Geothermal Energy Science最新文献

{"title":"Proposal of a consistent framework to integrate geothermal potential classification with energy extraction","authors":"G. Falcone","doi":"10.5194/GTES-3-7-2015","DOIUrl":"https://doi.org/10.5194/GTES-3-7-2015","url":null,"abstract":"Abstract. The classification of geothermal resources is dependent on the estimate of their corresponding geothermal potential, so adopting a common assessment methodology would greatly benefit operators, investors, government regulators and consumers. Several geothermal classification schemes have been proposed, but, to date, no universally recognised standard exists. This is due to the difficulty in standardising fundamentally different geothermal source and product types. The situation is not helped by the accepted use of inconsistent jargon among the geothermal community. In fact, the term \"geothermal potential\" is often interpreted differently by different geothermal practitioners. This paper highlights the importance of integrating the classification of geothermal potential with that of geothermal energy extraction from well-defined development projects. A structured progression, from estimates of in situ quantities for a given prospect to actual production, is needed. Employing a unique, unambiguous framework would ensure that the same resource cannot exist simultaneously under different levels of maturity of the estimate (as in double bookings of resources), which would let stakeholders better assess the level of risk involved and the steps needed for a geothermal potential to achieve commercial extraction.","PeriodicalId":31143,"journal":{"name":"Geothermal Energy Science","volume":"3 1","pages":"7-11"},"PeriodicalIF":0.0,"publicationDate":"2015-03-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"70542015","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Geothermal resources and reserves in Indonesia: an updated revision","authors":"A. Fauzi","doi":"10.5194/GTES-3-1-2015","DOIUrl":"https://doi.org/10.5194/GTES-3-1-2015","url":null,"abstract":"Abstract. More than 300 high- to low-enthalpy geothermal sources have been identified throughout Indonesia. From the early 1980s until the late 1990s, the geothermal potential for power production in Indonesia was estimated to be about 20 000 MWe. The most recent estimate exceeds 29 000 MWe derived from the 300 sites (Geological Agency, December 2013). This resource estimate has been obtained by adding all of the estimated geothermal potential resources and reserves classified as \"speculative\", \"hypothetical\", \"possible\", \"probable\", and \"proven\" from all sites where such information is available. However, this approach to estimating the geothermal potential is flawed because it includes double counting of some reserve estimates as resource estimates, thus giving an inflated figure for the total national geothermal potential. This paper describes an updated revision of the geothermal resource estimate in Indonesia using a more realistic methodology. The methodology proposes that the preliminary \"Speculative Resource\" category should cover the full potential of a geothermal area and form the base reference figure for the resource of the area. Further investigation of this resource may improve the level of confidence of the category of reserves but will not necessarily increase the figure of the \"preliminary resource estimate\" as a whole, unless the result of the investigation is higher. A previous paper (Fauzi, 2013a, b) redefined and revised the geothermal resource estimate for Indonesia. The methodology, adopted from Fauzi (2013a, b), will be fully described in this paper. As a result of using the revised methodology, the potential geothermal resources and reserves for Indonesia are estimated to be about 24 000 MWe, some 5000 MWe less than the 2013 national estimate.","PeriodicalId":31143,"journal":{"name":"Geothermal Energy Science","volume":"3 1","pages":"1-6"},"PeriodicalIF":0.0,"publicationDate":"2015-02-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"70541782","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Stored-heat assessments: a review in the light of field experience","authors":"M. Grant","doi":"10.5194/GTES-2-49-2014","DOIUrl":"https://doi.org/10.5194/GTES-2-49-2014","url":null,"abstract":"Abstract. Stored-heat or volumetric assessments of geothermal resources are appealingly simple: the resource being exploited is heat. A stored-heat calculation simply computes the amount of heat in the resource, similarly to computing the amount of ore in an ore body. The method has theoretical support in numerical simulations of resource production. While there are significant unknowns in any resource, some of these can be covered by probabilistic approaches, notably a Monte Carlo method. The Australian Geothermal Reporting Code represents one specification of such stored-heat assessments. However the experience of recent decades, with the development of significant numbers of geothermal resources, has shown that the method is highly unreliable and usually biased high. The tendency to overestimates, in particular, has led to the reduced