Journal of Aceh Physics Society最新文献

{"title":"Instrumentation of realtime monitoring system towards level of C6H12O6, C2H5OH, CO2, temperature in tapai fermentation process","authors":"Y. Yuliani, Khairi Suhud, Dedi Satria, Lelifajri Lelifajri, B. Ginting, Y. Aisyah, Fauzi Fauzi, M. S. Surbakti","doi":"10.24815/jacps.v10i3.19161","DOIUrl":"https://doi.org/10.24815/jacps.v10i3.19161","url":null,"abstract":"Abstrak. Tapai merupakan makanan yang dihasilkan dari hasil fermentasi, salah satunya berbahan dasar dari ubi kayu. Fermentasi oleh ragi (saccharomyces serevesiae) menjadikan perubahan kimia pada substrat karena aktivitas enzim yang dihasilkan mikroorganisme. Parameter-parameter yang ditinjau adalah perubahan kadar C6H12O6, gas C2H5OH, gas CO2, suhu dan kelembapan dalam proses fermentasi melalui sistem pengukuran elektronik berbasis mikrokontroller Arduino Uno. Rangkaian sensor mengandung modul input yaitu sensor FC-28, sensor MQ-3, sensor MG-811, sensor DHT-11 dan modul pemroses mikrokontroler ATMEGA238 dengan sistem Arduino Uno dan pada komponen output menggunakan layar LCD 2X16. Kadar karakterisasi berdasarkan keluaran ADC (Analog to Digital Converter) untuk C6H12O6 adalah 535 untuk tapai ubi kayu. Kadar C6H12O6 akan terus menurun dari hari pertama sampai hari keempat yang mencapai 175 pada tapai ubi kayu. Diperoleh nilai akhir kadar gas C2H5OH yaitu 582. Kadar gas CO2 406 untuk tapai ubi. Selanjutnya nilai suhu 31oC untuk tapai ubi dengan nilai kelembaban 95RH. Waktu panen tapai dapat dipersingkat yaitu dari 7 hari menjadi 4 hari. Penelitian ini diharapkan dapat memberikan informasi pemakaian yang dapat dipergunakan untuk tampilan komposisi tapai secara komersial atau untuk tujuan kesehatan. Abstract. Tapai is food produced from fermentation, one of which is made from cassava. Fermentation by yeast (Saccharomyces serevesiae) causes chemical changes in the substrate due to the activity of enzymes produced by microorganisms. The parameters reviewed are changes in levels of C6H12O6, C2H5OH gas, CO2 gas, temperature and humidity in the fermentation process through an electronic measurement system based on the Arduino Uno microcontroller. The sensor circuit contains an input module, namely FC-28 sensor, MQ-3 sensor, MG-811 sensor, DHT-11 sensor and ATMEGA238 microcontroller processing module with the Arduino Uno system and the output component uses a 2X16 LCD screen. The grade based on the ADC (Analog to Digital Converter) output for the C6H12O6 is 535 for cassava tapai. Levels of C6H12O6 will continue to decline from the first day to the fourth day reaching 175 in cassava tapai. Obtained the final value of C2H5OH gas content is 582. CO2 gas content of 406 for cassava tapai. Furthermore, the temperature value of 31oC for cassava tapai with a humidity value of 95RH. The harvest time for tapai can be shortened from 7 days to 4 days. This research is expected to provide usage information that can be used to display tapai composition commercially or for health purposes. Keywords: fermentation, tapai, cassava, FC-28, MQ-3, MG-811, DHT11, Microcontroller.","PeriodicalId":31989,"journal":{"name":"Journal of Aceh Physics Society","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"46628460","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Identification of gold mineralization zones of low sulfidation epithermal systems using geoelectrical and magnetic methods in Ciparay area, Cibaliung","authors":"Wahyu Eko Junian, A. Laesanpura, A. Y. Paembonan, Muhammad Arief Wicaksono","doi":"10.24815/JACPS.V10I3.18521","DOIUrl":"https://doi.org/10.24815/JACPS.V10I3.18521","url":null,"abstract":"Abstrak. Cibaliung merupakan daerah pertambangan mineral yang berada di Provinsi Banten. Hal ini, dibuktikan dengan adanya lubang tambang emas di daerah Cikoneng dan Cibitung. Penelitian tentang geofisika penting dilakukan guna menemukan cadangan emas baru di daerah Ciparay yang terletak di Sebelah Tenggara Cikoneng dan Cibitung. Metode geofisika yang digunakan