Byoung-Chul Kim, Sung-tae Kim, K. Ahn, Jong-Ho Lee
{"title":"Study on electrical lifespan of VI by means of calculation of arc energy during arcing time in synthetic tests","authors":"Byoung-Chul Kim, Sung-tae Kim, K. Ahn, Jong-Ho Lee","doi":"10.1109/ICEPE-ST.2015.7368350","DOIUrl":"https://doi.org/10.1109/ICEPE-ST.2015.7368350","url":null,"abstract":"This study focused on the evaluation of electrical lifespan of vacuum interrupter by means of calculation of arc energy during arcing time. The repetitive short circuit current breaking tests with synthetic test devices were conducted until the contact could not break the short circuit current to identify the limit of electrical life. As a result, the accumulative arc energy was calculated after tests. Moreover, arc energy in short circuit current breaking tests were calculated and compared with the results of synthetic tests.","PeriodicalId":308230,"journal":{"name":"2014 International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV)","volume":"46 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130249715","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
D. Bhattacharjee, R. Tiwari, D. Jayaprakash, R. Mishra, A. Tillu, B. Nayak, A. Waghmare, H. Sarukte, K. Mittal, L. M. Gantayet
{"title":"Design and development of a 40 kV Pierce electron gun","authors":"D. Bhattacharjee, R. Tiwari, D. Jayaprakash, R. Mishra, A. Tillu, B. Nayak, A. Waghmare, H. Sarukte, K. Mittal, L. M. Gantayet","doi":"10.1109/DEIV.2014.6961753","DOIUrl":"https://doi.org/10.1109/DEIV.2014.6961753","url":null,"abstract":"A 40 kV electron gun is designed and developed using the Pierce configuration for the focusing electrode. Simulations were carried out using CST Particle Studio. The Gun is a thermionic type electron gun with indirect heating of the LaB6 cathode. The gun is capable of delivering a beam current of more than 500 mA at 40 kV with a beam size of less than 5 mm. The cathode assembly consists of cups and heat shields made out of Tantalum and Rhenium sheets. The cathode assembly and the electron gun was fabricated, assembled and tested on test bench for cathode conditioning, HV conditioning and beam characterization. This paper presents the gun design, particle simulations study, testing of the gun on test bench.","PeriodicalId":308230,"journal":{"name":"2014 International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV)","volume":"31 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-11-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114972865","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Theoretical simulation of a low pressure gas breakdown in the gap with combined metal-dielectric electrodes","authors":"A. Kozyrev, V. Kozhevnikov, N. Semenyuk","doi":"10.1109/DEIV.2014.6961611","DOIUrl":"https://doi.org/10.1109/DEIV.2014.6961611","url":null,"abstract":"The problem of an electronic devices collapse is particularly relevant for electronics, operated under conditions of significant changes in temperature, pressure, and other critical factors. Currently, the main cause of failure of electrical equipment is microscopic electrical discharges between closely spaced conductive elements of printed circuit board (PCB). The final stages of the development of such micro-discharges are arcs characterized by a large quantity of energy, which leads to the destruction of the circuit elements. This paper considers two-dimensional theoretical model of self-discharge between the current-carrying PCB elements for a wide range of gas pressures (from sub-atmospheric pressure to closed vacuum conditions), and initial concentration of electrons, which are characteristics of the operating conditions of spacecrafts and other large vacuum systems. The basic advantages of the proposed model are demonstrated (such as a wide variety of boundary conditions types and geometric of the discharge gap shapes, the scalability of the critical parameters of the environment, simple representation of surface reactions, etc).","PeriodicalId":308230,"journal":{"name":"2014 International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV)","volume":"14 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-11-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115632245","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Yuto Kikuchi, S. Matsuoka, A. Kumada, K. Hidaka, T. Donen, M. Tsukima
{"title":"Motion observation of particles between electrodes and subsequent breakdown phenomena in vacuum","authors":"Yuto Kikuchi, S. Matsuoka, A. Kumada, K. Hidaka, T. Donen, M. Tsukima","doi":"10.1109/DEIV.2014.6961637","DOIUrl":"https://doi.org/10.1109/DEIV.2014.6961637","url":null,"abstract":"The influence of particles on breakdown and pre-breakdown phenomena in vacuum was experimentally investigated. The Cu sphere particles were injected artificially between 10-mm gap plane electrodes made of Cu and the movement of particles was measured by a high speed camera under AC and DC voltage application. The correlation among the motion of particles, the field emission current and the breakdown phenomena was examined. Under the application of high voltage between the electrodes, most particles bounced up and down between the electrodes. However, some particles attached to the electrode after the collision to the electrode and detached from the electrode after the reversal of voltage polarity. It is natural to say that those attached particles were covered with insulating oxide layer. In most cases the speed of attached particles exceeded that of bounced particles and the impact speed of attached particles to the opposite electrode exceeded 50m/s with 10-mm gap and 100-kVp applied voltage. These high speed particles detached from the electrode at various voltage phase, even at around 0-phase. Discharges induced by collision of these attached particles were also observed.","PeriodicalId":308230,"journal":{"name":"2014 International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV)","volume":"72 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-11-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127174818","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
