Y. Kimura, M. Okamura, S. Yamada, H. Shimamoto, M. Yoshida
{"title":"Practical application of laser inner lead bonding to TAB devices over 500 pin counts","authors":"Y. Kimura, M. Okamura, S. Yamada, H. Shimamoto, M. Yoshida","doi":"10.1109/IEMT.1994.404715","DOIUrl":"https://doi.org/10.1109/IEMT.1994.404715","url":null,"abstract":"Tape automated bonding (TAB) is a key process for high pin count and high speed LSI devices. We developed a fully automated laser inner lead bonder for 500-1000 pin class TAB devices. The laser bonding was applied to 600-lead, 15/spl times/15 mm device having 96 /spl mu/m lead pitch. This laser bonder consists of a pulsed Nd:YAG laser, a laser beam positioner with a real time bonding process monitor, a lead inspection head, a bonding stage, loading and unloading mechanisms of wafers and tape carriers, and their controller. The bonder had a total bonding accuracy of 10 /spl mu/m, a bonding rate of 6 leads per second. No failures were observed after environmental tests. From the thermal analysis of the bonding area under laser irradiation, the contact states between the lead and the bump were the most important parameter for good bonding process. The real time monitoring of the lead temperature with an infrared sensor verified the analysis results thus providing an effective method to estimate bonding quality.<<ETX>>","PeriodicalId":363167,"journal":{"name":"Proceedings of 16th IEEE/CPMT International Electronic Manufacturing Technology Symposium","volume":"128 4","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1994-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120988840","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Process control of the lead scanning process [IC packages]","authors":"S. Kumar, R. Truesdale","doi":"10.1109/IEMT.1994.404685","DOIUrl":"https://doi.org/10.1109/IEMT.1994.404685","url":null,"abstract":"The process flow of a scanner was thoroughly looked at. The process flow revealed that accuracy, repeatability, and handling of the parts are the key elements. Through research it was also determined that GR&R and design of experiments were necessary to optimize the scanner parameters. It was also determined that physical handling of the parts created more rejects. Therefore, for performing quality control gates we used full tube or tray quantities to eliminate the human factor. This drove the quality to new highs. There was also automation added to the existing scanners, but before releasing to production the key elements were thoroughly characterized. The SPC charts were also custom-made for the new scanner based on the confidence level of the modified machine. Initially, the frequency was high, but with statistical data, it was eventually back to normal conditions.<<ETX>>","PeriodicalId":363167,"journal":{"name":"Proceedings of 16th IEEE/CPMT International Electronic Manufacturing Technology Symposium","volume":"23 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1994-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121897247","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"An approach for optimizing WIP/cycle time/output in a semiconductor fabricator","authors":"G. Leonovich","doi":"10.1109/IEMT.1994.404682","DOIUrl":"https://doi.org/10.1109/IEMT.1994.404682","url":null,"abstract":"The relationships between work in progress (WIP), cycle time, and daily going rates (DGR) are relatively well understood. However, selecting parameters for optimum operation in a fabricator is more of an art form than an analytical process. This paper describes a process used in our 0.7 /spl mu/m wafer fabricator at IBM Microelectronics in Essex Junction, Vermont, to optimize these parameters. This process uses real manufacturing-line data to quantify tool and organizational capabilities, which are then consolidated at the line level. Line and department targets are set to optimize unit costs, cycle time, and to drive day-to-day as well as long-term learning plans. In addition, this paper attempts to bridge empirical data to the queuing theory models.<<ETX>>","PeriodicalId":363167,"journal":{"name":"Proceedings of 16th IEEE/CPMT International Electronic Manufacturing Technology Symposium","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1994-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128971612","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Stress and coplanarity analysis of 225 BGA package","authors":"N. Chidambaram, M. Papageorge","doi":"10.1109/IEMT.1994.404732","DOIUrl":"https://doi.org/10.1109/IEMT.1994.404732","url":null,"abstract":"Stress and warpage analysis results of a 225 plastic Ball Grid Array (BGA) package with different design options are presented in this paper. The effect of package design parameters such as mold compound type, substrate thickness and mold corner radius are modeled and compared to measurements. Maximum stress occurs at the corner of the die and coplanarity strongly depends on mold compound and board thickness.<<ETX>>","PeriodicalId":363167,"journal":{"name":"Proceedings of 16th IEEE/CPMT International Electronic Manufacturing Technology Symposium","volume":"91 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1994-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124591497","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Quantitative data for design models","authors":"J. Lawson","doi":"10.1109/IEMT.1994.404709","DOIUrl":"https://doi.org/10.1109/IEMT.1994.404709","url":null,"abstract":"New product development has the objective of meeting customer requirements and being producible. In order to have a design meet these objectives, the concurrent engineering team must use metrics to manage the design process from concept to production. In some cases the chosen metrics use concepts that are not always intuitive for the engineers on the team. Also they are not sure where to get the data that is necessary to make a good estimate of the metric. In many cases they have been trained in the arithmetic for computing the mean, standard deviation, and variance, but when it comes to making predictions of these, there is sometimes confusion. This paper will discuss a design process that focuses on critical product requirements, for which statistical values are assigned to each parameter in order to be aware of the target and the variation to be expected. Sources of data will be discussed that can make this design modeling exercise meaningful. The purpose of this work was to better identify the methods to be used in the design concept stage for evaluating the capability of a product to meet its quantitative performance and producibility requirements.