{"title":"MCM-based implementation of block FIR filters for high-speed and low-power applications","authors":"P. Meher, Yu Pan","doi":"10.1109/VLSISoC.2011.6081653","DOIUrl":"https://doi.org/10.1109/VLSISoC.2011.6081653","url":null,"abstract":"Block finite impulse response (FIR) digital filters have potential for high-speed and low-power realization through parallel processing. In this paper, we suggest an efficient implementation of block FIR filters using multiple constant multiplication (MCM) technique. Constant multiplication methods are widely used for reducing computational complexity of implementation of FIR filters. Sub-expression sharing for single constant multiplications can be performed for direct-form as well as transposed direct-form structures of FIR filters, while MCM techniques are not applicable to the direct-form FIR structure. On the other hand block FIR filters cannot be implemented in transposed direct-form. In this paper, we have shown that MCM can be used for direct-form implementation block FIR filters. Experimentation on block filters for filter orders 8 and 16 of different block lengths indicates that, compared to sample-by-sample MCM based transposed direct-form filters, the maximum sampling rate and energy delay product may be improved by up to 3.5 and 7.6 times respectively due to aggressive parallelization of block processing. It is also found that by using MCMs, up to 20% total area may be reduced compared to straightforward block filter implementation.","PeriodicalId":412989,"journal":{"name":"2011 IEEE/IFIP 19th International Conference on VLSI and System-on-Chip","volume":"42 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127458618","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
G. Zhong, Hongbin Zheng, ZhenHua Jin, Dihu Chen, Zhiyong Pang
{"title":"1024-point pipeline FFT processor with pointer FIFOs based on FPGA","authors":"G. Zhong, Hongbin Zheng, ZhenHua Jin, Dihu Chen, Zhiyong Pang","doi":"10.1109/VLSISoC.2011.6081654","DOIUrl":"https://doi.org/10.1109/VLSISoC.2011.6081654","url":null,"abstract":"Design and optimized implementation of a 16-bit and 32-bit 1024-point pipeline FFT processor is presented in this paper. The architecture of the FFT is based on R22SDF algorithm with new pointer FIFO embedded with gray code counters. It is implemented in Spartan-3E, Spartan-6 and Virtex-4 devices and fully tested by method of co-simulation using SMIMS® VeriLink® as a bridge that connects software(Matlab® Simulink®) and real hardware-FPGA targets. The implementation results show that our pointer FIFO FFT processor could use lower resource, but achieve higher performance. Our 16-bit 1024-point FFT processor only costs 2580 slices, 2030 slice flip flops and just 2 block RAMs, achieving the maximum clock frequency of 92.6 MHz with the throughput per area of 0.035 Msamples/s/area. Due to the parameterized input wordlength, output wordlength, Twiddle Factors wordlength and processing stages, it is easily to implement a 16-point, 64-point, 256-point, 1024-point,4096-point or higher power of 4 points pointer FIFO FFT processor synthesized from the same code just through modifying the corresponding parameters.","PeriodicalId":412989,"journal":{"name":"2011 IEEE/IFIP 19th International Conference on VLSI and System-on-Chip","volume":"26 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125043724","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Kwan, Sichao Song, Xing Lu, Lei Lu, Y. Teh, Y. Teh, E. Chong, Yan Gao, W. Hau, Fan Zeng, M. Wong, Chunmei Huang, A. Taniyama, Y. Makino, S. Nishino, T. Tsuchiya, O. Tabata
{"title":"Designs for improving the performance of an electro-thermal in-plane actuator","authors":"A. Kwan, Sichao Song, Xing Lu, Lei Lu, Y. Teh, Y. Teh, E. Chong, Yan Gao, W. Hau, Fan Zeng, M. Wong, Chunmei Huang, A. Taniyama, Y. Makino, S. Nishino, T. Tsuchiya, O. Tabata","doi":"10.1109/VLSISoC.2011.6081641","DOIUrl":"https://doi.org/10.1109/VLSISoC.2011.6081641","url":null,"abstract":"Reported presently are two designs to improve the performance of a “chevron” electro-thermal in-plane actuator. One incorporates beams with uniform cross-sections but nonuniform lengths and tilt angles to accommodate the thermally induced expansion of the “shuttle”; the other incorporates beams with non-uniform cross-sections to achieve a wider spread of the high temperature “expansion” regions of the beams. With the product of the actuation force and displacement defined as a figure-of-merit, it is verified using finite-element simulation that the incorporation of non-uniform lengths and tilt angles, and non-uniform beam cross-sections leads to respective improvement of 10 and 65% in the figure-of-merit. The effectiveness of these designs was also tested by micro-fabricating actuators occupying fixed device areas.","PeriodicalId":412989,"journal":{"name":"2011 IEEE/IFIP 19th International Conference on VLSI and System-on-Chip","volume":"10 