{"title":"The RF receiver front-end chip design with the transformer balun for DSRC applications","authors":"Jhin-Fang Huang, Yong-Jhen Jiangn, Ron-Yi Liu","doi":"10.1109/VDAT.2011.5783609","DOIUrl":"https://doi.org/10.1109/VDAT.2011.5783609","url":null,"abstract":"A 0.18 µm CMOS RF receiver front-end applying in DSRC systems is presented in this paper. The proposed receiver front-end includes the current-reused LNA, the folded Giber cell mixer, and the Colpitts VCO. Also, this paper presents the design methodology and application of the transformer balun for RFIC. The measured results of the proposed receiver front-end show the input return loss of 30.5 dB, the conversion gain of 17.5 dB, the (DSB) NF of 4.2 dB, and the third-order intercept point (IIP3) of −10 dBm at 5.8 GHz frequency. The chip area of the proposed receiver front-end including pads is 1.4 × 1.4 mm with the total power dissipation of 49.78 mW.","PeriodicalId":368625,"journal":{"name":"Proceedings of 2011 International Symposium on VLSI Design, Automation and Test","volume":"40 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114660982","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"An image lag free CMOS image sensor with Constant-Residue Reset","authors":"Shang-Fu Yeh, C. Hsieh, Chin-Fong Chiu, H. Tsai","doi":"10.1109/VDAT.2011.5783628","DOIUrl":"https://doi.org/10.1109/VDAT.2011.5783628","url":null,"abstract":"A lag-free CMOS image sensor (CIS) with Constant-Residue Reset (CRR) operation is presented in this paper. It effectively eliminates image lag effect caused by the channel doping profile variation of transfer transistor and non-optimized pixel layout in the 4T-pixel. A prototype 160×120 CMOS imager has been designed and fabricated in 0.18um 1P4M CIS process. The experimental results demonstrated that the image lag effect is fully eliminated by CRR operation.","PeriodicalId":368625,"journal":{"name":"Proceedings of 2011 International Symposium on VLSI Design, Automation and Test","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120950678","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Wei-Cheng Lien, Tong-Yu Hsieh, Cheng-Tsung Tsai, Kuen-Jong Lee
{"title":"A rotation-based BIST with self-feedback logic to achieve complete fault coverage","authors":"Wei-Cheng Lien, Tong-Yu Hsieh, Cheng-Tsung Tsai, Kuen-Jong Lee","doi":"10.1109/VDAT.2011.5783623","DOIUrl":"https://doi.org/10.1109/VDAT.2011.5783623","url":null,"abstract":"This paper presents a deterministic BIST technique that can efficiently achieve complete fault coverage without using any storage devices. A novel test structure containing a self-feedback logic unit and a circular shift register is proposed by which all the required deterministic patterns can be generated on-chip in real time. Experiments on ISCAS 85 benchmark circuits show that compared with previous work addressing the same problem our technique requires much less test time to achieve 100% fault coverage for all testable stuck-at faults.","PeriodicalId":368625,"journal":{"name":"Proceedings of 2011 International Symposium on VLSI Design, Automation and Test","volume":"14 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125347061","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Asymmetrical ground gating for low leakage and data robust sleep mode in memory banks","authors":"Hailong Jiao, V. Kursun","doi":"10.1109/VDAT.2011.5783611","DOIUrl":"https://doi.org/10.1109/VDAT.2011.5783611","url":null,"abstract":"A new asymmetrical ground gated 7T SRAM circuit technique is presented in this paper to lower leakage currents and enhance noise immunity in idle memory banks. A novel write assist scheme is proposed to enhance write margin with the new memory circuit. The leakage power consumption is suppressed by up to 4.30x and the data stability is enhanced by up to 4.79x as compared with the previously published ground gated SRAM circuits in a UMC 80nm CMOS technology. Furthermore, the write margin is increased by up to 59.94% with the new asymmetrical memory circuit as compared to a previously published asymmetrical SRAM ground gating technique.","PeriodicalId":368625,"journal":{"name":"Proceedings of 2011 International Symposium on VLSI Design, Automation and Test","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126638273","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
