Proceedings of the 2nd International Conference on Electrical and Electronic Engineering (EEE 2019)最新文献

筛选
英文 中文
Design of Fiber Optic Gyro Inertial Measurement System with High Vibration Resistance 高抗振光纤陀螺惯性测量系统的设计
Dong-sheng Yang
{"title":"Design of Fiber Optic Gyro Inertial Measurement System with High Vibration Resistance","authors":"Dong-sheng Yang","doi":"10.2991/EEE-19.2019.32","DOIUrl":"https://doi.org/10.2991/EEE-19.2019.32","url":null,"abstract":"Because the inertial measurement system based on traditional inertial device cannot meet the requirements of the new tactical weapons, this paper demonstrates an inertial measurement system using full digital fiber optic gyro, impact resistant quartz accelerometer and ontology thin-walled reinforced metal alloy structure. It can be able to withstand severe shock, vibration and other mechanical environmental conditions and maintain a good accuracy, a long-term stability, improve the comprehensive performance of the inertial measurement system. Introduction Inertial measurement system is the realization of a missile, rocket and other vehicle guidance and stability control of key sensitive measuring equipment and benchmark information source, can be set benchmark coordinate system for the aircraft during flight, sensitive to the movement of the angular velocity and acceleration, accurate measuring posture, such as position, velocity, and high speed output data through the interface, at the same time as the inertial guidance and attitude control system to provide the measurement information, in order to realize stable flight, hit the target. New tactical weapons not only requires rapid response, mobile penetration and precision strike capability, also require miniaturization, multi-function, maintain high reliability in harsh environmental conditions, to adapt to the strong vibration, big impact and overload, and maintain long-term, stable performance and high life, able to keep stable performance under long-term storage conditions, the inertial measurement system of high demands are put forward. Inertial measurement system based on traditional inertial components often with imu, structure and accelerating rate gyroscope power system separation methods such as it is difficult to realize miniaturization, because there are a high speed rotor, mechanical inertial instrument itself ant-vibration performance is poor, external connection depends on the shock absorber can adapt to play on the bad mechanical environment request, this needs in service during test, calibration and maintenance for many times, long-term stability can't guarantee anything, but later period maintenance cost is high, the above analysis shows that the inertial measurement system based on traditional inertial device cannot meet the requirements of the new tactical weapons. Fiber optic gyro is a new type of solid-state inertial instrument based on the Sagnac effect, has small volume, light weight, high reliability, resistance to vibration and impact, as well as good mechanical environment characteristics, and optical fiber gyro inertial measurement system for its excellent performance as the key support of the new guidance and control system is being developed at home and abroad of new and high technology. The size of the fiber optic gyroscope developed in the initial stage is large, and the inner optical path of the fiber optic gyroscope and the fiber optic ring are not cured and pac","PeriodicalId":358224,"journal":{"name":"Proceedings of the 2nd International Conference on Electrical and Electronic Engineering (EEE 2019)","volume":"188 ","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120884498","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Interval State Estimation Considering Randomness of Multiple Distributed Generations in Active Distribution Networks 主动配电网中考虑随机多代分布的区间状态估计
Xiao-ping Yang, Yang Guo
{"title":"Interval State Estimation Considering Randomness of Multiple Distributed Generations in Active Distribution Networks","authors":"Xiao-ping Yang, Yang Guo","doi":"10.2991/EEE-19.2019.16","DOIUrl":"https://doi.org/10.2991/EEE-19.2019.16","url":null,"abstract":"The high-permeability Distributed Generation (DG) was connected to the power grid, so that the state estimation of the active distribution network(ADN) needs to consider the uncertainty of the DG output. In this paper, an interval state estimation method for active distribution network considering the randomness of Wind Turbine and PV output is proposed. The method uses the Extreme Learning Machine (ELM) to model the randomness of Wind Turbines and PV output in the form of interval numbers, and to perform ultra-short-term prediction on Wind Turbines and PV output interval, and use the output interval as pseudo measurement, based on the particle swarm optimization(PSO) State