Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems最新文献

筛选
英文 中文
Study on Correcting Method for Predicting Brittle Fracture of Surface Cracked Plates in Mixed-Mode Loading 混合模式加载下表面裂纹板脆性断裂预测修正方法研究
Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems Pub Date : 2022-06-05 DOI: 10.1115/omae2022-78305
Takuya Akahoshi, K. Azuma, T. Iwashita
{"title":"Study on Correcting Method for Predicting Brittle Fracture of Surface Cracked Plates in Mixed-Mode Loading","authors":"Takuya Akahoshi, K. Azuma, T. Iwashita","doi":"10.1115/omae2022-78305","DOIUrl":"https://doi.org/10.1115/omae2022-78305","url":null,"abstract":"\u0000 This study aims to establish a fracture prediction method that considers the effect of crack opening modes to accurately predict brittle fracture occurring at the beam-to-column joints of building structures. Beam-to-diaphragm joint models were tested under cyclic loading, designed to connect building structures. Finite element analysis and failure prediction using the Weibull stress approach were conducted. Using mixed-mode ratio, the effect of crack opening modes on prediction accuracy was examined. Further, the accuracy of fracture prediction were improved through corrections for different modes.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134636307","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
A Trawl Net Model Tailor-Made for Simulation of Pipeline and Trawl Board Pull-Over Interaction 一种专门用于管道与拖网板相互作用仿真的拖网模型
Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems Pub Date : 2022-06-05 DOI: 10.1115/omae2022-79216
Vegard Longva, E. Levold, H. Ilstad
{"title":"A Trawl Net Model Tailor-Made for Simulation of Pipeline and Trawl Board Pull-Over Interaction","authors":"Vegard Longva, E. Levold, H. Ilstad","doi":"10.1115/omae2022-79216","DOIUrl":"https://doi.org/10.1115/omae2022-79216","url":null,"abstract":"\u0000 This paper proposes a new trawl net model tailor-made for simulation of trawl board and pipeline pull-over interaction. The trawl net is connected to the trawl board by a steel rope referred to as the sweepline. It is crucial that the correct tension level is simulated for the sweepline during the trawl board and pipeline interaction phase. In previous work, this was achieved by using a single node with quadratic drag properties for the trawl net. However, it was necessary to apply a time-consuming approach where the drag properties were tuned on a case-to-case basis and also stepwise changes of the drag properties throughout the analysis had to be applied in some cases. These drawbacks were avoided in the present work by developing a new trawl net model consisting of 4 nodes and 4 lines. The number of degrees of freedom (DOFs) is very small which makes the proposed model an attractive alternative compared to detailed net structure models consisting of numerous DOFs. Further, the model is applicable for use in standard commercial software since it employs basic structural elements and a quadratic Morison load model. This paper also presents a numerical study where the developed model is validated against model test results of trawl board and pipeline interaction. The trawl net model was found to predict sweepline tension levels in very good agreement with the model tests performed for velocities of 1.5 m/s and 2.06 m/s. The trawl net model was further applied to study the validity of a flume tank test method that applies a constant sweepline tension during trawl board and pipeline interaction. The study showed that non-conservative pipeline interaction loads resulted for the constant sweepline tension model. It is therefore recommended to include the complete trawl net in flume tank testing of trawl board and pipeline pull-over interaction.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131005067","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Structural Response of Subsea Pipe Elbows Under Monotonic and Cyclic Loading 单调和循环荷载作用下海底管道弯头结构响应
Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems Pub Date : 2022-06-05 DOI: 10.1115/omae2022-79151
G. E. Varelis, Elie Dib, S. Karamanos
{"title":"Structural Response of Subsea Pipe Elbows Under Monotonic and Cyclic Loading","authors":"G. E. Varelis, Elie Dib, S. Karamanos","doi":"10.1115/omae2022-79151","DOIUrl":"https://doi.org/10.1115/omae2022-79151","url":null,"abstract":"\u0000 Pipe bends (elbows) are commonly used components in subsea piping systems. They are quite flexible compared to the corresponding straight pipes and are used to reduce the reaction forces and moments at the supports and the bending moments within the piping system, as well as to accommodate pipeline thermal expansion requirements. Because of their flexibility though, they develop significant deformations, mainly in the form of cross-sectional deformation (ovalization), which are associated with the development of local stresses and strains, significantly larger than those in the corresponding straight pipe, and may cause either buckling or rupture of the elbow pipe wall.