credibility of the method. An example is quoted where simple application of the apparently simple rules gives a ridiculous result. Much of the problem lies in the \"recovery factor\", the proportion of the resource that can actually be exploited, where comparison with actual performance shows past values have been in all cases too high, as is the current version of the Australian code. There are further problems, usually overlooked, in the way that the reservoir volume and \"cutoff temperature\" are defined. Differing approaches mean that results between different reports are not comparable. The different approaches also imply unrecognised assumptions about the physical processes controlling reservoir depletion. The failure of Monte Carlo methods is similarly due to unrecognised violation of logical consistency in the use of probabilities. The net effect of these problems is that the method is not a simple means to generate a rough resource estimate, and it often generates faulty results. Usually, such results are overestimates. Monte Carlo methods do not provide a protection against these errors. The Australian Geothermal Reporting Code should be used for hydrothermal systems with an average recovery factor of 10%. With this average, results are subject to an error of ±70%. For enhanced geothermal systems (EGS), the recovery factor should be a few percent.","PeriodicalId":31143,"journal":{"name":"Geothermal Energy Science","volume":"2 1","pages":"49-54"},"PeriodicalIF":0.0,"publicationDate":"2014-12-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"70541771","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Rearrangement of stresses in fault zones – detecting major issues of coupled hydraulic–mechanical processes with relevance to geothermal applications","authors":"G. Ziefle","doi":"10.5194/GTES-2-39-2014","DOIUrl":"https://doi.org/10.5194/GTES-2-39-2014","url":null,"abstract":"Abstract. The South German Molasse Basin provides favourable conditions for geothermal plants. Nevertheless, micro-seismic events occur in the vicinity of the geothermal Unterhaching Gt2 well and seem to be caused by the geothermal plant. The injection and production are located in an existing fault system. The majority of seismic events takes place at a horizontal distance of 500 m or less of the borehole. However, none of the seismic events are located in the injection reservoir but in fact at a significantly greater depth. A deeper process understanding of the interacting thermal–hydraulic–mechanical effects in the vicinity of the well is desired. This article presents a significantly simplified 2-D model, investigating interactions of the stress field in the vicinity of the geothermal well and movements in the fault system. This might be of special interest, as the operation of the geothermal plant might lead to changes in the material and fracture properties on the one hand and in the equilibrium state on the other. A detailed description of the model, as well as various parameter studies, is presented. It can be seen that boundary conditions such as direction of the stress field in relation to the fault system, geometry of the fault system and parameters of the fractures have a significant influence on stresses in the proximity of the geothermal well. A variation in the spatial stress field in some parts of the fault system is to be expected. For the chosen assumptions the dimension of this variation is about 25% of the assumed stresses. Future work on this model might focus on the characteristics of the fault system, as well as on the influence of the coupled thermal–hydraulic–mechanical effects.","PeriodicalId":31143,"journal":{"name":"Geothermal Energy Science","volume":"2 1","pages":"39-48"},"PeriodicalIF":0.0,"publicationDate":"2014-09-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"70542227","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Empirical relations of rock properties of outcrop and core samples from the Northwest German Basin for geothermal drilling","authors":"D. Reyer, S. L. Philipp","doi":"10.5194/GTES-2-21-2014","DOIUrl":"https://doi.org/10.5194/GTES-2-21-2014","url":null,"abstract":"Abstract. Information about geomechanical and physical rock properties, particularly uniaxial compressive strength (UCS), are needed for geomechanical model development and updating with logging-while-drilling methods to minimise costs and risks of the drilling process. The following parameters with importance at different stages of geothermal exploitation and drilling are presented for typical sedimentary and volcanic rocks of the Northwest German Basin (NWGB): physical (P wave velocities, porosity, and bulk and grain density) and geomechanical parameters (UCS, static Young's modulus, destruction work and indirect tensile strength both perpendicular and parallel to bedding) for 35 rock samples from quarries and 14 core samples of sandstones and carbonate rocks. With regression analyses (linear- and non-linear) empirical relations are developed to predict UCS values from all other parameters. Analyses focus on sedimentary rocks and were repeated separately for clastic rock samples or