ASME Journal of Engineering for Sustainable Buildings and Cities最新文献

{"title":"Potential of Utilizing Thermal Energy Storage Integrated Ground Source Heat Pump System to Reshape Electricity Demand in the United States","authors":"Liangyu Shi, Xiaobing Liu, M. Qu, Guodong Liu, Zhi Li","doi":"10.1115/1.4051992","DOIUrl":"https://doi.org/10.1115/1.4051992","url":null,"abstract":"\u0000 Each year, more than 20% of electricity generated in the United States is consumed for meeting the thermal demands (e.g., space cooling, space heating, and water heating) in residential and commercial buildings. Integrating thermal energy storage (TES) with building’s HVAC systems has the potential to reshape the electric load profile of the building and mitigate the mismatch between the renewable generation and the demand of buildings. A novel ground source heat pump (GSHP) system integrated with underground thermal energy storage (UTES) has been proposed to level the electric demand of buildings while still satisfying their thermal demands. This study assessed the potential impacts of the proposed system with a bottom-up approach. The impacts on the electricity demand in various electricity markets were quantified. The results show that, within the capacity of the existing electric grids, the maximum penetration rate of the proposed system in different wholesale markets could range from 51% to 100%. Overall, about 46 million single-family detached houses can be retrofitted into the proposed system without increasing the annual peak demand of the corresponding markets. By implementing the proposed system at its maximum penetration rate, the grid-level summer peak demand can be reduced by 9.1% to 18.2%. Meanwhile, at the grid level, the annual electricity consumption would change by −12% to 2%. The nationwide total electricity consumption would be reduced by 9%.","PeriodicalId":326594,"journal":{"name":"ASME Journal of Engineering for Sustainable Buildings and Cities","volume":"30 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122091366","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Energy Demand Reduction in the Built Environment Using Shallow Geothermal Integrated Energy Systems—A Comprehensive Review: Part I. Design Consideration of Ground Heat Exchanger","authors":"K. Balaji","doi":"10.1115/1.4052187","DOIUrl":"https://doi.org/10.1115/1.4052187","url":null,"abstract":"\u0000 The research collection aims at finding the various possible opportunities for the effective integration of shallow geothermal energy (SGE) to decrease the energy demand in the built environment and to reduce emission associated with it. The integration of SGE with heat pump using pipe network is extensively reviewed. The open-loop and closed-loop (vertical, horizontal, energy piles) pipe networks are the most common type of ground heat exchanging methods. The objective of the review is to improve the heat exchanger effectiveness through various design aspects according to the local climatic conditions. This comprehensive review part I contains the research details pertaining to the last two decades about ground heat exchangers (geometrical aspects, borehole material, grout material, thermal response test, analytical and numerical models). Also, the factors influencing the ground heat exchanger’s performance such as heat transfer fluid (HTF), groundwater flow, and soil properties are discussed in detail. This paper highlights the recent research findings and potential research points in the ground heat exchanger.","PeriodicalId":326594,"journal":{"name":"ASME Journal of Engineering for Sustainable Buildings and Cities","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127323776","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Special Issue: Electrification of the Building Heating Sector","authors":"K. M. Zhang, Jorge E. González","doi":"10.1115/1.4052220","DOIUrl":"https://doi.org/10.1115/1.4052220","url":null,"abstract":"","PeriodicalId":326594,"journal":{"name":"ASME Journal of Engineering for Sustainable Buildings and Cities","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114350284","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Energy demand reduction in the built environment using shallow geothermal integrated energy systems: Part II – Hybrid ground source heat pump for building heating","authors":"K. Balaji, Vishaldeep Sharma","doi":"10.1115/1.4052215","DOIUrl":"https://doi.org/10.1115/1.4052215","url":null,"abstract":"\u0000 The research collection aims at finding the various possible opportunities for the effective integration of shallow geothermal energy (SGE) to decrease the energy demand in the built environment and to reduce emission associated with it. The direct utilization of SGE using a ground source heat pump (GSHP) has been reviewed in