di antaranya magnetik, resistivitas, dan induced polarization (IP). Metode magnetik digunakan sebagai survei pendahuluan untuk menggambarkan keberadaan struktur geologi pengontrol mineralisasi emas. Melalui peta reduce to pole dapat diketahui adanya tanda-tanda keberadaan struktur geologi yang ditunjukkan oleh anomali negatif (-220 hingga -135 nT) di Bagian Barat Daya daerah penelitian. Hasil teknik edge detectors menunjukkan adanya pola struktur dengan arah Northwest (NW) dan North-Northeast (NNE) yang dominan berada di Bagian Barat Daya sebelah Utara daerah penelitian. Metode resistivitas dan IP digunakan sebagai survei detail untuk menentukan keberadaan mineral yang terkandung dalam batuan. Hasilnya menunjukkan bahwa zona potensi mineralisasi ditunjukkan oleh anomali tinggi (resistivitas 50 ohm.m dan chargeability 40 msec). Resistivitas tinggi diduga sebagai respons batuan induk andesitic sedangkan, nilai chargeability tinggi merupakan respons dari hadirnya mineral-mineral bijih seperti emas dan perak. Zona potensi mineralisasi berada pada posisi patok 350-800 dengan arah persebaran mengikuti arah struktur geologi pengontrolnya yaitu NW dan NNE. Abstract. Cibaliung is a mineral mining area located in Banten Province. The area including gold mining in Cikoneng and Cibitung areas. Geophysical research is important to find new gold reserves at the Ciparay area, located in the Southeast of Cikoneng and Cibitung. Geophysical methods used include magnetic, resistivity, and IP. The magnetic method was applied as a preliminary survey to delineate the presence of the geological structure controlling the gold mineralization. Based on the RTP map, signs of the presence of geological structures are shown by anomalies -220 to -135 nT in the Southwestern part of the study area. The results of edge detector techniques show the existence of structural patterns in the direction of NW and NNE which are dominant in the Southwestern North of the study area. The resistivity and IP methods are employed for detailed investigation in order to obtain to determine the presence of minerals contained in rocks. The results show that the mineralized zones are indicated by high resistivity ( 50 ohm.m) and high chargeability ( 40 msec). High resistivity response is caused by andesitic source rock whereas, high chargeability response is related to the presence of ore minerals such as gold and silver. The mineralization prospect zone is indicated at the position of 350-800 and its direction corresponds to the direction of its geological structure namely NW and NNE.Keywords: New gold reserves, Negative magnetic anomalies","PeriodicalId":31989,"journal":{"name":"Journal of Aceh Physics Society","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2021-04-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"43880723","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Analysis of the effect of annealing rate on the thinness film of BaZr0.4Ti 0.6O3 at 800°C for 2 hours","authors":"Tengku Said Luqman Hussain Shahab, Y. Hamzah, Zulkarnain Krisman, A. S. Rini, R. Dewi","doi":"10.24815/jacps.v10i1.17819","DOIUrl":"https://doi.org/10.24815/jacps.v10i1.17819","url":null,"abstract":"Abstrak. Ferroelektrik merupakan bahan yang mempunyai polarisasi spontan serta mempunyai kemampuan mengubah polarisasi internalnya dengan menggunakan medan listrik yang sesuai. Ferroelektrik juga diaplikasikan sebagai kapasitor. Material ferroelektrik buat dalam bentuk film tipis. Barium Zirconium Titanate (BZT) dengan komposisi BaZr0.4Ti0.6O3 dibuat menggunakan metode sol-gel. Substrat yang digunakan yaitu FTO yang telah di etching dan di lapisi BZT serta di annealing pada suhu 800°C selama 2 jam dengan kenaikan laju suhu annealing yaitu 5°C dan 10°C. Sampel di karakterisasi menggunakan XRD. Hasil karakterisasi XRD menunjukkan adanya puncak-puncak yang menandakan terdapat struktur kristal. Struktur kristal yang dihasilkan berada pada bidang 100  pada sudut 2θ = 22.78°, bidang 110  pada sudut 2θ = 