2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)最新文献
Chunjian Tan, Shaogang Wang, Xu Liu, Jing Jiang, Guoqi Zhang, H. Ye
{"title":"High-Voltage and High-Current IGBT Press-pack Module for Power Grid","authors":"Chunjian Tan, Shaogang Wang, Xu Liu, Jing Jiang, Guoqi Zhang, H. Ye","doi":"10.1109/EuroSimE54907.2022.9758878","DOIUrl":"https://doi.org/10.1109/EuroSimE54907.2022.9758878","url":null,"abstract":"On the basis of the development and application requirements of flexible DC transmission techniques, a 1 kA/10 kV half-bridge IGBT press-pack module is studied. The module is composed of three subunits in series, and each subunit consists of IGBT chips in parallel. In order to solve the problem of chips failure caused by non-uniform rigid-contacting pressure in the press-pack modules, the elastic-contacting structure is designed to ensure excellent electrical connection between chips and contact terminal. During the operating conditions, the heat generated by IGBT chips can induce the increasing of internal temperature of the module, affecting the reliability of the module. A cooling structure is introduced between the subunits to solve the heat dissipation problem of the module. In addition, the thermal analysis of subunit and the cooling structure is performed by using the finite element simulation, and the chip layout and water-cooling scheme are optimized. The testing of electrical parameters of the IGBT module is also conducted.","PeriodicalId":322720,"journal":{"name":"2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)","volume":"55 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116620723","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Petra Streit, R. Forke, S. Voigt, U. Schwarz, Roman Ziegenhardt, S. Weidlich, D. Billep, M. Gaitzsch, H. Kuhn
{"title":"Vibration sensors with a high bandwidth and low SNR, enhanced with post processing gap reduction","authors":"Petra Streit, R. Forke, S. Voigt, U. Schwarz, Roman Ziegenhardt, S. Weidlich, D. Billep, M. Gaitzsch, H. Kuhn","doi":"10.1109/EuroSimE54907.2022.9758891","DOIUrl":"https://doi.org/10.1109/EuroSimE54907.2022.9758891","url":null,"abstract":"Vibration sensors require a high sensitivity; however the fabrication process is limited by minimum gap size due to design rules. FhG ENAS and X-FAB MEMS Foundry GmbH report on a capacitive MEMS sensor element design, characterization and finally fabrication with the Open Platform technology XMB10 with additional electrostatic actuators for the post process gap adjustment. For the first time, the post process gap reduction process developed at FhG ENAS was performed on capped chips and with an industrial fabrication technology. The fabricated electrode gaps of 4 µm are reduced to 0.7 µm. Thereby, the aspect ratio is increased from 19 to 107. Moreover, the sensitivity of the sensor increases through this post processing gap reduction process by a factor of more than 30 without changing the size of the sensor chip itself.","PeriodicalId":322720,"journal":{"name":"2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128603219","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Maik Sternberg, K. A. Pareek, D. May, M. A. Ras, B. Wunderle
{"title":"Thermal Heat Path Signature of a Standard D2PAK Power Package by Transient Thermal Characterization and Modelling","authors":"Maik Sternberg, K. A. Pareek, D. May, M. A. Ras, B. Wunderle","doi":"10.1109/EuroSimE54907.2022.9758908","DOIUrl":"https://doi.org/10.1109/EuroSimE54907.2022.9758908","url":null,"abstract":"The miniaturization of electronic devices with enhanced performance comes at the cost of thermal challenges. When a device fails, it is necessary to analyze and isolate the failure in the device. A non-destructive analysis of the device is always preferred over a destructive one. Apart from being cost-effective, the non-destructive analysis also helps us to perform more than one analysis technique on the same device to verify our conclusion regarding the failure of the device.A well-established and suitable method to investigate the thermal performance of active devices like MOSFETs is the transient thermal analysis. Here, the thermal step response of the system is generated and from this the structure function is calculated. Structure functions are direct models of one-dimensional heat flow. They represent the thermal impedance of a Cauer network and thus represent the thermal signature of the heat path for the physical structure.This work aims to demonstrate the application of transient thermal measurements to various commercially available electronic power packages D2PAK, differing in their power