Revista Tecnologías en Procesos Industriales最新文献

Power quality analysis in Durango’s sewage treatment plant 杜兰戈污水处理厂电能质量分析

Revista Tecnologías en Procesos Industriales Pub Date : 2022-12-31 DOI: 10.35429/jtip.2022.15.6.25.30

David Alejandro Sifuentes-Godoy

{"title":"Power quality analysis in Durango’s sewage treatment plant","authors":"David Alejandro Sifuentes-Godoy","doi":"10.35429/jtip.2022.15.6.25.30","DOIUrl":"https://doi.org/10.35429/jtip.2022.15.6.25.30","url":null,"abstract":"This energy study is developed within a wastewater treatment plant by aerated lagoons, where a series of problems such as activation of temperature protections, phase loss and thermal protections are presented. When analyzing the electrical installation and the constitution of each motor, the hypothesis of a possible presence of harmonics outside the established ranges that are producing distortion and increase of the voltage and current signal, as well as a possible resonance, was raised. For this reason, it is intended to carry out an Electrical energy quality analysis in electrical machines of the PTAR de Aguas del Municipio de Durango, through specialized equipment and based on international standards. The power quality analysis contemplates the analysis of: voltage, current, individual harmonic content, THDv, THDi. The methodology proposed by Dugan, McGranaghan, Santoso, & Beaty (2004) and the performance of energy diagnoses according to what was established by Sifuentes et al (2016) were used. As a result, the confirmation of the hypothesis is obtained where the motor that contains power electronics is a source of harmonics that are amplified by the capacitor bank.","PeriodicalId":339921,"journal":{"name":"Revista Tecnologías en Procesos Industriales","volume":"54 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126332495","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

CAD-CAE-CAM technology in the manufacture of a 3-jaw independent chuck prototype in acrylic CAD-CAE-CAM技术在三爪独立卡盘原型制造中的应用

Revista Tecnologías en Procesos Industriales Pub Date : 2022-12-31 DOI: 10.35429/jtip.2022.15.6.1.11

Amando Rivas Rodriguez, Juan Miguel Becerra-Castro, Abel Israel Tristán-Calleja, Esteban Vazquez-Sánchez

{"title":"CAD-CAE-CAM technology in the manufacture of a 3-jaw independent chuck prototype in acrylic","authors":"Amando Rivas Rodriguez, Juan Miguel Becerra-Castro, Abel Israel Tristán-Calleja, Esteban Vazquez-Sánchez","doi":"10.35429/jtip.2022.15.6.1.11","DOIUrl":"https://doi.org/10.35429/jtip.2022.15.6.1.11","url":null,"abstract":"The use and application of CAD, CAE, CAM systems are increasingly necessary in the industry, (Arriaga Segundo, 1999) To meet the needs of the accelerated industrial transformation that is taking place in industrially developed and developing countries, it is essential that those involved in the Mexican metalworking industry. In the technological area, there is a machining center for 4 axes, of which only 3 are used, due to not having a chuck for the 4th axis, which is necessary to manufacture more complex parts, and to prepare future engineers in the use of this technology. For this reason, an acrylic mandrel prototype was designed and manufactured using CAD, CAM and CAE technology. To demonstrate its application and usefulness in the manufacture of complex parts. First, the components that make it up were designed in CAD software: clamps, \"worm\" screw and casing, to later carry out the finite analysis in CAE software, computer-aided engineering, ending with the simulation and manufacturing in CAM software. This will validate and demonstrate the feasibility of manufacturing the mandrel in steel, with existing resources and with a design that best suits the requirements.","PeriodicalId":339921,"journal":{"name":"Revista Tecnologías en Procesos Industriales","volume":"42 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133659919","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Design and construction of a material fastening system for automotive finishing supplies 汽车饰面材料紧固系统的设计与制造

Revista Tecnologías en Procesos Industriales Pub Date : 2022-12-31 DOI: 10.35429/jtip.2022.15.6.12.17

Néstor Flores-Ramirez, Irma Martínez-Carrillo, Carlos Juárez-Toledo, Amador Huitrón-Contreras