32.17°, bidang 111 pada sudut 2θ = 38.42°, bidang 200 pada sudut 2θ = 47.73°. Struktur yang dihasilkan pada penelitian ini yaitu tetragonal dimana a = b = 3.91 nm dan c = 4.05 nm. Laju kenaikan suhu berpengaruh pada puncak Difraksi Sinar-X. Nilai FWHM untuk 5°C lebih kecil dari 10°C, ini menunjukan adanya kerapatan yang lebih besar saat di annealing dengan laju 5°C. Nilai ukuran kristal yang di dapat dengan kenaikan suhu 5°C dan 10°C pada bidang 100 yaitu 3.94 nm dan 3.22 nm. Ukuran kristal berbanding terbalik dengan nilai FWHM dimana laju kenaikan suhu annealing yang kecil menyebabkan ukuran kristal membesar. Abstract Ferroelectrics is a material that has spontaneous polarization and ability to change its internal polarization by using a suitable electric field. Ferroelectricsis also applied as a capacitor. The ferroelectric material is made in the form of a thin film. Barium Zirconium Titanate (BZT) with the composition BaZr0.4Ti 0.6O3 is prepared using the sol-gel method. The substrate used is FTO which has been etched and coated with BZT and annealed at a temperature of 800°C for 2 hours with a increase in the annealing temperature speed of 5°C and 10°C.Samples are characterized using XRD. The XRD characterization results show peaks indicating a crystal structure. The resulting crystal structure is in a plane 100 at an angle of 2θ = 22.78°, a plane 110 at an angle of 2θ = 32.17°, a plane 111 at an angle of 2θ = 38.42°, a plane 200 at an angle of 2θ = 47.73°. The resulting structure in this study is a tetragonal where a = b = 3.91 nm  and c = 4.05 nm. The speed at which temperature increases has an effect on the peak of the X-Ray Diffraction.The FWHM value for 5°C is less than 10°C which indicates a greater density when annealed at a speed of 5 °C. The value of the crystal size obtained with an increase in temperature of 5°C and 10°C in the  plane 100 is 3.94 nm and 3.22 nm. The crystal size is inversely proportional to the FWHM value where the small speed of the annealing temperature increase causes the crystal size to enlarge.Keywords: BaZr0.4Ti0.6O3 Thin Film,  Speed of Annealing Temperature Increase,  Sol-gel method, X-Ray Diffraction (XRD). ","PeriodicalId":31989,"journal":{"name":"Journal of Aceh Physics Society","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2020-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48111060","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Study of activated carbon characteristic from ketaping fruit shell (Terminalia Catappa) as supercapasitors electrode","authors":"Rahma Joni, S. Syukri, H. Aziz","doi":"10.24815/jacps.v10i1.17755","DOIUrl":"https://doi.org/10.24815/jacps.v10i1.17755","url":null,"abstract":"Studi karakteristik karbon aktif dari cangkang buah ketaping (Terminalia Catappa) sebagai elektroda superkapasitor telah diteliti. Karbon aktif dari cangkang buah ketaping (CBK) disiapkan dengan proses karbonisasi pada suhu 400oC dan Proses aktivasi KOH pada suhu 800oC di bawah aliran gas N2. Karbon aktif CBK memiliki kandungan karbon dengan massa atomik sebesar 97,52%. Karbon aktif CBK memiliki struktur amorf dengan dua buah puncak yang lebar pada sudut 2θ yaitu 24,93o dan 42,93o yang bersesuaian dengan bidang (002) dan (100). Karbon aktif CBK yang dihasilkan memiliki pola serapan dengan jenis ikatan OH, C-H, C=O, dan C=C. Adanya ikatan OH dan C=O menunjukkan bahwa arang aktif yang dihasilkan cenderung bersifat lebih polar. Morfologi permukaan karbon aktif CBK menunjukan distribusi ukuran pori yang merata dan luas permukaan yang besar. Luas permukaan spesifik karbon aktif dari CBK adalah 799,892 m2×g-1 dengan volume total pori 0,080 cm3×g-1 dan jari-jari pori rata-rata 1,9072 nm. Kapasitansi spesifik dari karbon aktif dari CBK adalah sebesar 125,446 F×g-1. Studies on the characteristics of activated carbon from ketaping fruit shells (Terminalia Catappa) as supercapacitor electrodes have been studied. Activated carbon from ketaping fruit shells (KFS) prepared by carbonization process at 