estimation of the ADN. The results of IEEE-33 system verification show that the state estimation results obtained by PSO algorithm are more accurate than the traditional weighted least square (WLS); the state estimation result presents an interval form, which can provide the dispatcher with a more intuitive system state quantity upper and lower bound information. Introduction The intermittent power generation of high-permeability DG makes it necessary to consider more uncertain factors. The accuracy of the estimation results obtained by traditional methods can not meet the dispatching requirements[1]. Therefore, it is worthwhile to model reasonably the uncertainty of DG output and increase accuracy of AND state estimation. For the uncertain modeling of DG output, literature [2] regards DG output as the pseudomeasurement, ignoring the influence of DG output uncertainty. Document [3] treats DG as active power and reactive power injection nodes, but no specific physical model of DG is established. Literature [4] established a dynamic probability model of DG based on the difference in probability characteristics of DG at each time. However, the state estimation based on the probability distribution must obtain the detailed prior probability density function of each uncertainty in advance, carry out a large number of photovoltaic and wind power related data statistics, and make a prior assumption on the probability distribution of prediction errors, which results in a long time to solve the algorithm[5]. In addition, the probability density function of photovoltaic and wind power output is generally difficult to obtain, and it is only known in most cases. Upper and lower limits of power fluctuation [6]. Therefore, the interval number model can be used to describe the uncertainty problem in the state estimation model, so that it is not necessary to obtain the specific distribution of the parameters, and only need to pay attention to the upper and lower bounds of each uncertain variable, so the engineering application value is greater [7]. To solve these problems, an interval state estimation method considering the uncertainties of DG output is proposed in this paper. The example is verified by IEEE-33 system. Uncertainty Modeling of DG Output Photovoltaic Output Prediction Model The","PeriodicalId":358224,"journal":{"name":"Proceedings of the 2nd International Conference on Electrical and Electronic Engineering (EEE 2019)","volume":"44 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123304800","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Research on Radar Jamming Evaluation Method Based on BP Neural Network 基于BP神经网络的雷达干扰评估方法研究
Song Zhang, Ye-rong Tao, Ya-xin Zhao, Yuantao Chen
{"title":"Research on Radar Jamming Evaluation Method Based on BP Neural Network","authors":"Song Zhang, Ye-rong Tao, Ya-xin Zhao, Yuantao Chen","doi":"10.2991/EEE-19.2019.48","DOIUrl":"https://doi.org/10.2991/EEE-19.2019.48","url":null,"abstract":"The radar interference effect evaluation method is a research hotspot in the field of radar countermeasures. In a complex battlefield environment, the assessment of interference effects by a single indicator usually does not reflect the actual state of the battlefield. Aiming at the complexity of radar interference evaluation on modern battlefields, this paper combines the effects of suppressive interference evaluation and deceptive interference, and uses neural network method to evaluate the composite interference effect. Firstly, the related knowledge of neural network and BP neural network is introduced. Then an interference effect evaluation model based on BP neural network is established. Finally, the simulation model is used for simulation analysis. Introduction With the emergence of various new technologies and new system radars, modern radar countermeasure technology has developed to a very high level. In order to suppress interference, modern radars often use a variety of anti-interference methods. Correspondingly, some new types of interference equipment and interference technologies have emerged, and their purpose is exactly the opposite of radar, which is to more effectively interfere with the radar. For the interfering party, it is mainly concerned with whether the interference is effective or effective for the radar; while the radar side is concerned about its ability to work under interference conditions or its ability to resist interference. In fact, the two can be unified into one problem, which is the interference evaluation problem. At present, when introducing the evaluation indicators, the evaluation indicators of suppressed and deceptive interference are separately introduced. Because the two modes of action are different, the measurement methods of interference effects are also different. However, in