{"title":"Design and construction of a material fastening system for automotive finishing supplies","authors":"Néstor Flores-Ramirez, Irma Martínez-Carrillo, Carlos Juárez-Toledo, Amador Huitrón-Contreras","doi":"10.35429/jtip.2022.15.6.12.17","DOIUrl":"https://doi.org/10.35429/jtip.2022.15.6.12.17","url":null,"abstract":"The opening of opportunities in the automotive sector, the global market currently forces companies to be more competitive in their daily activities, this requires them to adopt new strategies, tools and techniques, in order to optimization processes, reduce waste, decrease costs, etc. Automation and the use of smart devices in the industrial sector has evolved impressively, due to improving and increasing production, it also allows to produce better quality products without requiring the control of human intervention to be operated. However, today the use of increasingly sophisticated devices not only allows companies to be more competitive, but also contributes to improving their processes by reducing operating times per workstation. It should be noted that through the implementation of automated devices, not only are production processes improved, in the same time it allows workers to carry out their work activities more easily and comfortably, the objective is avoiding errors or line stops. The present project aims to design and propose a system to provide fastening elements and to saving raw materials, reducing downtime and improving workstation ergonomics for workers in an automotive industry, with the aim of improving production processes, but it could be applied in other industrial sector.","PeriodicalId":339921,"journal":{"name":"Revista Tecnologías en Procesos Industriales","volume":"9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131662377","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Methodology for the development of augmented reality applications for the elimination of errors in the interpretation of manufacturing drawings 用于消除制造图纸解释错误的增强现实应用开发方法

Revista Tecnologías en Procesos Industriales Pub Date : 2022-12-31 DOI: 10.35429/jtip.2022.15.6.18.24

Manuel Meraz-Méndez, E. Reynoso-Jardón, Guadalupe Corral-Ramírez

{"title":"Methodology for the development of augmented reality applications for the elimination of errors in the interpretation of manufacturing drawings","authors":"Manuel Meraz-Méndez, E. Reynoso-Jardón, Guadalupe Corral-Ramírez","doi":"10.35429/jtip.2022.15.6.18.24","DOIUrl":"https://doi.org/10.35429/jtip.2022.15.6.18.24","url":null,"abstract":"Nowadays, precision machining processes have been widely used in the manufacture of products mainly focused on aerospace, automotive, mold manufacturing and various types of products that demand high production volumes, precision and surface quality. However, these manufacturing processes are not exempt from errors and failures during the machining process. Recent studies found that the main errors are due to the interpretation of the information in the manufacturing drawings due to lack of experience or training of the personnel. This research project aims to eliminate errors due to misinterpretation of information in Computer Numerical Control (CNC) machining processes through the implementation of a methodology to develop Augmented Reality (AR) applications for the interpretation of manufacturing drawings. Its main contribution is to provide virtual support to the operating personnel obtaining multiple benefits such as reducing downtime due to failures in the machining process, ensuring the optimal operation of the machines, avoiding collisions of the tools and ensuring the quality of the products.","PeriodicalId":339921,"journal":{"name":"Revista Tecnologías en Procesos Industriales","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117311308","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Didactic prototype of a robotic manufacturing cell to program welding trajectories in a frame 机器人制造单元的教学原型，用于在框架中编程焊接轨迹

Revista Tecnologías en Procesos Industriales Pub Date : 2022-06-30 DOI: 10.35429/jtip.2022.14.6.15.21

Arturo Mandujano-Nava, Mauro Paz-Cabrera, Tomás Serrano-Ramírez, Jesús Chihuaque-Álcantar

{"title":"Didactic prototype of a robotic manufacturing cell to program welding trajectories in a frame","authors":"Arturo Mandujano-Nava, Mauro Paz-Cabrera, Tomás Serrano-Ramírez, Jesús Chihuaque-Álcantar","doi":"10.35429/jtip.2022.14.6.15.21","DOIUrl":"https://doi.org/10.35429/jtip.2022.14.6.15.21","url":null,"abstract":"This project shows the integration of a didactic prototype of a robotic manufacturing cell for the programming of welding trajectories in a chassis. The purpose of this project is to integrate the robotic cell through the interaction of the controller of an industrial robot, a programmable logic controller (PLC) and a power transmission system for the positioning of a chassis for didactic purposes for students studying engineering in the area of Industrial Automation. To carry out the project, a scale chassis for a tractor and its support base was first manufactured, then the control of a stepper motor was carried out through a SIMATIC S7-1200 CPU 1214C PLC and a microstep driver module. The programming software COSIMIR from FESTO was also used to program the welding trajectories in a Mitsubishi RV-2AJ robot with 5 degrees of freedom that interacts with the PLC through input and output digital modules. Finally, it was possible to obtain a functional prototype of a robotic manufacturing cell that can be used for teaching robot trajectory programming and that is closely related to industrial machines.","PeriodicalId":339921,"journal":{"name":"Revista Tecnologías en Procesos Industriales","volume":"151 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116524689","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Spur gear manufacturing using conventional machine tools 使用传统机床制造正齿轮

Revista Tecnologías en Procesos Industriales Pub Date : 2022-06-30 DOI: 10.35429/jtip.2022.14.6.10.14

A. Delgado-Hernandez, B. González-Vizcarra, M. Siqueiros-Hernandez, M. Ávila-Puc

引用次数: 0

Ultrasonic detector for predictive maintenance 用于预测性维护的超声波探测仪

Revista Tecnologías en Procesos Industriales Pub Date : 2022-06-30 DOI: 10.35429/jtip.2022.14.6.1.9