400oC and the KOH activation process is carried out at 800oC under N2 gas flow. Activated carbon KFS has a carbon content with 97.52% of atomic mass. Activated carbon KFS has an amorphous structure with two wide peaks at an angle of 2θ 24.93ᵒ and 42.93ᵒ corresponding to the plane (002) and (100). Activated carbon KFS produced has an absorption pattern with OH, C-H, C = O, and C = C bond types. The presence of OH and C = O bonds indicates that the activated charcoal produced tends to be more polar. The surface morphology of activated carbon KFS shows an even distribution of pore size and large surface area. The specific surface area of activated carbon KFS is 799.892 m2×g-1 with a total pore volume 0.080 cm3×g-1 and an average pore radius of 1.9072 nm. The specific capacitance value of activated carbon KFS is 125.444 F×g-1.Keywords: Ketaping, Activated Carbon, Supercapacitor, Activator, Capacitance. ","PeriodicalId":31989,"journal":{"name":"Journal of Aceh Physics Society","volume":"1 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2020-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47086393","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Application of 2D resistivity method to determine serpentinite rocks in Kuta Cot Glie, Aceh Besar","authors":"Muhammad Reyza Khalid, Fadhli Syamsudin, N. Zaini, D. Sugiyanto","doi":"10.24815/jacps.v10i1.17904","DOIUrl":"https://doi.org/10.24815/jacps.v10i1.17904","url":null,"abstract":"Abstrak. Kuta Cot Glie di Aceh Besar, merupakan salah satu daerah yang memiliki potensi batuan metamorf serpentinit. Batuan ini dapat digunakan sebagai bahan baku untuk pembuatan pupuk, batu hias, dan beberapa manfaat lainnya. Penelitian ini bertujuan untuk menginterpretasi model bawah permukaan dan memperkirakan ketebalan lapisan batuan serpentinit. Metode geofisika yang digunakan adalah metode geolistrik resistivitas dengan konfigurasi Wenner-Schlumberger. Pengukuran dilakukan pada dua lintasan sepanjang 275 m untuk masing-masing lintasan dengan 56 buah elektroda dan jarak spasi setiap elektroda adalah 5 m. Prinsip metode geolistrik tersebut memanfaatkan sifat kelistrikan suatu material untuk mengetahui karakteristik material. Hasil penelitian menunjukkan bahwa nilai resistivitas adalah 50 - 150 Ωm yang diperkirakan lapisan batuan serpentinit dengan ketebalan 10 - 35 m.Abstract. Kuta Cot Glie located in Aceh Besar, Aceh Province, has a natural potential of serpentine. The metamorphic rocks used as a raw material for making fertilizer, ornamental stones, and other benefits. This research aims to interpret sub-surface models and estimate the thickness of the rock layers. The geophysical method used in this study was the resistivity geoelectric method with a Wenner-Schlumberger configuration. Measurements were carried out on two lines with 275 m for each line and the spacing of the electrode was 5m using 56 electrodes. The physical approach utilizes the electrical properties of a material to determine the characteristics of its material. The result show that the resistivity of 50 to 150 Ωm can be interpreted as serpentinite rock layers with the thickness of 10 m to 35 m.Keywords: Serpentinite, resistivity, geoelectric method, Wenner-Schlumberger configuration.","PeriodicalId":31989,"journal":{"name":"Journal of Aceh Physics Society","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2020-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"48947460","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Ripeness Level Classification of Oil Palm Fresh Fruit Bunch Using Laser Induced Fluorescence Imaging","authors":"H. Ishak, M. Shiddiq, R. H. Fitra, Nadia Zakyyah Yasmin","doi":"10.24815/jacps.v8i3.14139","DOIUrl":"https://doi.org/10.24815/jacps.v8i3.14139","url":null,"abstract":"Tingkat Kematangan Tandan Buah Segar (TBS) kelapa Sawit merupakan faktor penentu kualitas crude palm oil (CPO) yang dihasilkan pabrik kelapa sawit. Metode penyortiran TBS setelah panen atau sebelum memasuki proses perebusan pada