发布求助
文献互助 智能选刊 最新文献

Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066)最新文献

筛选
英文 中文
Digital realisation of sensorless drive: some practical considerations 无传感器驱动的数字化实现:一些实际考虑
Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066) Pub Date : 1997-11-09 DOI: 10.1109/IECON.1997.672127
T. Song, M.F. Rahman, K. Lim
{"title":"Digital realisation of sensorless drive: some practical considerations","authors":"T. Song, M.F. Rahman, K. Lim","doi":"10.1109/IECON.1997.672127","DOIUrl":"https://doi.org/10.1109/IECON.1997.672127","url":null,"abstract":"This paper describes some real time filtering issues in the realisation of sensorless control. Though many sensorless control algorithms have now been proposed in the literature, fewer complete closed loop implementations have been reported. Part of the reason is that the step of closing the control loop with estimated variables imposes strong demands on the quality of the estimates. This paper describes two filtering solutions with low computational cost requirements. The solutions are compared on an experimental setup using the authors' algorithm for position estimation in a permanent magnet synchronous motor.","PeriodicalId":404447,"journal":{"name":"Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066)","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1997-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125716047","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Fundamental research on human interface devices for physically handicapped persons 残疾人人机界面装置的基础研究
Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066) Pub Date : 1997-11-09 DOI: 10.1109/IECON.1997.668498
S. Fujisawa, K. Ohkubo, T. Nishi, T. Yoshida, Y. Shidama, H. Yamaura
{"title":"Fundamental research on human interface devices for physically handicapped persons","authors":"S. Fujisawa, K. Ohkubo, T. Nishi, T. Yoshida, Y. Shidama, H. Yamaura","doi":"10.1109/IECON.1997.668498","DOIUrl":"https://doi.org/10.1109/IECON.1997.668498","url":null,"abstract":"The mouse for a personal computer is now replacing the keyboard for computer input devices, due to it's ease of use and the progress of operation systems. A mouse is easy for a nondisabled person to operate, however not so easy for a handicapped person. In particular, a cerebral paralyzed person and a proximal spine injured person often have much difficulty in dealing with a mouse or can't use it at all. However, a person with a C4 injured spinal nerve is able to bend, stretch and rotate his neck and also able to raise his shoulders because the functions of his sternodeidomastoid and trapezius muscles remain. For those people, the authors have developed an input system using neck and shoulder motions instead of manual input by a mouse. In this study, two kinds of devices using limit switches and linear potentiometers were developed and both of the results were compared. As operability has to be improved, practical usefulness for the handicapped person was confirmed. Finally, the feasibility of such systems being used for the driving wheel-chairs was examined.","PeriodicalId":404447,"journal":{"name":"Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066)","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1997-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132527965","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 22
A method of tracing disordered cords 一种追踪无序声带的方法
Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066) Pub Date : 1997-11-09 DOI: 10.1109/IECON.1997.668528
S. Ishikawa, J. Tan
{"title":"A method of tracing disordered cords","authors":"S. Ishikawa, J. Tan","doi":"10.1109/IECON.1997.668528","DOIUrl":"https://doi.org/10.1109/IECON.1997.668528","url":null,"abstract":"The present paper describes a technique for analyzing a disordered cord. We often put disordered cords in order or undo knots out of necessity. To automate this routine by an intelligent machine, a cord needs to be traced from one end to the other. This paper proposes a technique for realizing the trace employing consistent labeling and a distance index. Image processing of a disordered cord provides the description of the cord by its subareas called cord areas. Relations among the cord areas are formulated in terms of consistent labeling. Solutions of the consistent labeling problem give candidates for possible trace routes and a unique route is found by the calculation of a distance index. Experimental results show satisfactory performance of the proposed technique.","PeriodicalId":404447,"journal":{"name":"Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066)","volume":"3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1997-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129992467","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
New low loss quasi-parallel resonant DC-link inverter with lossless variable zero voltage duration 新型低损耗准并联谐振零电压持续时间无损可变直流逆变器
Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066) Pub Date : 1997-11-09 DOI: 10.1109/IECON.1997.671777
Kyung-Ahn Kwon, K.H. Kim, Yong-Chae Jung, M. Park