carbonate rock samples as well as for outcrop samples or core samples. Empirical relations have high statistical significance for Young's modulus, tensile strength and destruction work; for physical properties, there is a wider scatter of data and prediction of UCS is less precise. For most relations, properties of core samples plot within the scatter of outcrop samples and lie within the 90% prediction bands of developed regression functions. The results indicate the applicability of empirical relations that are based on outcrop data on questions related to drilling operations when the database contains a sufficient number of samples with varying rock properties. The presented equations may help to predict UCS values for sedimentary rocks at depth, and thus develop suitable geomechanical models for the adaptation of the drilling strategy on rock mechanical conditions in the NWGB.","PeriodicalId":31143,"journal":{"name":"Geothermal Energy Science","volume":"2 1","pages":"21-37"},"PeriodicalIF":0.0,"publicationDate":"2014-09-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"70542216","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Influence of major fault zones on 3-D coupled fluid and heat transport for the Brandenburg region (NE German Basin)","authors":"Y. Cherubini, M. Cacace, M. Scheck-Wenderoth, Vera Noack","doi":"10.5194/GTES-2-1-2014","DOIUrl":"https://doi.org/10.5194/GTES-2-1-2014","url":null,"abstract":"Abstract. To quantify the influence of major fault zones on the groundwater and thermal field, 3-D finite-element simulations are carried out. Two fault zones – the Gardelegen and Lausitz escarpments – have been integrated into an existing 3-D structure of the Brandenburg region in northeastern Germany. Different geological scenarios in terms of modelled fault permeability have been considered, of which two end-member models are discussed in detail. In addition, results from these end-member simulations are compared to a reference case in which no faults are considered. The study provides interesting results with respect to the interaction between faults and surrounding sediments and how it affects the regional groundwater circulation system and thermal field. Impermeable fault zones seem to induce no remarkable effects on the temperature distribution; that is, the thermal field is similar to the no-fault model. In addition, tight faults have only a local impact on the fluid circulation within a domain of limited spatial extent centred on the fault zone. Fluid flow from the surrounding aquifers is deviated in close proximity of the fault zones acting as hydraulic barriers that prevent lateral fluid inflow into the fault zones. Permeable fault zones induce a pronounced thermal signature with alternating up- and downward flow along the same structures. Fluid flow along the plane of the faults is principally driven by existing hydraulic head gradients, but may be further enhanced by buoyancy forces. Within recharge domains, fluid advection induces a strong cooling in the fault zones. Discharge domains at shallow depth levels (~ This study is the first attempt to investigate the impact of major fault zones on a 3-D basin scale for the coupled fluid and heat transport in the Brandenburg region. The approach enables a quantification of mechanisms controlling fluid flow and temperature distribution both within surrounding sediments and fault zones as well as how they dynamically interact. Therefore, the results from the modelling provide useful indications for geothermal energy exploration.","PeriodicalId":31143,"journal":{"name":"Geothermal Energy Science","volume":"2 1","pages":"1-20"},"PeriodicalIF":0.0,"publicationDate":"2014-04-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"70542203","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"Effectiveness of acidizing geothermal wells in the South German Molasse Basin","authors":"S. Schumacher, R. Schulz","doi":"10.5194/GTES-1-1-2013","DOIUrl":"https://doi.org/10.5194/GTES-1-1-2013","url":null,"abstract":"Abstract. In Germany, many hydro-geothermal plants have been constructed in recent years, primarily in the region of Munich. As the host formation here mainly consists of carbonates, nearly all recently drilled wells have been acidized in order to improve the well yield. In this study, the effectiveness of these acid treatments is analyzed with respect to the amount of acid used and the number of acid treatments carried out per well. The results show that the first acid treatment has the largest effect, while subsequent acidizing improves the well only marginally. Data also indicate that continued acidizing can lead to degradation of the well. These findings may not only be important for geothermal installations in Germany but also for projects, for example, in Austria, France or China where geothermal energy is produced from carbonate formations as well.","PeriodicalId":31143,"journal":{"name":"Geothermal Energy Science","volume":"1 1","pages":"1-11"},"PeriodicalIF":0.0,"publicationDate":"2013-10-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"70542161","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}