the actual operational environment, both sides of the electronic confrontation will not use only a single interference mode. This results in both the components of the radar system that suppress interference and the components that deceive interference during an operation. Moreover, some suppression interferences can also exhibit certain characteristics of deceptive interference under certain conditions, such as smart suppression of interference. Therefore, in a complex battlefield environment, the assessment of the interference effect and the deceptive interference are usually not reflected in the actual battlefield conditions. Aiming at the complexity of radar interference evaluation on modern battlefields, this paper combines the effects of suppressive interference evaluation and deceptive interference, and uses neural network method to evaluate the composite interference effect. The following will first introduce the relevant knowledge of neural network and BP neural network, and then establish a BP neural network based interference effect evaluation model, and finally use the simulation model for simulation analysis. 2nd I","PeriodicalId":358224,"journal":{"name":"Proceedings of the 2nd International Conference on Electrical and Electronic Engineering (EEE 2019)","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123465258","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Control Strategy Research on Drugs Input in Intelligent Pharmacy Express Dispensing System 智能药房快递调剂系统药品输入控制策略研究
Da-zhi Zhang, Jun-feng Cui
{"title":"Control Strategy Research on Drugs Input in Intelligent Pharmacy Express Dispensing System","authors":"Da-zhi Zhang, Jun-feng Cui","doi":"10.2991/EEE-19.2019.40","DOIUrl":"https://doi.org/10.2991/EEE-19.2019.40","url":null,"abstract":"In order to improve the working efficiency of drugs input in intelligent pharmacy express dispensing system, the route planning based on the improved genetic algorithms is proposed for express dispensing system with complicated boxed drugs and numerous storage space. This paper establishes a TSP problem model for drug input route planning, analyzes drug storage location information and drug prescription information, and performs simulation experiments on Matlab platform. The results show that the new strategy of drugs input can improve work efficiency greatly in comparison with the traditional modes. The time of storage is shortened, and the efficiency is increased from 11 percent to 48 percent.","PeriodicalId":358224,"journal":{"name":"Proceedings of the 2nd International Conference on Electrical and Electronic Engineering (EEE 2019)","volume":"160 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115970059","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Rapid Autofocus Method for Optical Microscopes Using Dual Photodetectors 双光电探测器光学显微镜的快速自动聚焦方法
Yanxun Guo, Dingrong Yi, D. Li
{"title":"Rapid Autofocus Method for Optical Microscopes Using Dual Photodetectors","authors":"Yanxun Guo, Dingrong Yi, D. Li","doi":"10.2991/EEE-19.2019.36","DOIUrl":"https://doi.org/10.2991/EEE-19.2019.36","url":null,"abstract":"Aiming at solving the problems of low-efficiency and high-cost of existing auto-focusing methods for microscopic imaging, an on-line auto-focusing method is proposed and developed using dual photodetectors. Firstly, two identical photodetectors are placed in symmetrical positions with equal distance away from the focal plane in the image space. One is in front, the other is behind the focal plane. The photodetectors convert the light intensity signals originating from the sample into two electric signals, and their difference is proportional to the amount of defocus. Using a precalibrated curve between the differential voltage signal and the amount of defocus, the actual distance of the current sample from the focal plane can be measured in real time. The sign of the differential signal determines the direction of defocus, i.e., before or behind the focal plane. The sign and magnitude of the differential signal is used to control the direction and number of steps of a motor, which drives the carriage to move toward the focal plane and bring the sample into sharp focus, realizing the on-line automatic focusing of the microscope. The results of experiments show that the system can achieve efficient and stable automatic focusing. Under 40X objective lens, the effective working range of the proposed method is ±40um.Within this working range, the time required to achieve auto-focusing is 0.90702s, with the majority time, i.e., 0.907s spent on mechanical movement while 0.02ms for sensing the defocus. The major advantage of the proposed method is its high efficiency defocusing sensing at an updating frequency of 50k Hz. Further, it is easy to implement and with a low cost. Therefore, it is