\u0000 Several works have been reported on the structural performance and integrity of elbows in piping systems, in power plants or process industries. Under extreme loading conditions, e.g. seismic, or under shutdown/startup conditions, those elbows are subjected to bending under internal pressure, which may cause either plastic collapse or fracture due to low-cycle fatigue. On the other hand, the response of externally pressurised thick-walled elbows used in subsea systems, has received much less attention. The main feature in those elbows is the presence of external pressure, which has a destabilizing effect, especially in deep water applications. Under monotonic load, in the presence of external pressure, elbow ovalization is accentuated leading to pipe collapse at relatively low levels of structural loading. Under cyclic loading, progressive ovalization of the elbow occurs due to accumulation of plastic deformation, which may also result in rapid collapse due to the presence of external pressure.\u0000 The present paper, motivated by the use of steel elbows in subsea systems, describes a finite element simulation of elbow response under static and cyclic loading, in the presence of external pressure. Particular emphasis is given on the constitutive model, which should be capable of simulating the response of steel material under cyclic loading, and primarily, the accumulation of plastic strain over the loading cycles. The numerical results are compared with the design provisions in DNVGL-ST-F101.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"29 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122391752","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Pipeline Reel-Lay FE Simulation: An Advanced Material Model Calibrated From Testing 管道卷-铺有限元模拟:一种先进的材料模型校准从测试
Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems Pub Date : 2022-06-05 DOI: 10.1115/omae2022-79856
Eric Giry, Chen Shen, Richard Stableford
{"title":"Pipeline Reel-Lay FE Simulation: An Advanced Material Model Calibrated From Testing","authors":"Eric Giry, Chen Shen, Richard Stableford","doi":"10.1115/omae2022-79856","DOIUrl":"https://doi.org/10.1115/omae2022-79856","url":null,"abstract":"\u0000 For small to medium size rigid pipelines, reel-laying is an efficient installation method. Higher lay rates are achieved thanks to unreeling rigid pipeline down to seabed. However, the process is mechanically onerous. Pipelines go through successive large bending strains up to 2% or 3%. This is the primary degradation mechanism and affects the mechanical in-service performance of the subsea line. Assessment of material response to the installation sequence is a key point for pipeline engineering. Conventional monotonic material stress-strain relation or cyclic Ramberg-Osgood models are not suitable for repeated large bending sequences or reel-lay installation FE simulations. A parameter-based material model has been tailored for carbon steel seamless pipe under reeling. The evolution of the material behaviour from the first load to stabilised cycle is addressed, by introducing an Abaqus User Subroutine written in FORTRAN. The material properties are programmed in each straining cycle, then active in their corresponding loading cycle. Specimens from DNV450 grades pipe have been tested in an extensive small-scale test and bending trial campaign in order to calibrate finite element model. DIC is used during tensile test and LCF (Low Cycle Fatigue) test to allow accurate measurement on large straining ranges. The parameter-based model can provide response to the first load, including Lüders plateau, up to stabilized hysteresis loop; it is fully parametric by Python. Comparison is made with the more conventional material model or full-scale bending trials demonstrating improved accuracy and agreement with testing. The proposed material model is part of an in-house material model library integrated in a numerical tool package dedicated to rigid pipeline design.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124105248","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Modeling of Thermo-Mechanical Behavior of Laser Powder Bed Fusion of Nickel-Based Super Alloy Parts Used in Oil and Gas Industry 石油天然气工业用镍基高温合金零件激光粉末床熔合的热-力学行为建模
Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems Pub Date : 2022-06-05 DOI: 10.1115/omae2022-79192
Z. Beiranvand, R. Ratnayake, Mehdi Rasoulinia, Amir Moradiani
{"title":"Modeling of Thermo-Mechanical Behavior of Laser Powder Bed Fusion of Nickel-Based Super Alloy Parts Used in Oil and Gas Industry","authors":"Z. Beiranvand, R. Ratnayake, Mehdi Rasoulinia, Amir Moradiani","doi":"10.1115/omae2022-79192","DOIUrl":"https://doi.org/10.1115/omae2022-79192","url":null,"abstract":"\u0000 Nickel-based alloys are used for a broad range of applications in oil and gas (O&G) production and marine engineering because of their good corrosion resistance and mechanical properties. The future of laser AM in the O&G industries is highly promising due to the ability to deliver cheaper and better parts quickly. As it is in the initial stages, rigorous research needs to be done to enhance the fabrication speed and parametric optimization to improve the thermo-mechanical properties of the fabricated components by laser powder bed fusion AM. Simulation methods provide financially viable and the least resource-consuming approach for the qualification of produced parts, enabling metallurgical and mechanical characterization in a short time. In this research study, a three-dimensional finite element model is developed to predict the temperature, residual stress, and distortion in nickel-based super alloy parts fabricated by a multi-layer laser powder-bed fusion (LPBF) process, to analyze the thermal and residual stress distributions. For this purpose, a FEM model of LPBF was applied that includes a thermal model representing the scanning laser thermal input, a material model to define the temperature-dependent material property in the cyclic heating and cooling environment, and a physics-based method to describe the layer build-up process. For validation of the results, the experimental results were used, and the validation results were presented.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"26 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123857178","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Cross Section Analysis of Flexible Risers Including Composite Layers 含复合层的柔性立管截面分析
Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems Pub Date : 2022-06-05 DOI: 10.1115/omae2022-81326
G. Skeie, N. Sødahl, D. McGeorge
{"title":"Cross Section Analysis of Flexible Risers Including Composite Layers","authors":"G. Skeie, N. Sødahl, D. McGeorge","doi":"10.1115/omae2022-81326","DOIUrl":"https://doi.org/10.1115/omae2022-81326","url":null,"abstract":"\u0000 Oil and gas exploration and exploitation in deep and ultra-deep waters challenges classical riser technology and configuration. New technologies, including carbon fiber as composite armors, influence weight and strength of the riser. This can allow for more simple configurations compared with conventional ones, simplifies installation procedures and eventually lead to reduced costs. The new fiber reinforced cross section sheaths requires new analytical models in the local stress analysis tools. The current paper explores efficient and accurate implementations of orthotropic laminate sheaths into classical cross section simulation tools. The model is based on a classic partition of the analysis scheme into a combined load and response model consisting of an axisymmetric and pure bending part. The suggested model is based on full 3D elasticity solution that allows for thick cylindrical laminates taking into account all stress and strain components. The model is compared with 3D Abaqus results for a number of different lay-ups and the results show excellent agreement with the more advanced 3D simulations in both axisymmetric and bending response modes. The laminate, a thermoplastic composite layer with carbon fibers, is used as a component in an unbonded flexible pipe. The cross-sectional analysis is thus performed in the classical way.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"136 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116333566","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Low Cycle Fatigue in Risers and Pipelines 立管和管道的低周疲劳
Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems Pub Date : 2022-06-05 DOI: 10.1115/omae2022-78905
G. Mansour
{"title":"Low Cycle Fatigue in Risers and Pipelines","authors":"G. Mansour","doi":"10.1115/omae2022-78905","DOIUrl":"https://doi.org/10.1115/omae2022-78905","url":null,"abstract":"\u0000 It is very-well known that fatigue is a primary driver and challenge for steel catenary risers (SCRs) and potentially for steel lazy wave risers (SLWRs) as well. This challenge can be overcome in several ways, some better than others. However, the first step is to predict the fatigue damage properly. Fatigue in risers designed utilizing the working stress design (WSD) method, where stresses are kept below yield, is typically predicted utilizing a stress versus number of cycles to failure (S-N) approach, referred to as high cycle fatigue (HCF). Riser designed utilizing the load and resistance factor design (LRFD), or limit state design (LSD), or strain-based design (SBD) methods are likely to experience yielding and inelastic strains, especially in extreme and survival conditions. Cycles of stresses exceeding yielding and producing inelastic strains occur also in reel-lay operations and are likely to occur in pipelines subjected to large deflections cycles such as over sleepers. Utilizing HCF approach to predict fatigue in this case is inappropriate and a strain versus number of cycles to failure (ε-2N) approach, referred to as low cycle fatigue (LCF), is typically utilized. A detailed approach to predict the LCF fatigue is presented herein along with examples.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"10 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131994488","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Effect of Low Pretension on the Fatigue Performance of Large Bolts 低预紧力对大型螺栓疲劳性能的影响
Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems Pub Date : 2022-06-05 DOI: 10.1115/omae2022-78556
C. Johnston
{"title":"Effect of Low Pretension on the Fatigue Performance of Large Bolts","authors":"C. Johnston","doi":"10.1115/omae2022-78556","DOIUrl":"https://doi.org/10.1115/omae2022-78556","url":null,"abstract":"\u0000 Large bolts are used in applications which are subjected to fatigue loads, such as the M72 bolts used in ring flanges of wind turbine towers. Pretension is used as a means of protecting bolts against fatigue loading. Design standards require particular levels of pretension to be applied. For example, 70% of the bolt’s proof strength is often specified. However, in practice, bolts may not be experiencing the required level of pretension. Pretensioning procedure, joint face distortion and in-service relaxation can all influence resulting bolt pretension. However, no guidance is available on the