umumnya dilakukan secara manual mengandalkan penglihatan dan pengalaman. Metode ini rentan kesalahan dan bersifat subyektif. Metode pencitraan berkembang sangat cepat karena kemajuan dalam bidang komputer dan teknik pengolahan citra, khususnya untuk sistem sortasi dan grading. Penelitian ini mengunakan metode pencitraan fluoresensi yang diinduksi laser untuk mengakses dan mengklasifikasi tingkat kematangan TBS kelapa sawit. Hubungan antara tingkat keabuan dan tingkat kekerasan buah TBS dianalisa. Sampel terdiri dari 27 TBS kelapa sawit varietas Tenera. Tingkat kematangan dikategorikan oleh pemanen berpengalaman menjadi mentah, matang, dan lewat matang. Tiga bagian TBS yaitu pangkal, tengah, dan ujung disinari laser dioda 640 nm mengenai 5 buah pada tiap bagian. Kemudian citra direkam mengunakan kamera CMOS monokrom. Selanjutnya 15 buah tersebut diuji tingkat kekerasan mengunakan penetrometer. Klasifikasi tingkat kematangan dilakukan mengunakan K-mean clustering. Hasil penelitian memperlihatkan bahwa metode pencitraan fluoresensi yang diinduksi laser potensial digunakan dalam mengklasifikasi tingkat kematangan TBS. Tingkat kekerasan buah berkorelasi positif terhadap tingkat keabuan citra TBS. K-mean clustering memperlihatkan tiga kelompok tingkat kematangan yang terdiri dari 0, 1 dan 2. Ripeness levels of oil palm fresh fruit bunches (FFB) are the main factor to determine the quality of crude palm oil (CPO) produced by Oil Palm Mill. Sorting oil palm FFB after harvest or before entering the boiling process is generally done manually which relies on human vision and experience. Imaging methods has developed vastly due to advances in computer and image processing techniques. This study used a laser-induced fluorescence imaging to access and classify the ripeness levels of oil palm FFB of Tenera variety. The relationship between gray value and the level of firmness of FFB fruit was analyzed. The samples consisted of 27 oil palm FFB categorized  by experienced harvester as unripe, ripe, and overripe. Laser light was shone on equatorial part of each FFB such that 5 fruitlets were covered by laser light, then the image of the front part was acquire using a monochrome CMOS camera. The step was repeated for basil and apical parts in sequent. All 15 fruitlets were testing for the firmness level using a penetrometer. Ripeness level classification was done using K-mean clustering. The results showed that the laser-induced fluorescence imaging method are potential to be used to determine the ripeness levels of FFB. The fruit firmness is positively correlated with the gray value of the image of FFB. K-mean clustering shows three ripeness centroid of 0, 1 and 2 . Keyword: Fluorecence Imaging, Oil Palm, Fresh Fruit Bunches, Firmness, Las","PeriodicalId":31989,"journal":{"name":"Journal of Aceh Physics Society","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-09-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44806949","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Interpretation of Near Surface Based on the Magnetic Data at Geothermal Area, Jaboi, Sabang","authors":"Dinni Mahmudi, Muhammad Isa, D. Sugiyanto","doi":"10.24815/jacps.v8i3.14550","DOIUrl":"https://doi.org/10.24815/jacps.v8i3.14550","url":null,"abstract":"Telah dilakukan penelitian geofisika menggunakan metode magnetik untuk mendapatkan struktur bawah permukaan di daerah prospek panas bumi Jaboi, Sukajaya, Kota Sabang. Pengukuran medan magnetik total dilakukan pada 40 titik menggunakan Proton Precession Magnetometer (PPM). Daerah Jaboi memiliki sudut inkinasi -4.416 dan deklinasi -0.875 dengan nilai medan magnetik total berkisar antara 41550 hingga 42600 nT. Untuk mendapatkan nilai anomali magnetik dilakukan koreksi diurnal dan koreksi IGRF (International Geomagnetic Reference Field). Setelah koreksi dilakukan diperoleh nilai anomali magnetik daerah panas bumi Jaboi antara -200 nT sampai dengan -950 nT. Selanjutnya hasil anomali magnetik ini digunakan dalam memodelkan struktur bawah