comprehensive review part I and part II. From the extensive review, it is found that the hybrid GSHP is needed to avoid ground thermal imbalance and peak demand. Hybrid GSHP can adopt various supplemental heat sources and sinks according to the local climatic conditions and the balance of energy demands. The primary focus on the integration of subsystems such as biomass, solar energy (PV, PVT, and collector), phase change material, micro gas turbine, and absorption heat pump with GSHP is presented for heating application. This comprehensive review part III highlights the recent research findings and a potential gap in hybrid GSHP for further research and developments","PeriodicalId":326594,"journal":{"name":"ASME Journal of Engineering for Sustainable Buildings and Cities","volume":"24 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125006573","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Cost-Effectiveness and Resiliency Evaluation of Net-Zero Energy U.S. Residential Communities","authors":"Jordan Thompson, M. Krarti","doi":"10.1115/1.4051656","DOIUrl":"https://doi.org/10.1115/1.4051656","url":null,"abstract":"\u0000 In this paper, a resiliency analysis is carried out to assess the energy, economic, and power outage survivability benefits of efficient and net-zero energy communities. The analysis addresses the appropriate steps to designing an energy-efficient and net-zero energy community using Phoenix, Arizona, as a primary location for weather and utility inputs. A baseline home is established using International Energy Conservation Code (IECC) 2018 code requirements. Three occupancy levels are evaluated in BEopt to provide diversity in the community’s building stock. The loads from the baseline, energy-efficient optimum, and net-zero energy optimum single-family homes are utilized to determine energy use profiles for various residential community types using occupancy statistics for Phoenix. Then, REopt is used to determine the photovoltaic (PV) and battery storage system sizes necessary for the community to survive a 72-hour power outage. The analysis results indicated that the baseline community requires a 544-kW PV system and 375-kW/1,564 kWh battery storage system to keep all electrical loads online during a 72-hour power outage. The energy-efficient community requires a 291-kW PV system and a 202-kW/820 kWh battery storage system while the net-zero energy community requires a 291-kW PV system and a 191-kW/880 kWh battery storage system. In this study, the economic analysis indicates that it is 31% more cost-effective to install a shared PV plus storage system than to install individual PV plus storage systems in an energy-efficient community. After analyzing the system sizes and costs required to survive various outage durations, it is found that only a 4% difference in net present cost exists between a system sized for a 24-hour outage and a 144-hour outage. In the event of a pandemic or an event that causes a community-wide lockdown, the energy-efficient community would only survive 6 h out of a 72-hour power outage during a time where plug loads are increased by 50% due to added laptops, monitors, and other office electronics. Finally, a climate sensitivity analysis is conducted for efficient communities in Naperville, Illinois, and Augusta, Maine. The analysis suggests that for a 72-hour power outage starting on the peak demand day and time of the year, the cost of resiliency is higher in climates with more heating and cooling needs as heating, ventilation, air conditioning, and cooling (HVAC) is consistently the largest load in a residential building.","PeriodicalId":326594,"journal":{"name":"ASME Journal of Engineering for Sustainable Buildings and Cities","volume":"10 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130976913","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Sustainable Energy Solutions for Thermal Load in Buildings—Role of Heat Pumps, Solar Thermal, and Hydrogen-Based Cogeneration Systems","authors":"P. Cheekatamarla, Vishaldeep Sharma, B. Shen","doi":"10.1115/1.4051881","DOIUrl":"https://doi.org/10.1115/1.4051881","url":null,"abstract":"\u0000 Economic and population growth is leading to increased energy demand across all sectors—buildings, transportation, and industry. Adoption of new energy consumers such as electric vehicles could further increase this growth. Sensible utilization of clean renewable energy resources is necessary to sustain this growth. Thermal needs in a building pose a significant challenge to the energy infrastructure. Potential technological solutions to address growing energy demand while simultaneously lowering the carbon footprint and enhancing the grid flexibility are presented in this study. Performance assessment of heat pumps, solar thermal collectors, nonfossil fuel-based