I-Yao Chuang, T. Fan, Chi-Hung Lin, Chun-Nan Liu, J. Yeh
{"title":"HW/SW co-design for multi-core system on ESL virtual platform","authors":"I-Yao Chuang, T. Fan, Chi-Hung Lin, Chun-Nan Liu, J. Yeh","doi":"10.1109/VDAT.2011.5783598","DOIUrl":"https://doi.org/10.1109/VDAT.2011.5783598","url":null,"abstract":"Multi-core system and the associated software parallelization techniques have become one of the major trends of SoC design. A multi-core system with high hardware efficiency and software parallelism has the potential of achieving higher system performance and lower power consumption. This paper reveals how system performance prediction and analysis for multi-core system can be done at early design stage before having implemented the real chip by adopting ESL design methods and virtual platform techniques that has high timing accuracy and simulation speed. Based on the multi-core ESL virtual platform, we have performed one to eight DSP-cores system performance analysis and obtained the performance trend observation. Moreover, the software parallelization experiments to observe the performance improvement are explored.","PeriodicalId":368625,"journal":{"name":"Proceedings of 2011 International Symposium on VLSI Design, Automation and Test","volume":"23 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121896940","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Yan Zhang, Sijie Chen, N. Kiyani, G. Dolmans, J. Huisken, B. Busze, P. Harpe, Nick van der Meijs, H. de Groot
{"title":"A 3.72μW ultra-low power digital baseband for wake-up radios","authors":"Yan Zhang, Sijie Chen, N. Kiyani, G. Dolmans, J. Huisken, B. Busze, P. Harpe, Nick van der Meijs, H. de Groot","doi":"10.1109/VDAT.2011.5783586","DOIUrl":"https://doi.org/10.1109/VDAT.2011.5783586","url":null,"abstract":"In order to minimize power consumption without sacrificing much latency performance, wake-up radios are employed to assist the main radio for low power channel monitoring. This paper presents the design and implementation of an ultra-low power digital baseband (DBB) circuit for a wake-up radio. In a 90nm CMOS process, the circuit running at a 800kHz clock consumes 3.72μW with a standard 1.2V supply voltage, and achieves very good packet detection performance. The circuit is fully functional at 0.6V supply consuming 0.9μW.","PeriodicalId":368625,"journal":{"name":"Proceedings of 2011 International Symposium on VLSI Design, Automation and Test","volume":"82 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126277700","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Chia-Wei Chang, S. Jang, Chong-Wei Huang, Chih-Chieh Shih
{"title":"Dual-resonance LC-tank frequency divider implemented with switched varactor bias","authors":"Chia-Wei Chang, S. Jang, Chong-Wei Huang, Chih-Chieh Shih","doi":"10.1109/VDAT.2011.5783545","DOIUrl":"https://doi.org/10.1109/VDAT.2011.5783545","url":null,"abstract":"A triple-band CMOS LC-tank injection locked frequency divider (ILFD) is proposed and implemented in a 90nm CMOS process. It is realized with a cross-coupled nMOS oscillator with a double-tuned transformer resonator. At the dc drain-source voltage of 0.65 V, the free-running ILFD can have two frequency bands while switching one varactor bias, and the tuning range is from 4.23 (8.89) GHz to 4.47 (10.39) GHz for the low- (high-) frequency band. The measured operational locking range is from 7.6 (15.3) GHz to 10 (19.9) GHz for the low- (high-) frequency band. The double-resonance ILFD has one excited locking frequency band while biasing at the high-frequency band, the excited operational locking range is from 5.75 GHz to 6.3 GHz.","PeriodicalId":368625,"journal":{"name":"Proceedings of 2011 International Symposium on VLSI Design, Automation and Test","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130137237","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A baseband receiver for optical OFDM systems","authors":"Chen-Hung Peng, Kai-Ting Shr, Ming-Hung Lin, Yuan-Hao Huang","doi":"10.1109/VDAT.2011.5783584","DOIUrl":"https://doi.org/10.1109/VDAT.2011.5783584","url":null,"abstract":"Orthogonal frequency division multiplexing (OFDM) technique has been widely adopted in wireless communication systems. However, the study of OFDM technique for