permukaan dengan panjang lintasan 1800 m dari Tenggara-Barat Laut. Berdasarkan interpretasi data anomali magnetik menunjukkan daerah penelitian didominasi oleh anomali rendah yang berarti daerah manifestasi panas bumi. Interpretasi anomali tinggi dan rendah menunjukkan adanya patahan yang diduga sebagai patahan Ceuneuhot. Dari hasil pemodelan 2D menggunakan software Mag2DC, menunjukkan bahwa terdapat 5 lapisan dengan kedalaman 0 - 1000 m. Lapisan-lapisan ini adalah soil ( = 0,00 x 10-6 SI), andesit terubah (  = 13,408 x 10-6 SI), breksi tufa terubah (  = 12,686 x 10-6 SI), andesit terubah (  = 13,423 x 10-6 SI) dan breksi andesit (  = 13,535 x 10-6 SI). Melalui pemodelan ini diyakini zona patahan adalah patahan Ceuneuhot. Geophysical reasearch by using magnetic method was done in order to obtain subsurface structure of geothermal prospect area Jaboi, Sukajaya, Sabang City. The measurement of total magnetic field was taken at 40 points using Proton Precession Magnetometer (PPM). Jaboi area has an inklination angle -4.416 and declination angle -0.875 which has total magnetic field range between 41550 to 42600 nT. Diurnal Correction and IGRF (International Geomagnetic Reference Field) correction was used to obtain magnetic anomalies. The values of magnetic anomalies in Jaboi Geothermal Area is -200 to -950 nT. The result of magnetic anomalies was used to modelled the subsurface structure with profile distance is about 1800 m from Southeast to Northwest. Based on the magnetic anomalies data, the reaserch area dominated by low anomalies that indicated geothermal manifestation area. High and low magnetic anomalies indicated a fault that estimated as Ceuneuhot fault. From the result of 2D modelling using software Mag2DC, showed that the research area consist of 5 subsurface structure from 0 – 1000 m depth. The layers are soil (  = 0.00 × 10-6 SI), altered andesite (  = 13.408 × 10-6 SI), altered breccia-tuff (  = 12.686 × 10-6 SI), altered andesite (  = 13.423 × 10-6 SI), and breccia-andesite (  = 13.535 × 10-6 SI). Also from the model was  obtained the Ceuneuhot fault zone.  Keywords: Magnetik, Anomali Magnetik, Struktur Bawah Permukaan, Panas Bumi","PeriodicalId":31989,"journal":{"name":"Journal of Aceh Physics Society","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-09-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44805600","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Ripeness Classification of Oil Palm Fresh Fruit Bunch Using an Optical Probe","authors":"Nurmaya Sari, M. Shiddiq, R. H. Fitra, Nadia Zakyyah Yasmin","doi":"10.24815/jacps.v8i3.14122","DOIUrl":"https://doi.org/10.24815/jacps.v8i3.14122","url":null,"abstract":"Penggunaan spektroskopi fluoresensi yang nondestruktif bidang pertanian semakin intensif dilakukan khususnya untuk evaluasi produk pertanian. Sortasi dan grading Tandan Buah Segar (TBS) Kelapa Sawit sebelum memasuki proses produksi Crude Palm Oil sangat penting untuk memenuhi standar produksi dan ekspor. Sistem sortasi dan grading elektronik dibutuhkan untuk mengantikan metode sortasi manual mengandalkan penglihatan dan pengalaman. Pada penelitian ini probe optik yang terdiri dari laser dioda 640 nm dan dua fotodioda inframerah dalam konfigurasi triangulasi digunakan untuk mengevaluasi tingkat kematangan TBS kelapa sawit dan hubungannya dengan kekerasan buah dan tegangan fotodioda. Sampel terdiri dari 23 TBS Tenera. Buah kelapa sawit pada setiap TBS disinari laser pada tiga bagian yaitu pangkal, tengah dan ujung, setiap bagian terdiri dari tiga buah kelapa sawit. Tegangan keluaran dari kedua fotodioda dijumlahkan dan diperkuat oleh rangkaian multiboard komersial. Setelah tegangan diperoleh, ke-9 buah kelapa sawit dilepaskan dari TBS, tingkat kekerasan buah diukur mengunakan penetrometer. Hasil penelitian menunjukkan bahwa tingkat kematangan TBS mempunyai korelasi linier terhadap kekerasan buah dengan kekerasan yang tertinggi pada buah mentah sebesar 9,39 kg/cm2 dan terendah pada buah terlalu matang