reasonable to expect that the proposed autofocusing method would have wide applications include classroom teaching, laboratory microscopic imaging, and inline product quality inspection. Introduction In the fields of optical microscopic imaging as well as other precision optical instruments, autofocus method is essential to improve the scanning efficiency while maintaining high imaging quality of samples. At present, existing microscope autofocus methods can be broadly classified into two categories: pure image processing autofocusing methods and defocusing amount detection methods [1, 2]. The former category includes depth from focus (DFF) and depth from defocus (DFD) method. The depth of focus method achieves autofocus by searching the extreme values of the focus evaluation curve of a series of out-of-focus images. The key is to select the image sharpness evaluation function and the focus search algorithm. Ren Si gang et al. [3] proposed the sum of the absolute values of the grayscale differences of the image as the in-focus evaluation function, and adopted the hill climbing search strategy to improve the focusing efficiency, The system repeatability is up to 8um, and the precision is high but the speed is relatively slow. The defocus depth method uses the establish","PeriodicalId":358224,"journal":{"name":"Proceedings of the 2nd International Conference on Electrical and Electronic Engineering (EEE 2019)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130101256","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Three-phase Four-wire Photovoltaic System with Power Quality Condition Function 具有电能质量条件函数的三相四线制光伏系统
Qingling Pi, Changbing Zhang
{"title":"Three-phase Four-wire Photovoltaic System with Power Quality Condition Function","authors":"Qingling Pi, Changbing Zhang","doi":"10.2991/EEE-19.2019.12","DOIUrl":"https://doi.org/10.2991/EEE-19.2019.12","url":null,"abstract":"Abstract. In this paper, a novel three-phase four-wire photovoltaic system is proposed for the compensation of harmonic, reactive and three-phase unbalance in the distribution network and the demand for renewable energy generation. A novel three-level DC/DC converter is adopted for photovoltaic arrays and energy storage, and its control method, modulation strategy and neutral-point potential imbalance suppression method are given. Three-phase four-wire diode-clamped three-level converter is adopted for the bidirectional grid-connected converter. In order to realize power quality condition and active power bidirectional flow, an improved reference current calculation method is proposed, and the grid-connected current tracking control method is analyzed. Based on the theoretical analysis, the photovoltaic system is modeled and simulated by MATLAB/Simulink, which verified the feasibility and validity of the novel scheme.","PeriodicalId":358224,"journal":{"name":"Proceedings of the 2nd International Conference on Electrical and Electronic Engineering (EEE 2019)","volume":"18 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128879421","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Oil-water Composite Cooling Method of Hub Motor for Electric Vehicles 电动汽车轮毂电机油水复合冷却方法研究
Cheng-ning Zhang, Fu-lai Guo, Yu-gang Dong
{"title":"Oil-water Composite Cooling Method of Hub Motor for Electric Vehicles","authors":"Cheng-ning Zhang, Fu-lai Guo, Yu-gang Dong","doi":"10.2991/EEE-19.2019.21","DOIUrl":"https://doi.org/10.2991/EEE-19.2019.21","url":null,"abstract":"Hub motor has poor heat dissipation conditions limited by the installation space and working environment, high temperature rise in the process of operation has been a bottleneck to further improve the power density and torque density. The increase of power density means the increase of motor loss density and the acceleration of motor temperature rise, which will accelerate the aging of internal insulation materials and reduce the reliability of the motor to a certain extent. The cooling effect of traditional water jacket cooling is limited, and it cannot meet the cooling requirements of hub motor more and more. Taking hub motor for special vehicle as the research object, the cooling structure of rotor oil cooling and compound water jacket cooling are designed. The heat inside the motor is mainly carried away by the lubricating oil and water in the form of heat conduction and convection heat transfer. ANSYS software was used to build a 3d model of the motor, to simulate the temperature field of the motor, and to analyze the temperature distribution inside the motor under different working conditions. The low-speed high-torque, one-hour temperature rise test of the motor prototype was carried out on a bench built in the laboratory, and the test results were compared with the simulation results of the temperature field, showing a good