ratings and therefore internal architecture and thus heat path, so they are ideally suited as a benchmark for a to perform a detailed interpretation of the obtained structure functions. Various thermal interface materials are used to vary the overall thermal impedance of the assembly systematically and controllably. X-ray tomography, cross-sectioning and EDX were performed from the same packages to determine the geometrical parameters and the materials included for the construction of a finite element models model. The results of the experimental measurements are validated with the results of FEM to evaluate the interpretation of the heat path signature.","PeriodicalId":322720,"journal":{"name":"2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)","volume":"103 15","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"113945467","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Chinmay Nawghane, B. Vandevelde, R. Labie, Sam Michiels, D. Hughes, Mengyao Liu
{"title":"A PoF based methodology to assess the reliability of a sensor module operating in harsh industrial environments","authors":"Chinmay Nawghane, B. Vandevelde, R. Labie, Sam Michiels, D. Hughes, Mengyao Liu","doi":"10.1109/EuroSimE54907.2022.9758839","DOIUrl":"https://doi.org/10.1109/EuroSimE54907.2022.9758839","url":null,"abstract":"This paper presents the use of physics of failure based methodology in combination with finite element analysis (FEA) to assess the reliability of electronic assemblies. Mechanical loads such as vibration and shocks are one of the important causes behind electronic assembly failure and understanding behavior of the PCB and components under vibration is crucial to assess the reliability of the product. In this paper, a condition-based monitoring sensor used in high-speed industrial machines is selected to perform a vibration analysis. First step of the reliability assessment is the failure mode and effect analysis (FMEA) which is a systematic and pro-active method to identify where and how system may fail and analyze the impact of the failures. FMEA study identified the critical components in sensor design such as a supercapacitor, a 40 pin QFN package, a LGA Network module and a standard battery. Finite element model of sensor assembly is built with a commercial software MSC Apex. Modal analysis extracts the first natural frequency as 256 Hz and shows mode shapes for the assembly. Harmonic analysis concludes that supercapacitor is the most vulnerable component under vibration and supercapacitor solder joints as well as leads may see a mechanical fatigue throughout the operation. Estimated fatigue life of the supercapacitor leads and solder joint is > 30 years and lifetime estimations are based on the lifetime model developed in house. It is pertinent to note that combination of FMEA and finite element analysis provides a quick and an efficient way to assess the reliability of the sensor module in its early design stages.","PeriodicalId":322720,"journal":{"name":"2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)","volume":"3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125462917","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
K. Akoda, A. Guédon-Gracia, E. Lebraud, J. Delétage, B. Plano, H. Frémont
{"title":"Dynamics of the corrosion for SAC305 solder alloy in salt environment","authors":"K. Akoda, A. Guédon-Gracia, E. Lebraud, J. Delétage, B. Plano, H. Frémont","doi":"10.1109/EuroSimE54907.2022.9758896","DOIUrl":"https://doi.org/10.1109/EuroSimE54907.2022.9758896","url":null,"abstract":"This study presents the corrosion dynamics of SAC305 solder alloy in two configurations (BGA solder balls components and solder material in globule) using a neutral salt spray test (NSS). SAC305 solder alloys were aged in different exposure durations ranging from 24 to 96 hours in a salt spray chamber with one salinity of 5 % NaCl at five temperatures ranging from 25°C to 45°C. Corrosion morphology, chemical composition and distribution of the elements in the corroded area and the corrosion product phases produced respectively after OM, SEM, EDX and XRD were also analyzed. The visible corrosion criterion defined on the OM and SEM results showed that the corroded areas are visible after 72h at 25°C, 60h at 30°C, 48h at 35°C, 36h at 40°C and only 24 h, at 45°C in case of BGAs solder balls components. The corroded area becomes larger at 96 hours. This indicates that temperature accelerates the corrosion mechanism. Moreover, according to the EDX result, tin (Sn), oxygen (O), and chloride ion (Cl-) were detected in the corroded area on solder balls. An activation energy (Ea) of 0.81 eV has been calculated. XRD measurements confirmed that a complex oxide chloride hydroxide (Sn3O(OH)2Cl2) was formed as a corrosion product on SAC globules. Finally, the kinetics of the failure mechanism of corrosion was investigated to refine the dynamic models of the degradation and overlay it on excessive stresses by simulations in order to predict lead-free solder alloys' lifetime.","PeriodicalId":322720,"journal":{"name":"2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)","volume":"2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132814694","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