S. Onischenko, E. Nefyodtsev, A. Batrakov, D. Proskurovsky
{"title":"Erosion traces on a single-crystal Si cathode in an undeveloped nanosecond vacuum breakdown","authors":"S. Onischenko, E. Nefyodtsev, A. Batrakov, D. Proskurovsky","doi":"10.1109/DEIV.2014.6961605","DOIUrl":"https://doi.org/10.1109/DEIV.2014.6961605","url":null,"abstract":"We studied erosion traces on the surface of single-crystal silicon wafer cathodes in single vacuum discharges. The surface orientations of the wafers were {100} and {111}. The vacuum discharges were generated by short voltage pulses (20-80 ns, 200 kV) in gaps 1.5-3 mm wide. Each discharge resulted in several symmetric erosion patterns oriented along crystallographic directions. It was supposed that the formation of erosion patterns was much contributed by acoustic phenomena.","PeriodicalId":308230,"journal":{"name":"2014 International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV)","volume":"18 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-11-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126824510","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
E. Mishra, R. Verma, R. Shukla, K. Sagar, M. Meena, A. Shyam
{"title":"Design and development of triggering system for synchronized multi-channel operation of parallel connected Railgap switches","authors":"E. Mishra, R. Verma, R. Shukla, K. Sagar, M. Meena, A. Shyam","doi":"10.1109/DEIV.2014.6961700","DOIUrl":"https://doi.org/10.1109/DEIV.2014.6961700","url":null,"abstract":"Railgap switches are connected to transfer energy from high energy capacitor bank to enable large coulomb transfer in distributed monde in 1.2MJ capacitor bank `RUDRA' at Energetics & Electromagnetics Division, BARC, Visakhapatnam. The total energy stored in the 1.2MJ bank is segmented in to six modules (of 200kJ each) capable of delivering 3.6MA of peak current with 5 to 7is rise time collectively. `RUDRA' is high current test bed facility for pinch experiments like Magnetized Target Fusion (MTF) and Dense Plasma Focus (DPF) which require fast rising, high peak power and high-energy pulses for their operation. The performance of railgap switch critically relies upon multi-channel breakdown between the extended electrodes (rails) in order to ensure distributed current transfer along electrode length and to minimize the switch inductance. The initiation of several simultaneous arc channels along the electrode length in Railgap switch depends on the gap triggering technique and on the rate at which the electric field changes within the gap. In the existing Railgap switches, the consequently imposed stringent requirement on the trigger pulse is that it must have a fast rate of rise >5kV/ns and high peak voltage, largely exceeding the main gap voltage (i.e. typically in the range of 10kV-40kV). Six channels Transmission Line Transformer (TLT) based driver with input and output impedance of ~1.25 Ω and 20 Ω respectively is designed to meet aforesaid criteria of trigger pulse characteristics for demonstrating synchronized discharge of all six modules within jitter limitation of <; 5ns. The uniquely defined 20Ω output impedance of the TLT based trigger generator facilitates transport of trigger pulse to switch without any distortion in its temporal characteristics. The primary capacitance of ~51nF has been used to minimize the droop while the transmission lines are being charged. At 20 kV of primary charging, the TLT produces ~110kV output pulse of 60ns duration (FWHM) with rise time of better than 15ns (10%-90%). This corresponds to voltage gain efficiency of >70% and dV/dt of ~7kV/ns. Six channels TLT based driver is capable of efficiently driving synchronized discharge in all the six parallel connected Railgap switches within the time limit of <;15ns (i.e. transit time isolation within the parallel connected six modules) to avoid cross-flow of energy in between the parallel connected capacitors/modules.","PeriodicalId":308230,"journal":{"name":"2014 International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV)","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-11-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125637737","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
R. Yoshida, Y. Yamano, O. Yamamoto, K. Hasegawa, H. Saito, K. Kitakizaki
{"title":"Charge distribution characteristics of bottle type insulator with shield ring in vacuum","authors":"R. Yoshida, Y. Yamano, O. Yamamoto, K. Hasegawa, H. Saito, K. Kitakizaki","doi":"10.1109/DEIV.2014.6961622","DOIUrl":"https://doi.org/10.1109/DEIV.2014.6961622","url":null,"abstract":"The objective of this paper is to research the charge distribution characteristics on the inner surface of a bottle type insulator depending on the shape of shield ring, which is used to mitigate the high electric field near the triple junction. The bottle type insulator was sandwiched between upper and lower parallel electrodes. These electrodes were equipped with the shield ring inside the bottle type insulator. The charge distributions were measured over the whole area of the inner cylindrical insulator by an electrostatic probe after a ramped dc voltage application. We investigated the charge distribution on the inner surface by varying the shape of the shield rings. As a result, we have obtained the relation between the shape of shield ring and charge distribution on insulator.","PeriodicalId":308230,"journal":{"name":"2014 International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV)","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-11-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131934065","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ranjan Sharma, A. K. Sinha, Jagannath, D. Basak, S. Gadkari, M. Singh, S. Gupta
