Cement Concrete and Aggregates最新文献

筛选
英文 中文
Control of Cracking In Bridge Decks: Observations From The Field 桥面裂缝控制:来自现场的观察
Cement Concrete and Aggregates Pub Date : 2004-12-04 DOI: 10.1520/CCA12320
D. Darwin, J. Browning, W. Lindquist
{"title":"Control of Cracking In Bridge Decks: Observations From The Field","authors":"D. Darwin, J. Browning, W. Lindquist","doi":"10.1520/CCA12320","DOIUrl":"https://doi.org/10.1520/CCA12320","url":null,"abstract":"Crack surveys of bridge decks, performed over a 10-year period in northeast Kansas as part of three studies, provide strong guidance in identifying the parameters that control cracking in these structures. The surveys involve steel girder bridges—bridges that are generally agreed to exhibit the greatest amount of cracking in the concrete decks. The surveys include monolithic decks and decks with silica fume and conventional concrete overlays. The study demonstrates that crack density increases as a function of cement and water content, and concrete strength. In addition, crack density is higher in the end spans of decks that are integral with the abutments than decks with pin-ended supports. Most cracking occurs early in the life of a bridge deck, but continues to increase over time. This is true for bridges cast in both the 1980s and the 1990s. A key observation, however, is that bridge decks cast in the 1980s exhibit less cracking than those in the 1990s, even with the increase in crack density over time. Changes in materials, primarily cement fineness, and construction procedures over the past 20 years, are discussed in light of these observations. A major bright spot has been the positive effect of efforts to limit early evaporation, suggesting that the early initiation of curing procedures will help reduce cracking in bridge decks.","PeriodicalId":366022,"journal":{"name":"Cement Concrete and Aggregates","volume":"38 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2004-12-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127687990","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 62
Effect of Finishing Practices on Performance of Concrete Containing Slag and Fly Ash as Measured by ASTM C 672 Resistance to Deicer Scaling Tests 用ASTM C 672抗除冰器结垢试验测定的精加工方法对含矿渣和粉煤灰混凝土性能的影响
Cement Concrete and Aggregates Pub Date : 2004-12-04 DOI: 10.1520/CCA11923
P. Taylor, W. Morrison, V. Jennings
{"title":"Effect of Finishing Practices on Performance of Concrete Containing Slag and Fly Ash as Measured by ASTM C 672 Resistance to Deicer Scaling Tests","authors":"P. Taylor, W. Morrison, V. Jennings","doi":"10.1520/CCA11923","DOIUrl":"https://doi.org/10.1520/CCA11923","url":null,"abstract":"This article reports on a study undertaken to assess whether the apparent poor performance of concretes containing supplementary cementing materials (in ASTM C 672, Test Method for Scaling Resistance of Concrete Surfaces Exposes to Deicing Chemicals) can be attributed to differences in finishing effort and/or timing of finishing. The authors developed a test method to evaluate Portland cement systems with different air contents. Three mixes were prepared with the same nominal 28-day strength and air content, and similar aggregate and cementitious materials content. One concrete mixture contained Type I Portland cement, the second concrete mixture contained ground granulated blast furnace slag at 50% cement replacement, and the third concrete mixture had fly ash at 25% cement replacement. Nine slabs were cast from each mix; all of the slabs were tested for 50 cycles after the slabs had been cured for 14 days moist and then 14 days laboratory air. In general, results showed that late finishing was beneficial in the OPC mixes, while early finishing appears to be beneficial in the mixes containing fly ash and slag. Parameters that appear to be significant include: time of finishing, relative to the amount, rate and period of bleeding; time of finishing relative to loss of workability (slump); and rate of strength gain of the mixture at the age at which tests are conducted.","PeriodicalId":366022,"journal":{"name":"Cement Concrete and Aggregates","volume":"50 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2004-12-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130131013","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 9
A New Method for Evaluating the Risk of DEF 一种新的DEF风险评估方法
Cement Concrete and Aggregates Pub Date : 2004-12-04 DOI: 10.1520/CCA11864
A. Tagnit-Hamou, N. Petrov
