IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002.最新文献

筛选
英文 中文
Energy sources for the world's post-petroleum era 世界后石油时代的能源来源
IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002. Pub Date : 2003-11-01 DOI: 10.1109/MAES.2004.1269686
H. Oman
{"title":"Energy sources for the world's post-petroleum era","authors":"H. Oman","doi":"10.1109/MAES.2004.1269686","DOIUrl":"https://doi.org/10.1109/MAES.2004.1269686","url":null,"abstract":"America consumes petroleum products at the rate of 18 barrels per year per person. Predicted for the year 2025 is a world population of 9.1 trillion persons. If their standard of living has advanced to that enjoyed by Americans today, then their 18-barrel-a-day per person oil consumption will have exhausted the world's oil resources. Energy conservation and development of alternative energy sources will be needed. Farm-grown fuel, such as ethyl alcohol and forest-grown pulp would not be available because all arable land will be needed for food production. Heat energy rising from the Earth's core can be captured with water circulated through deep wells. Solar energy can be captured with high-efficiency solar cells, but a 50-story apartment building roof can't intercept enough solar energy to power the residents' 24-hours-a-day, 365-days-a-year needs. Combined-cycle nuclear power plants can supply heat energy to nearby factories and buildings. Transportation is our big energy consumer. The Queen Mary burned a barrel of oil per mile traveled. A cruise ship towed by a nuclear-powered submarine requires no propulsion power. The ultimate water-travel efficiency would be based on the hydrodynamics of a dolphin that can swim 3000 miles on food that contains the energy in one gallon of gasoline. No petroleum is needed for land travel if the propulsion power is supplied by fuel cells consuming hydrogen, zinc, or aluminium. Their waste products can be electrolyzed into storable fuel with solar power. An ultimate vehicle for land travel is a streamlined electric bicycle that consumes only 100 watthours per mile. These and other options for achieving the coming need for reducing petroleum consumption are quantitatively evaluated.","PeriodicalId":330333,"journal":{"name":"IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002.","volume":"187 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2003-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121065576","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 17
Implementation of magnetohydrodynamic energy bypass process for hypersonic vehicles 高超声速飞行器磁流体动力能量旁路过程的实现
IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002. Pub Date : 2003-09-29 DOI: 10.1109/IECEC.2002.1391979
Ying-Ming Lee, P. Czysz, D. Petley
{"title":"Implementation of magnetohydrodynamic energy bypass process for hypersonic vehicles","authors":"Ying-Ming Lee, P. Czysz, D. Petley","doi":"10.1109/IECEC.2002.1391979","DOIUrl":"https://doi.org/10.1109/IECEC.2002.1391979","url":null,"abstract":"The global political structure has changed dramatically since die breakup of the former Soviet Union. World changes have caused the U.S. to reprioritize its national hypersonic needs. The United States government has looked the need of the future, and hypersonic aerospace plane is one of the systems included in alternative force structures. One of the hypersonic aerospace plane concepts would involve magnetohydrodynamic (MHD) technology, or the AJAX hypersonic flight vehicle concept, originally proposed by Russian scientist Vladimir Fraishtadt. This paper is to report the performance analysis results for an air-breathing horizontal take-off and landing design concept using an MHD energy bypass injector ramjet engine. Quasi one-dimensional electromagnetic code with new Scramjct model and other tools were used to examine the total system performance. Both cruiser and space launch propulsion configurations have been investigated. Additional fuel reforming and magnet design information will also be discussed. The overall operational concept was examined to determine the overall cost effectiveness.","PeriodicalId":330333,"journal":{"name":"IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002.","volume":"35 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2003-09-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126776457","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 3
Oscillatory flow and thermal field measurements at the interface between a heat exchanger and a regenerator of a Stirling engine 斯特林发动机换热器与蓄热器界面处的振荡流场和热场测量
IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002. Pub Date : 2002-12-01 DOI: 10.1109/IECEC.2002.1392095
Y. Niu, T. Simon, M. Ibrahim, D. Gedeon
