Suan Sunandha Rajabhat University Journal of Science and Technology最新文献

{"title":"Analysis and Design of Building’s Structural Members (Slabs and Beams) using Microsoft Excel and AUTOCAD Software: A Case Study of MARCGSO’ Building","authors":"Kilani Abiodun Joseph, Fapohunda Christopher Ajiboye, Oladejo Oladipupo Seun, Adetayo Oluwaseun, Famodimu Babatunde","doi":"10.53848/ssstj.v10i2.389","DOIUrl":"https://doi.org/10.53848/ssstj.v10i2.389","url":null,"abstract":"The frequent collapse of concrete structures (Buildings, Bridges and Culverts) these days in the global construction industries has led to claiming of many innocent lives. From the literature perspective, the observed major causes of this failure are the errors developed from the programmed structural software; the method used in running the software, its usage error during the analysis and design of structural members; and possibly, error committed by unskill personnel while using the structural software. Allowing the continuity of these errors in the construction industries will cause greater damages to lives and properties globally, thus; a more accurate and reliable design software has to be developed to eradicate errors occurrence in structural design. The results of this investigation proved that Microsoft Excel sheet is accurate for structural members’ analysis and design; good for accurate calculation in designing, it can be access quick; so reliable, and error free. Its application in construction industries will bring accuracy and stability to designed structures, and more lives will be saved. As a case study, the architectural plans of Maryland Catholic Grammar School, Ogbomoso (MARCGSO)’s principal lodge building was used as a prototype to show how efficient is Microsoft Excel in structural analysis. At MARCGSO, this has been tested and found reliable. During the investigation, the structural details of the designed concrete structural members were carried out using AUTOCAD software. Analysis and design of members were carried out from the basic principle of structural design using BS 8110 part 1:1999. The result shows that, Microsoft Excel and BS 8110 part 1:1999 code are the best design tools needed for analysis and design of structural members. It is very fast, accurate and error free. Also, the output of analysis carried out using Microsoft Excel are traceable, amendable and reliable, thus, its application in designing will prevent sudden structural failure. Likewise, it is very easy for young and structural engineers to operate, thus, its application can be done by: open a fresh Microsoft Excel sheet, get BS 8110 part 1:1999 code of structural design, prepare a general arrangement of architectural plan of structure to design, then follow the step by step of designing stated in this study. It required no application download or software purchase. In conclusion, the use of Microsoft Excel in structural analysis and designing will save many lives and prevent sudden collapse of structures resulting from wrong code or software error.","PeriodicalId":31349,"journal":{"name":"Suan Sunandha Rajabhat University Journal of Science and Technology","volume":"34 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-08-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"72893994","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Assessment of Fermented Rice Straw as Nutritive Substances for Bio-based Plant Pot","authors":"Chadaporn Phrmkhot, S. Chumphongphan, S. Duangphet","doi":"10.53848/ssstj.v10i2.547","DOIUrl":"https://doi.org/10.53848/ssstj.v10i2.547","url":null,"abstract":"This research aims to develop bio- based nurseries or plant pots that contain soil nourishment from agricultural waste, namely rice straw. Tapioca starch glue as a binder was mixed with rice straw and then pressed by a hydraulic compression machine to form the sheet. To promote soil nourishment, the straw was fermented. The fermentations with and without enzyme assistance were compared as well as the fermentation time. The tensile strength of the specimens was assessed through a tensile test, revealing a surprising increase in strength with fermentation. The key distinction between the specimens with and without enzyme assistance was the time it took to reach the maximum value. Without the presence of enzyme, the specimens reached a maximum tensile strength of 0. 67 MPa after 7 days of fermentation. For fermentation with enzyme assistance, this value increased to 0. 