{"title":"A New Method for Evaluating the Risk of DEF","authors":"A. Tagnit-Hamou, N. Petrov","doi":"10.1520/CCA11864","DOIUrl":"https://doi.org/10.1520/CCA11864","url":null,"abstract":"The premature deterioration of concrete and mortars due to delayed ettringite formation (DEF) is a known problem. Because many parameters influence DEF and consequent expansion, a reliable, simple, and relatively rapid experimental method to evaluate potential DEF is needed. In this article, a new method involving a slight acceleration of curing is proposed to evaluate the sensitivity of a particular cement or particular mortars to DEF and consequent expansion. This method can be used to determine the maximum concrete temperature below which the risk of DEF is minimal and acceptable. After a heat curing, the specimens were kept in lime-saturated water. On the seventh day, they were submitted to six daily thermal cycles (plus 50 to plus 10 deg C). The results show that expansion is greater when thermal cycles are applied compared to control specimens. Therefore, the absence of expansion of some mortars submitted to thermal cycles enables us to accept the mix, even if the curing temperature is 90 deg C. This method has been applied successfully in mortar specimens. However, it is not yet clear if the mortar prism expansion test can lead to a good prediction of the behavior of concrete prisms, and especially to a prediction for real precast or cast-in-place concrete elements.","PeriodicalId":366022,"journal":{"name":"Cement Concrete and Aggregates","volume":"64 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2004-12-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124157337","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
Pre-Soaked Lightweight Aggregates as Additives for Internal Curing of High-Strength Concretes 预浸轻骨料在高强混凝土内养护中的应用
Cement Concrete and Aggregates Pub Date : 2004-12-04 DOI: 10.1520/CCA12295
K. Kovler, Andrew Souslikov, A. Bentur
{"title":"Pre-Soaked Lightweight Aggregates as Additives for Internal Curing of High-Strength Concretes","authors":"K. Kovler, Andrew Souslikov, A. Bentur","doi":"10.1520/CCA12295","DOIUrl":"https://doi.org/10.1520/CCA12295","url":null,"abstract":"Self-desiccation and autogenous shrinkage of high-strength concretes is one of their drawbacks which cannot be readily accommodated by conventional curing. The concept of internal curing using lightweight soaked aggregates, to provide internal reservoirs of water which enable uniform curing of the whole cross-section, has been advanced by several groups. The present study is intended to develop this approach further, by optimizing the porosity and size of the aggregates to enable successful internal curing with only a small amount of aggregates, which could be viewed as additives rather than bulk replacement of conventional aggregates. The approach taken was to increase the porosity of the aggregates and reduce their size, to obtain a system with numerous internal reservoirs of sufficiently small spacing to allow water to be readily discharged from the aggregate and transported over the whole range of the matrix. It was shown that aggregates with porosities of about 50% by volume, a size of a few millimeters, and contents of less than 50 kg/m3 could provide full elimination of autogenous shrinkage in concretes having w/cm as low as 0.25, with only a small affect on strength. The parameters controlling the efficiency of the aggregates were assessed, indicating that their pore structure is the most important one, and that water from within the aggregates can be readily transported into the matrix to a distance of few millimeters.","PeriodicalId":366022,"journal":{"name":"Cement Concrete and Aggregates","volume":"12 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2004-12-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126872560","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 28
Influence of Specimen Geometry, Orientation of Casting Plane, and Mode of Concrete Consolidation on Expansion Due To ASR 试件几何形状、浇筑面取向和混凝土固结方式对ASR膨胀的影响
Cement Concrete and Aggregates Pub Date : 2004-12-04 DOI: 10.1520/CCA11927
N. Smaoui, M. Bérubé, B. Fournier, B. Bissonnette
{"title":"Influence of Specimen Geometry, Orientation of Casting Plane, and Mode of Concrete Consolidation on Expansion Due To ASR","authors":"N. Smaoui, M. Bérubé, B. Fournier, B. Bissonnette","doi":"10.1520/CCA11927","DOIUrl":"https://doi.org/10.1520/CCA11927","url":null,"abstract":"Concrete specimens of different sizes and shapes were made with various reactive aggregates and stored under conditions favorable to the development of alkali-silica reactivity (ASR), with their expansion measured with time along the three directions. They have been cast vertically (cylinders and prisms) or horizontally (prisms and larger blocks), using a vibrating table, a vibrating needle, or rodding. The expansion due to ASR was always greater in the direction perpendicular to the casting plane. The higher the number of flat and elongated particles in the reactive aggregate, the higher the coefficient of anisotropy, defined as the ratio between the expansions perpendicular and parallel to the casting plane. This coefficient was constant through the