optical transmission system is still emerging in the research field. In this paper, we propose a baseband receiver architecture for the optical OFDM system. The baseband receiver contains frame detection, carrier frequency offset (CFO) estimation and compensation, channel estimation, and equalization. This paper also proposes a fast Fourier transform (FFT) processor with highly parallel architecture for the high-throughput requirement in the optical system. Finally, the FFT processor is designed and implemented using 90nm UMC CMOS technology. The measurement result shows that this chip achieves 2.67GS/s throughput for the optical OFDM system.","PeriodicalId":368625,"journal":{"name":"Proceedings of 2011 International Symposium on VLSI Design, Automation and Test","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117325033","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
P. Harpe, Xiongchuan Huang, Xiaoyang Wang, G. Dolmans, H. de Groot
{"title":"A 0.37μW 4bit 1MS/s SAR ADC for ultra-low energy radios","authors":"P. Harpe, Xiongchuan Huang, Xiaoyang Wang, G. Dolmans, H. de Groot","doi":"10.1109/VDAT.2011.5783588","DOIUrl":"https://doi.org/10.1109/VDAT.2011.5783588","url":null,"abstract":"This paper presents a 4bit SAR ADC for ultra-low energy radios. It is not obvious to maintain good power-efficiency for low resolution, low data rate ADCs given fixed overhead and scaling limitations. Nevertheless, an excellent FOM of 25fJ/conversion-step is achieved by using a dedicated capacitor implementation, asynchronous dynamic logic, an optimized layout and a reduced power supply. The prototype in a 90nm CMOS technology achieves an ENOB of 3.9bit while operating at 1.024MS/s. The power consumption is only 0.37μW from a 0.7V supply, which is an absolute minimum for 1MS/s ADCs.","PeriodicalId":368625,"journal":{"name":"Proceedings of 2011 International Symposium on VLSI Design, Automation and Test","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132891734","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Integration technology of heterogenous components for microsytems","authors":"T. Ono","doi":"10.1109/VDAT.2011.5783616","DOIUrl":"https://doi.org/10.1109/VDAT.2011.5783616","url":null,"abstract":"Microelectromechanical system (MEMS) technologies have produced various high-value-added products and devices on the basis of heteroginous integration technology including LSI integration. On the other hand, recent LSI has been miniaturized according to scaling law. LSI has been fabricated by standardized process, and its production requires huge facilities. On the other hand, the principle, structure and size of MEMSs are different, and the standardization of the process is difficult. In MEMSs, various kinds of materials including nanomaterials are used in comparison with LSI, also specific fabrication technologies different from that of LSI are used. Consequently, monolithic fabrication of MEMS and LSI, i.e. integration of both MEMS and LSI on a substrate, become difficult. The fabrication of recent LSI needs huge costs, and the researches on integration of MEMS and LSI (LSI-MEMS) becomes difficult. Successful devices are only high-volume production including inertia sensors and pressure sensors, but high volume production is not always needed for MEMSs. Microelectromechanical system (MEMS) technologies have produced various high-value-added products and devices on the basis of heteroginous integration technology including LSI integration. Also this technology can miniaturize sensors or various systems, which opens new applications to ubiquitous sensing and network sensor. At Tohoku University, we started researches of LSI-MEMS based on “Shared wafer” for additive MEMS process to reduce the development cost, which is conducted in program “Innovation center for fusion of advanced technologies”[1]. In this talk, recent progress of the research based on “Shared wafer”, also related researches on integration technologies and devices are presented.","PeriodicalId":368625,"journal":{"name":"Proceedings of 2011 International Symposium on VLSI Design, Automation and Test","volume":"126 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2011-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116031831","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}