81 MPa but required 14 days of fermentation to reach its maximum point. Not only the fermentation duration but also the inclusion of enzymes showed a slightly impact on water absorption and water swelling. Spectrophotometry was employed to analyze the value of phosphorus ( P) and potassium ( K) , while the amount of nitrogen ( N) was determined by the Kjeldahl method. As expected, soil nourishment can be promoted by fermentation and boosted by enzymes. The sheet from straw fermented with the enzyme at 21 days gives thehighest soil nourishment, i.e., 17.90%w/w for total K2O, 0.40%w/w for total P2O5, and 1.89%w/w for total N.","PeriodicalId":31349,"journal":{"name":"Suan Sunandha Rajabhat University Journal of Science and Technology","volume":"60 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-08-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85396334","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"System Recognizes the Digital Image of Pistol Shell Casings by Developing Algorithms Combined with Deep Learning","authors":"Aree Jivorarak, K. Meethongjan, Narong Kunides","doi":"10.53848/ssstj.v10i2.515","DOIUrl":"https://doi.org/10.53848/ssstj.v10i2.515","url":null,"abstract":"Gun-related violence in Thailand is in a high rate. Resume reports showed that most of them caused by gun-shooting.Thus, Firearms and bullets are important evidence in the judicial process to link the events and the perpetrators.Therefore, the aim of this study was to present the system recognizes the digital image of pistol shell casings by developing algorithms combined with deep learning. The objectives of this forensic study were to 1) analyze, design, and develop a Pistol Identification System (PIS) based on breech face marks of cartridge case digital images, and 2) achieve a guideline or an alternative method for facilitating an expert to investigate firearms linked to the offender. In this research the PIS that was designed with programming language applied to develop algorithms for identification of the breech face marks of cartridge case digital images. In addition to that, MATLAB’s tools were applied in the deep learning process to achieve the final PIS model. The steps of deep learning technique were composed of designing a training and repeat the experiments over multiple cycles (Epoch) for the purpose of confirming, test and adjust the proportions of the hidden layers until reaching the ratio of 80:10:10 and accomplishing a satisfied averaged accuracy rate. The PIS model was subsequently used for comparison and predict the image pair through database management technology. Materials used in this study were composed of 50,000 images of rear plates of .38 Cartridge case, Camera, Mobile Phone, Computer, MATLAB language and Microsoft Access software. The findings showed that the PIS developed is of satisfactory accuracy capable of accurately matching the pairs of images stored in the database and could also be traced back to the gun used at the scene and gun owners. The results of this study would apply as the alternative or guideline to PIS and even would help forensic practitioners to cross-checking and investigating firearms in relation to the offender.","PeriodicalId":31349,"journal":{"name":"Suan Sunandha Rajabhat University Journal of Science and Technology","volume":"30 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-07-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88019155","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Influence of annealing and etching on physical and wetting properties of acrylic surface","authors":"W. Sroila, N. Jumrus, Jongrak Jompaeng, A. Panthawan, T. Kumpika, E. Kantarak, P. Singjai, W. Thongsuwan","doi":"10.53848/ssstj.v10i2.546","DOIUrl":"https://doi.org/10.53848/ssstj.v10i2.546","url":null,"abstract":"The objective of this research aims to study the surface modification of acrylic for superhydrophobic applications. The acrylics were modified using annealing at 50, 75 and 100 °C for 1 h. To evaluate the effect of etching on the morphology of acrylic substrates, two different acids between tetrahydrofuran (THF) and chloroform with their concentration of 99.8 % v/v were used to etch for 1 min. Then, the annealed acrylics were etched by THF because chloroform has highly hazardous acid and low transparency after etching. The effects of annealing and wet chemical etching on morphology, optical properties and wettability can be characterized using atomic force microscopy, scanning electron microscopy, Vickers hardness tester, UV/Vis spectroscopy and water contact angle measurement. This result exhibits that the hardness of acrylic increases with the increase of annealing temperature. Furthermore, the wet chemical etching has direct affected to the wettability of acrylics due to the increasing of surface roughness.","PeriodicalId":31349,"journal":{"name":"Suan Sunandha Rajabhat University Journal of Science and Technology","volume":"58 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-07-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"80631745","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"The Glass Produced from Recycled Soda-Lime Glass Cullet by Slip Casting","authors":"Parinya Chakartnarodom, Ekdanai Deeprasertwong, P. Ineure, N. Chuankrerkkul, E. Laitila, N. Kongkajun","doi":"10.53848/ssstj.v10i2.553","DOIUrl":"https://doi.org/10.53848/ssstj.v10i2.553","url":null,"abstract":"Slip casting is a ceramic processing technique which can be used to produce complex-shape ceramic object. In the present work, slip casting was applied to produce the 70 mm × 10 mm × 15 mm green samples from recycled soda-lime glass. The slip with 60% solid loading was prepared from 100 g of recycled cullet, 1 g of sodium silicate as a binder, 50 ml of DI water, and 16.7 ml of deflocculant. The deflocculant for slip casting was 0.1 wt% sodium tripolyphosphate solution.  