sebesar 5,64 kg/cm2. Nilai tegangan rata-rata terkecil pada buah mentah dan tertinggi pada buah matang kemudian turun pada buah lewat matang. Hasil K-means clustering menunjukkan pengelompokan 4 tingkat kematangan berdasarkan nilai kekerasan dan tegangan yaitu F0, F1, F2, dan F3. Applications of nondestructive fluorescence spectroscopy in agriculture have been intensively carried out especially to evaluate agriculture products. Sorting and grading oil palm fresh fruit bunches (FFB) before Crude Palm Oil milling processes are important tasks to meet the production and export standards. Electronic systems for sorting and grading of FFBs are needed to replace manual sorting method which depends on human vision and experience. In this study, an optical probe consisted of a 635 nm diode laser and two photodiodes was used to evaluate the ripeness level of oil palm FFB and its relation to both the fruitlet firmness and resulted photodiode voltages. Laser was directed to each of nine fruitlets of each FFB from three parts; basil, equatorial, and apical. Output voltages from each photodiode were summed and amplified by a commercially multi-board circuit. Then their firmness levels were obtained using a penetrometer. The results show that there is a linear correlation between the firmness levels and the FFB ripeness levels. The firmness values ranges from 9.39 kg/cm2 for unripe FFB and 5.64 kg/cm2 for overripe FFB. The highest voltage is obtained for ripe FFB and less for unripe and overripe FFB. K-means clustering results indicate that the overall ripeness levels are grouped into 4 levels of ripeness, namely F0, F1, F2 and F3 based on the values of hardness and","PeriodicalId":31989,"journal":{"name":"Journal of Aceh Physics Society","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"42831581","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"NDVI Based Analysis on the Impact of 2004 Tsunami Disaster Recovery Toward Vegetation Condition in Banda Aceh","authors":"Z. Hayati, S. Syahreza, M. S. Surbakti","doi":"10.24815/jacps.v8i3.12688","DOIUrl":"https://doi.org/10.24815/jacps.v8i3.12688","url":null,"abstract":"Perubahan tutupan lahan banyak terdapat di kota-kota yang sedang berkembang. Banda Aceh, Indonesia merupakan salah satu provinsi yang sudah mengalami peningkatan jumlah penduduk dan percepatan pembangunan. Pasca bencana gempa dan tsunami 2004 perubahan penggunaan dan tutupan lahan (land use and land cover change/LULC) terlihat semakin meluas, dan hal ini berdampak pada berkurangnya lahan vegetatif. Artikel ini menjelaskan cara menganalisis NDVI dengan mengunakan data citra satelit Landsat 5 dan 8 untuk mengetahui kerapatan vegetasi di wilayah Banda Aceh dengan 9 kecamatan yang diambil tahun 2004, 2009, dan 2017. Studi ini mengidentifikasi antara pola perubahan tutupan lahan dan menyelidiki dampak tsunami, sehingga banyak kehilangan vegetasi pada lingkungan tersebut. Penelitian ini menggunakan Sistem Informasi Geografis (GIS) dimana tahap awal adalah mengumpulkan data citra satelit. Pada tahap kedua dilakukan pengolahan data menggunakan software PCI Geomatika 2016. Hasil analisa citra menjelaskan tahun 2004, 2009 dan 2017  kawasan kehijauan, masih banyak terdapat di kecamatan Lueng Bata, Ulee Kareng dan Banda Raya. Changes in land cover are often found in developing cities. Banda Aceh is one of the provinces in Indonesia that experiences an increase in the population and accelerated development. Land use and land cover (LULC) have increased dramatically since the 2004 earthquake and tsunami disaster and continued to reduce the vegetative land. This article explains how to analyze NDVI using Landsat 5 and 8 of the satellite image data. It aims to determine the vegetation density of Banda Aceh in 9 sub-districts taken in 2004, 2009 and 2017. This study identified patterns of changes in land cover and investigated the impact of the tsunami on the vegetational loss of the environment. Geographic Information System (GIS) was used in the study