consistency, which verified the rationality of the model. Introduction In the traditional oil cooling method, the stator and rotor of the motor are immersed in the cooling oil, and the cooling effect is good[1]. However, the cooling oil has to pass through the blade agitation, resulting in a large energy loss at high speed. With the in-depth research of oil-cooling mode, there are more and more new oil-cooling structures in the motor[2]. Li ye[3] separated the stator and rotor of the motor with the ultra-thin casing made of glass fiber, and cooled the end winding directly by the cooling oil in the sleeve, which reduced the average temperature of the motor by 40%.Robert Camilleric Presents a thermal fluid flow model is used to predict temperature and flow distribution of the oil cooled motor directly[4], establishes the numerical model to predict the motor section stator temperature distribution, identify hotspots and its location, and makes the hot spot temperature reduces the 13 °through improving the motor stator flow geometry. The error was within 6% compared with the experimental results through measuring the 1/4 model of the stator. Pia M. Lindh[5] took the double stator permanent magnet synchronous motor with 100 kw as the research object, setting up a stainless steel coolant pipes for cooling. Through the research found that direct cooling reduced the temperature about 50°C than indirect cooling method. Motor losses are mainly concentrated in the windings and core, so it is necessary to design the cooling structure to make the oil as close as possible to the heat source to achieve better cooling effect[6]. The a","PeriodicalId":358224,"journal":{"name":"Proceedings of the 2nd International Conference on Electrical and Electronic Engineering (EEE 2019)","volume":"39 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127868538","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
Research on the Optimizing Technology for Sparse Antenna Arrays Based on Aperture Function 基于孔径函数的稀疏天线阵优化技术研究
L. Zhao
{"title":"Research on the Optimizing Technology for Sparse Antenna Arrays Based on Aperture Function","authors":"L. Zhao","doi":"10.2991/EEE-19.2019.44","DOIUrl":"https://doi.org/10.2991/EEE-19.2019.44","url":null,"abstract":"","PeriodicalId":358224,"journal":{"name":"Proceedings of the 2nd International Conference on Electrical and Electronic Engineering (EEE 2019)","volume":"322 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127328262","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Simulation Analysis of Crosstalk of Complex Cable Beams in High Speed EMUs 高速动车组复杂电缆梁串扰仿真分析
Jin-wu Song
{"title":"Simulation Analysis of Crosstalk of Complex Cable Beams in High Speed EMUs","authors":"Jin-wu Song","doi":"10.2991/EEE-19.2019.37","DOIUrl":"https://doi.org/10.2991/EEE-19.2019.37","url":null,"abstract":"Based on the cable transmission line simulation method, crosstalk simulation analysis is performed on complex cable harnesses commonly used in high-speed EMUs such as power cables, DC power cables, communication cables and signal cables. Through the simulation operation, the waveform and amplitude of the crosstalk signal on the victim cable under different types of interference cables are analyzed. It is concluded that the crosstalk of the power cable to other types of cables is particularly obvious. By changing the parameters of interference signal frequency, cable spacing and cable length, the influence of the above parameters on the crosstalk of complex cable bundles is studied. The research results of cable crosstalk are analyzed and summarized, which can be used for wiring and design of complex cables in practical engineering. Introduction With the increasing application of high-speed EMUs, in order to ensure the safe operation of high-speed EMUs, the electromagnetic compatibility of EMU equipment systems has become more and more prominent. For high-speed EMUs, a large number of different types of complex cable bundles, such as power cables, control cables, and signal communication cables, are distributed in a limited space. The crosstalk analysis between cables has become an important part of the electromagnetic compatibility analysis of high-speed EMUs. Research Status At present, some scholars have studied the crosstalk of single-source and dual-source injected into one end of the cable, and obtained the waveform of the induced current [1]. Some scholars have analyzed and optimized the crosstalk of EMU cables and harnesses [2]. Some scholars have studied the electromagnetic interference problem of idle EMUs caused by crosstalk between lines, and optimized the wiring of high-speed EMUs [3, 4]. Some scholars have extended the basic theory of transmission lines for the coupling problem of EMU high-voltage cables and sensor cables, and established