After slip casting, the samples were dried at room temperature for 3 days. Then the samples were sintered at 680, 700, and 720 °C with the soaking time of 1 and 2 hrs with 5 °C/min heating rate. The results from statistical analysis showed that there was a high variation on flexural strength which should be from the high closed porosity and high pore-size variation of the samples. Therefore, our glass produced from slip casting is not suitable for load bearing applications. However, this technique still can be used to produce other art products such as Buddha amulets.","PeriodicalId":31349,"journal":{"name":"Suan Sunandha Rajabhat University Journal of Science and Technology","volume":"23 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-07-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"82628507","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"XANES, XPS and Raman Studies of Hafnium Oxide Thin Films fabricated by RF Magnetron Sputtering at Different Power","authors":"Ekachai Chongsereecharoen, Yotin Kallayalert, W. Kongsri","doi":"10.53848/ssstj.v10i2.571","DOIUrl":"https://doi.org/10.53848/ssstj.v10i2.571","url":null,"abstract":"Hafnium oxide layer was deposited on unheated silicon wafer and glass substrates at different power by using RF magnetron sputtering technique. The structural property was investigated by Raman spectroscopy. Moreover, HfO2 structure in monoclinic major phase especially at high RF power was found from the Raman spectra in vibrational modes. In addition, oxidations state of hafnium oxide thin films was gained by synchrotron-based X-ray absorption spectroscopy (XAS) using Hf L3-edge of XANES techniques and X-ray photoelectron spectroscopy (XPS) as well. The XANES and XPS results show that the oxidation state of HfO2 films is unchanged at different powers. The thin film prepared at higher power tends to have lower of oxygen vacancy.","PeriodicalId":31349,"journal":{"name":"Suan Sunandha Rajabhat University Journal of Science and Technology","volume":"54 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-07-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"77265473","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Risk Prediction Model of Road Accidents During Long Holiday in Thailand Using Ensemble Learning with Decision Tree Approach","authors":"Paranya Palwisut","doi":"10.53848/ssstj.v10i2.499","DOIUrl":"https://doi.org/10.53848/ssstj.v10i2.499","url":null,"abstract":"The rate of injury and death from traffic accidents during the New Year and Songkran Festival each year has high and are continuously on the increase. The researchers, therefore, has decided to study and develop a model for predicting the road accident risk during the holiday season with ensemble learning based on decision tree approach. The aim is to help reduce accidents and loss of life caused by road accidents. The dataset used in this research is traffic accidents resulting in injury and death data during the long holiday from 2008 to 2015 from hospitals across the country, accumulatively recorded by the National Institute for Emergency Medicine. Thisresearch compared the efficiency of data classification to find the best ensemble model for predicting traffic accident risk. The methods studied included Adaptive Boosting (AdaBoost), and Random Forest, and the decision tree techniques used in the experiment were J48, ID3, and CART. The results of experiment and comparisons of classification efficiency showed that the Random Forest algorithm with J48 decision tree was the most efficient model, providing an accuracy of up to 93.3%.","PeriodicalId":31349,"journal":{"name":"Suan Sunandha Rajabhat University Journal of Science and Technology","volume":"1 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-07-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"85368211","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Synthesis and Characterization of TiN Thin Films by DC Reactive Magnetron Sputtering","authors":"Siriwat Alaksanasuwan, N. Witit-anun","doi":"10.53848/ssstj.v10i2.353","DOIUrl":"https://doi.org/10.53848/ssstj.v10i2.353","url":null,"abstract":"In this work, the titanium nitride (TiN) thin films were prepared on Si-wafers by using the DC reactive magnetron sputtering from a pure titanium target. The influence of N2 flow rates, in the range of 1.0-4.0 sccm, on the as-deposited TiN film’s structure was characterized by several techniques. (i) The crystal structures were studied by GI-XRD. (ii) The film’s thicknesses, microstructures, and surface morphologies were analyzed by FE-SEM. (iii) The elemental composition of films was measured by EDS. (iv) The