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125668852","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Clockless asynchronous delta modulator based ADC for smart dust applications","authors":"V. N. Manyam, D. Chhetri, J. Wikner","doi":"10.1109/VLSISoC.2011.6081602","DOIUrl":"https://doi.org/10.1109/VLSISoC.2011.6081602","url":null,"abstract":"In this paper, design of an asynchronous clockless delta modulator based analog-to-digital converter (ADC) is presented. The ADC employs level-crossing sampling technique. The ADC system is in the context of low speed smart dust sensor applications. For smart dust the benefit with continuous-time clockless system is its reduced hardware and lesser quantization noise power in the frequency band of interest. Further, the unbuffered, segmented resistor-string digital-to-analog converter (DAC) used in the ADC, results in component savings compared to previously reported resistor string DAC. High level simulation results are shown for various ADC resolutions. The signal-to-noise and distortion ratio (SNDR) achieved for an 8-bit and 4-bit ADC systems are presented. It has been shown that a 4-bit system with the proposed segmented resistor string DAC architecture utilizes hardware for a 3-bit system and achieves an ENOB of more than five bits.","PeriodicalId":412989,"journal":{"name":"2011 IEEE/IFIP 19th International Conference on VLSI and System-on-Chip","volume":"24 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122058045","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Topology synthesis of analog circuits with yield optimization and evaluation using pareto fronts","authors":"Oliver Mitea, M. Meissner, L. Hedrich","doi":"10.1109/VLSISoC.2011.6081651","DOIUrl":"https://doi.org/10.1109/VLSISoC.2011.6081651","url":null,"abstract":"This paper presents a tool for automatic analog topology generation and subsequent sizing. For this purpose a multistage design flow has been developed. To synthesize new circuit topologies according to a set of given specifications, a hierarchical algorithm composes the circuits using a library of basic building blocks. A set of constraints ensures an electrically reasonable interconnection of the blocks. In the next step all generated circuits are preselected by symbolic analysis methods. The following sizing is executed with SPICE accuracy. Three main extensions are applied, compared to previous approaches. First, the symbolic analysis methodology has been improved. Second, a yield optimization has been included to the sizing step. Third, an automated evaluation of hundreds successfully sized circuits is realized through searching for the pareto optimal designs. Results are shown through two different synthesis runs, generating operational amplifier topologies.","PeriodicalId":412989,"journal":{"name":"2011 IEEE/IFIP 19th International Conference on VLSI and System-on-Chip","volume":"53 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128428040","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A subthreshold digital maximum power point tracker for micropower piezoelectric energy harvesting applications","authors":"Joseph Sankman, D. Ma","doi":"10.1109/VLSISoC.2011.6081610","DOIUrl":"https://doi.org/10.1109/VLSISoC.2011.6081610","url":null,"abstract":"Utilizing piezoelectric energy harvesting to power autonomous wireless sensors has garnered significant attention recently. However, because the generated power for small form-factor piezoelectric devices is on the order of 10 µW, the use of maximum power point tracking (MPPT) is imperative. Moreover, minimizing the power consumption of the maximum power point tracker is essential to increase the available power for the wireless sensor. To resolve this challenge, a digital MPPT controller is presented in this paper that is designed using subthreshold operation techniques. The MPPT controller is implemented and verified using a CMOS 0.35-µm process. The maximum power point tracker operates with a 1-V supply, consuming 3.71 µW while active. In addition, the proposed MPPT controller operates with 99.5% tracking efficiency.","PeriodicalId":412989,"journal":{"name":"2011 IEEE/IFIP 19th International Conference on VLSI and System-on-Chip","volume":"abs/2005.13738 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128587739","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Janet Roveda, Susan Lysecky, Y. Son, Hyungtaek Chang, A. Annamalai, Xiao Qin
