{"title":"Radiation effects in gate-all-around structures","authors":"R. Lawrence, J. Colinge, H. Hughes","doi":"10.1109/SOI.1991.162866","DOIUrl":"https://doi.org/10.1109/SOI.1991.162866","url":null,"abstract":"Gate-all-around (GAA) devices have been characterized by current vs. voltage techniques after being exposed to 10-keV X-rays under a variety of bias conditions. Parameters such as mobility, oxide trapped charge, interface state density, and leakage currents were monitored. The SIMOX (separation by implanted oxygen) GAA device, which has no buried-oxide back-gate, suffers no contribution from traditional back-gate interface effects. The interface state density, as determined from subthreshold slope stretch-out at a 1 Mrad(SiO/sub 2/) X-ray dose, indicates radiation induced D/sub it/ levels of low to mid 10/sup 11/ Hash /eV-cm/sup 2/ for the variety of bias conditions applied. The observed degradation in mobility and interface-state density is a function of the specific gate-oxide process used and not inherent to the GAA process.<<ETX>>","PeriodicalId":367251,"journal":{"name":"1991 IEEE International SOI Conference Proceedings","volume":"68 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116581120","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A silicon-on-insulator circuit for high-temperature, high-voltage applications","authors":"S. Valeri, A. L. Robinson, J. C. Erskine","doi":"10.1109/SOI.1991.162856","DOIUrl":"https://doi.org/10.1109/SOI.1991.162856","url":null,"abstract":"The authors previously proposed the concept of a composite high-voltage device using series-connected low-voltage SOI (silicon-on-insulator) MOSFETs. In the present work, they demonstrate how the composite device can circumvent the fundamental materials limitations of bulk devices for high-voltage, high-temperature applications. Experimental circuits were fabricated on SIMOX (separation by implanted oxygen) substrates using an SOI NMOS process. For the purpose of demonstrations, external resistors were used as the bias elements. Individual transistor breakdown voltages were about 6-7 V, and did not vary significantly from 24 degrees C to 400 degrees C. The composite device characteristics closely resemble those of the individual MOSFETs. In particular, the breakdown voltage (typically 26-30 V) is nearly constant over the temperature range studied. Drain characteristics of a typical five-transistor composite device are shown for several stage temperatures.<<ETX>>","PeriodicalId":367251,"journal":{"name":"1991 IEEE International SOI Conference Proceedings","volume":"181 11","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"113988657","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
H. Seghir, S. Cristoloveanu, R. Jérisian, J. Oualid, A. Auberton
{"title":"Correlation of the leakage current and charge pumping in SIMOX gated diodes","authors":"H. Seghir, S. Cristoloveanu, R. Jérisian, J. Oualid, A. Auberton","doi":"10.1109/SOI.1991.162837","DOIUrl":"https://doi.org/10.1109/SOI.1991.162837","url":null,"abstract":"Gated diodes are very appropriate devices for film and interface characterization in fully depleted SOI (silicon-on-insulator) structures as both leakage current and charge pumping measurements can be performed. The author clarify the merits of each technique, discuss the complementary and overlapping aspects, and correlate the data. Attention is given to P/sup +/PN/sup +/ diodes fabricated on SIMOX (separation by implanted oxygen) wafers implanted with 100 mA beam, 200 keV energy, and 1.8*10/sup 18/ O/cm/sup 2/ dose, and annealed at 1300 degrees C in argon. The Si film was 150-nm thick.<<ETX>>","PeriodicalId":367251,"journal":{"name":"1991 IEEE International SOI Conference Proceedings","volume":"30 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134083649","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
S. Merchant, E. Arnold, H. Baumgart, S. Mukherjee, H. Pein, R. Pinker
{"title":"High-breakdown-voltage devices in ultra-thin SOI","authors":"S. Merchant, E. Arnold, H. Baumgart, S. Mukherjee, H. Pein, R. Pinker","doi":"10.1109/SOI.1991.162901","DOIUrl":"https://doi.org/10.1109/SOI.1991.162901","url":null,"abstract":"The possible advantages of an SOI (silicon-on-insulator) RESURF (reduced surface electric field) device are explored with an idealized lateral diode structure consisting of a P/sup +/ diffusion into an N-silicon-on-insulator film, supported by an N/sup +/ silicon substrate. An optimized structure is shown to have a uniform lateral electric field and a vanishing vertical electric field along the top surface of the depletion region. An analytical model based on ionization integrals indicates that, for very thin SOI, the breakdown voltage increases with decreasing SOI thickness. Two-dimensional numerical breakdown simulations also support this finding. Experimentally, breakdown voltages in excess of 700 V have been demonstrated on diodes having approximately 0.1- mu m-thick SOI layers and 2- mu m-thick buried oxide layers, in excellent agreement with theory. An obvious advantage of this concept lies in the integration of high-voltage devices with high-performance SOI CMOS circuits on a single chip.<<ETX>>","PeriodicalId":367251,"journal":{"name":"1991 IEEE International SOI Conference Proceedings","volume":"49 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134429919","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"SOI material by wafer bonding: an overview","authors":"W. Maszara","doi":"10.1109/SOI.1991.162835","DOIUrl":"https://doi.org/10.1109/SOI.1991.162835","url":null,"abstract":"In wafer bonding work directed toward SOI (silicon-on-insulator) technology, an insulating material, usually SiO/sub 2/, present on one or both silicon wafers is sandwiched between the wafers upon bonding. Subsequent thinning of one of the wafers produces a monocrystalline film of desirable thickness separated from the substrate by the insulator. A method based on the theory of crack propagation has been devised to quantitatively study the bonded interface. In the particular case of oxidized silicon wafers, the bonding exhibits three different phases: a hydrogen-bond process dominates low temperature bonding; Si-O-Si bond formation accompanied by elastic wafer deformation occurs at the intermediate temperatures; and Si-O-Si bond formation is supported by plastic flow of the oxide at the highest temperatures. For most of the wafer bonding applications a controlled thinning of one of the wafers in the pair is required for the formation of a device film.<<ETX>>","PeriodicalId":367251,"journal":{"name":"1991 IEEE International SOI Conference Proceedings","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128410349","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
