{"title":"Design Methods for Large Scale Printing","authors":"Manuel J. Garcia","doi":"10.52842/conf.ecaade.2015.2.331","DOIUrl":"https://doi.org/10.52842/conf.ecaade.2015.2.331","url":null,"abstract":"With an exponential increase in the possibilities of computation and computer-controlled fabrication, high density information is becoming a reality in digital design and architecture. However, construction methods and industrial fabrication processes have not yet been reshaped to accommodate the recent changes in those disciplines. Although it is possible to build up complex simulations with millions of particles, the simulation is often disconnected from the actual fabrication process. Our research proposes a bridge between both stages, where one drives the other, producing a smooth transition from design to production. A particle in the digital domain becomes a drop of material in the construction method.The architect's medium of expression has become much more than a representational tool in the last century, and more recently it has evolved even beyond a series of rules to drive from design to production. The design system is the instruction itself; embedding structure, material and tectonics and gets delivered to the very end of the construction chain, where it gets materialised. The research showcased in this paper investigates tectonic systems associated with large scale 3D printing and additive manufacturing methods, inheriting both material properties and fabrication constraints at all stages from design to production. Computational models and custom design software packages are designed and developed as strategies to organise material in space in response to specific structural and logistical input.Although the research has developed a wide spectrum of 3D printing methods, this paper focuses only on two of the most recent projects, where different material and computational logics were investigated. The first, titled Filamentrics, intends to develop free-form space frames, overcoming their homogeneity by introducing robotic plastic extrusion. Through the use of custom made extruders a vast range of high resolution prototypes were developed, evolving the design process towards the fabrication of precise structures that can be materialised using additive manufacturing but without the use of a layered 3D printing method. Instead, material limitations were studied and embedded in custom algorithms that allow depositing material in the air for internal connectivity. The final result is a 3x2x2.5m structure that demonstrates the viability of this construction method for being implemented in more industrial scenarios.While Filamentrics is reshaping the way we could design and build light weight structures, the second project Microstrata aims to establish new construction methods for compression based materials. A layering 3D printing method combines both the deposition of the binder and the distribution of an interconnected network of capillaries. These capillaries are organised following structural principles, configuring a series of channels which are left empty within the mass. In a second stage aluminium is cast in this hollow space to bu","PeriodicalId":376772,"journal":{"name":"Proceedings of the 33th International Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe) [Volume 2]","volume":"3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122742129","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"An Artificial Life Approach to Configuring Architectural Space","authors":"T. Ireland","doi":"10.52842/conf.ecaade.2015.2.581","DOIUrl":"https://doi.org/10.52842/conf.ecaade.2015.2.581","url":null,"abstract":"This paper presents a method of configuring architectural space that articulates the coupling of an organism with its environment; expressing the spatiality of unfolding engagement in the world. The premise is that space is a consequence of cohesion, effected through constraints and processes of enaction. An Artificial Life model is presented as an analogue of a bottom-up approach to architectural design that takes into account that we as organisms interact with our ever present changing environment and redefine our spatial domain depending on our sensory interaction with said environment.","PeriodicalId":376772,"journal":{"name":"Proceedings of the 33th International Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe) [Volume 2]","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-09-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116947358","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A Parametric Process for Shelters and Refugees’ Camps Design","authors":"E. Daher, S. Kubicki, G. Halin","doi":"10.52842/conf.ecaade.2015.2.541","DOIUrl":"https://doi.org/10.52842/conf.ecaade.2015.2.541","url":null,"abstract":"Many situations related to natural environment and human activities increase the risk related to housing and create a demand for rapid post-disaster solutions. The solutions implemented by both the non-governmental organizations (NGOs) and the local and national organizations should fulfill the requirements of the temporarily displaced populations. However post-disaster design faces many challenges in its process making the response always more complex. At the same time, computer-based design is a growing approach in both architectural practice and research. The research described in this paper aims to help in finding solutions to design issues by addressing the potential of computer-based architectural design support. It is applied