{"title":"Local Symmetry Based Hint Extraction of B-Rep Model for Machining Feature Recognition","authors":"Zhi Li, Jie Lin, Danchen Zhou, Bo Zhang, H. Li","doi":"10.1115/DETC2018-85509","DOIUrl":"https://doi.org/10.1115/DETC2018-85509","url":null,"abstract":"Machining feature recognition is a key technology in design for manufacturing, inter-operation of neutral format solid models, and reuse of design models in down-streaming applications. Although many approaches have been proposed, the detection and processing of intersection features are still challenging. In this paper, we studied the local property of B-rep model and usage in intersection feature detection. To support hint based reasoning and processing, we proposed a symmetry property definition with relation to edges of solid models. This symmetry property is based on conventional edge convexity, which is an extension of the feature hint theory. The Transformation of global or partial graph matching to local property matching would reduce the complexity in feature matching stages. We implemented a prototype module to evaluate the feasibility of the proposed approach.","PeriodicalId":396837,"journal":{"name":"Volume 4: 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- and Nanosystems","volume":"46 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-08-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125411815","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Improved Benchmarking Method Using Kinematics Analysis in Design of an Upper Limb Exoskeleton Rehabilitation Device","authors":"Yanlin Shi, Q. Peng","doi":"10.1115/DETC2018-85465","DOIUrl":"https://doi.org/10.1115/DETC2018-85465","url":null,"abstract":"Conceptual design plays an important role in product development to meet requirements of the product function, cost and other factors. Existing methods of the product conceptual design rely on experience of designers or benchmarking methods to estimate design parameters, which limits the design automation and optimization. This paper improves the benchmarking methods by integrating the kinematics analysis with quality function deployment in design of an upper limb exoskeleton rehabilitation device. Parameters such as velocity, acceleration and displacement of the product are included for rating benchmarking products to evaluate the rehabilitation device based on customer needs. By integrating the benchmarking method and kinematics analysis, products with the best performance can be determined accurately to help designers to improve the existing product or develop a new product. The proposed method is verified in the design of an upper limb rehabilitation device.","PeriodicalId":396837,"journal":{"name":"Volume 4: 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- and Nanosystems","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-08-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115217499","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Complex Logic Operations Based on MEMS Resonators","authors":"N. Alcheikh, S. A. Tella, M. Younis","doi":"10.1115/DETC2018-85743","DOIUrl":"https://doi.org/10.1115/DETC2018-85743","url":null,"abstract":"Complex logic functions based on micro electromechanical resonators has recently attracted significant attention. Realization of complex logic functions through cascading micro resonators has been deterred by challenges involved in their interconnections and the large required array of resonators. This paper presents a micro electromechanical system MEMS resonator with multiple input (actuation) and output (detection) that enables the realization of complex logic operations. The devices are based on a compound resonator consisting of an in-plane clamped-guided arch beam that is mechanically coupled from its guided side to two flexure beams and to another T-shaped resonant beam. As examples, we experimentally demonstrate using the device to realize a half adder and a 1:2 DEMUX, based on electrothermal and electrostatic tuning of the arch beam and side resonant beam. The logic operation is based on the linear frequency modulation. This paper demonstrates that with such compound MEMS resonators, it is possible to build more complex logic functionalities.","PeriodicalId":396837,"journal":{"name":"Volume 4: 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- and Nanosystems","volume":"74 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-08-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129551462","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Shenggang Guo, Zhiling Yuan, Fenghe Wu, Li Yongxin, Shaoshuai Wang, S. Qin, Q. Peng
{"title":"TRIZ Application in Bionic Modeling for Lightweight Design of Machine Tool Column","authors":"Shenggang Guo, Zhiling Yuan, Fenghe Wu, Li Yongxin, Shaoshuai Wang, S. Qin, Q. Peng","doi":"10.1115/DETC2018-85516","DOIUrl":"https://doi.org/10.1115/DETC2018-85516","url":null,"abstract":"The selection of biomimetic prototypes mostly depends on the subjective observation of a designer. This research uses TRIZ to explore some inferential steps in bionic design of the heavy machine tool column. Conflict resolution theory of TRIZ is applied to describe improved and deteriorated parameters and a contradiction matrix is used to obtain recommended inventive principles. A reference table of solutions corresponding to the biological phenomenon and TRIZ solutions is formed to expedite retrieving the biomimetic object. Based on the table, herbaceous hollow stem is selected to imitate column structure. Four kinds of plant are chosen from the biological database. To select the best from four candidates, a bionic ideality evaluation index is proposed based on similarity analysis and ideality evaluation theory in TRIZ. Thus, the bionic effect can be described and compared quantitatively. Bionic configuration is then evolved concerning manufacturing requirements. Size optimization of stiffener thicknesses is implemented finally, and satisfactory results of the lightweight effect is obtained.","PeriodicalId":396837,"journal":{"name":"Volume 4: 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- and