in which the satellite image data were collected before they were processed in the PCI Geomatika 2016 software. The results indicate that in the years of 2004, 2009 and 2017, many green areas are present in Lueng Bata, Ulee Kareng and Banda Raya sub-district. Keywords: Remote Sensing, Landsat Imagery, and NDVI","PeriodicalId":31989,"journal":{"name":"Journal of Aceh Physics Society","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"44935247","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Identification of Aquifer Layer Based on 2D Resistivity Data in Lhokseumawe Aceh-Indonesia","authors":"Z. Fadhli, M. Syukri, M. Marwan","doi":"10.24815/jacps.v8i3.14518","DOIUrl":"https://doi.org/10.24815/jacps.v8i3.14518","url":null,"abstract":"Penelitian untuk mengidentifikasi keberadaan air tanah dan kedalaman akuifer telah dilakukan di wilayah KEK Arun Lhokseumawe Provinsi Aceh dengan kondisi geologi daerah penelitian adalah batuan lanauan dan batuan lempung serta geomorfologinya berupa perkebunan dan sungai buatan. Penelitian ini mengaplikasikan metode geolistrik resistivitas 2D dengan konfigurasi Wenner-Schlumberger. Akuisisi data di lapangan menggunakan alat SuperSting R8 yang keseluruhannya mempunyai 4 lintasan pengukuran dengan lintasan 1 dan 2 memotong lintasan 3 dan 4, panjang masing-masing lintasan pengukuran tersebut adalah 400 m. Pemprosesan data Hasil akuisisi di lapangan menggunakan software Res2dinv untuk menampilkan model 2D bawah permukaan di lokasi penelitian. Hasil interpretasi menunjukkan lintasan L1 pada kedalaman sampai dengan 70 m terdapat lempung berpasir, lanauan dan gravel. Terdapatnya pengaruh instrusi air laut pada kedalaman 25 m yang ditandai dengan nilai resistivitas 1 Ώm. Lapisan akuifer di identifikasi pada jarak bentangan 100 - 200 m dan pada kedalaman 60 m dengan nilai resistivitas 30 Ωm. Penampang lintasan 3 dan 4 tidak menunjukkan adanya lapisan akuifer yang layak untuk diexploitasi pada lintasan tersebut. Interpretasi lintasan L4 menunjukkan adanya intrusi air laut yang besar pada lapisan pertama. Terdapat 3 lapisan yang kontras yaitu lapisan lempung berpasir, gravel/lempung lanauan dan batuan dasar. Lapisan akuifer pada lintasan 4 diinterpretasikan berada pada kedalaman 70 m dengan nilai resistivitas 30 Ωm. Rekomendasi yang paling layak untuk lokasi pengeboran yaitu pada lintasan 4 pada jarak bentangan 180 m dengan jenis akuifer tertekan. The research to identified ground water and depth of aquifer was conducted in KEK Arun Lhokseumawe Aceh Province. The geology contained siltstone and clay with geomorphology area are plantation and artificial river. The 2D resistivity acquisition was using Supersting R8 equipment with Wenner-Schlumberger array. There are 4 survey lines that conducted in the area where line 1 and 2 were crossed with line 3 and 4. The length of each line is 400 m respectively. The data processing was using Res2dinv software to shows 2D subsurface model. The result shown that line 1 is sandy clay, siltstone and gravel at depths up to 70 m. It was influenced by sea water at depth 25 m with resistivity value of 1 Ωm. The aquifer layer was identified at depth 60 m with resistivity value of 30 Ωm. However, line 3 and 4 were presented that the area surveys are suitable for exploration which have not indicate the existence of an aquifer layer. In the last line, it shown sea water intrusion at the first layer. There are 3 layers that contained in line 4 which is clayey sand, gravel and bedrock. The aquifer layer at Line 4 was interpreted at depth 70 m with resistivity value of 30 Ωm. The most feasible recommendation for a drilling location is on Line L4 at a distance of 180 m with a confined aquifer type. Keywords: Aquifer, Resistivity, Lho","PeriodicalId":31989,"journal":{"name":"Journal of Aceh Physics Society","volume":" ","pages":""},"PeriodicalIF":0.0,"publicationDate":"2019-09-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"47000080","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}