rigid-body rotation and pure shearing. The swirling flow with high compactness caused by strong shearing effects contributes to the energy dissipation significantly.","PeriodicalId":423666,"journal":{"name":"Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics","volume":"53 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114576731","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Numerical Investigation of Unsteady Inlet Guide Vane-Rotor Interactions in a Transonic Fan Due to Boundary Layer Ingestion 边界层吸入下跨声速风扇非定常进口导叶-转子相互作用的数值研究
Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics Pub Date : 2022-06-13 DOI: 10.1115/gt2022-81878
Ritangshu Giri, M. Turner
{"title":"Numerical Investigation of Unsteady Inlet Guide Vane-Rotor Interactions in a Transonic Fan Due to Boundary Layer Ingestion","authors":"Ritangshu Giri, M. Turner","doi":"10.1115/gt2022-81878","DOIUrl":"https://doi.org/10.1115/gt2022-81878","url":null,"abstract":"\u0000 The effects of boundary layer ingested inlet distortion on the unsteady flowfield between an inlet guide vane (IGV) and rotor of a single stage transonic fan are important, as they result in significant changes in the massflow rate, stagnation pressure rise and stage efficiency. The three dimensional time accurate commercial URANS code EURANUS (Cadence Inc.) was used to generate and analyze periodic quarter annulus simulations of the IGV-Rotor fan stage. A comparison of mixing plane and time averaged solutions showed the unsteadiness of the blade row interactions especially along the interface between the IGV and the rotor. The mixing plane solution predicted a decrease in efficiency of 1.11 % in the fan stage compared to that of a rotor, while a time averaged solution predicted a 1.36 % efficiency decrease in the fan stage compared to that of the rotor. At design speed, significant non-linear interaction was observed with very high levels of unsteady loading occurring at the vane trailing edge region because of it’s interaction with the rotor generated oblique shock waves. These shock waves move upstream and get reflected through the vane passages creating additional fan stage loss. It can also be observed that the strong vortices of the inlet guide vane wake break up the detached rotor bow shock. These shed vortices are chopped by the rotor leading edge and ingested by the rotor. Both the time averaged and the time accurate results show that the wake vortices strongly interact with the rotor blade boundary layer. These cause a decrease in the rotor efficiency and stagnation pressure rise, while the high frequencies of the inlet guide vane wakes can be a potential cause of rotor high cycle fatigue (HCF). Additionally, small flow separations due to shock boundary layer interactions can be observed at the IGV suction surface near the tip and contribute to the IGV flow losses.","PeriodicalId":423666,"journal":{"name":"Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics","volume":"154 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122069312","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
An Evaluation of Passive Wall Treatment With Circumferential Grooves in a High-Performance Multi-Stage Axial Compressor 高性能多级轴流压气机环形槽被动壁面处理的评价
Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics Pub Date : 2022-06-13 DOI: 10.1115/gt2022-83100
Rubén Bruno Díaz, Jesuíno Takachi Tomita, C. Bringhenti, Daniel Tonon da Silva, Diogo Ferraz Cavalca
{"title":"An Evaluation of Passive Wall Treatment With Circumferential Grooves in a High-Performance Multi-Stage Axial Compressor","authors":"Rubén Bruno Díaz, Jesuíno Takachi Tomita, C. Bringhenti, Daniel Tonon da Silva, Diogo Ferraz Cavalca","doi":"10.1115/gt2022-83100","DOIUrl":"https://doi.org/10.1115/gt2022-83100","url":null,"abstract":"\u0000 Passive wall treatments with circumferential grooves in axial compressors proved to be effective in increasing the compressor stall margin in previous researches by creating a resistance to the flow that leaks in the tip clearance region of the compressor, from the rotor blade pressure side to the suction side. In the present work, a passive wall treatment with circumferential grooves was implemented in a multi-stage axial compressor. Different configurations of circumferential grooves were created at the casing of the first rotor row used in a four-stage axial flow compressor. 3D CFD flow simulations were performed in order to evaluate all the specified configurations aiming to find improvements on compressor stall margin. Investigations on the compressor flow characteristics were realized and the stall margin variations were determined. The numerical simulations were performed based on the Reynolds-Averaged Navier Stokes equations and the turbulence model was the k-ω SST. After the simulations, several rotational speeds of the compressor map characteristics, including the design-point rotational speed, were obtained for the case without casing treatment (smooth wall case) and for the case with circumferential grooves. In the results, passive wall treatment with circumferential grooves demonstrated an improvement in the compressor stall margin, especially for N = 0.60 and N = 0.90 rotational speeds.","PeriodicalId":423666,"journal":{"name":"Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics","volume":"65 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129698919","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Large Eddy Simulation of an Open Rotor Fan Blade 开式转子风机叶片大涡模拟
Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics Pub Date : 2022-06-13 DOI: 10.1115/gt2022-80538
S. Priebe, T. Wood, Junsok Yi, A. Mousavi
{"title":"Large Eddy Simulation of an Open Rotor Fan Blade","authors":"S. Priebe, T. Wood, Junsok Yi, A. Mousavi","doi":"10.1115/gt2022-80538","DOIUrl":"https://doi.org/10.1115/gt2022-80538","url":null,"abstract":"\u0000 Open rotor fan blades, when exercised across a range of operating conditions and design options, present a variety of complex flow physics including leading-edge flow separation, wake evolution and interaction effects, and laminar-to-turbulent transition. In this paper, we present a large-eddy-simulation (LES) study of a three-dimensional open rotor fan blade at realistic conditions. Specifically, we focus in this paper on takeoff conditions, run at a Reynolds number representative of a subscale rig typically used for aeroacoustic technology maturation testing, to explore the flow behavior and its effects on takeoff aerodynamic performance and aeroacoustics that contribute to community noise. The simulations were performed using GENESIS, a high-order unstructured LES solver. The convergence of the solution is assessed by varying the polynomial order of the solution from low to high order. The analysis presented in the paper focuses on the evolution of the flow near the blade surface and the subsequent mixing downstream in the wake for a realistic blade design that exhibits the full three-dimensionality of these flow physics. A detailed understanding of these flow features is most useful for the aerodynamic and acoustic design of open rotor propulsors and the related implications of the LES results relative to conventional RANS-based CFD/CAA predictions is discussed.","PeriodicalId":423666,"journal":{"name":"Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics","volume":"130 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116248303","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Experimental and Computational Investigation of an Advanced Casing Treatment in a Single Stage High Speed Compressor 单级高速压气机匣先进处理的实验与计算研究
Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics Pub Date : 2022-06-13 DOI: 10.1115/gt2022-83459
Nicholas H. Maher, M. Ross, S. Morris, S. Priebe, G. Jothiprasad, David Allan, G. Mcnulty, Michael Macrorie
{"title":"Experimental and Computational Investigation of an Advanced Casing Treatment in a Single Stage High Speed Compressor","authors":"Nicholas H. Maher, M. Ross, S. Morris, S. Priebe, G. Jothiprasad, David Allan, G. Mcnulty, Michael Macrorie","doi":"10.1115/gt2022-83459","DOIUrl":"https://doi.org/10.1115/gt2022-83459","url":null,"abstract":"\u0000 An advanced casing treatment design, in the form of bent-axial slots applied to the casing near the rotor leading edge, was tested in a single stage high speed axial compressor. Compressor performance and stall margin measurements were acquired for both casing treatment and for the smooth wall case at four different corrected speeds. The measurements also included rotor-exit radial traverses of unsteady total pressure. The results indicated an increase in rotor pressure ratio at all operating conditions with the application of the casing treatment. The stall margin also increased at all rotor speeds. Efficiency increases were observed with the casing treatment at design conditions and some off-design conditions.\u0000 Numerical simulations of the IGV, rotor, and stator were conducted with and without the casing treatment. These results served to validate the efficacy of the part-wheel Unsteady Reynolds-averaged Navier-Stokes (URANS) simulations to predict the effects of the casing treatment. The simulations also allowed a detailed study of the flow physics related to the interactions between the rotor and casing.","PeriodicalId":423666,"journal":{"name":"Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics","volume":"44 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124471440","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Experimental Analysis of an Axial Compressor Operating Under Flow Distortion 轴流压气机在流动畸变下的试验分析
Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics Pub Date : 2022-06-13 DOI: 10.1115/gt2022-82394
A. Baretter, P. Joseph, O. Roussette, F. Romanò, A. Dazin
{"title":"Experimental Analysis of an Axial Compressor Operating Under Flow Distortion","authors":"A. Baretter, P. Joseph, O. Roussette, F. Romanò, A. Dazin","doi":"10.1115/gt2022-82394","DOIUrl":"https://doi.org/10.1115/gt2022-82394","url":null,"abstract":"\u0000 In aircraft engines, compressor stages can encounter situations in which the flow is distorted at rotor inlet, for example during particular flight maneuvers, or due to the shape of the inlet of the airframe. The main objective of this paper is to investigate experimentally the effect of an inlet flow distortion on the internal flow dynamic and its consequences on the performance and operability of these machines. The distortion was generated by a porous plate grid installed upstream of the compressor. Eight total pressure rakes placed downstream of the grid were used to evaluate the distortion. Unsteady pressure measurements were performed on the casing at different axial and azimuthal positions to investigate the dynamic flow behavior at nominal conditions, at an operating point close to stall and during the transition to stall. 