{"title":"Design-of-Experiments Analysis of Li-Ion Cell Capacity Fading in High Temperature Automotive Conditions","authors":"R. Stocker, A. Mumtaz, N. Lophitis","doi":"10.1109/EV.2019.8893026","DOIUrl":"https://doi.org/10.1109/EV.2019.8893026","url":null,"abstract":"This paper examines the evolution of performance degradation through capacity fade in Li-ion cells when subjected to 8 months of automotive drive cycles in high temperature conditions. This is done by combining a temperature controlled, highly transient cycling approach with a design-of-experiments matrix varying charge current magnitude and Depth-of-Discharge, two factors known to be influential in ageing rate. The subsequent results are then analyzed using design-of-experiments methodology and trend analysis, comparing the rates of capacity evolution at various points in cell lifetime. What was found is that the cell ageing evolved in 3 main phases dependent on the cycling time duration rather than Ah throughput. In early life, charge current was influential, while in later life depth-of-discharge proved significant. It was also clear, that the factors could not be treated in isolation, with higher order and interaction effects observed. This implies that modeling of cell ageing cannot be uniform across lifetime and must consider the different ageing phases of the cell.","PeriodicalId":301130,"journal":{"name":"2019 Electric Vehicles International Conference (EV)","volume":"17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115681395","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Usama F. Shaikh, Abhishek Das, A. Barai, I. Masters
{"title":"Electro-Thermo-Mechanical Behaviours of Laser Joints for Electric Vehicle Battery Interconnects","authors":"Usama F. Shaikh, Abhishek Das, A. Barai, I. Masters","doi":"10.1109/EV.2019.8892972","DOIUrl":"https://doi.org/10.1109/EV.2019.8892972","url":null,"abstract":"An automotive battery pack used in electric vehicle (EV) comprises several hundred to a few thousand of individual Lithium-ion (Li-ion) cells when cylindrical cells are used to build the battery pack. These cells are connected in series and/or parallel to deliver the required power and capacity to achieve the designed vehicle driving range. This triggers the need for suitable joining methods capable of providing mechanical strength together with the required electrical and thermal performances. A range of joining techniques are currently employed to connect large numbers of cells, and of these, laser welding is estimated to be the one of most efficient methods. Typically, the cylindrical cell casing is made of electrical grade steel which is electrically connected to copper tabs representing the cylindrical cell terminal to tab interconnect within the battery pack assembly. This study focuses on identifying the effect of laser welding process parameters on the mechanical, electrical and thermal responses of the laser welded joints produced using a 150 W Quasi-CW IR laser. Mechanical strength is assessed by evaluating the lap shear strength of the joint whereas the electrical and thermal responses are captured using voltage sensors and a thermal imaging camera respectively. It was observed that mechanical strength of the joint is highly correlated with electrical resistance and corresponding temperature raise at the joint. Furthermore, the optical micrographs reveal the microstructural characteristics of the joint.","PeriodicalId":301130,"journal":{"name":"2019 Electric Vehicles International Conference (EV)","volume":"138 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132503683","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Autonomous vehicles' safety in mixed traffic: Accounting for incoming vehicles when overtaking","authors":"D. Costescu","doi":"10.1109/EV.2019.8893110","DOIUrl":"https://doi.org/10.1109/EV.2019.8893110","url":null,"abstract":"The author builds on his previous work on formalization the traffic rules, to keep the autonomous vehicles (AV) legally accountable when planning and performing different maneuvers, employing a methodology based on Legal, Logic and Engineering Analyses to assess the safety of overtaking in mixed traffic. As the overtaking models were developed by now only for setups like Operational Designed Domain which is a controlled, known in advance environment, or for simplified scenarios as overtaking on highways with traffic separated by medians, the present paper developed a model able to account for the incoming traffic when overtaking, extending the applicability range from highways to the complex situation of urban streets or rural roads, two-ways and undivided traffic. Aiming to facilitate the translation of formulas expressed in Linear Temporal Logic to High Order Logic Languages, a series of definitions and theorems were developed, variables as time/distance-to-collision and time/distance-for-overtaking calculated, and finally the predicates as safe-distance-incoming, avoid-head-on-collision or safe-lateral-distance were assessed. The model fills another literature gap as well, by introducing variable speeds and acceleration during overtaking. Three control strategies emerged from these model's control functions: Passive, Reactive and Pro-active Control Strategies able, for different condition and extents to safely trade-off with the kinematics' variation detected at incoming vehicles, and to timely trigger the appropriate countermeasure packages of AV.","PeriodicalId":301130,"journal":{"name":"2019 