F. Namavar, E. Cortesi, J. Manke, N. Kalkhoran, B. Buchanan, R. F. Pinizzotto, H. Yang
{"title":"Effect of implantation energy on surface pitting of SIMOX","authors":"F. Namavar, E. Cortesi, J. Manke, N. Kalkhoran, B. Buchanan, R. F. Pinizzotto, H. Yang","doi":"10.1109/SOI.1991.162880","DOIUrl":"https://doi.org/10.1109/SOI.1991.162880","url":null,"abstract":"A systematic study to determine the effect of dose and dose rate on implanting oxygen at 80 and 160 keV is reported. Samples were produced by implanting oxygen into p-type Si","PeriodicalId":367251,"journal":{"name":"1991 IEEE International SOI Conference Proceedings","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121351331","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Microstructural changes in oxygen implanted SOI material at intermediate annealing steps in thermal ramping","authors":"J.C. Park, S. Krause, P. Roitman","doi":"10.1109/SOI.1991.162884","DOIUrl":"https://doi.org/10.1109/SOI.1991.162884","url":null,"abstract":"The authors report on the microstructural changes in HT (high-temperature-implanted) SIMOX (separation by implanted oxygen) at various stages in the ramping process by simulating the thermal treatment with two-hour anneals at intermediate temperatures. The wafers studied were implanted to 1.8*10/sup 18/ cm/sup -2/ at 200 keV at a temperature of 620 degrees C. To simulate the effect of the thermal ramping cycle, wafers were annealed for 2 hours at 50 degrees C intervals from 800 degrees C to 1100 degrees C. Cross section samples were studied with conventional transmission electron microscopy (TEM) techniques at 200 keV. Major microstructural changes are shown to occur in SIMOX during the thermal ramping cycle between temperatures of 900 degrees C and 1100 degrees C. These changes strongly affect, possibly even control, the final defect density and buried oxide microstructure, even prior to the final high temperature anneal. Dislocation formation in SIMOX occurs during thermal ramping, probably between 1000 degrees C and 1100 degrees C. This suggests that it may be possible to further reduce dislocation densities of 10/sup 6/ cm/sup -2/, as found in HT SIMOX, by altering the thermal ramping cycle.<<ETX>>","PeriodicalId":367251,"journal":{"name":"1991 IEEE International SOI Conference Proceedings","volume":"51 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115779109","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"SOI processing by epitaxial lateral overgrowth","authors":"Chitra K. Subramanian, G. Neudeck","doi":"10.1109/SOI.1991.162892","DOIUrl":"https://doi.org/10.1109/SOI.1991.162892","url":null,"abstract":"A SOI (silicon-on-insulator) process using ELO (epitaxial lateral overgrowth) is presented that can be used not only to create local area SOI islands but full wafer SOI as well. A thin full-wafer SOI structure formed with merged ELO has been demonstrated. With minor modification, this SOI process can be successively repeated to produce multiple layers of SOI for future three-dimensional application, since ELO has the advantages of low-temperature processing, ease of interlayer connection, and low cost. This process produces SOI material of very low defect density by using selective epitaxial growth of silicon as compared to other conventional SOI techniques.<<ETX>>","PeriodicalId":367251,"journal":{"name":"1991 IEEE International SOI Conference Proceedings","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127334507","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Study of hot-carrier stress effects on the DC characteristics of SOI NMOST's operating at 4.2 K","authors":"E. Simoen, M. Gao, J. Colinge, C. Claeys","doi":"10.1109/SOI.1991.162827","DOIUrl":"https://doi.org/10.1109/SOI.1991.162827","url":null,"abstract":"The influence of hot-carrier stress on SOI (silicon-on-insulator) transistors, fabricated on different substrate types (Kopin, laser-recrystallized, and SIMOX) and in different technologies, is reported. Different behavior is observed for samples stressed under rather symmetrical bias conditions (e.g., the drain voltage V/sub ds/ approximately=the gate voltage V/sub gs/), called the weak stress condition, compared with devices operated under strong stress (V/sub ds/>>V/sub gs/).<<ETX>>","PeriodicalId":367251,"journal":{"name":"1991 IEEE International SOI Conference Proceedings","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126820504","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"An intelligent-power IC fabricated by SIMOX technology","authors":"T. Ohno, S. Matsumoto, K. Izumi","doi":"10.1109/SOI.1991.162908","DOIUrl":"https://doi.org/10.1109/SOI.1991.162908","url":null,"abstract":"The authors have succeeded in fabricating an IPIC/SIMOX (intelligent power IC/separation by implanted oxygen) which integrates a power UMOS (U-grooved MOSFET) and a CMOS IC on one chip. The availability of the new IPIC has been verified by evaluating its functional operation. It is noted that SIMOX technology offers great potential for fabrication of future intelligent-power LSIs. The structure and electrical characteristics of the fabricated IPIC are described.<<ETX>>","PeriodicalId":367251,"journal":{"name":"1991 IEEE International SOI Conference Proceedings","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1991-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125964576","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}