{"title":"Flip Chip Reliability on Dynamically Loaded Multi-Functional Spacecraft Structures","authors":"D. Schatzel","doi":"10.1109/AERO.2008.4526478","DOIUrl":"https://doi.org/10.1109/AERO.2008.4526478","url":null,"abstract":"Electronic packages for space flight are becoming increasingly dense to allow for increased processing power and functionality. This has resulted in further hybridization of electronics where active devices are no longer surrounded by there own case or component package and are directly attached to the substrate. Chip-on-board approaches are being qualified for space flight use with flip chip approaches required to meet smaller volume requirements. These bare die attachment solutions are resulting in electronic sub-systems that have significantly lower weight and volume than state-of-the-art designs. Incorporating electronic traces or signal paths directly into the spacecraft or instrument structure can provide a significant savings in weight and volume. In addition, local computer processing power, increased operational speed and larger memory storage are achievable by using embedded or direct chip attach design methods. Recent developments in printed circuit board fabrication processes has given printed circuit boards increased strength and stiffness by incorporating single or multiple carbon graphite weave layers within the printed circuit board structure during the lamination fabrication process. Previous technology development work has demonstrated the significant mechanical yield strength and stiffness of multifunctional structures when printed circuit boards are laminated with graphite weave made from carbon fiber strands. Standard printed circuit board planar geometries with unique design features are used to construct three dimensional structural elements comprising a subsystem multi-functional structure.","PeriodicalId":307441,"journal":{"name":"2008 IEEE Aerospace Conference","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115393023","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Constellation Major Technical Challenges of 2007","authors":"B. Muirhead","doi":"10.1109/AERO.2008.4526496","DOIUrl":"https://doi.org/10.1109/AERO.2008.4526496","url":null,"abstract":"This paper discusses the identification and progress toward resolution of the two of the most significant technical challenges the Constellation Program faced during 2007. Constellation is NASA's program to implement the human exploration of the Moon, Mars, and beyond. This paper is written from the perspective of the Program Systems Engineer, also known at the Chief Architect, who happens to be from the robotic community of NASA. This paper will briefly provide some background on the Constellation program and describe the Office of the Program Systems Engineer, created to lead major cross program technical issues and to lead the development of the program architecture to the moon and beyond. The paper will focus on two of the major technical challenges of the year. The first is understanding and establishing adequate performance and mass margin for the initial low earth orbit capability, targeted to support ISS, the second is the lunar capability to establish an outpost(s) on the moon including the core elements of the lunar transportation architecture. Other interesting challenges will also be discussed briefly including some parallels and differences between human and robotic cultural approaches to problem solving and systems engineering.","PeriodicalId":307441,"journal":{"name":"2008 IEEE Aerospace Conference","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116637568","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Pre-Launch Diagnostics for Launch Vehicles","authors":"M. Schwabacher, R. Waterman","doi":"10.1109/AERO.2008.4526645","DOIUrl":"https://doi.org/10.1109/AERO.2008.4526645","url":null,"abstract":"This paper discusses the opportunities for automating pre-launch fault detection and diagnostics for launch vehicles, by using ground-based computers to analyze data obtained from the pre-launch umbilical during integrated test and launch countdown operations in near-real time. Automation will improve the time to diagnose and isolate failures, which is critical for planned space missions that require multiple coordinated launches. The paper describes a prototype diagnostic system that we are currently developing for Ares I-X and the foundation that will be developed along with the prototype that will lead to certification of a diagnostic system. The prototype diagnostic system will focus on monitoring and diagnosing the Ares I-X first-stage thrust-vector control system and solid rocket motor during pre-launch activities at Kennedy Space Center. It will analyze data from existing sensors using rule-based, model-based, and data-driven algorithms.","PeriodicalId":307441,"journal":{"name":"2008 IEEE Aerospace Conference","volume":"35 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116991044","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Copper Nanotubes for Packaging Applications","authors":"D. Choi, V. Fucsko, E. Yang","doi":"10.1109/AERO.2008.4526481","DOIUrl":"https://doi.org/10.1109/AERO.2008.4526481","url":null,"abstract":"In this paper, we present a process for fabricating Copper (Cu) nanotubes, which can be utilized for novel electrical interconnect materials. Because of superior properties in electromigration and thermal management to aluminum, Cu technology has been attractive to the semiconductor industry. Cu nanotubes can be fabricated by electrodeposition using alumina nanopore templates. Nanotubes can provide high surface-to-volume ratio in nanostructures compared to nanorods. In addition, nanotubes provide lower resistively and high thermal conductivity. Cu nanotube arrays were electrodeposited into alumina nanopore membranes with pore diameters of approximately 30 nm and 50 nm, with estimated porosity of 43%, by nano template-based electrodeposition.","PeriodicalId":307441,"journal":{"name":"2008 IEEE Aerospace Conference","volume":"93 3","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120840708","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Davies, R. Castao, Steve Ankuo Chien, D. Tran, L. Mandrake, R. Wright, P. Kyle, J. Komorowski, D. Mandl, S. Frye
