Y. Jin, Y. Goto, Y. Nishimoto, Y. Aono, H. Naito, Y. Fukumoto, T. Yamamura, A. Iwake
{"title":"Dynamic obstacle-detecting system for railway surroundings using a highly accurate laser-sectioning method","authors":"Y. Jin, Y. Goto, Y. Nishimoto, Y. Aono, H. Naito, Y. Fukumoto, T. Yamamura, A. Iwake","doi":"10.1109/IECON.1991.238964","DOIUrl":"https://doi.org/10.1109/IECON.1991.238964","url":null,"abstract":"High accuracy was obtained in real-time measurements over the wide area around the construction gauge using a laser-sectioning method. Novel imaging optics, having a different magnifying power in the horizontal and vertical directions, allows improvement in the accuracy while keeping the field of view sufficiently wide. A real-time measurement was realized by the implementation of a pipeline video-rate processor. Experiments on the Takayama Line of the Central Japan Railway confirmed that most objects such as a platform, tunnel, or bridge could be successfully detected. The range accuracy was within 10 mm in 3 sigma at speeds up to 7 km/h and most objects could be detected at speeds up to 40 km/h.<<ETX>>","PeriodicalId":399007,"journal":{"name":"Proceedings IECON '91: 1991 International Conference on Industrial Electronics, Control and Instrumentation","volume":"24 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2002-08-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116701210","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. Uchida, Y. Toyota, H. Nakamura, S. Sagara, K. Kumamara, K. Wada, J. Murata
{"title":"Failure diagnosis for a large-scale, nonlinear and time-varying plant based on a new identification method of small variations of parameters","authors":"M. Uchida, Y. Toyota, H. Nakamura, S. Sagara, K. Kumamara, K. Wada, J. Murata","doi":"10.1109/IECON.1991.239313","DOIUrl":"https://doi.org/10.1109/IECON.1991.239313","url":null,"abstract":"A failure diagnosis system is proposed which can deal with large-scale, nonlinear, and time-varying plants. It is based on a novel identification method of small variations of parameters, which is named the SANQ (simulator-based approach to neat and quick system identification) method. The method does not require enriching input signals for the purpose of identification; with this system, one can estimate both the location and the injury of the failure neatly and quickly. In order to deal with large-scale plants, the plants are divided into small blocks. This reduces the number of parameters to be estimated at one time. The SANQ method provides estimates of the state variables of plants as well. Consequently, a model reference adaptive control system combined with the SANQ method will be a very useful scheme in recovering a faulted plant. The overall system consisting of the functions of diagnosis of a failure, estimation of dynamic property after failure, and appropriate control which leads to the ideal state will raise the reliability of the plant operation.<<ETX>>","PeriodicalId":399007,"journal":{"name":"Proceedings IECON '91: 1991 International Conference on Industrial Electronics, Control and Instrumentation","volume":"5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121063702","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"An adaptive force control of redundant manipulator based on joint acceleration controller","authors":"T. Murakami, K. Ohnisi","doi":"10.1109/IECON.1991.239147","DOIUrl":"https://doi.org/10.1109/IECON.1991.239147","url":null,"abstract":"The authors present an adaptive force controller to obtain the stable force response independently of the configuration of the redundant manipulator and the stiffness of the object. First, the joint acceleration controller is realized in the joint space. In the manipulator based on the joint acceleration controller, the motion controller in the workspace is constructed by only the consideration of the kinematics. This feature makes the effect of the configuration clear. In the proposed method, the motion controller is expanded into the adaptive force controller. Then the least-squares estimator of the unknown parameters of the object is also introduced to realize the stable force controller.<<ETX>>","PeriodicalId":399007,"journal":{"name":"Proceedings IECON '91: 1991 International Conference on Industrial Electronics, Control and Instrumentation","volume":"88 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122500478","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Control of vehicle with power wheeled steering using feedforward dynamics compensation","authors":"S. Iida, S. Yuta","doi":"10.1109/IECON.1991.238991","DOIUrl":"https://doi.org/10.1109/IECON.1991.238991","url":null,"abstract":"The design of an efficient vehicle control method for an autonomous vehicle using the power wheeled steering (PWS) method by two driving wheels is described. First, the vehicle dynamics using the PWS method is analysed. Next, an efficient controller for the PWS method is proposed. This controller includes a feedforward compensator which has the inverse dynamics of the vehicle and controls both sides of the wheel angular velocities. Additionally, in order to confirm the effectiveness of the proposed control method, numerical simulation and experimental results are shown.<<ETX>>","PeriodicalId":399007,"journal":{"name":"Proceedings IECON '91: 1991 International Conference on Industrial Electronics, Control and Instrumentation","volume":"18 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124159192","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Fuzzy control using knowledge acquired from PD control","authors":"S. Kawaji, T. Maeda, N. Matsunaga","doi":"10.1109/IECON.1991.239105","DOIUrl":"https://doi.org/10.1109/IECON.1991.239105","url":null,"abstract":"The authors propose a design method for a fuzzy controller by using knowledge acquired from proportional derivative (PD) control. Two types of fuzzy controller are presented. One is identical and the other is approximately equivalent to the PD controller. The mathematical model of the fuzzy controller is derived and the properties of the output of the fuzzy controller are clarified. A design method of the fuzzy controller which satisfies two specifications, the dynamical properties of the rising and settling regions of the response, is presented using the mathematical model.