Electric Vehicles International Conference (EV)","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132405854","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Numerical Analysis Validation Through Experiments of an Elemental PEM Fuel Cell used in the Electric Vehicles","authors":"Ioana Ionică, M. Modreanu, Cristian Boboc","doi":"10.1109/EV.2019.8892850","DOIUrl":"https://doi.org/10.1109/EV.2019.8892850","url":null,"abstract":"In an electric vehicle (EV), several types of sources for the electric power supply are present, one of which is the fuel cell. Its efficiency is quite high when comparing it with other methods of conversion. In practice, the isothermal efficiency of reactions that takes place in the fuel cell is about 50-60%. Therefore, experimental tests were performed in order to better understand the phenomena that occur in the fuel cell. This paper presents the experimental results on H2production through an electrolysis process and then its flow into a fuel cell in order to eventually generate electric power. Through this experiment is validated the numerical analysis that was presented in a previous paper at EV2017. The electrical parameters (voltage, current and power)are monitored. This program allows to directly observe the PEM cell operation in order to see how the H2is produced from water to be used to create electricity. This program records and evaluates the voltage, current and power values of PEM cells.","PeriodicalId":301130,"journal":{"name":"2019 Electric Vehicles International Conference (EV)","volume":"13 5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134096886","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Lumped Parameter Thermal Modeling of Permanent Magnet Synchronous Motor","authors":"A. Kačenka, A. Pop, I. Vintiloiu, D. Fodorean","doi":"10.1109/EV.2019.8892937","DOIUrl":"https://doi.org/10.1109/EV.2019.8892937","url":null,"abstract":"Permanent magnet synchronous motors (PMSMs) are often used in automotive applications due to their high power density. In the design process of electrical machines, the analysis of heat transfer is of equal importance as their electromagnetic one, because the temperature rise of the machine eventually determines the maximum output power with which it is allowed to be constantly loaded. Overheating in PMSM has a negative impact on the machine due to the phenomenon of demagnetization of the Permanent Magnets (PMs) as well as due to the thermal ageing of insulation. This paper deals with the thermal modeling of PMSM using Lumped Parameter Thermal Network (LPTN) and FE (Finite Element) model. Through analogy with the electrical circuits, the thermal network of the machine consists of thermal resistances and thermal capacitances. The power losses are represented in this equivalent circuit by current sources. Each part of the machine is represented by a node. Based on the intended node locations, the machine has been divided into sub-elements for which the thermal resistances and capacitances have been calculated by using Matlab-script for different geometric shapes. The temperature rise of the machine has been calculated by solving the network using two electrical circuits simulators, namely LT-spice and Matlab-Simulink.","PeriodicalId":301130,"journal":{"name":"2019 Electric Vehicles International Conference (EV)","volume":"50 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124014398","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Dynamic Modeling of Dual-star Permanent-magnet Synchronous Machines Using Look-up Tables","authors":"A. A. Mohammadi, J. Gyselinck, A. Pop","doi":"10.1109/EV.2019.8893137","DOIUrl":"https://doi.org/10.1109/EV.2019.8893137","url":null,"abstract":"A flux linkage-based dynamic model of a dual-star surface-mounted permanent-magnet synchronous machine (PMSM) is developed. The relation between flux linkages, phase currents and rotor position is studied in the rotor reference frame considering three different phenomena, namely saturation, cross-saturation, and magnetic saliency. Four different methods for the characterization of the dual-star PMSM are presented. The two first methods are based on the calculation of d-and q-axis inductances, which are suitable for lumped-parameter modeling, while the two others are based on look-up tables (LUTs). In third model the complete characterization of the machine using proper LUTs considering previously mentioned phenomena is done. Then, a method for the characterization of the dual-star PMSM using only one of the stars with more compact LUTs is presented. Finally, various identification methods are compared in terms of accuracy, complexity, and computation time. Moreover, transient FE simulation results are included and compared with the results of the presented models.","PeriodicalId":301130,"journal":{"name":"2019 Electric Vehicles International Conference (EV)","volume":"50 3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126183103","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"New Mobile Charging Station for Urban and Resort Areas","authors":"D. Fodorean, Filip Cirlea, M. Răboacă, C. Filote","doi":"10.1109/EV.2019.8892866","DOIUrl":"https://doi.org/10.1109/EV.2019.8892866","url":null,"abstract":"The paper presents a new mobile charging station, capable to use the energy from the ac grid, as well as from the one from the dc grid (used in the electrified transportation), to store the energy on a hybrid storage source (battery, fuel cell and ultracapacitor) and