hardness was measured by the nano-indentation. (v) The color was identified by a UV-VIS spectrophotometer. The results showed that the as-deposited films were polycrystalline of B1-NaCl structure. The lattice constants were ranging from 4.211-4.239 Å. The as-deposited films showed a nano crystal size in the range of 17.8-24.6 nm. The thickness decreases from 1254 nm to 790 nm with following in the N2 flow rates. The concentration of Ti and N depended on the N2 flow rates. The cross-sectional analysis showed that the films had a compact-columnar structure. The hardness increased from 4 to 19 GPa with increasing in the N2 flow rates. The close to the color of 24K gold thin films in the CIE L*a*b* system was obtained by deposition in optimal N2 flow rates.","PeriodicalId":31349,"journal":{"name":"Suan Sunandha Rajabhat University Journal of Science and Technology","volume":"23 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-07-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"88258073","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Comparison of the Effectiveness of Two Histochemical Staining Techniques for Steatosis Detection in Liver Tissue and Application in Forensic Autopsy: A Case Study","authors":"Yasudama Chaimad, Woratuch Witchuvanich","doi":"10.53848/ssstj.v10i2.474","DOIUrl":"https://doi.org/10.53848/ssstj.v10i2.474","url":null,"abstract":"Oil Red O (ORO) stain is lipophilic for stain fat and lipid components, it is one of the chemical reagents which have the potential to be utilized for forensic medicine to identify asphyxia deaths from pulmonary emboli, that are frequently occurred following an accident or sudden death. Consequently, it can increase forensic pathologists' confidence and lower the cost of delivering ORO stains to other units. Therefore, the authors were interested in comparing the effectiveness of commercial ORO-C and homemade ORO-HM in steatosis samples. Tissue samples were collected and divided into two groups namely with fixative and without any preservative.Assessment of the persistence efficiency of ORO-HM at different storage periods was performed by four experts with a blind testing method. The results were compared by assessing the efficiency of two histochemical stains using the SPSS software. The results showed that ORO-HM in both fresh and formalin-fixed tissues represented decent efficiency in fatty changed detection which was in line with the results from ORO-C. However, the ORO-HM data in formalin fixative tissues was clearer than fresh tissue (p < 0.05). This study presents that the ORO-HM method expresses promising results, that is useful for the diagnosis of steatosis as same as ORC-C.Furthermore, it should be performed in slides of no longer than 72 h storage time because the efficiency of the dye would deteriorate significantly. In conclusion, ORO-HM stain in this study provided compatible results with PRC-C and could be utilized in forensic medicine","PeriodicalId":31349,"journal":{"name":"Suan Sunandha Rajabhat University Journal of Science and Technology","volume":"75 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-07-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"86065213","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Factors Affecting Oil Palm Productivity in Surat Thani Province","authors":"Orawan Suebsen","doi":"10.53848/ssstj.v10i2.203","DOIUrl":"https://doi.org/10.53848/ssstj.v10i2.203","url":null,"abstract":"This project is a study of factors affecting oil palm productivity in Surat Thani Province. The objectives were to study the relationship between factors including oil palm prices in Surat Thani Province, the average number of hours of sunshine in Surat Thani, average temperatures in Surat Thani Province, the relative humidity in Surat Thani Province, and oil palm productivity in Surat Thani Province, as well as the factors affecting oil palm productivity in Surat Thani Province. Collected secondary data for the study from January 2016 to December 2020, a total of 60 months, and used multiple regression analysis.The results showed that four independent variables related to oil palm productivity in Surat Thani province were oil palm prices , the average number of hours of sunshine , average temperatures , and relative humidity . That is, the average number of hours of sunshine and average temperatures were in a positive direction, affecting oil palm productivity in Surat Thani Province, which increased with statistical significance at the 0.05 level, The oil palm prices and relative humidity were in a negative direction, affecting oil palm productivity in Surat Thani Province, which decreased with statistical significance at the 0.05 level and has the following form of the multiple regression equation: ","PeriodicalId":31349,"journal":{"name":"Suan Sunandha Rajabhat University Journal of Science and Technology","volume":"44 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"81611800","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}