<<ETX>>","PeriodicalId":363167,"journal":{"name":"Proceedings of 16th IEEE/CPMT International Electronic Manufacturing Technology Symposium","volume":"51 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1994-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130523349","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Requirements for next generation manufacturing systems (NGMS)","authors":"J. Jordan, P. Bunce","doi":"10.1109/IEMT.1994.404714","DOIUrl":"https://doi.org/10.1109/IEMT.1994.404714","url":null,"abstract":"Next Generation Manufacturing Systems (NGMS) will support Next Generation Manufacturing Enterprises (NGMEs). NGMEs have been characterized as virtual enterprises, dynamically combining customers, multiple design and production entities, and suppliers, into organizations that will form to meet a customer need, fulfil the need, and then dissolve. NGMEs are expected be the dominant form of manufacturing enterprise in a time of unpredictable competitive challenges and a rapidly, chaotically, changing global business environment.<<ETX>>","PeriodicalId":363167,"journal":{"name":"Proceedings of 16th IEEE/CPMT International Electronic Manufacturing Technology Symposium","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1994-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129286678","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Evaluation of lead-free eutectic Sn-Ag solder for automotive electronics packaging applications","authors":"D. Shangguan, A. Achari","doi":"10.1109/IEMT.1994.404695","DOIUrl":"https://doi.org/10.1109/IEMT.1994.404695","url":null,"abstract":"This paper presents the evaluation results on the lead-free eutectic Sn-Ag solder for use in automotive electronics packaging applications. The major areas of study are the metallurgical interactions between the solder, the conductor, and the component termination, and their impact on reliability. Studies have been conducted with the eutectic Sn/Pb solder as a control group for comparison.<<ETX>>","PeriodicalId":363167,"journal":{"name":"Proceedings of 16th IEEE/CPMT International Electronic Manufacturing Technology Symposium","volume":"46 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1994-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131030927","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Ball grid array assembly issues in manufacturing","authors":"S. Rao","doi":"10.1109/IEMT.1994.404730","DOIUrl":"https://doi.org/10.1109/IEMT.1994.404730","url":null,"abstract":"Ball Grid Array (BGA), Tape Ball Grid Array (TBGA) and other area array surface mount packages offer great advantages to the system designer in terms of performance enhancement as well as possible overall lower costs. From a volume manufacturing (in assembly) perspective there are advantages and drawbacks. Package warp, as well as the hidden interconnects are definite concerns. However there are solutions. The assembly challenges are discussed along with solutions that may be put in place in volume manufacturing. The results of an implemented robust manufacturing process are discussed along with metallurgical cross-sections. X-ray scanning beam laminograph results of good as well bad joints are presented. Results of assembled BGA cards subjected to accelerated reliability tests are also reviewed.<<ETX>>","PeriodicalId":363167,"journal":{"name":"Proceedings of 16th IEEE/CPMT International Electronic Manufacturing Technology Symposium","volume":"27 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1994-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124386007","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Harris Semiconductor Division's journey to self-directed work teams","authors":"S. Gilmore, E. Rose, R. Odom","doi":"10.1109/IEMT.1994.404678","DOIUrl":"https://doi.org/10.1109/IEMT.1994.404678","url":null,"abstract":"Trust is the root of an empowered workforce. Managers and employees must be trustworthy. Without trust, the self-directed work team will fail. The new team structure requires management to learn a coaching style of leadership. Employees learn interpersonal skills while expanding their technical skill sets. Learning is centered around a win-win philosophy-an essential ingredient for a culture that values cooperation among all of its employees. Employees must be skilled in communication, planning, organizing and problem solving. Management will need to define initial structures, provide resources, and set expectations for key metrics so the teams can measure and assess their performance and growth.<<ETX>>","PeriodicalId":363167,"journal":{"name":"Proceedings of 16th IEEE/CPMT International Electronic Manufacturing Technology Symposium","volume":"56 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1994-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114756837","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Guidelines for statistically based sampling reduction","authors":"D. Pepper","doi":"10.1109/IEMT.1994.404710","DOIUrl":"https://doi.org/10.1109/IEMT.1994.404710","url":null,"abstract":"Presented are general guidelines, with examples, for sample reduction and monitor elimination in a high-volume manufacturing environment. Although statistical soundness is never overlooked, this focus on sampling is from a practical point of view. That is, can we have this level of sampling indefinitely and still run a profitable operation? Examples are taken from a factory where comprehensive sample reduction has led to substantial cost savings.<<ETX>>","PeriodicalId":363167,"journal":{"name":"Proceedings of 16th IEEE/CPMT International Electronic Manufacturing Technology Symposium","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1994-09-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116896430","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}