cogeneration systems, and their hybrid configurations is reported in this study. The impact of design configuration, coefficient of performance (COP), electric grid’s primary energy efficiency on the key attributes of total carbon footprint, life cycle costs, operational energy savings, and site-specific primary energy efficiency are analyzed and discussed in detail. Heat pumps and hydrogen-fueled solid oxide fuel cells (SOFCs) are highly effective building energy resources compared to traditional approaches; however, the carbon intensity of electrical energy and hydrogen production are keys to the overall environmental benefit.","PeriodicalId":326594,"journal":{"name":"ASME Journal of Engineering for Sustainable Buildings and Cities","volume":"223 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132888475","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Model of a System-Wide Domestic Hot-Water Distribution System in a Multi-Resident High-Rise Building","authors":"M. Vratonjic, A. Rahmatmand, Feras Marish, P. Sullivan","doi":"10.1115/1.4049799","DOIUrl":"https://doi.org/10.1115/1.4049799","url":null,"abstract":"\u0000 To reduce the environmental impact and cost, energy and water consumption of multi-resident buildings should be improved while ensuring resident comfort. Inefficient mixing of hot and cold-water streams and a non-optimal domestic hot-water (DHW) distribution system design can cause higher energy consumption, component failures, and dissatisfied residents. An OpenModelica (OM) system-wide model of a 14-story building consisting of a controlled-loop injection (CLI) device and a DHW distribution system is presented. The OM results are validated against field measurements at discreet locations within a single-zone closed-loop circuit to ensure the validity of time-varying temperature and flowrate. The study demonstrates that OM is a useful engineering tool to model single and multi-zone high-rise buildings that allows advanced analysis, including system-wide optimization, advanced on-demand controls, and energy and water-usage efficiencies.","PeriodicalId":326594,"journal":{"name":"ASME Journal of Engineering for Sustainable Buildings and Cities","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130181545","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Reflecting on Impacts of COVID19 on Sustainable Buildings and Cities","authors":"Jorge E. González, M. Krarti","doi":"10.1115/1.4050374","DOIUrl":"https://doi.org/10.1115/1.4050374","url":null,"abstract":"The pandemic of Coronavirus Disease or COVID19 has disrupted all aspects of our lives in many ways since it was first detected in the early part of the year 2020; personal and professional lives were impacted including workplaces, learning environments, businesses, commerce, and industry. The global toll of impacted people has been higher than many anticipated, with more than 100 M confirmed infections as of this issue and more than 2.5 M of confirmed casualties [1]. To a large degree, buildings are at the center of the pandemic in terms of spread and its control. The severe acute respiratory syndrome coronavirus 2 (SARS CoV-2) virus spreads rapidly from person to person as the main contamination source presenting major challenges for human socializations and interactions, which occur mostly in indoor environments. Thus, indoor environments are a potential opportunity to reduce infection or to increase risk, if not properly ventilated. At the center of indoor environments are mechanical systems that control temperature and humidity levels, and ventilation rates, all requiring electrical energy to operate. The sudden shift from normal life to lockdowns and the associated reduced economic activities across the world have had unintended consequences to the use of buildings, where people tended to spend longer periods to conduct their daily personal and professional routines. This complex situation that places buildings at the center of human activities raises many questions about our state of knowledge and technology to face these extraordinary challenges presented by global pandemics; what should be the preparedness to properly manage indoor environments? How the energy infrastructure is copingwith these challenges, how energy should be used tomaintain proper indoor environments, and prolonged lockdown states? What are the impacts of extended stays in indoor environments on human health? What are the impacts on social equity and demographics? How pandemics may influence our future buildings’ science and design practices? These are some of the many questions that may need to be answered by buildings scientists and engineers. To reflect on these complex questions and to forge a forward agenda for our scientific and engineering community, a group of colleagues organized