{"title":"New low loss quasi-parallel resonant DC-link inverter with lossless variable zero voltage duration","authors":"Kyung-Ahn Kwon, K.H. Kim, Yong-Chae Jung, M. Park","doi":"10.1109/IECON.1997.671777","DOIUrl":"https://doi.org/10.1109/IECON.1997.671777","url":null,"abstract":"A new low loss quasi-parallel resonant DC-link (NLQPRDCL) inverter which shows highly improved PWM capability, low loss characteristic and low voltage stress is presented. A method to minimize freewheeling interval, which is able to largely decrease DC-link operation losses and to steadily guarantee soft switching in the wide operation region is proposed. In addition, lossless control of zero voltage duration of the DC-link makes the proposed inverter maintain the advanced PWM capability even under a very low modulation index. Simulation and experiment are performed to verify the validity of the proposed inverter.","PeriodicalId":404447,"journal":{"name":"Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066)","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1997-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134423330","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
A speed sensorless induction motor vector control system using q-axis flux with parameter identification 基于q轴磁链参数辨识的无速度传感器异步电机矢量控制系统
Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066) Pub Date : 1997-11-09 DOI: 10.1109/IECON.1997.672120
M. Tsuji, Shuo Chen, K. Izumi, T. Ohta, E. Yamada
{"title":"A speed sensorless induction motor vector control system using q-axis flux with parameter identification","authors":"M. Tsuji, Shuo Chen, K. Izumi, T. Ohta, E. Yamada","doi":"10.1109/IECON.1997.672120","DOIUrl":"https://doi.org/10.1109/IECON.1997.672120","url":null,"abstract":"In this paper, a speed sensorless vector control system for induction motors is presented, which includes rotor speed estimation and stator resistance identification. A linear model of the system is proposed to analyze the changes in observer and speed estimation gains. By computing the trajectories of poles and zeros and the transient responses, the system stability is discussed. The effectiveness is verified by digital simulation and experimental results.","PeriodicalId":404447,"journal":{"name":"Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066)","volume":"61 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1997-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131014168","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 10
Design and implementation of a 3-phase voltage stabilizer using 11-level voltage source inverter 采用11电平电压源逆变器的三相稳压器的设计与实现
Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066) Pub Date : 1997-11-09 DOI: 10.1109/IECON.1997.671823
F. Huang, P.I. Lim, E.K. Goh
{"title":"Design and implementation of a 3-phase voltage stabilizer using 11-level voltage source inverter","authors":"F. Huang, P.I. Lim, E.K. Goh","doi":"10.1109/IECON.1997.671823","DOIUrl":"https://doi.org/10.1109/IECON.1997.671823","url":null,"abstract":"Transient power dip is not allowed in certain electrical appliances. This paper presents the design and the implementation of a 3-phase voltage stabilizer using an 11-level voltage source inverter. The voltage source inverter comprises of many identical single-phase inverters. Each inverter as a modular unit has a charged capacitor as its DC source. The number of modular units is determined by the number of voltage levels required. For this project, 5 units per phase are designed which generate 11-levels. Under normal power conditions, the stabilizer is in a floating state with the capacitor fully charged. When a voltage drop is detected at the mains terminals, the stabilizer is activated. The control of the stabilizer is realized by using a TMS320C50 digital signal processor. Optimized switching times for different voltage levels are calculated off-line. Experimental results show the feasibility of this approach.","PeriodicalId":404447,"journal":{"name":"Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066)","volume":"31 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1997-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115418584","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 7
Control of a rotation-thrust drive with helical motor 螺旋电机旋转推力驱动的控制
Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066) Pub Date : 1997-11-09 DOI: 10.1109/IECON.1997.668511
L. Gobel, W. Hofmann
{"title":"Control of a rotation-thrust drive with helical motor","authors":"L. Gobel, W. Hofmann","doi":"10.1109/IECON.1997.668511","DOIUrl":"https://doi.org/10.1109/IECON.1997.668511","url":null,"abstract":"The paper is focused on a realization of a rotation-thrust drive based on a helical reluctance motor. The new actuator consists of a single three-phase stator winding system, a helical air-gap structure and a massive rotor wherein eddy-currents are induced, which can produce a torque additionally to the thrust. Special control methods with superposed rotating and alternating field components are discussed theoretically and experimental results for the stationary properties are given. Both forces are suitable for combined rotary-linear movement in two directions.","PeriodicalId":404447,"journal":{"name":"Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066)","volume":"52 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1997-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115549536","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 16