{"title":"Oscillatory flow and thermal field measurements at the interface between a heat exchanger and a regenerator of a Stirling engine","authors":"Y. Niu, T. Simon, M. Ibrahim, D. Gedeon","doi":"10.1109/IECEC.2002.1392095","DOIUrl":"https://doi.org/10.1109/IECEC.2002.1392095","url":null,"abstract":"A physical model of a stacked-screen Stirling engine regenerator with a porosity of 90% was constructed to be representative of modern free-piston engines. Such a model allows conducting detailed fluid mechanics and thermal measurements and simulating representative entry flow geometry to a regenerator. Present focus is on the flow and thermal fields at the interface between the regenerator matrix and a cooler tubular heat exchanger. Velocity measurements within the plenum between the regenerator and the cooler were taken and similarities with previous measurements of oscillatory flow in a pipe were noted. Fine-wire thermocouples were employed to take unsteady temperature measurements, resolved in space and time within the plenum. Such measurements show thermal dispersion of the jets within the plenum in one half of the cycle and sink flow to the discrete cooler tubes in the other half of the cycle. When the program is completed, measurements of thermal spreading will have been taken and the results will indicate the fraction of the matrix material that is participating fully in thermal exchange with the fluid. The present paper introduces the program and presents progress to date. Some focus is given to the secondary flows within the matrix, including flows near the canister wall that are influenced by sealing between the matrix and the canister. All cases are run under conditions characterized by a Valensi number of 14.3 and a maximum Reynolds number of 20700 (the length scale is the cooler tube diameter and the velocity scale is the cycle maximum bulk mean velocity in the cooler tubes).","PeriodicalId":330333,"journal":{"name":"IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002.","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2002-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125662500","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 5
A novel DC/AC boost inverter 一种新型直流/交流升压逆变器
IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002. Pub Date : 2002-12-01 DOI: 10.1109/IECEC.2002.1392119
T. Liang, Jueni-Lung Shyu, Jiann-Fuh Chen
{"title":"A novel DC/AC boost inverter","authors":"T. Liang, Jueni-Lung Shyu, Jiann-Fuh Chen","doi":"10.1109/IECEC.2002.1392119","DOIUrl":"https://doi.org/10.1109/IECEC.2002.1392119","url":null,"abstract":"This work describes a power conversion circuit topology for single-phase DC/AC boost inverter, based on the DC/DC boost converter. It mainly consists of a full-bridge boost converter, which is capable of providing AC output voltage regulation with low distortion. The proposed inverter performs single power conversion, which minimizes switching losses and attains higher efficiency as compared with conventional booster inverter. The steady state operating principle of power circuit topology and control strategy are described. A multiloop structure controller is used and is capable of guaranteeing a high quality dynamic performance. Computer simulations demonstrate the feasibility of the proposed boost inverter.","PeriodicalId":330333,"journal":{"name":"IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002.","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2002-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122735038","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 34
Nanotechnology - enabler of next generation energy storage? 纳米技术——下一代储能技术的推动者?
IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002. Pub Date : 2002-12-01 DOI: 10.1109/IECEC.2002.1392039
G. Amatucci, F. Badway
{"title":"Nanotechnology - enabler of next generation energy storage?","authors":"G. Amatucci, F. Badway","doi":"10.1109/IECEC.2002.1392039","DOIUrl":"https://doi.org/10.1109/IECEC.2002.1392039","url":null,"abstract":"Nanotechnology has been receiving significant exposure regarding its potential to offer evolutionary advancements in a wide breadth of applications. We explore the avenues which we believe nanotechnology holds much promise for the nonevolutionary advancement in energy storage technology, specifically such technologies utilizing ion insertion processes such as Li battery technology.","PeriodicalId":330333,"journal":{"name":"IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002.","volume":"50 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2002-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132015129","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
A 2-D CFD model of oscillatory flow with jets impinging on a random wire regenerator matrix 射流冲击随机导线蓄热器矩阵振荡流的二维CFD模型
IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002. Pub Date : 2002-12-01 DOI: 10.1109/IECEC.2002.1392096
M. Ibrahim, Zhiguo Zhang, Rong Wei, Terrence W. Simon, D. Gedeon
