{"title":"Distributed localization in sensor networks with communication and measurement noises","authors":"Fei Wu, Yu-Ping Tian, Bo Wang","doi":"10.1109/ASCC.2017.8287475","DOIUrl":"https://doi.org/10.1109/ASCC.2017.8287475","url":null,"abstract":"The localization problem for sensor networks with communication and measurement noises is studied in this paper. A robust distributed iterative algorithm called ECHO-CMN is presented based on the signed barycentric coordinate representation, which can be calculated only by relative distance measurements. In the algorithm, a dither is added to the sensor states before quantization to randomize the quantization error. To attenuate the communication noise, a gain parameter which decays to zero is used. An unbiased distance estimator is constructed, and nodes can take advantage of the estimator to update the distance estimation before each localization iteration. It can be proved that ECHO-CMN converges to the exact location of each sensor almost surely under some mild assumptions on the noise. Numerical studies illustrate the proposed localization algorithm.","PeriodicalId":413201,"journal":{"name":"2017 11th Asian Control Conference (ASCC)","volume":"50 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115359677","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
D. Moser, Zahra Ramezani, Davide Gagliardi, Jinwei Zhou, L. Re
{"title":"Risk functions oriented autonomous overtaking","authors":"D. Moser, Zahra Ramezani, Davide Gagliardi, Jinwei Zhou, L. Re","doi":"10.1109/ASCC.2017.8287310","DOIUrl":"https://doi.org/10.1109/ASCC.2017.8287310","url":null,"abstract":"This paper presents control formulations which integrate safety indicators as time headway and time to collision in the context of autonomous overtaking. Simulations via a traffic scenario in the high fidelity vehicle simulator IPG CarMaker are used to confirm the validity of the method. Some simple considerations allow to highlight the differences, in particular the time headway formulation is better suitable to guarantee safety in the case of very strong unexpected deceleration of preceding vehicles, while the time to collision approach precedes to similar safety for normal up to high deceleration of the other traffic participants, while offering much better comfort and fuel efficiency. Time headway precedes also to larger inter-vehicle distances, which represent a possible drawback in terms of capacity of the roads but may also make the approach useless in practice, as other drivers may enter into this space and thus remove the advantages of the time headway approach. As a conclusion, a combination of both approaches is suggested.","PeriodicalId":413201,"journal":{"name":"2017 11th Asian Control Conference (ASCC)","volume":"83 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115485542","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Towards the realtime sampling-based kinodynamic planning for quadcopters","authors":"Menglu Lan, Shupeng Lai, Ben M. Chen","doi":"10.1109/ASCC.2017.8287268","DOIUrl":"https://doi.org/10.1109/ASCC.2017.8287268","url":null,"abstract":"This paper presents a sampling-based kinodynamic planning algorithm for quadcopters which have a high dimensional state space amid state constraints. The proposed approach utilizes BIT∗ as the main planner to perform the ordered search directly in state space, without decoupling the geometric and dynamic constraints. Instead of using a general BVP solver for non-trivial local steering problem, a neural network based approximation is adopted to boost the computational efficiency. The potential of the proposed approach towards a real-time onboard implementation is demonstrated by various simulations and a real flight test.","PeriodicalId":413201,"journal":{"name":"2017 11th Asian Control Conference (ASCC)","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124494051","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Robust visual tracking via occlusion detection based on staple algorithm","authors":"Xiaoguang Niu, Xingqi Fang, Yu Qiao","doi":"10.1109/ASCC.2017.8287316","DOIUrl":"https://doi.org/10.1109/ASCC.2017.8287316","url":null,"abstract":"In this paper, we propose a novel algorithm to handle occlusions for robust visual object tracking. For a robust and adaptive tracking algorithm, it is critical to distinguish occlusions from target appearance variations. Occlusions are introduced in the 3-D scene to 2-D plane projection process and usually correspond to interactions between the target and the background. In our algorithm, we exploit temporal and spatial context information to identify the occurrence of occlusions. We implement the proposed occlusion detection scheme based on Staple algorithm [2], which is an efficient and accurate tracking algorithm. Besides the tracker to estimate the state of the target, we also investigate the background