Impact of iron loss on speed estimation in sensorless vector controlled induction machines 铁损对无传感器矢量控制感应电机转速估计的影响
Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066) Pub Date : 1997-11-09 DOI: 10.1109/IECON.1997.672125
E. Levi, M. Wang
{"title":"Impact of iron loss on speed estimation in sensorless vector controlled induction machines","authors":"E. Levi, M. Wang","doi":"10.1109/IECON.1997.672125","DOIUrl":"https://doi.org/10.1109/IECON.1997.672125","url":null,"abstract":"Methods of sensorless vector control of induction machines rely on rotor speed estimation using either stator current spectral estimation techniques, or mathematical model of an induction machine in conjunction with one of the modern control methods. The first approach enables speed estimation which is independent of parameter variations in the machine. The accuracy of all the schemes that belong to the second group is however strongly affected by parameter variations. The impact of iron loss on operation of vector controlled induction machines has been examined in detail for the drives that do possess a speed sensor. The aim of this paper is to examine the impact of iron loss on accuracy of speed estimation in sensorless rotor flux oriented induction machines. The scheme elaborated in the paper is the well-known MRAC based method that relies on the mathematical model of an induction machine. Error in speed estimation is evaluated on the basis of experimentally identified iron loss for a particular machine in the speed range from zero up to twice the rated speed, in steady-state operation. It is shown that the omission of iron loss representation in the speed estimator leads to a typical speed estimation error of two to three RPM in the base speed region (for a four pole 50 Hz machine) and that the speed estimation error increases in the field-weakening region, reaching eleven RPM at twice the rated speed with rated torque command. The results of the paper show that the speed estimation error due to iron loss is comparable with speed estimation errors due to other parameter variation effects.","PeriodicalId":404447,"journal":{"name":"Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066)","volume":"150 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1997-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115595406","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 11
Power control of resistance spot welding system with high dynamic performance 高动态性能电阻点焊系统的功率控制
Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066) Pub Date : 1997-11-09 DOI: 10.1109/IECON.1997.672013
Jun Seo-Moon, Gyu-Sik Kim, Jae-Mun Kim, C. Won
{"title":"Power control of resistance spot welding system with high dynamic performance","authors":"Jun Seo-Moon, Gyu-Sik Kim, Jae-Mun Kim, C. Won","doi":"10.1109/IECON.1997.672013","DOIUrl":"https://doi.org/10.1109/IECON.1997.672013","url":null,"abstract":"In this paper, the authors attempt to control the nonlinear power control system for resistance spot welders as a fully linearized system by applying the recently developed nonlinear feedback linearization techniques based on differential geometry theories. The controller in this paper is computationally simple. In addition, easy gain tuning as well as high dynamic performance of resistance spot welding systems can be obtained. To illuminate the performance of their controller further, the authors present some simulation results.","PeriodicalId":404447,"journal":{"name":"Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066)","volume":"24 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1997-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114777119","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 11
Development and testing of prototype models of a 300 MW GTO converter for power system interconnection 电力系统互连用300mw GTO变换器样机的研制与试验
Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066) Pub Date : 1997-11-09 DOI: 10.1109/IECON.1997.671771
T. Nakajima
{"title":"Development and testing of prototype models of a 300 MW GTO converter for power system interconnection","authors":"T. Nakajima","doi":"10.1109/IECON.1997.671771","DOIUrl":"https://doi.org/10.1109/IECON.1997.671771","url":null,"abstract":"A technical project is under way in Japan to develop a high-power self-commutated converter for future DC interconnection between AC systems and HVDC transmission. In the first stage of the project, prototype models for a 300 MW GTO converter were developed. The models were subjected to factory testing to verify the technologies for series connection of multiple GTOs, a gate power supply from the main circuit, and regeneration of energy in snubber circuits. Satisfactory results were obtained.","PeriodicalId":404447,"journal":{"name":"Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066)","volume":"40 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1997-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114516204","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 9
首页 上一页 下一页 尾页
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整，为了账户安全，请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们：info@booksci.cn Book学术提供免费学术资源搜索服务，方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号：481959085
Book学术官方微信