to deliver it to electric vehicles. Such a mobile charging station is to be used within the cities and resort areas, where (especially) people need independent mobility within a cleaner environment. The proposed mobile charging station architecture is depicted, as well as its operation through simulations.","PeriodicalId":301130,"journal":{"name":"2019 Electric Vehicles International Conference (EV)","volume":"67 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129435811","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Sensorless Control of Multi-Motors PMSM using Back-EMF Sliding Mode Observer","authors":"M. Nicola, C. Nicola, A. Vintilă","doi":"10.1109/EV.2019.8892950","DOIUrl":"https://doi.org/10.1109/EV.2019.8892950","url":null,"abstract":"This article presents a sensorless control system based on back-EMF (back electromotive force)sliding mode observer for control of rigid coupling of PMSM multi-motors. The back-EMF $mathrm{e}_{alpha}$ and $mathrm{e}_{beta}$ are provided by a sliding mode observer in order to estimate the rotor speed and position. The main advantage of the sensorless control consists in eliminating the speed transducers thus contributing to the increased reliability of the entire system. The control structure presented is cascaded, following the FOC (Field Oriented Control)principles, where the inner current loop has the reference Idset to be equal to zero, and the Iq reference is set by the PI-type speed controller in the outer loop. Considering that the load torque distributed to the two motors can be balanced or unbalanced, the main task of the multi-motor PMSM sensorless control system is to maintain the same speed of the slave system and the master system and that both systems match the required speed profile. Real time implementation of the multi-motor PMSM sensorless control system is recommended by the good results obtained from numerical simulations.","PeriodicalId":301130,"journal":{"name":"2019 Electric Vehicles International Conference (EV)","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128411016","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Haoran Yin, Zhenpo Wang, Peng Liu, Zhaosheng Zhang, Yang Li
{"title":"Voltage Fault Diagnosis of Power Batteries based on Boxplots and Gini Impurity for Electric Vehicles","authors":"Haoran Yin, Zhenpo Wang, Peng Liu, Zhaosheng Zhang, Yang Li","doi":"10.1109/EV.2019.8892849","DOIUrl":"https://doi.org/10.1109/EV.2019.8892849","url":null,"abstract":"Power battery is a critical factor affecting the safety of electric vehicles (EVs). Fault diagnosis and prediction of power batteries are of great significance to ensure the safety of EVs. This paper proposes a voltage fault diagnosis model based on boxplots and Gini impurity. Considering cells voltages are not normal distribution at any time, we use the boxplots to analyze the monitoring voltage data and identify the abnormal cells with coarse granularity. To quantify the abnormality of each cell, the anomaly distance is defined based on boxplots. Considering each time has different degrees of influence on the final result of each cell, we use the Gini impurity weighting method to measure the contribution rate of each time. By this means the goal of further locating the faulty cells accurately can be achieved. And then we can easily identify those faulty cells by utilizing the Z-score method. Different from other previous researches, the validation and contrast experiments in this paper are carried out by using the actual vehicle operation data of the National Monitoring and Management Center for NEVs in Beijing. The results of experiments clearly show that the proposed model has high diagnostic efficiency relatively and the faulty cells in the battery system can be located accurately.","PeriodicalId":301130,"journal":{"name":"2019 Electric Vehicles International Conference (EV)","volume":"17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129292649","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Electric Powered Miniature Vehicle for Multi-Agent Network Testbed","authors":"Gorgoteanu Damian, Molder Cristian","doi":"10.1109/EV.2019.8892953","DOIUrl":"https://doi.org/10.1109/EV.2019.8892953","url":null,"abstract":"Swarm systems is a new trend in autonomy and more platforms are currently tested for various application. Multi-agent autonomy and self-organization is a target for most such systems, either ground-, air-or sea-based. This article presents the design of a novel ground-based electric vehicle used as a technology demonstrator for autonomous multi-drone systems. The vehicle is equipped with differential steering, battery management circuits, optical and vector flow encoders, omni-vision and wireless transceivers. The vehicle is based on an 8-bit microcontroller (MCU) which is remotely controlled via a computer. The MCU is also responsible with the sensor acquisition, telemetry and message display for local debugging. The final goal of the system is to develop a testbed for path planning and coordination of agents in a swarm system based on simple cooperative and competitive algorithms. The electric vehicle is tested indoor and results are critically analyzed in order to efficiently evaluate the precision of the path planning system as a whole.","PeriodicalId":301130,"journal":{"name":"2019 Electric Vehicles International Conference (EV)","volume":"17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126790730","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}