patches around the target with trackers to monitor their interaction with the target. If occlusions are detected, the current target model stops updating. Comprehensive experiments on benchmark OTB-2013 show that our strategy can detect occlusions correctly and therefore enable the proposed tracking algorithm robust to occlusions.","PeriodicalId":413201,"journal":{"name":"2017 11th Asian Control Conference (ASCC)","volume":"6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115126875","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Mean-square stabilization for a class of discrete-time systems with random delay","authors":"Junhui Li, Jieying Lu, W. Su","doi":"10.1109/ASCC.2017.8287287","DOIUrl":"https://doi.org/10.1109/ASCC.2017.8287287","url":null,"abstract":"This paper investigates the mean-square stabilization via output feedback for a networked linear time-invariant discrete time feedback system. The control signal is transmitted over a communication channel with multi-step random delay. It is assumed that the probability mass function of random delay steps is known and the sequence of random delay steps is an independent and identically distributed process. It is turned out from our previous results in mean-square stability of the system that this mean-square stabilization problem is a standard H2 optimal control problem. The resulting optimal controller which is determined by the transfer function of the system and stochastic properties of the random delay step process yields the largest stable margin for the closed-loop stochastic system in mean-square sense. The mean-square stabilizing controller is presented in terms of the solutions of two discrete algebraic Riccati equations (DAREs). In addition, a numerical example is given to illustrate the results in this work.","PeriodicalId":413201,"journal":{"name":"2017 11th Asian Control Conference (ASCC)","volume":"78 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114971689","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Alexander W. Zollitsch, N. Mumm, Simona Wulf, F. Holzapfel, Markus Hochstrasser, Patrick J. Lauffs, L. Peter
{"title":"Automatic takeoff of a general aviation research aircraft","authors":"Alexander W. Zollitsch, N. Mumm, Simona Wulf, F. Holzapfel, Markus Hochstrasser, Patrick J. Lauffs, L. Peter","doi":"10.1109/ASCC.2017.8287427","DOIUrl":"https://doi.org/10.1109/ASCC.2017.8287427","url":null,"abstract":"The paper presents an automatic takeoff control system for a general aviation research aircraft, specifically a modified Diamond Aircraft Industries DA42 M-NG. The takeoff system is part of a modular control architecture, capable of full automatic flight from takeoff to landing. To conduct the takeoff, functionalities provided by existing modules of the control system were efficiently utilized. In the design, emphasis was placed on a safe activation and automatic abort criteria. The takeoff maneuver was split into distinct phases, which were implemented as states in a state machine. For each phase, the control modes and transition criteria are presented in detail. The proposed system was successfully demonstrated in several flight tests. The results show the performance of the system under real operating conditions. Building on an existing automatic control system, it is demonstrated that the automation of a takeoff can be accomplished without the need for dedicated controller design.","PeriodicalId":413201,"journal":{"name":"2017 11th Asian Control Conference (ASCC)","volume":"60 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116867264","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Constrained motion tracking control system for medical device","authors":"Jun Yik Lau, Wenyu Liang, K. Tan","doi":"10.1109/ASCC.2017.8287098","DOIUrl":"https://doi.org/10.1109/ASCC.2017.8287098","url":null,"abstract":"This paper presents a robust impedance control methodology for constrained motion tracking control of medical device. The control methodology is proposed for desired motion and force trajectories tracking in the presence of uncertain system parameters, nonlinearities including hysteresis effect, and external disturbances in the control system. In this paper, a ventilation tube applicator (VTA) designed for an ear surgery is investigated. A dynamic model is established for the formulation of the proposed motion control methodology. Desired motion and force trajectories are controlled to achieve a desired generalised impedance. The stability of the motion control system is proven theoretically with the convergence of the tracking error to zero is assured under the aforementioned conditions. A tracking performance following the desired trajectories is presented in the experimental study. The proposed control methodology can be leveraged in high performance medical applications or similar applications.","PeriodicalId":413201,"journal":{"name":"2017 11th Asian Control Conference (ASCC)","volume":"40 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116271240","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ryosuke Sato, K. Fujiwara, M. Tani, Junichi Mori, J. Ise, K. Harada, M. Kano