to shelter and camp development and takes into account physical, contextual and climatic parameters. The outcome is a design process for shelter and camp, which has been validated by a parametric prototype experiment in a case study. This should support humanitarian teams and contribute to enhancing the quality of design as well as to reducing the time required for the design and construction processes.","PeriodicalId":376772,"journal":{"name":"Proceedings of the 33th International Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe) [Volume 2]","volume":"2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-09-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117332389","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Informed Design to Robotic Production Systems - Developing Robotic 3D Printing System for Informed Material Deposition","authors":"S. Mostafavi, H. Bier, Serban Bodea, A. M. Antón","doi":"10.52842/conf.ecaade.2015.2.287","DOIUrl":"https://doi.org/10.52842/conf.ecaade.2015.2.287","url":null,"abstract":"This paper discusses the development of an informed Design-to-Robotic-Production (D2RP) system for additive manufacturing to achieve performative porosity in architecture at various scales. An extended series of experiments on materiality, fabrication and robotics were designed and carried out resulting in the production of a one-to-one scale prototype. In this context, design materiality has been approached from both digital and physical perspectives. At digital materiality level, a customized computational design framework is implemented for form finding of compression only structures combined with a material distribution optimization method. Moreover, the chained connection between parametric design model and robotic production setup has led to a systematic study of certain aspects of physicality that cannot be fully simulated in the digital medium, which then establish a feedback loop for underrating material behaviors and properties. As a result, the D2RP system proposes an alternative method of robotic material deposition to create an informed material architecture","PeriodicalId":376772,"journal":{"name":"Proceedings of the 33th International Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe) [Volume 2]","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-09-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117031672","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Gradient Transparency: Marine Animals As a Source of Inspiration. - Exploring Material Bio-Mimicry through the Latest 3D Printing Technology in Architectural surfaces","authors":"Simos Vamvakidis","doi":"10.52842/conf.ecaade.2015.2.325","DOIUrl":"https://doi.org/10.52842/conf.ecaade.2015.2.325","url":null,"abstract":"Digital fabrication technologies are changing rapidly the way we design, as any other tool would affect the way we produce space. Multi layered 3D printing is already allowing architects, designers and engineers to experiment with new design processes and new ways of production. At the same time, little research has being done in the way gradient transparency (through multiple layered surfaces) can affect the design process through computation; a field that deserves further investigation. The focus of this paper is to explore bio-inspired material finding design processes while combining biology, architecture and material science. We explore performance driven design possibilities through a study of marine animals -and specifically cephalopods- where opacity between skin layers is controlled through color pigments - while black pigments are called melanophores - which is often used as a type of camouflage. We propose a computation model that follows the logic of gradient transparency through pigments to fit complex “host surfaces”. We define a “host” surface as a basic geometry on which the pigments are computed. This study provides the methodology for the design of biomimetic surfaces with gradient transparency, using controlled and computated sub geometries analogous to the melanophores pigments. We finally propose Pigment Skin, a computational design model as an example to materialize this study.","PeriodicalId":376772,"journal":{"name":"Proceedings of the 33th International Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe) [Volume 2]","volume":"24 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133587670","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Digital Tools and Creative Practice in Architectural Research","authors":"J. Verbeke, Tadeja Zupanzic, H. Achten","doi":"10.52842/conf.ecaade.2015.2.025","DOIUrl":"https://doi.org/10.52842/conf.ecaade.2015.2.025","url":null,"abstract":"Recent developments in architectural research show a growing focus on research by design and creative practice research. New working modes are being established (in practice as well as in academia) which are a hybrid of traditional research practices in architecture and explorations in practice. In this paper we outline the characteristics, potentials, and possible future implementation of Research by Design and ask some fundamental questions about the implications for the field of CAAD.","PeriodicalId":376772,"journal":{"name":"Proceedings of the 33th International Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe) [Volume 2]","volume":"78 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126314382","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"The Use of Digital Fabrication as a Sketching Tool in the Architectural Design Process - A Case