2D-2C PIV maps, synchronized with the runner position, were obtained on rotor blade-to-blade planes at three different spanwise positions (79%, 51%, 18% of the blade span). Three relative angular positions of the grid to the laser sheet were investigated at two different flow rates, namely the nominal flow rate and a flow rate close to stall. These three positions are corresponding to the laser sheet cutting through i/ the center of the grid’s wake and ii/ the two edges of the grid. The impact of the distortion on the performance of the compressor is analyzed and compared to existing models. The impact of the flow dynamic will also be considered, especially in operations close to the stall limit.","PeriodicalId":423666,"journal":{"name":"Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130845289","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Tip Flow Control in Optimized Large Gas Turbine Compressor Blading 大型燃气轮机压气机叶片优化叶尖流动控制
Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics Pub Date : 2022-06-13 DOI: 10.1115/gt2022-83374
Katja Hummel, Anton Streit, D. Peitsch
{"title":"Tip Flow Control in Optimized Large Gas Turbine Compressor Blading","authors":"Katja Hummel, Anton Streit, D. Peitsch","doi":"10.1115/gt2022-83374","DOIUrl":"https://doi.org/10.1115/gt2022-83374","url":null,"abstract":"\u0000 In transonic axial compressors of gas turbines, casing treatments (CTs) have the capability to improve the stability and delay stall. A full comprehension of the stall mechanism is essential to design a beneficial CT. Tip stall is a prerequisite. Most CT investigations and publications investigate flight propulsion applications. There is a need for detailed investigations in stationary large gas turbines concerning stability optimization. Typically, the tip gaps in the front stages are — relative to the blade span — by one magnitude smaller than for aero engines. This is due to the large absolute dimensions.\u0000 The goal of the present study is to increase the operating range towards stall without losing efficiency at design point conditions. Axisymmetric active and passive CT types are investigated.\u0000 The model is based on an optimized tip critical rotor design, which matches the boundary conditions of a large gas turbine. Most other investigations from the last decades are conducted for known airfoil shapes that were not automatically optimized for their operating conditions. A tip flow control was developed to improve the stability limits. The numerical investigations are carried out on a single rotor optimization using RANS simulations.\u0000 The study investigates in depth the ability of axisymmetric grooves with and without mass injection to postpone stall. It is shown why passive circumferential grooves do not improve the stability for the specific blade geometry. It is essential to quantify the influence of the axisymmetric types of CT onto the rotor tip flow especially for near stall conditions. Of particular interest is how the circumferential grooves perform when used in combination with mass injection. The results show that for this aerodynamically optimized rotor, a mass injection is needed to energize the tip leakage and therefore reduce the blockage. Passive circumferential grooves do not increase the stability. The injection of 1% stall mass flow rises the stall margin by 15% only with little losses.","PeriodicalId":423666,"journal":{"name":"Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics","volume":"36 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115453644","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Design of a Blowing Type Flow Treatment to Complement Casing Treatments for Compact High-Pressure Compressor Rear Stages 对紧凑型高压压缩机后级机匣处理补充的吹流式处理设计
Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics Pub Date : 2022-06-13 DOI: 10.1115/gt2022-78311
Christian P. Köhler, C. Kendall-Torry, Christian Helcig, V. Gümmer
{"title":"Design of a Blowing Type Flow Treatment to Complement Casing Treatments for Compact High-Pressure Compressor Rear Stages","authors":"Christian P. Köhler, C. Kendall-Torry, Christian Helcig, V. Gümmer","doi":"10.1115/gt2022-78311","DOIUrl":"https://doi.org/10.1115/gt2022-78311","url":null,"abstract":"\u0000 A common way to increase the operating range of rotor tip limited compressor configurations is the application of casing treatments (CT). However, the resulting strengthening of the rotor tip flow is accompanied by a radial re-balancing effect in the compressor’s flow path. This effect weakens the hub regions downstream of the CT. Consequently, a premature compressor stall can occur near the compressor hub. This paper presents the numerical design efforts for a hub strengthening flow treatment to leverage the potential of CTs within a compact high-pressure compressor (HPC) rear stage concept. A baseline HPC stage with large rotor tip clearances and stage loading is used as a starting point. An increase in compressor operating range substantiates within the rotor tip critical baseline HPC as axial slot CTs are applied. However, a premature stall initiation at the downstream stator hub occurs due to the radial re-balancing effect caused by the CT. Hence, a blowing-type flow treatment (FT) is introduced to delay the formation of the hub corner stall. Different geometrical