{"title":"Causal analysis based on non-time-series kernel Granger causality in a steelmaking process","authors":"Ryosuke Sato, K. Fujiwara, M. Tani, Junichi Mori, J. Ise, K. Harada, M. Kano","doi":"10.1109/ASCC.2017.8287443","DOIUrl":"https://doi.org/10.1109/ASCC.2017.8287443","url":null,"abstract":"In the manufacturing industry, it is extremely important to identify variables that affect product quality. Identifying variables which affect quality variables is called causal analysis. In batch processes, time-series data of process variables and the corresponding data of quality variables are generally acquired. Since causal analysis using the raw data needs a large computation load, it is often performed after compressing time-series process variables data into non-time-series feature variables data. Various causal analysis methods using such data have been developed, however, none have shown effective results in actual plants. In the present work, non-time-series kernel Granger causality (NTS-KGC) is proposed for causal analysis with non-time-series data of batch processes. This is a method that kernel Granger causality [1], which is used for causal analysis with time-series data in nonlinear systems, is expanded for causal analysis with non-time-series data. The validity of the proposed method is demonstrated through a numerical example of a nonlinear batch process. In addition, we conducted a case study of applying NTS-KGC to data obtained from a real steelmaking process. The results demonstrate that NTS-KGC is superior to other existing methods using the following indexes, i.e. variable influence on projection (VIP) of partial least squares (PLS), regression coefficients of PLS, and variable importance of Random Forest.","PeriodicalId":413201,"journal":{"name":"2017 11th Asian Control Conference (ASCC)","volume":"19 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123390328","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Motion planning for a knife-edge on the surface of a hyperboloid","authors":"Muhammad Rehan, M. Reyhanoglu, H. Mcclamroch","doi":"10.1109/ASCC.2017.8287363","DOIUrl":"https://doi.org/10.1109/ASCC.2017.8287363","url":null,"abstract":"This paper presents a motion planning strategy for a knife-edge moving on the surface of a hyperboloid. First, kinematics equations for the knife-edge are developed without the use of local coordinates so that the mathematical model is globally defined and have no singularities or ambiguities. Then, a novel motion planning algorithm has been constructed using the concept of ruled surfaces. The computer simulations demonstrate the effectiveness of the algorithm for any initial and final position/direction of the knife-edge on the surface of the hyperboloid.","PeriodicalId":413201,"journal":{"name":"2017 11th Asian Control Conference (ASCC)","volume":"10 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121891116","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Intrinsically stable realization of a resonant current regulator for a single phase inverter","authors":"L. McNabb, Liuping Wang, B. Mcgrath","doi":"10.1109/ASCC.2017.8287526","DOIUrl":"https://doi.org/10.1109/ASCC.2017.8287526","url":null,"abstract":"AC current regulation in a single phase inverter is predicated on the ability of a resonant controller to effectively track a sinusoidal reference signal with a nominal frequency dependent on the application. Due to the presence of poles residing in a marginally stable location of the complex plane, the explicit implementation of resonant regulators is subject to unbounded dynamic excitation in the event of the control signal entering the non-linear saturation region. Addressing this issue, it is proposed within this paper that an amalgamated approach is taken to the design and implementation of a resonant controller for a single phase current regulator with an intrinsic stable implementation form that naturally avoids the use of marginally stable dynamic states. Using a disturbance observer, the presented method embeds a pair of marginally stable poles in the closed form of the controller, constituting the resonant action. As a consequence, this allows accurate tracking of a sinusoidal reference signal whilst retaining a stable realization of the implementation form. Simulation results are presented to demonstrate the efficacy of the proposed approach. Experimental results are currently being investigated.","PeriodicalId":413201,"journal":{"name":"2017 11th Asian Control Conference (ASCC)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125726278","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}