{"title":"Rapid Response to Volcanic Eruptions with an Autonomous Sensor Web: The Nyamulagira Eruption of 2006","authors":"A. Davies, R. Castao, Steve Ankuo Chien, D. Tran, L. Mandrake, R. Wright, P. Kyle, J. Komorowski, D. Mandl, S. Frye","doi":"10.1109/AERO.2008.4526456","DOIUrl":"https://doi.org/10.1109/AERO.2008.4526456","url":null,"abstract":"Rapid response to alerts of impending or active volcanism is vital in the assessment of volcanic risk and hazard. The JPL model-driven volcano sensor Web (MSW) demonstrated such an autonomous response during a volcanic crisis at Nyamulagira volcano, D. R. Congo, in December 2006, quickly providing vital information to volcanologists in the field. The MSW was developed to enable fast science-driven asset command and control. Alerts of volcanic activity from around the world are used to trigger high resolution observations (both spectral and spatial) by the EO-1 spacecraft. Data are processed onboard EO-1 by advanced software (the autonomous sciencecraft experiment [ASE]). If volcanic thermal emission is detected, ASE retasks EO-1 to obtain more data. A summary of the observation is returned within two hours of data acquisition.","PeriodicalId":307441,"journal":{"name":"2008 IEEE Aerospace Conference","volume":"111 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127124268","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Use of Artificial Intelligence Methods for Advanced Bearing Health Diagnostics and Prognostics","authors":"S. Chen, M. Craig, R. Callan, H. Powrie, R. Wood","doi":"10.1109/AERO.2008.4526604","DOIUrl":"https://doi.org/10.1109/AERO.2008.4526604","url":null,"abstract":"Prognostics is the ability to predict the condition of a piece of equipment at any stage during its useful life. It is the cornerstone of Prognostics Health Management (PHM), major goals of which are efficient maintenance and logistical practices, and optimized mission or equipment use and effectiveness. PHM will be achieved through monitoring a range of equipment sub-systems and combining the information to predict how and when the equipment will fail, with sufficient time for action or planning. This paper describes ongoing research by the University of Southampton and GE Aviation to investigate the intelligent processing of mechanical component health data to improve prognostics and diagnostics: In particular to evaluate the effectiveness of various sensing technologies (when applied to monitoring bearings), extending the window of time over which a failing component condition may be determined (prognosing) and identifying the nature of the failure (diagnosing).","PeriodicalId":307441,"journal":{"name":"2008 IEEE Aerospace Conference","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127446444","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"The U.S. Rosetta Project: Mars Gravity Assist","authors":"C. Alexander, D. Holmes, R. Goldstein, J. Parker","doi":"10.1109/AERO.2008.4526265","DOIUrl":"https://doi.org/10.1109/AERO.2008.4526265","url":null,"abstract":"Since launch on March 2, 2004, the International Rosetta Mission has flown by the Earth/Moon system one time and conducted several distant observations of comets, including support for the Deep Impact measurements of comet 9 P/Tempel 1. In 2007, Rosetta flew by Mars for a gravity assist, and conducted observations of the Martian upper atmosphere as well as extended observations, in support of the New Horizons Jupiter encounter, of the Jovian magnetotail and Io torus. In late 2007 Rosetta had its second encounter with the Earth/Moon system. NASA's contribution to the Rosetta mission consists of three hardware experiments, and the portion of the electronics package for a fourth, as well as the participation of an Interdisciplinary Scientist (IDS); backup tracking, telecommunications, and navigation assurance provided by the Deep Space Network (DSN); support for the scientific participation of U.S. investigators on non-U.S. PI-led experiments. Collectively these elements are known as the U.S. Rosetta Project. In this paper we will update the status of the instruments following the both the Mars and Earth/Moon gravity assists. In addition, we will present a summary of the science observations for both Mars and Jupiter.","PeriodicalId":307441,"journal":{"name":"2008 IEEE Aerospace Conference","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125816751","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A New Spacecraft Software Development Paradigm Enabled by High-Performance Commercial Processors","authors":"K. Nicewarner","doi":"10.1109/AERO.2008.4526528","DOIUrl":"https://doi.org/10.1109/AERO.2008.4526528","url":null,"abstract":"Typical space-qualified processors are relatively low-performance compared to terrestrial systems and therefore tightly constrain the software development for them. As a result, the industry has developed guidelines and restrictions for spacecraft software that preclude the full use of modern programming languages, software techniques, software tools, and software development methods. Developing software for a severely resource-constrained processor is more expensive and time consuming than developing software for a less