course of the expansion. It was generally higher for the cylinders than for the prisms, and still less for larger blocks. Consolidation by rodding induced anisotropy coefficients distinctly smaller than consolidation using a vibrating table, while a vibrating needle induced intermediate values; however, all methods gave constant volumetric expansion at least up to an important expansion level. For prisms cast horizontally and measured axially in accordance with the concrete test CSA A23.2-14A or ASTM C 1293, consolidation using rodding induced long-term (axial) expansions greater by 71% compared with consolidation using a vibrating table. In order to reduce the experimental variability of the test, only one method of consolidation should be allowed. When evaluating field concrete affected by ASR, it appears important to consider the orientation with respect to the casting plane of the core samples subjected to mechanical or residual expansion tests.","PeriodicalId":366022,"journal":{"name":"Cement Concrete and Aggregates","volume":"71 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2004-12-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126809250","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 47
Potential For Restrained Shrinkage Cracking of Concrete and Mortar 混凝土和砂浆抑制收缩开裂的潜力
Cement Concrete and Aggregates Pub Date : 2004-12-04 DOI: 10.1520/CCA12305
H. T. See, E. Attiogbe, M. Miltenberger
{"title":"Potential For Restrained Shrinkage Cracking of Concrete and Mortar","authors":"H. T. See, E. Attiogbe, M. Miltenberger","doi":"10.1520/CCA12305","DOIUrl":"https://doi.org/10.1520/CCA12305","url":null,"abstract":"Historically, ring tests have been performed to determine the time for concrete or mortar specimens to crack under restrained shrinkage. When the concrete or mortar ring deforms due to shrinkage, the steel ring restrains the material and tensile stresses are induced. Stress development cannot be monitored for test setups in which the degree of restraint is so high that no measurable deformation occurs in the steel as the material shrinks. Such test setups have provided qualitative evaluations and have not enabled a simple procedure to be established to routinely quantify the restrained shrinkage characteristics of the materials. In this study, an instrumented ring setup is used to quantify the restrained shrinkage behavior of concrete and mortar. The setup provides a high degree of restraint while still allowing sufficient strain in the steel as the material shrinks. It is shown with the ring setup that the cracking potential of concrete or mortar under restrained shrinkage can be classified on the basis of either how long it takes the material to crack or the rate of stress development in the material. The testing and analysis procedure provides a rational basis for assessing the relative performance of concrete or mortar mixtures when subjected to shrinkage under restraint. A simple procedure is also developed for a preliminary assessment of cracking potential using standard values of drying shrinkage and modulus of elasticity obtained at seven days after initiation of drying.","PeriodicalId":366022,"journal":{"name":"Cement Concrete and Aggregates","volume":"26 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2004-12-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129349871","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 52
Resistance To Freezing and Thawing Cycles and Scaling Resistance of Very High Early Strength Concrete 超高早强混凝土的抗冻融循环性能及抗结垢性能
Cement Concrete and Aggregates Pub Date : 2004-12-04 DOI: 10.1520/CCA12074
M. Kurtz, D. Constantiner
{"title":"Resistance To Freezing and Thawing Cycles and Scaling Resistance of Very High Early Strength Concrete","authors":"M. Kurtz, D. Constantiner","doi":"10.1520/CCA12074","DOIUrl":"https://doi.org/10.1520/CCA12074","url":null,"abstract":"A very high early strength (VHES) Portland cement-based concrete can be used to prevent long closures of highway lanes by completing any necessary repairs overnight. This technology has been embraced by several Departments of Transportation (DOT), including those in areas where the concrete will be subjected to freezing and thawing cycles, even though the technique was first used in California (where the concrete is typically not subjected to freezing and thawing). Flexural strength of VHES concrete is the critical parameter to permit traffic flow without damage to the concrete. This article presents data showing that it is possible to attain the necessary strength and achieve adequate resistance to freezing and thawing cycles. The evidence presented includes accelerated testing using ASTM C 666, Procedure A, and scaling resistance using ASTM C 672. For scaling resistance of VHES concrete, adequate air-entrainment is necessary, but the requirements for the air-void system are less stringent than those for conventional concrete. The authors present additional evidence showing that VHES concrete of low w/c (water to cement ratio) can be durable with larger than acceptable spacing factor levels or without air entrainment.","PeriodicalId":366022,"journal":{"name":"Cement Concrete and Aggregates","volume":"94 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2004-12-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114708821","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 5