Nanosystems","volume":"2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-08-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124612359","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Design for Additive Manufacturing Inspired by TRIZ","authors":"J. Gross, Kijung Park, G. Kremer","doi":"10.1115/DETC2018-85761","DOIUrl":"https://doi.org/10.1115/DETC2018-85761","url":null,"abstract":"With the rise in popularity of additive manufacturing (AM), relevant design methodologies have become necessary for designers to reap the full benefits from this technology. TRIZ is a problem-solving tool developed to assist with innovative and creative solutions. This paper aims to create a new TRIZ matrix specifically developed for designers using additive manufacturing. The TRIZ matrix offers designers general innovative design solutions to improve specific features of a design while not sacrificing the effectiveness of other features. The proposed matrix can help effective design decision making for additive manufacturing in an early design process as well as a redesign process. Also, a design for additive manufacturing (DfAM) worksheet is provided to enable users to easily find specific design solutions for certain additive manufacturing techniques based on the general solutions derived by the TRIZ matrix. To illustrate the potential of this AM specific TRIZ matrix, case studies are presented.","PeriodicalId":396837,"journal":{"name":"Volume 4: 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- and Nanosystems","volume":"31 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-08-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126967779","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Kai-Ming Hu, B. Peng, Han Yan, Wenming Zhang, Zhong‐Ying Xue, Z. Di, Yazheng Sun
{"title":"Tension-Induced Raman Spectrum Enhanced Phenomena of Graphene Membrane","authors":"Kai-Ming Hu, B. Peng, Han Yan, Wenming Zhang, Zhong‐Ying Xue, Z. Di, Yazheng Sun","doi":"10.1115/DETC2018-85158","DOIUrl":"https://doi.org/10.1115/DETC2018-85158","url":null,"abstract":"In the Letter, we reported the tension-induced Raman spectrum enhanced phenomena of graphene membrane. The standard micro-fabrication processes are utilized to fabricate micro-scale holes on Silicon-On-Insulator (SOI) wafers, and suspended graphene membranes are transferred onto target substrates with shallow holes and flat substrates using the dry and wet transfer techniques, respectively. The corrugated graphene near the hole is stretched smoothly due to the built-in strain during the transfer processes, and the intensity ratio between the 2D and G bands I2D/IG>5, which demonstrates the high quality of graphene sheet is obtained under the stretching stress. The intensity ratio between the 2D and G bands would diminish greatly when the graphene membrane is broken. Therefore, the Raman spectrum intensities of graphene membranes can be tuned by the built-in strain. The study can be helpful for further understanding the formation mechanism of corrugated graphene, the suppressing method of the small ripple in graphene, and the way to improve the quality of graphene.","PeriodicalId":396837,"journal":{"name":"Volume 4: 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- and Nanosystems","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-08-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128080476","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Design and Modeling of a Prosthetic Venous Valve","authors":"R. Packer, B. Jensen, A. Bowden","doi":"10.1115/DETC2018-86164","DOIUrl":"https://doi.org/10.1115/DETC2018-86164","url":null,"abstract":"Chronic Venous Insufficiency (CVI) is a disease of the lower limbs that affects millions of people in the United States. CVI results from incompetent venous valves. The purpose of venous valves is to prevent retrograde blood flow to the lower limbs. Valve failure can lead to edema, pain, and ulcers. One solution that has great potential is to create an implantable venous valve that could restore function of the venous system. No prosthetic venous valves are clinically used currently because of problems with biocompatiblility and thrombogenicity caused by high shear rates. This paper presents a prosthetic venous valve that could overcome these difficulties by using carbon-infiltrated carbon nanotubes (CI-CNTs). This material has been proven to be thrombo-resistant, biocompatible due to its non-reactive properties, and durable. The valve was designed to be initially open and to close with physiological pressures. Finite element modeling showed that, with a hydrostatic pressure of 20 mmHg (the minimum hydrostatic pressure in the common femoral vein), it fully closed with a maximum stress of 117 MPa, which is below the ultimate strength of CI-CNTs. A computational fluid dynamics analysis demonstrated the valve would cause a maximum shear rate of 225.1 s−1, which is less than the maximum shear rate in the body. Hence, this valve would be less likely than previous prosthetic valves to develop blood clots. Currently, this is the lowest shear rate reported for a prosthetic venous valve. These results demonstrate that a CI-CNT prosthetic venous valve has the potential to be an effective treatment for CVI.","PeriodicalId":396837,"journal":{"name":"Volume 4: 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- and Nanosystems","volume":"100 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-08-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117329029","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Challenges in Sustainable Manufacturing With Industrial and Collaborative Robots: A Case Study","authors":"Romain Farel, Selma Kchir, X. Lamy, M. Grossard","doi":"10.1115/DETC2018-85860","DOIUrl":"https://doi.org/10.1115/DETC2018-85860","url":null,"abstract":"Automation of manufacturing process with robots is an industrial challenge, generally evaluated by the Return On Investment (ROI) that such a transformation could generate. However, the automation has a considerable cost particularly for SMEs, which makes a barrier to access and limits