{"title":"A 2-D CFD model of oscillatory flow with jets impinging on a random wire regenerator matrix","authors":"M. Ibrahim, Zhiguo Zhang, Rong Wei, Terrence W. Simon, D. Gedeon","doi":"10.1109/IECEC.2002.1392096","DOIUrl":"https://doi.org/10.1109/IECEC.2002.1392096","url":null,"abstract":"This work describes the CFD portion of an overall plan to examine a modern type of Stirling engine regenerator matrix both computationally and experimentally. An experimental program has already started at the University of Minnesota (UMN) to examine a stacked-screen regenerator. A 2-D axisymmetric computational model was developed to simulate the UMN rig encompassing a piston/cylinder, cooler tube, plenum, regenerator matrix and heater. The CFD-ACE+, a commercial CFD-code, has been utilized for this study. A systematic approach was taken where CFD results were obtained for the following: 1) Turbulence modeling (low Re k-/spl epsiv/) of a unidirectional pipe flow with sudden expansion (expansion ratio D/d=1.95). Good agreement was achieved with the experimental data; 2) Laminar flow with porous media for a flow over and through a stack of rectangular parallel plate fins (porosity=0.579 & permeability=2.28E-08 m/sup -2/). Good agreement was achieved with published CFD data; 3) Good agreement was achieved for prediction of the oscillatory velocity field, in the plenum, with the UMN data and without the regenerator matrix where a low Re k-/spl epsiv/ turbulence model was used; 4) Results for the oscillatory flow data with the regenerator matrix in place showed that the laminar flow model overpredicted the centerline velocity (as expected), since the flow is turbulent. The laminar flow model with permeability of 1.65E-08 m/sup -2/ seems to show velocity uniformity in the matrix as early as 15 screen-layers deep into the regenerator matrix (from the cooler side). This is consistent with the UMN temperature data. A combined study of a turbulence model and a porous media model is underway to provide accurate data both in the plenum and the regenerator matrix. Our next step is to apply this model and include the energy equation to predict not only velocity but also temperature profiles as well.","PeriodicalId":330333,"journal":{"name":"IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002.","volume":"559 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2002-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132480634","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 10
A 2-D axisymmetric CFD model of oscillatory flow with separation 含分离振荡流动的二维轴对称CFD模型
IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002. Pub Date : 2002-12-01 DOI: 10.1109/IECEC.2002.1392103
M. Ibrahim, Z. Zhang, S. Kembhavi, T. Simon, D. Gedeon
{"title":"A 2-D axisymmetric CFD model of oscillatory flow with separation","authors":"M. Ibrahim, Z. Zhang, S. Kembhavi, T. Simon, D. Gedeon","doi":"10.1109/IECEC.2002.1392103","DOIUrl":"https://doi.org/10.1109/IECEC.2002.1392103","url":null,"abstract":"A 2-D axisymmetric computational model was developed to simulate a UMN test rig and encompassing: a piston/cylinder and 90 degree flow turn to a radial flow between two discs. Three cases were studied representing a combination of two disc spacings (54 & 127 mm) and two oscillating frequencies (30 & 70 CPM). The CFD-ACE+ commercial CFD code was utilized for this study. Both laminar and turbulent simulations were attempted. The CFD code was validated by comparing with experimental data for a unidirectional jet impinging on a flat plate. The agreement was good. The laminar and turbulent flow cases mimic closely the flow visualization obtained in the UMN rig. The CFD simulations for the three oscillatory flow cases revealed close similarity of flow features. However, distinct differences were noticed, in both computations and experiments, between small and large disc spacing in the channel. The small channel shows the presence of vortices only in a portion of the cycle. The large channel shows a large vortex throughout the whole cycle. This vortex gets stronger during jetting into the disc space (exhaust stroke) and weaker during suction into the cylinder.","PeriodicalId":330333,"journal":{"name":"IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002.","volume":"2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2002-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130934648","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 10
Multijunction thin-film solar cells on flexible substrates for space power 用于空间发电的柔性基板多结薄膜太阳能电池
IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002. Pub Date : 2002-10-01 DOI: 10.1109/IECEC.2002.1392007
A. Hepp
{"title":"Multijunction thin-film solar cells on flexible substrates for space power","authors":"A. Hepp","doi":"10.1109/IECEC.2002.1392007","DOIUrl":"https://doi.org/10.1109/IECEC.2002.1392007","url":null,"abstract":"Photovoltaic arrays have played a key role in power generation in space. The current technology will continue to evolve but is limited in the important mass specific power metric (MSP or power/weight ratio) because it is based on bulk crystal technology. Solar cells based on thin-film materials offer the promise of much higher MSP and much lower cost. However, for space applications, a 20% or greater AM0 efficiency (/spl eta/) is required. The leading thin-film materials, amorphous Si, CuInSe/sub 2/ and CdTe have seen significant advances in efficiency over the last decade but will not achieve the required efficiency in the near future. Several new technologies are herein described to maximize