C. Schipfer, P. Fuchs, Matthias Morak, Q. Tao, J. Zuendel
{"title":"Pressing Simulations within the PCB Manufacturing Framework","authors":"C. Schipfer, P. Fuchs, Matthias Morak, Q. Tao, J. Zuendel","doi":"10.1109/EuroSimE54907.2022.9758910","DOIUrl":"https://doi.org/10.1109/EuroSimE54907.2022.9758910","url":null,"abstract":"The present work shows the application of the Coupled-Eulerian-Lagragian (CEL) method in Finite Element (FE) simulations of pressing processes in the field of PCB manufacturing. The CEL approach prevents the problem of high element distortion in such process simulations. The required material properties of prepreg resins are determined experimentally via Differential Scanning Calorimetry (DSC) and rheometer measurements. Based on the obtained data a computationally efficient material model is implemented. It allows for the consideration of the viscous resin flow until vitrification affected by the fiber reinforcement and copper structure during the pressing process. Thus, the presented framework can be used to determine the time for the complete filling of voids in the trace pattern, the resin content of the final layer and the required pressing pressure profile for a given final layer thickness.","PeriodicalId":322720,"journal":{"name":"2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)","volume":"79 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132181562","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Mustafa SHQAIR, Z. Khatir, A. Ibrahim, M. Berkani, A. Halouani, T. Hamieh
{"title":"Physicochemical-microstructural approach for modeling the crack passage at topside metallic parts in IGBT semiconductor power electronics","authors":"Mustafa SHQAIR, Z. Khatir, A. Ibrahim, M. Berkani, A. Halouani, T. Hamieh","doi":"10.1109/EuroSimE54907.2022.9758895","DOIUrl":"https://doi.org/10.1109/EuroSimE54907.2022.9758895","url":null,"abstract":"Insulated-gate bipolar transistors (IGBTs) are widely used components in power electronics applications. Upon operation, the difference in thermal expansion coefficients of materials composing the upper metallic parts causes thermal fatigue. The latter leads to degradations at metallic topside interconnections through the formation of cracks [1]. This paper focuses on a new physicochemical-microstructural approach for modeling the crack propagation at the contact interface between wires and metallization layers in a power module to answer the following question: what is the preferential crack path along with the interface, and what are the influencing parameters? The model is based on a cohesive zone model (CZM) approach [2] in the vicinity of the contact, used for predicting the crack propagation pathway in a small interfacial region on either sides of a contact. To achieve such predictability, CZM parameters are linked to physicochemical-microstructural properties, i.e., the crack propagation is interpreted at the metallic contact zone based on this linkage. Therefore, this work’s originality lies in combining a fracture mechanics approach and a physicochemical-microstructural one.","PeriodicalId":322720,"journal":{"name":"2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)","volume":"6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124205745","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Performance Comparison for Stable Compact Modelling of Piezoelectric Microactuator","authors":"Arwed Schütz, T. Bechtold","doi":"10.1109/EuroSimE54907.2022.9758853","DOIUrl":"https://doi.org/10.1109/EuroSimE54907.2022.9758853","url":null,"abstract":"Mathematical methods of model order reduction generate efficient and accurate system-level models from high-dimensional device-level models. Applying this methodology to multiphysical finite element models, as arising from piezoelectric setups, does not necessarily preserve the original system’s stability. To solve this problem, several methods have been developed over the past few years. However, these methods were only demonstrated on few numerical case studies and their performance has not been investigated systematically. This work fills the gap and evaluates their respective performances, quantifying the impact of various parameters on each method’s accuracy and computational demand. Furthermore, a piezoelectric chip actuator is introduced as a novel test case, complementing the piezoelectric energy harvesters studied in previous work.","PeriodicalId":322720,"journal":{"name":"2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)","volume":"9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124549151","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