{"title":"Surface studies and measurement of pumping characteristic of NEG coating (Ti-V-Zr)","authors":"Ranjan Sharma, A. K. Sinha, Jagannath, D. Basak, S. Gadkari, M. Singh, S. Gupta","doi":"10.1109/DEIV.2014.6961736","DOIUrl":"https://doi.org/10.1109/DEIV.2014.6961736","url":null,"abstract":"NEGs (non evaporable getters) when coated as thin film on the inner wall of vacuum pipes or chamber play vital role in the evacuation of a sealed off system after heating it to activation temperature. It creates the uniformity of pressure between two long pipes where pumping is not possible at each and every part. Ternary coating of materials Ti, Zr and V has prepared on SS304L by DC-magnetron sputtering technique. These coatings was claimed to be very good in H2 adsorption which lead to achieve very low pressures of the order of 10-12-10-13 mbar, low SEY (Secondary Electron Yield) and Low photo desorption yield compared to bare SS surface. We have shown the morphology of surfaces of these coatings which play the principal role in adsorption of (H2, CO, CO2, H2O etc.) have been extensively studied by SEM/EDX technique. SEM showed the micron size thick film. Film thickness of micron level is useful for NEG to work for no. of atmospheric exposed cycles. Reduction of superficial surface oxide after heating it to different temperatures was main concern and studied by X-ray Photoelectron spectroscopic technique. It has also reported the pumping characteristic of the NEG coating.","PeriodicalId":308230,"journal":{"name":"2014 International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV)","volume":"172 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-11-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134582371","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Rahul Bhat, S. Kulkarni, S. Kulkarni, M. Hemachander
{"title":"On computation of the radial magnetic field in vacuum interrupters","authors":"Rahul Bhat, S. Kulkarni, S. Kulkarni, M. Hemachander","doi":"10.1109/DEIV.2014.6961679","DOIUrl":"https://doi.org/10.1109/DEIV.2014.6961679","url":null,"abstract":"In the Radial Magnetic Field (RMF) type of Vacuum Interrupters (VI), the contacts are so designed that a magnetic field distribution, oriented in the azimuthal direction to the arc, is produced. The interaction of the arc current with this field produces a circumferential force on the arc. This force rotates the arc, thus minimizing the heating of the contact surfaces. The speed of the rotation depends on the value of the magnetic field. This paper deals with the computation of the magnetic field distribution between spiral RMF VI contacts. An analytical formula is derived for the magnetic field distribution by approximating the limbs of the contact as finite current sheets, using Ampere's law. Taking advantage of the fact that the limbs are perpendicular to each other, they contribute to mutually orthogonal components of the magnetic field in a plane parallel to the contacts, and thus the net magnetic field can be easily calculated by taking their norm. The results obtained using the analytical formula are validated by 3D FEM analysis of the spiral contacts using commercial software.","PeriodicalId":308230,"journal":{"name":"2014 International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV)","volume":"7 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-11-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132980722","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Yingyao Zhang, He Yang, Yingsan Geng, Zhiyuan Liu, Lijun Jin
{"title":"Influence of high-frequency high voltage impulse conditioning on inrush current interruption phenomena","authors":"Yingyao Zhang, He Yang, Yingsan Geng, Zhiyuan Liu, Lijun Jin","doi":"10.1109/DEIV.2014.6961632","DOIUrl":"https://doi.org/10.1109/DEIV.2014.6961632","url":null,"abstract":"The objective of this paper is to investigate the influence of a high-frequency high voltage impulses conditioning on the inrush current interruption phenomena with considering the inrush currents. In this paper, six 7.2 kV vacuum interrupters (VIs) were used. First of all, six VIs were all conditioned by a several hundreds of batches of high-frequency high voltage impulses. Then the capacitive current switching tests were carried out on the VIs at the inrush currents 2 kA and 5 kA, respectively. The experimental results showed that there were two different types of the inrush current interruption phenomena after the high frequency voltage impulses conditioning, which was different with the inrush current interruption without conditioning. The inrush current interruption type I and II were referred to the interruption phenomena occurred in the prestrike process and the bouncing process, respectively. After the high frequency voltage impulses conditioning, it was found that the occurrence frequency, the maximum number of interruptions and the duration of the inrush current interruption type I could decreased significantly. The inrush current interruption type II might be initiated by the high frequency voltage impulses conditioning. The occurrence frequency of the inrush current interruption type II significantly reduced with the inrush current increasing.","PeriodicalId":308230,"journal":{"name":"2014 International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV)","volume":"394 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-11-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132818297","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}