both device /spl eta/ and MSP. One novel approach involves the use of very lightweight flexible substrates such as Kapton/sup /spl trade// and metal foil. Recently, prototype devices of thin-film materials have been fabricated on these substrates. We describe our efforts to enable this advance including materials processing and device fabrication and characterization on both polymer and metal foil substrates. Another approach involves stacking two cells on top of each other. These tandem devices more effectively utilize solar radiation by passing through nonabsorbed longer wavelength light to a narrow-bandgap bottom cell material. AMPS modeling of current devices in tandem format indicate that AM0 efficiencies near 19 % can be achieved. And with improvements in materials, AM0 efficiencies approaching 25% are achievable. Several important technical issues need to be resolved to realize these complex devices: development of a wide bandgap material with good electronic properties, development of transparent contacts, and targeting a 2-terminal device structure (with more complicated processing and tunnel junction) or 4-terminal device.","PeriodicalId":330333,"journal":{"name":"IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002.","volume":"48 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2002-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131488956","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 5
Flywheel magnetic suspension developments 飞轮磁悬浮发展
IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002. Pub Date : 2002-09-01 DOI: 10.1109/IECEC.2002.1391999
A. Palazzolo, A. Kenny, S. Lei, Y. Kim, G. Sun, C. Chon, R. Tucker, J. Preuss, M. Li, T.M.C. Sifford, E. Thomas, M. Bhuiyan, Karthik Ganesan, A. Provenza, A. Kascak, G. Montague
{"title":"Flywheel magnetic suspension developments","authors":"A. Palazzolo, A. Kenny, S. Lei, Y. Kim, G. Sun, C. Chon, R. Tucker, J. Preuss, M. Li, T.M.C. Sifford, E. Thomas, M. Bhuiyan, Karthik Ganesan, A. Provenza, A. Kascak, G. Montague","doi":"10.1109/IECEC.2002.1391999","DOIUrl":"https://doi.org/10.1109/IECEC.2002.1391999","url":null,"abstract":"The authors provide an overview of many areas of the flywheel magnetic suspension (MS) R&D being performed at the Texas A&M Vibration Control and Electromechanics Lab (TAMU-VCEL). This includes system response prediction, actuator optimization and redundancy, controller realizations and stages, sensor enhancements and backup bearing reliability.","PeriodicalId":330333,"journal":{"name":"IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002.","volume":"31 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2002-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116718407","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
Efficient design in a DC to DC converter unit 高效设计的直流到直流转换器单元
IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002. Pub Date : 2002-08-01 DOI: 10.1109/IECEC.2002.1391974
J.E. Bruemmer, F. Williams, G. V. Schmitz
{"title":"Efficient design in a DC to DC converter unit","authors":"J.E. Bruemmer, F. Williams, G. V. Schmitz","doi":"10.1109/IECEC.2002.1391974","DOIUrl":"https://doi.org/10.1109/IECEC.2002.1391974","url":null,"abstract":"Space flight hardware requires high power conversion efficiencies due to limited power availability and weight penalties of cooling systems. The international space station (ISS) electric power system (EPS) DC- DC converter unit (DDCU) power converter is no exception. This paper explores the design methods and tradeoffs that were utilized to accomplish high efficiency in the DDCU. An isolating DC to DC converter was selected for the ISS power system because of requirements for separate primary and secondary grounds and for a well-regulated secondary output voltage derived from a widely varying input voltage. A flyback-current-fed push-pull topology, or improved Weinberg circuit, was chosen for this converter because of its potential for high efficiency and reliability. To enhance efficiency, a nondissipative snubber circuit for the very-low-Rds-on field effect transistors (FET)s was utilized, redistributing the energy that could be wasted during the switching cycle of the power FETs. A unique, low-impedance connection system was utilized to improve contact resistance over a bolted connection. For improved consistency in performance and to lower internal wiring inductance and losses, a planar bus system is employed. All of these choices contributed to the design of a 6.25 KW regulated DC to DC converter that is 95% efficient. The methodology used in the design of this DC to DC converter unit may be directly applicable to other systems that require a conservative approach to efficient power conversion and distribution.","PeriodicalId":330333,"journal":{"name":"IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002.","volume":"43 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2002-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120953892","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 9
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书