a crosstalk theoretical model for two commonly used shielded cables [5]. On the basis of the cable layout design of the EMU traction converter and the electrical component arrangement of the main circuit, some scholars analyzed the influence of the internal electromagnetic compatibility of the traction converter due to the components and the wiring harness, especially the problem of the electromagnetic compatibility of the cable [6]. In summary, at home and abroad, the research on cable crosstalk of EMUs mainly involves crosstalk between power cables, and less research on other types of cable crosstalk. In this paper, the crosstalk of complex cables of EMUs is studied in detail and in-depth. The research results can be used to guide the wiring and laying of complex cable bundles in practical engineering. Cable Transmission Line Simulation Method The cable simulation software performs electromagnetic simulation calculation on the cable based on the transmission line theory. The simulation steps are a","PeriodicalId":358224,"journal":{"name":"Proceedings of the 2nd International Conference on Electrical and Electronic Engineering (EEE 2019)","volume":"82 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130609630","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
An Improved Compression Layer Network Structure for VLPR VLPR压缩层网络结构的改进
Wen-Xuan Wu
{"title":"An Improved Compression Layer Network Structure for VLPR","authors":"Wen-Xuan Wu","doi":"10.2991/EEE-19.2019.42","DOIUrl":"https://doi.org/10.2991/EEE-19.2019.42","url":null,"abstract":"License plate recognition is widely used in road conditions, parking, dredging traffic, etc. The license plate recognition first needs to find the specific location of the license plate and then needs to identify the content of the license plate as an image. During practical applications, main challenges of this recognition technology include the background color, size and specifications of the license plate, weather conditions, background interference, lighting, etc., which may also interfere with license plate recognition. Therefore, complex scenes and moving vehicles are two factors that need to be taken seriously. We propose an improved compression layer network structure for license plate recognition. The main way is to use a parallel structure of the compression layer network connection to alleviate errors caused by illumination, tilt and occlusion in license plate recognition. For reduce the amount of computation often pointed out in the CNN, we have tried to discard some of the parameters. Experiments have shown that this method has a lower error rate than CNN and capsule baseline, also has more advantageous in terms of time consumption. Introduction License plate recognition is an artificial intelligence technology that is fully utilized at home and abroad. It is widely used in automotive related fields such as traffic management, road tolls, ticket sales and charges [1]. The main techniques required for license plate recognition include segmentation, extraction and recognition of image processing techniques associated with license plates and the characters and symbols thereon. The researchers found many different ways to position license plates. For example, vector quantization based is the main scheme of traditional signal coding. In the license plate recognition system, VQ is used as a filter to identify the license plate area in the image as an image composed of certain lines and use the accumulation function to find various maximum values for the detection of the license plate area. Another kind of fuzzy logic algorithm firstly gives the rule and uses two methods of filtering and filtering to carry out vehicle license plate detection. All of these methods still suffer from the dilemma of light and background interference. Color is a feature that is often chosen, but the background interference cannot be eliminated. The edge features may be more suitable in this case. If the edge features can be improved and combined with the above features, it can give more the result of the identification of the value. The combination of edge and shape can be applied to extract the main area of the license plate. Experiments show that these features usually have good recognition performance [2]. Gradient and its variance are often used to identify, the main principle is that the brightness of the image in these areas is more obvious and rapid mutation. If the poor condition of illumination, occlusion, etc. interferes with the license plate, if the ","PeriodicalId":358224,"journal":{"name":"Proceedings of the 2nd International Conference on Electrical and Electronic Engineering (EEE 2019)","volume":"2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132259944","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书