<<ETX>>","PeriodicalId":399007,"journal":{"name":"Proceedings IECON '91: 1991 International Conference on Industrial Electronics, Control and Instrumentation","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133155629","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Vibration control of flexible joint based on link velocity estimation","authors":"S. Kondo, K. Kaneko, K. Ohnishi","doi":"10.1109/IECON.1991.239343","DOIUrl":"https://doi.org/10.1109/IECON.1991.239343","url":null,"abstract":"The authors present a novel control method to suppress the torsional vibration of a flexible joint which connects the motor shaft and the driven link. To obtain the stability against the torsional vibration, it is necessary to insert an artificial damper element to some extent in the control law. Estimated link velocity is fed back for damping. This link velocity is estimated by an observer without using any sensor for the link portion. For the purpose of the estimation, an acceleration controller which is realized by a disturbance observer, is applied. The experimental results are shown to verify the proposed method.<<ETX>>","PeriodicalId":399007,"journal":{"name":"Proceedings IECON '91: 1991 International Conference on Industrial Electronics, Control and Instrumentation","volume":"109 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122618199","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Development of 3-D robot vision sensor with fiber grating: Fusion of 2-D intensity image and discrete range image","authors":"K. Nakazawa, C. Suzuki","doi":"10.1109/IECON.1991.238974","DOIUrl":"https://doi.org/10.1109/IECON.1991.238974","url":null,"abstract":"The authors describe a three-dimensional vision sensor which fuses discrete range data obtained by a FG (fiber grating) vision sensor and a 2-D intensity image obtained by a CCD (charge coupled device) camera of the sensor. The range image obtained by the sensor is coarsely sampled data. Therefore, one cannot recognize a 3-D object accurately. On the other hand, though one can get features (such as outlines, edge lines, and vertices) from an intensity image, one cannot determine their locations on 3-D space without some restrictions. To solve these problems, the authors propose a method that can recognize a 3-D object by fusing both information obtained from a discrete range image and an abstracted 2-D image.<<ETX>>","PeriodicalId":399007,"journal":{"name":"Proceedings IECON '91: 1991 International Conference on Industrial Electronics, Control and Instrumentation","volume":"136 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127396436","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A simple method for improving input power factor of single-phase UPS","authors":"J. Lee, W. Tsai, Y. Chang","doi":"10.1109/IECON.1991.239181","DOIUrl":"https://doi.org/10.1109/IECON.1991.239181","url":null,"abstract":"A simple method for improving the input power factor of a single-phase online UPS (uninterruptible power supply) by making the DC-bus capacitance as small as possible is proposed. A feedforward modulation scheme is provided for solving the rapid DC-bus voltage fluctuation problem due to insufficient filtering. A discrete-time model of the UPS with the proposed scheme and a design technique for the compensators are also developed. Finally, a laboratory prototype 1kVA single-phase online UPS is set up to experimentally verify the predicted and analyzed results. The proposed UPS features a high input power factor, fast transient response, high efficiency, light weight, and small size.<<ETX>>","PeriodicalId":399007,"journal":{"name":"Proceedings IECON '91: 1991 International Conference on Industrial Electronics, Control and Instrumentation","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121695911","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Optimal design procedure of disturbance observer based sliding mode CP control for two axis SCARA robot","authors":"H. Itoh, A. Kawamura","doi":"10.1109/IECON.1991.239273","DOIUrl":"https://doi.org/10.1109/IECON.1991.239273","url":null,"abstract":"Using the Lyapunov stability theorem, an optimal design procedure for a disturbance observer based sliding mode CP (continuous pass) control is proposed. The result is applied to the two axis SCARA robot trajectory control. Through simulations and experiments, it was verified that the proposed approach is an effective design chart of observer based sliding mode control. Very robust sliding mode control was realized with less chattering.<<ETX>>","PeriodicalId":399007,"journal":{"name":"Proceedings IECON '91: 1991 International Conference on Industrial Electronics, Control and Instrumentation","volume":"505 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133336836","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Remarks on an adaptive type self-tuning controller using neural networks","authors":"T. Yamada, T. Yabuta, K. Takahashi","doi":"10.1109/IECON.1991.239065","DOIUrl":"https://doi.org/10.1109/IECON.1991.239065","url":null,"abstract":"The authors propose an adaptive type of self-tuning controller which offers the possibility of enhanced robustness. This controller does not use a desired feedback gain predetermined by conventional control theories as a teaching signal. Simulated results using a second-order plant show the nonlinear neural network effect for the nonlinear plant. They also show that a controller using a linear neural network is better than one using a nonlinear neural network in the region of small nonlinear and parasite terms. Experimental results using a force confirmed that the controller is useful for an actual system.<<ETX>>","PeriodicalId":399007,"journal":{"name":"Proceedings IECON '91: 1991 International Conference on Industrial Electronics, Control and Instrumentation","volume":"155 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133792270","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}