the motivation of facilitating the manual work of the operators, despite of nonergonomic and risky situations. In this study, supported by the European project HORSE, we went through the development of a robotic solution to assist the operator in the manufacturing. This component called programming-by-demonstration is integrated in both main categories of automation: industrial robot and collaborative robot (cobot). Both applications are tested and evaluated in a real manufacturing task (cutting cast pieces from foundry) and evaluated by the industrial end-user. The paper states on the application of the developed component, and concludes with the lesson learned.","PeriodicalId":396837,"journal":{"name":"Volume 4: 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- and Nanosystems","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-08-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131321554","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Research on Curved Layer Fused Deposition Modeling (CLFDM) With Variable Extruded Filament (VEF)","authors":"Donghua Zhao, Weizhong Guo","doi":"10.1115/DETC2018-85343","DOIUrl":"https://doi.org/10.1115/DETC2018-85343","url":null,"abstract":"Fused Deposition Modeling (FDM), an Additive Manufacturing (AM) technique, is widely used due to its low-cost and open source. Geometry accuracy and strength performance of the printed parts are closely related to inter-layer bonding between adjacent layers and inter-road bonding in the layer. Because of the limit of layer-based AM, the longitudinal tensile strength of the filaments is much higher than the bonding strength between adjacent filaments, which brings anisotropy of the printed part. While CLFDM is devoted to solve this problem and obtain better geometry accuracy and meanwhile decrease build time by virtue of high continuity of filament, reduced stair-step effect, and lesser number of layers, especially when manufacturing thin and curved parts (shells). However, to the best of our knowledge in the aspects of process modeling of CLFDM, available researches focus mainly on simple curved layer, instead of more intricate ones possessing tiny features, which are more common in manufacturing. Therefore, to realize Solid Freeform Fabrication (SFF), this paper researches CLFDM with VEF (simultaneously changing the direction and the dimension of extruded filament according to manufacturing demand of the curved layer), which would be a fundamental study and a foundation for Advanced Design for Additive Manufacturing (ADFAM), slicing and path planning (extruder path generation) in 3D space. To realize slicing and printing with homogeneous and inhomogeneous extruded filament between consecutive layers and within the layer (flat or curved), models of flat layer FDM and CLFDM with VEF are respectively established. Then, the relationships among key process parameters are analyzed. Finally, graphical simulation of the proposed strategy based on a vase is provided to verify its effectiveness and advantages from a theoretical point of view. In general, variable direction of extruded filament along tangential directions of part surface imparts smoother surfaces, instead of rough exterior appearance resulting from stair-step effects. And variable dimension of extruded filament maximizes material extruded to increase build speed wherever allowed and minimizes deposition size for resolution whenever needed, resulting in curved layer surfaces with uneven layer thickness and having tiny features.","PeriodicalId":396837,"journal":{"name":"Volume 4: 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- and Nanosystems","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-08-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126647394","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Development of a Three-Dimensional Printer for Water-Soluble Biomaterial Printing","authors":"Chihhao Su, Gou-Jen Wang","doi":"10.1115/DETC2018-85057","DOIUrl":"https://doi.org/10.1115/DETC2018-85057","url":null,"abstract":"In this study, a three-dimensional bioscaffold printer was developed to fabricate biocompatible scaffolds from water-soluble materials for application in cell studies. A gelatin/sodium alginate solution was used to produce the scaffolds via a fused deposition modelling (FDM) printing method using the modified 3D printer. Modifications and improvements to the material feeding system, printing head, and printing platform were made, with additional optimization of the printing parameters, such as the feed rate, printing rate, and printing head size to investigate the precision and accuracy of two-dimensional and 3D bioscaffold printing. In addition to modifications of the feeding system from the original solid to the new liquid state material, a heating probe and coil were added to maintain the liquid phase. The printing nozzle was also altered to allow for the feed material and a cross-linking agent to mix prior to printing; enabling cross-linked scaffolds to be produced. Furthermore, the printing surface was integrated with a filter to allow for excess fluid to drain from the scaffold after printing and cross-linking. The results of this study revealed that the optimal printing parameters for producing a 2D 15.3 mm × 15.3 mm square was with a printing head-platform distance of 4 mm, material feed rate of 5 mL/min, printing rate of 35 mm/s and a printing head diameter of 0.4 mm. In addition, it was found that the printing speed and the printed image size and resolution are correlated, as such, the smallest dimensions able to be printed is 10.3 mm × 10.3 mm, with a line width of 1 mm. In regards to 3D scaffolds, the printed scaffolds had dimensions of 20 mm × 20.15 mm with a height of 7.5 mm; which were found to support the growth of mouse fibroblast cells.","PeriodicalId":396837,"journal":{"name":"Volume 4: 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- and Nanosystems","volume":"76 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-08-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128139168","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}