an initial open conversation at the ASME 2020 Energy Sustainability Conference, held virtually for the first time, this past month of June 2020. Prof. Max Zhang of Cornell University, and Dr. Kishor Khankari, ASHRAE Fellow President and Owner at AnSight LLC, joined the JESBC’s Chief Editors, to reflect on specific and broad topics that included the following: (a) impacts of COVID19 on mechanical systems for indoor environments, (b) the role of COVID19 in outdoor environments, (c) how COVID19 has impacted energy demands in buildings with a global perspective, and (d) what maybe the role of COVID19 in social equity. Short summaries of these reflections are given in the following sections","PeriodicalId":326594,"journal":{"name":"ASME Journal of Engineering for Sustainable Buildings and Cities","volume":"104 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-02-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132496305","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Adapting to Extreme Heat: Social, Atmospheric, and Infrastructure Impacts of Air-Conditioning in Megacities—The Case of New York City","authors":"H. Gamarro, L. Ortiz, Jorge E. González","doi":"10.1115/1.4048175","DOIUrl":"https://doi.org/10.1115/1.4048175","url":null,"abstract":"\u0000 Extreme heat events are becoming more frequent and intense. In cities, the urban heat island (UHI) can often intensify extreme heat exposure, presenting a public health challenge across vulnerable populations without access to adaptive measures. Here, we explore the impacts of increasing residential air-conditioning (AC) adoption as one such adaptive measure to extreme heat, with New York City (NYC) as a case study. This study uses AC adoption data from NYC Housing and Vacancy Surveys to study impacts to indoor heat exposure, energy demand, and UHI. The Weather Research and Forecasting (WRF) model, coupled with a multilayer building environment parameterization and building energy model (BEP–BEM), is used to perform this analysis. The BEP–BEM schemes are modified to account for partial AC use and used to analyze current and full AC adoption scenarios. A city-scale case study is performed over the summer months of June–August 2018, which includes three different extreme heat events. Simulation results show good agreement with surface weather stations. We show that increasing AC systems to 100% usage across NYC results in a peak energy demand increase of 20%, while increasing UHI on average by 0.42 °C. Results highlight potential trade-offs in extreme heat adaptation strategies for cities, which may be necessary in the context of increasing extreme heat events.","PeriodicalId":326594,"journal":{"name":"ASME Journal of Engineering for Sustainable Buildings and Cities","volume":"10 7","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114128427","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Projections of Wind Gusts for New York City Under a Changing Climate","authors":"D. Comarazamy, J. Gonzalez-Cruz, Y. Andreopoulos","doi":"10.1115/1.4048059","DOIUrl":"https://doi.org/10.1115/1.4048059","url":null,"abstract":"\u0000 To determine potential changes in the frequency and intensity of future storm events due to climate change in New York City (NYC), a statistical downscaling technique is proposed. First, a historical benchmark was determined using weather station data from the John F. Kennedy (JFK) and La Guardia (LGA) airports for the period 1973–2017. This historical information was used to perform the bias-correction exercise of near-future (2011–2050) global circulation model (GCM) output (ORNL RegCM4; RCP 8.5). Results show that NYC is projected to experience higher wind gusts under a warming climate for the period 2017–2050 in comparison with the historical data period, with the most extreme event projected to produce a maximum wind gust of approximately 110 mph, a significant increase over the past maximum of 80 mph. The historical 700-year return period event was estimated at 115 mph, while the overall 700-year event (historical and projected) is estimated at 124 mph. The most extreme cases of maximum daily wind gusts are projected to occur during the winter and early spring seasons. No increase in the number of projected tropical storms was observed, but the intensity of the storms is projected to be higher than during the historical period. These changes in extreme wind events could have serious implications for NYC in terms of urban planning, potential power outages, transportation disruptions, impacts on building structures, and public safety.","PeriodicalId":326594,"journal":{"name":"ASME Journal of Engineering for Sustainable Buildings and Cities","volume":"29 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126796037","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}