variations of this FT type are tested numerically via a design of experiments (DoE). Finally, URANS simulations utilize this FT together with CTs to assess the changes in compressor operating behavior. The simulations show an enhancement of the stator operability due to a delay of the onset of the hub corner stall. By applying additional FTs, the adverse effects of the CT on the downstream stator can be partially compensated, and the potential of the HPC design can be leveraged.","PeriodicalId":423666,"journal":{"name":"Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics","volume":"38 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128248932","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Effect of the Axial Compressor Tip Clearance Size: Performance and Transition to Rotating Stall 轴向压气机叶尖间隙大小的影响:性能和转失速的过渡
Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics Pub Date : 2022-06-13 DOI: 10.1115/gt2022-80914
Clémence Rannou, A. Dazin, J. Marty, G. Tanguy, L. Castillon, J. Moubogha
{"title":"Effect of the Axial Compressor Tip Clearance Size: Performance and Transition to Rotating Stall","authors":"Clémence Rannou, A. Dazin, J. Marty, G. Tanguy, L. Castillon, J. Moubogha","doi":"10.1115/gt2022-80914","DOIUrl":"https://doi.org/10.1115/gt2022-80914","url":null,"abstract":"\u0000 The leakage flow that is developed between the rotor and the casing of an axial compressor is usually associated with losses and can promote the arising of rotating stall. During its life, an axial compressor can be subject to a variation of the tip clearance due to the aging of the machine, which can modify the leakage flow and affect its performance. The prediction of the tip leakage flow and of its evolution with gap size is thus essential to estimate correctly the performance and operability of a compressor stage. The support of this study is a single stage compressor for which three different gap size ratios R=τc=3.4%, defined by the tip gap size τ over the axial chord c) are considered (R = 0.6 %, 1.2 %, 2.4 %). Reynolds Averaged Navier-Stokes (RANS) simulations are performed on the three configurations. The analysis is performed with two types of computational domains (a single blade-channel and one tenth of the full annulus geometry). The aim is to identify the configuration which provides reliable results at the most reasonable computational cost. Then, a numerical study on the effect of the tip gap size on the performance and flow topology of the compressor is conducted, especially at near stall operating conditions.","PeriodicalId":423666,"journal":{"name":"Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics","volume":"62 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126305889","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Simulating Stall Inception in a High-Performance Fan With Clean and Distorted Inlets 具有清洁和扭曲进气道的高性能风扇的失速开始模拟
Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics Pub Date : 2022-06-13 DOI: 10.1115/gt2022-82031
Andrew M. Bedke, Tyler Adams, S. Gorrell
{"title":"Simulating Stall Inception in a High-Performance Fan With Clean and Distorted Inlets","authors":"Andrew M. Bedke, Tyler Adams, S. Gorrell","doi":"10.1115/gt2022-82031","DOIUrl":"https://doi.org/10.1115/gt2022-82031","url":null,"abstract":"\u0000 The effect of distorted inflow on jet engine fan stability is an important consideration in both commercial and high performance aircraft applications. Novel commercial aircraft configurations offer significant reductions in fuel burn, but require engine fans to continuously operate with severe amounts of inlet distortion. Complex inlet ducts in high performance aircraft also result in distorted flow at the fan inlet. This paper investigates and compares the mechanisms of stall inception for cases of both clean and distorted inlet flow. Unsteady RANS simulations of stall inception in a high performance transonic fan were obtained for both cases. In both instances, the mechanism for stall inception is shown to be interactions between the detached bow shock and the tip clearance vortex, which causes the formation of two vortices within the blade passage. The location and strength of these vortices both affect the LE spillage into the adjacent blade rows. When inlet distortion is present, mass redistribution upstream of the fan results in variations in rotor incidence. An area of high incidence is located outside the circumferential extent of the applied distorted sector. In the high incidence region, the shock is detached 3.9%–8.1% chord more than the clean inlet case, making LE spillage more likely. The same mechanisms of stall inception are observed when distortion is present. However, the severity of the stalling phenomena is more pronounced within the high incidence region of the annulus. A rotating stall cell grows out of the stalled passages present at the near-stall operating point and ultimately extends 59% chord upstream of the LE and 18.7% span radially. Understanding the effect of distortion on the mechanisms of stall inception will allow appropriate steps to be taken to extend the stable operating range of modern commercial and high performance fans.","PeriodicalId":423666,"journal":{"name":"Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics","volume":"9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122592404","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书