{"title":"Interface model based cyber-physical energy system design for smart grid","authors":"Janet Roveda, Susan Lysecky, Y. Son, Hyungtaek Chang, A. Annamalai, Xiao Qin","doi":"10.1109/VLSISoC.2011.6081611","DOIUrl":"https://doi.org/10.1109/VLSISoC.2011.6081611","url":null,"abstract":"Energy harvesting is becoming one of the most important issues today due to the fast depletion of conventional energy resources. Current research efforts focus on efficient and reliable use of renewable resources such as solar, hydro, wind, and thermal resources to provide environmentally friendly solutions while minimizing the cost. However, an efficient and effective delivery of green energy to individual households remains a challenging issue. One key roadblock is the high complexity of the smart grid system. In this paper, we propose a new interface theory based energy-timing model for smart homes and smart grid management and design. This model allows simple yet accurate computations for energy supply and consumptions involved with photovoltaic (PV) cells, storage units, and load appliances for each home. At community, and city or state level (or nationwide), this model also has the potential to facilitate fast and effective energy management, optimization, and load scheduling. The end result is the possibility of managing smart grid with millions of households to achieve low cost and high energy savings","PeriodicalId":412989,"journal":{"name":"2011 IEEE/IFIP 19th International Conference on VLSI and System-on-Chip","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128975125","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Design and analysis of on-chip charge pumps for micro-power energy harvesting applications","authors":"W. Ki, Yan Lu, Feng Su, C. Tsui","doi":"10.1109/VLSISoC.2011.6081612","DOIUrl":"https://doi.org/10.1109/VLSISoC.2011.6081612","url":null,"abstract":"Charge balance law based on conservation of charge is stated and employed to analyze charge pumps. For micro-power on-chip implementations, both the positive-plate and the negative-plate parasitic capacitors have to be considered. A first iteration approximation analysis is proposed to analyze charge pumps with parasitic capacitors. Using a 0.35µm CMOS process, 8X linear, Fibonacci and exponential charge pumps are designed and their performances are compared and confirmed by simulations.","PeriodicalId":412989,"journal":{"name":"2011 IEEE/IFIP 19th International Conference on VLSI and System-on-Chip","volume":"14 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124450562","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A more efficient arrangement of the sparse LU factorization for the large-scale circuit analysis","authors":"J. Dobes, D. Cerny, A. Yadav","doi":"10.1109/VLSISoC.2011.6081619","DOIUrl":"https://doi.org/10.1109/VLSISoC.2011.6081619","url":null,"abstract":"In the paper, an efficient and reliable algorithm for solving the circuit nonlinear algebraic-differential equations based on a sophisticated arrangement of Newton interpolation polynomial is characterized first. After that, a novel method is introduced for improving the convergence with four suggested criteria that are being compared. Unlike the similar algorithms focused on an operating point analysis only, the proposed method also works in a transient analysis. For enhancing the efficiency of repeated solutions of linear systems necessary in the Newton-Raphson method, a novel modification of the Markowitz criterion is suggested, which is compatible with the fast modes of the LU factorization. The modified criterion consists in an estimation of probabilities of the fill-in enlargement. The probabilities are determined for all columns of the system matrix before the LU factorization, where the column probability is calculated as the average value of the probabilities for all the column elements. Finally, the columns are reordered so that first and last should be those with the minimum and maximum probabilities, respectively. As a verification of this fundamental proposal of the paper, a comprehensive set of numerical tests has been carried out.","PeriodicalId":412989,"journal":{"name":"2011 IEEE/IFIP 19th International Conference on VLSI and System-on-Chip","volume":"97 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134091132","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"FPGA implementation of high sampling rate in-car non-stationary noise cancellation based on adaptive Wiener filter","authors":"Hong-Yuan Jheng, Yen-Hsiang Chen, S. Ruan, Z. Qi","doi":"10.1109/VLSISoC.2011.6081652","DOIUrl":"https://doi.org/10.1109/VLSISoC.2011.6081652","url":null,"abstract":"This paper presents the architecture and implementation of a real-time adaptive Wiener filter for non-stationary noise cancellation in a car environment. The Wiener filter has been implemented in a Xilinx Virtex-5 chip and the target device is chosen as xc5vlx110t. The proposed design can filter each 32 samples within 918 micro seconds. The peak sampling rate is estimated to be 88.6KHz. The performance of proposed design is measured as 15.85dB noise reduction.","PeriodicalId":412989,"journal":{"name":"2011 IEEE/IFIP 19th International Conference on VLSI and System-on-Chip","volume":"34 1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-11-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133119430","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}