Study","authors":"Asli Agirbas","doi":"10.52842/conf.ecaade.2015.2.319","DOIUrl":"https://doi.org/10.52842/conf.ecaade.2015.2.319","url":null,"abstract":"Computer-aided manufacturing (CAM) technologies including computer numerically controlled (CNC) milling, laser cutting and 3D printing are becoming cheaper and globally more accessible. Accordingly, many design professionals, academics and students have been able to experience the benefits and challenges of using digital fabrication in their designs. The use of digital fabrication in the education of architecture students has become normal in many schools of architecture, and there is a growing demand for computer-aided manufacturing (CAM) logic and fabrication knowledge in student learning. Clearly, architecture students are acquiring material base-thinking, time management, production methods and various software skills through this digital fabrication. However, it appears to be the case that architecture students use digital fabrication mainly in the final stage of their design or in their finishing work. In this study, computer-aided manufacturing (CAM) technologies have been used as a sketch tool rather than simply for fabricating a final product in the architectural design process and the advantages of this educational practice are demonstrated.","PeriodicalId":376772,"journal":{"name":"Proceedings of the 33th International Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe) [Volume 2]","volume":"17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115651673","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Osteotectonics - Trabecular Bone Structures and Their Adaptation for Customized Structural Nodes Using Additive Manufacturing Techniques","authors":"Daniel Baerlecken","doi":"10.52842/conf.ecaade.2015.2.439","DOIUrl":"https://doi.org/10.52842/conf.ecaade.2015.2.439","url":null,"abstract":"This paper discusses an approach to adapting trabecular bone structures for the design of complex architectural components exemplified through structural nodes. Based on the paradigm shift in additive fabrication, namely the ability to print structural metals, this paper identifies new methods for architectural and structural design that allow to create porous, intricate architectural components. Those components are designed in analogy to bone structures. The paper presents a metaball-based application, programmed in Processing, which allows creating n-legged nodes using parametric gradient maps. The approach aims at reduction of weight and waste, while exploring the novel aesthetic properties of such bio-constructed networks.","PeriodicalId":376772,"journal":{"name":"Proceedings of the 33th International Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe) [Volume 2]","volume":"20 9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128393755","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Performative Design and Fabrication of a Parametric Wall Screen for Tropical Climates - A Modular Approach","authors":"T. Wortmann","doi":"10.52842/conf.ecaade.2015.2.521","DOIUrl":"https://doi.org/10.52842/conf.ecaade.2015.2.521","url":null,"abstract":"We have developed a modular approach to the parametric design of a patterned facade for tropical climates, using a “lighter” data set and model that integrates a number of performance considerations. This modular approach separates the facade's design into form, facade pattern, facade density requirements, and facade components, and reintegrates these aspects via a triangular mesh, represented as a fast and convenient data structure based on half-edges. Through this separation, the design team can simultaneously work on the architectural appearance of the design, its performance, and its fabrication, while retaining holistic control through the constant reintegration of design changes via the half-edge data structure. In this way, we retain the advantages of a parametrically driven design process, such as automatic design generation and the integration of performance aspects, while permitting more flexible and non-sequential design explorations by different members of the design team.","PeriodicalId":376772,"journal":{"name":"Proceedings of the 33th International Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe) [Volume 2]","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129357859","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Parametrized Systems: Conceiving of Buildings as Assemblies of Varied Parts","authors":"H. Matcha","doi":"10.52842/conf.ecaade.2015.2.143","DOIUrl":"https://doi.org/10.52842/conf.ecaade.2015.2.143","url":null,"abstract":"We describe and discuss a design and research project that together with students explores the new possibilities current design tools and manufacturing processes give architects to design systems for building components that transcend the limits of fordist serial mass production in favour of post-fordist individualized mass production, most importantly the supersession of a few equal building components for many similar ones. Contrary to many projects with similar content and intent, ours starts not with the digital tools but with production techniques and materials. Constant physical materialization plays the main role, digital tools assist.","PeriodicalId":376772,"journal":{"name":"Proceedings of the 33th International Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe) [Volume 2]","volume":"34 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114854117","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}