Measurement of Particle Size Distribution In Portland Cement Powder: Analysis of ASTM Round-Robin Studies 波特兰水泥粉中粒径分布的测量:ASTM循环研究分析
Cement Concrete and Aggregates Pub Date : 2004-12-04 DOI: 10.1520/CCA11920
C. Ferraris, V. Hackley, A. Avilés
{"title":"Measurement of Particle Size Distribution In Portland Cement Powder: Analysis of ASTM Round-Robin Studies","authors":"C. Ferraris, V. Hackley, A. Avilés","doi":"10.1520/CCA11920","DOIUrl":"https://doi.org/10.1520/CCA11920","url":null,"abstract":"A distribution of particle sizes or particle size distribution (PSD) is a fundamental characteristic of cement powder. Accurate PSDs are required in computational efforts to model the hydration process and it is an important practical issue for the cement industry. Presently, the only available standard method for measuring the PSD of cement, namely ASTM C115, is limited in scope, with a lower size detection limit of 7.5 μm. Since there are no standard procedures that adequately cover the broad particle size range associated with portland cement powder, the implementation of different measurement techniques varies widely within the industry. Two ASTM-sponsored round robin tests were performed to (1) ascertain the techniques and methods currently used in the cement industry and (2) develop and refine a standard method or methods. The results have been incorporated into a best practice method based on the technique of laser diffraction. The aim of the current paper is to summarize the findings based on the data generated during the round robins and to summarize the various approaches available to measure the PSD of cement. A summary of the statistical analysis of the test results is described.","PeriodicalId":366022,"journal":{"name":"Cement Concrete and Aggregates","volume":"112 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2004-12-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123883686","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 71
Modeling Drying Shrinkage Stress Gradients in Concrete 混凝土干缩应力梯度模型
Cement Concrete and Aggregates Pub Date : 2004-12-04 DOI: 10.1520/CCA12302
Z. Grasley, D. Lange
{"title":"Modeling Drying Shrinkage Stress Gradients in Concrete","authors":"Z. Grasley, D. Lange","doi":"10.1520/CCA12302","DOIUrl":"https://doi.org/10.1520/CCA12302","url":null,"abstract":"Cracking is a problem for the serviceability, durability, and aesthetic quality of concrete structures and pavements. The potential for drying shrinkage cracking in concrete is related, in part, to the development of a moisture gradient across the cross-section of the concrete element. This article reports on a model that has been developed that incorporates experimental measurements of internal relative humidity to investigate drying shrinkage stress gradients in concrete specimens. The authors outline the experimental and analytical procedure for using the model. The authors conclude that initial research involving application of the model has indicated that there is a relationship between drying stress gradient severity and the time to cracking under full restraint. Further development of the model could involve combination with fracture models to investigate microcrack formation and propagation.","PeriodicalId":366022,"journal":{"name":"Cement Concrete and Aggregates","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2004-12-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129424693","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 38
Discussion of “Role of Fly Ash and Aluminum Addition on Ettringite Formation In Line—Remediated Mine Tailings” by A. M. O. Mohamed, Mr. Hassein, and F. P. Hassani A. M. O. Mohamed, Mr. Hassein和F. P. Hassani对“粉煤灰和铝添加对线修复尾矿中钙矾石形成的作用”的讨论
Cement Concrete and Aggregates Pub Date : 2004-12-04 DOI: 10.1520/CCA12479
W. Hime
{"title":"Discussion of “Role of Fly Ash and Aluminum Addition on Ettringite Formation In Line—Remediated Mine Tailings” by A. M. O. Mohamed, Mr. Hassein, and F. P. Hassani","authors":"W. Hime","doi":"10.1520/CCA12479","DOIUrl":"https://doi.org/10.1520/CCA12479","url":null,"abstract":"","PeriodicalId":366022,"journal":{"name":"Cement Concrete and Aggregates","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2004-12-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115745946","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书