N. Pflügler, S. Breitenreiner, R. Pufall, B. Wunderle
{"title":"Low Cycle Fatigue of Thin Metal Films on Vibrating Silicon MEMS Cantilevers: Finite Element Modelling Facilitating Experimental Design","authors":"N. Pflügler, S. Breitenreiner, R. Pufall, B. Wunderle","doi":"10.1109/EuroSimE54907.2022.9758840","DOIUrl":"https://doi.org/10.1109/EuroSimE54907.2022.9758840","url":null,"abstract":"Within our reliability assessments, we study low cycle fatigue of thin metal films that are essential for the electrical connection in semiconductor devices. The dedicated test vehicle is a silicon-based micro-cantilever with a thin metal meander on top. Using this test vehicle we are able to perform our experiments under isothermal conditions, and, thus, without the interaction of thermal and mechanical influences. The test vehicle was initially designed to induce periodical compressive and tensile strain by resonant shaking of the cantilever beam. Within this paper, we explore the mechanical impact of deflections on the stress state inside the thin Aluminium layers by Finite Element (FE) simulations. This study aids the fundamental understanding of the material behaviour. The results are an important input for the definition of a specification for an upcoming custom-made, low-cost, tabletop test stand. Results indicate that external forces in the mN-range to the cantilever tip result in sufficiently large deflections up to a few mm. We found a linear relation between the maximum cantilever deflection and the maximum meander deflection. The minimum cantilever deflection needed to address low cycle fatigue (plastic deformation) of the 1-µm-thick Aluminium layer lies at 0.6 mm. In this case, part of the Aluminium meander also stays within the elastic region. Deflections greater than 0.6 mm lead to plastic deformation of the full meander length on top of the cantilever. The peak strain is reached shortly after the transition point from body to cantilever and decreases steadily until the end of the metal line.","PeriodicalId":322720,"journal":{"name":"2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)","volume":"24 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114872570","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Shizhen Li, Xu Liu, Jing Jiang, Chunjian Tan, Chenshan Gao, Yang Liu, H. Ye, Guoqi Zhang
{"title":"Effects of shell thickness on the thermal stability of Cu-Ag core-shell nanoparticles: a molecular dynamics study","authors":"Shizhen Li, Xu Liu, Jing Jiang, Chunjian Tan, Chenshan Gao, Yang Liu, H. Ye, Guoqi Zhang","doi":"10.1109/EuroSimE54907.2022.9758874","DOIUrl":"https://doi.org/10.1109/EuroSimE54907.2022.9758874","url":null,"abstract":"Cu-Ag core-shell (CS) nanoparticle (NP) is considered as a cost-effective alternative material to nano silver sintering material in die attachment application. To further reduce the cost, the thickness of the Ag shell can be adjusted. Whereas the shell thickness will also affect the thermal stability of the Cu-Ag CSNPs. In this study, molecular dynamics simulation was applied to study the thickness effect on the thermal behavior of Cu-Ag CSNPs. The melting points of CSNPs and Pure NPs can be determined by the evolutions of Potential Energy (PE), and the Lindemann index (LI) of the system. The results indicated that the melting points of CS NPs were lower than monometallic NP and the melting point of CS NP is influenced by the size of the Cu core and the number of lattice mismatches. Moreover, the distribution of atoms’ LI showed that the premelting point is independent of shell thickness. However, the fraction of atoms that occurred premelting is increased with the decrease of the shell thickness. Otherwise, we also simulated the sintering process of double CS NPs with equal size.","PeriodicalId":322720,"journal":{"name":"2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-04-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129475214","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}