fatigue performance of pretensioned bolts when the pretension is less than the specified value. In this work, a series of tests was carried out using a specially designed test jig, which allowed bolts to be pretensioned and then a fatigue load to be applied to the joint faces. Pretension was applied to the bolts using a hydraulic tensioning tool, and the resulting bolt tension was measured using strain gauges. The pretensions used were intentionally less than the recommended level. The fatigue test results showed that it was necessary to apply a significantly higher level of tension (an overtension) with the hydraulic tool prior to tightening the nut in order to achieve a particular target level of pretension. This overtension was more than two times the target tension. In terms of bolt fatigue performance, as expected, increasing the pretension reduced the load range experienced by the bolts and so increased fatigue life. The mean S-N curve for the pretensioned bolts was similar to and slightly higher than the mean S-N curve obtained from bolts tested without pretension. A relationship was derived, which allows bolt load range to be calculated for a given bolt pretension and applied load range.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"30 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132208397","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Development of Fire Integrity Matrix in Order to Achieve Type Approval for FRP Handrails Offshore 开发防火完整性矩阵以实现海上玻璃钢扶手的型式认证
Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems Pub Date : 2022-06-05 DOI: 10.1115/omae2022-80313
S. Eves, D. Filho, Claudio Jarreta, Tom Byrne
{"title":"Development of Fire Integrity Matrix in Order to Achieve Type Approval for FRP Handrails Offshore","authors":"S. Eves, D. Filho, Claudio Jarreta, Tom Byrne","doi":"10.1115/omae2022-80313","DOIUrl":"https://doi.org/10.1115/omae2022-80313","url":null,"abstract":"\u0000 The objective of this project was to develop guidance for a Type Approval for FRP handrails in fire integrity applications offshore. BP, MODEC, PETROBRAS, ABS and NOV Fiber Glass Systems came together to form an FRP Industry Group which developed a Fire Integrity Matrix intended to be used as the basis for a Fire Integrity Type Approval for FRP handrails.\u0000 The notation R0, R3, R2 and R1 performance levels for FRP Handrails were adopted with the aim to correlate these levels as far as possible to already existing Service and Location definitions set out in the PFM 2-98 for FRP Grating. Heat flux and duration requirements for the R0, R3, R2 and R1 performance levels were proposed, based on industry practice and HSE guidance regarding heat flux levels.\u0000 An industry FRP handrail product (MARRS Offshore) was subsequently subjected to the Fire Integrity Matrix tests by Southwest Research Institute in Texas and found to meet all the test requirements. The data was subsequently assessed by ABS and the product was awarded a new Type Approval allowing, for the first time, use in fire integrity applications offshore.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131811991","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
A Novel Free-Standing Riser Concept for Deepwater Developments 用于深水开发的新型独立式立管概念
Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems Pub Date : 2022-06-05 DOI: 10.1115/omae2022-85000
Carlos Terencio Pires Bomfimsilva, T. Netto
{"title":"A Novel Free-Standing Riser Concept for Deepwater Developments","authors":"Carlos Terencio Pires Bomfimsilva, T. Netto","doi":"10.1115/omae2022-85000","DOIUrl":"https://doi.org/10.1115/omae2022-85000","url":null,"abstract":"\u0000 Free-standing hybrid risers (FSHR) are well established in deepwater field developments in the oil & gas industry. The major advantages foreseen for the FSHR are the possibility of safely anticipating production and requiring significantly reduced payloads at the Floating Production Unit (FPU). This work addresses the feasibility of a novel proposed optimized concept, the Free-Standing Integrated Riser (FSIR), where the pipeline is integrated to the riser by means of a transition section, which is kept in place by a multiple line mooring system, developed to keep the functionality and integrity of the entire riser along its lifetime. The work provides the findings from numerical analysis simulated in Orcaflex, a finite element simulation software dedicated to global analysis of risers, considering the design criteria provided in API 2RD Standard. As part of the FSIR evaluation, screening static analysis was performed to identify the most promising configurations for the multiple line mooring system, followed by a series of dynamic analyses to evaluate the behavior of the riser in extreme conditions. In addition, several investigations were performed to assess the functionality and the robustness of the system, including parametric studies to check for installation and dimensional tolerances, assessment of fatigue damage, and checking the impact of pipe size on the design. The results show that proposed novel FSIR concept can provide a practical and economical solution for deepwater projects.","PeriodicalId":367331,"journal":{"name":"Volume 3: Materials Technology; Pipelines, Risers, and Subsea Systems","volume":"64 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127091498","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书