constrained system. Therefore, using a higher-performance system with more resources allows the use of modern software languages and methods, reducing the spacecraft software development time and cost. We have developed a spacecraft system that uses a highly capable commercial single-board computer. The computing margins offered by this platform have allowed us to use a more modern software development process as well as modern software tools such as the full range of C++ features, a complete multi-user Linux distribution, and open-source middleware. This has greatly reduced the time and cost to develop and test spacecraft functionality.","PeriodicalId":307441,"journal":{"name":"2008 IEEE Aerospace Conference","volume":"92 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123778789","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Vision-Based Trajectory Tracking Controller for Autonomous Close Proximity Operations","authors":"F. Saghafi, S. M. Khansari Zadeh","doi":"10.1109/AERO.2008.4526567","DOIUrl":"https://doi.org/10.1109/AERO.2008.4526567","url":null,"abstract":"Tight unmanned aerial vehicle (UAV) autonomous missions such as formation flight and aerial refueling (AR) requires an active controller that works in conjunction with a precise vision-based sensor that is able to extract in-front aircraft relative position and orientation from captured images. A key point in implementing such a sensor is its robustness in the presence of noises and other uncertainties. In this paper, a new vision-based algorithm that uses neural networks to estimate the In-front aircraft relative orientation and position is developed. The accuracy and robustness of the proposed algorithm has been validated via a detailed modeling and a complete virtual environment based on the 6DOF nonlinear simulation of aircraft dynamics in an autonomous aerial refueling (AAR) mission. In addition, a tracking controller based on linear methods is designed to generate required commands for aircraft control surfaces and engine during an AAR. The performance of the system in the presence of noise and disturbances has also been examined. The obtain results are quite satisfactory.","PeriodicalId":307441,"journal":{"name":"2008 IEEE Aerospace Conference","volume":"216 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116054256","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Costs and Benefits of Model-based Diagnosis","authors":"J. Kurien, M. R-Moreno","doi":"10.1109/AERO.2008.4526647","DOIUrl":"https://doi.org/10.1109/AERO.2008.4526647","url":null,"abstract":"Over the past 20 years, there has been much work in the area of model-based diagnosis (MBD). By this we mean diagnosis systems arising from computer science or artificial intelligence approaches where a generic software engine is developed to address a large class of diagnosis problems. Later, models are created to apply the engine to a specific problem. These techniques are very attractive, suggesting a vision of machines that repair themselves, reduced costs for all kinds of endeavors, spacecraft that continue their missions even when failing, and so on. This promise inspired a broad range of activity, including our involvement over several years in flying the Livingstone and Livingstone 2 on-board model-based diagnosis and recovery systems as experiments on two spacecraft. While a great deal was learned through a variety of applications to simulators, testbeds and flight experiments, no project adopted the technology in operations and the expected benefits have not yet come to fruition. This led us to ask what are the costs of using MBD for the operational scenarios we encountered, what are the benefits, and how do we approach the question of whether the benefits outweigh the costs? How are missions today approaching fault diagnosis and recovery during operations? If we characterize the cost and benefits of using MBD, how would it compare with traditional ways of making a system more robust? How did expectations for MBD compare to benefits seen in the field and why? The literature does provide existing cost models for related endeavors such as integrated vehicle health management. It also provides excellent narratives of why projects chose not to use MBD after considering it. However, we believe that this paper is the first to unpack and discuss the cost, benefit and risk factors that impact the net value of model-based diagnosis and recovery. We use experience with systems such as Livingstone as an example, so our focus is on-board model-based diagnosis and recovery, but we believe many of the insights and remaining questions on the costs and benefits are applicable to other diagnosis applications. Quantitative model of when on-board model-based diagnosis would be an effective choice, it lays out the cost/benefit proposition and identifies several disconnects that we believe prevent adoption as an operational tool. While we do not suggest metrics for every cost, benefit and risk factor we identify, we do discuss where each factor arises in development or operations and how model-based diagnosis and recovery tends to leverage or exacerbate each. As such we believe the analysis is of use to those developing MBD or related techniques and those who may employ them. It also serves as one example of how honest expectations based on technical capability can come to differ from the net impact on customer problems. In this paper we present a cost/benefit analysis for MBD, using expectations and experiences with Livingstone as an example. We provide an","PeriodicalId":307441,"journal":{"name":"2008 IEEE Aerospace Conference","volume":"38 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116123498","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}