Jorge Duarte-Loera, E. Reynoso-Jardón, Abelardo Díaz-Rivera, David Daniel Arámbula-Ledezma

引用次数: 0

Design and construction of pressure leak testers through the analysis of the filling level for the detection of defects in the nozzle of plastic containers 通过对塑料容器喷嘴的灌装液位分析，设计并施工了压力泄漏测试仪，用于检测塑料容器喷嘴的缺陷

Revista Tecnologías en Procesos Industriales Pub Date : 2022-06-30 DOI: 10.35429/jtip.2022.14.6.22.27

José David Mendoza-Olivares, Irma Martínez-Carrillo, Carlos Juárez-Toledo, Emilio Barocio-Espejo

引用次数: 0

Design and Automation of a vertical electrospinning system for manufacturing nanofibers 纳米纤维垂直静电纺丝系统的设计与自动化

Revista Tecnologías en Procesos Industriales Pub Date : 2021-12-31 DOI: 10.35429/jtip.2021.13.5.8.15

J. Rosales-Davalos, Ma. Angeles Enríquez-Pérez, Roberto López-Ramírez, J. E. Mastache-Mastache

{"title":"Design and Automation of a vertical electrospinning system for manufacturing nanofibers","authors":"J. Rosales-Davalos, Ma. Angeles Enríquez-Pérez, Roberto López-Ramírez, J. E. Mastache-Mastache","doi":"10.35429/jtip.2021.13.5.8.15","DOIUrl":"https://doi.org/10.35429/jtip.2021.13.5.8.15","url":null,"abstract":"The objective of this research consists of the design, construction and automation of the electrospinning mechatronic system to obtain nanofibers. As a first stage, the structure of the electrospinning mechatronic system and the distribution, injection and manifold system were designed and built. In the second stage, the open-loop control system was outlined and implemented. It is made up of: control, isolation stage, and the plant. In the first element, the LabView interface and ATMega2560 microcontroller were used to manipulate the variables of the injection speed and distribution of the solution, the speed of the nanofiber collector and the height between the capillary tube and the collector, the magnitude of the temperature and humidity from the environment, also, the graphic interface was developed, the second element consists of isolating the control and power stage in addition to amplifying the command signals and enabling the correction elements, the third element receiving the signals from the power stage to perform the action and produce a change in the controlled variables in the process. With this prototype, it is intended to obtain nanofibers from different polymer solutions for use in the area of catalysis and biomaterials.","PeriodicalId":339921,"journal":{"name":"Revista Tecnologías en Procesos Industriales","volume":"47 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117242629","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Kinetics, modeling and colorimetry of celery leaves dehydration by direct and mixed solar drying 芹菜叶直接和混合日光干燥脱水动力学、模型和比色法

Revista Tecnologías en Procesos Industriales Pub Date : 2021-12-31 DOI: 10.35429/jtip.2021.13.5.22.28

B. Castillo‐Téllez, M. Castillo-Téllez, G. A. Mejía-Pérez, Carlos Jesahel Vega Gómez

{"title":"Kinetics, modeling and colorimetry of celery leaves dehydration by direct and mixed solar drying","authors":"B. Castillo‐Téllez, M. Castillo-Téllez, G. A. Mejía-Pérez, Carlos Jesahel Vega Gómez","doi":"10.35429/jtip.2021.13.5.22.28","DOIUrl":"https://doi.org/10.35429/jtip.2021.13.5.22.28","url":null,"abstract":"In celery, leaves, roots, and fruit contain a high value in medicinal properties and are used to prepare syrups, tinctures, infusions, or oils; however, its leaves are commonly discarded, wasting their nutritional and medicinal content. The dehydration of these leaves is a conservation option, increasing their shelf life. This study analyzes direct and mixed solar drying (SD and SM) kinetics and their effect on celery leaves. The moisture contents, drying rate, water activity, and colorimetry were obtained. Moreover, the fitting of experimental data to the mathematical models proposed in the literature. The moisture content stabilized at 150 min in the SM at the shortest time with a maximum drying rate of 0.1179 g∙water/g∙ dm∙min. The initial and final water activity was 0.98 and 0.412 in the SM and 0.403 in the SD. The SD better conserved the leaf color, with a total color change (ΔE) of 2.56, while the value obtained with the SM was 5.42. The experimental results of both technologies were better adjusted to the model Two exponential terms with an R² of 0.999. The results show that the solar drying of the celery leaves is feasible, and a quality product is obtained sustainably.","PeriodicalId":339921,"journal":{"name":"Revista Tecnologías en Procesos Industriales","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127445435","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0