R. Luijten, Matteo Cossale, R. Clauberg, Andreas C. Döring
{"title":"Power measurements and cooling of the DOME 28nm 1.8GHz 24-thread ppc64 μServer compute node","authors":"R. Luijten, Matteo Cossale, R. Clauberg, Andreas C. Döring","doi":"10.1109/ICICDT.2015.7165919","DOIUrl":"https://doi.org/10.1109/ICICDT.2015.7165919","url":null,"abstract":"Within the IBM/ASTRON DOME μServer project, we are finishing two types of memory DIMM-like sized compute nodes. The first is based on the 4-core/4-thread 2.2 GHz P5040 45nm SoC and the second on a 12-core/24-thread 1.8 GHz T4240 28nm SoC. Both SoCs employ the 64-bit Power instruction set. We show T4240 Specbench performance results, power consumption, describe the packaging of our first P5040 based 8-way hot-water cooled cluster and provide an outlook.","PeriodicalId":300780,"journal":{"name":"2015 International Conference on IC Design & Technology (ICICDT)","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133926497","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"NEMS switches: Opportunities and challenges in emerging IC technologies","authors":"P. Feng","doi":"10.1109/ICICDT.2015.7165878","DOIUrl":"https://doi.org/10.1109/ICICDT.2015.7165878","url":null,"abstract":"The active search for candidates of an ideal switching device for low-voltage logic and ultralow-power applications has stimulated new explorations of contact-mode switches (relays) based on micro/nanoelectromechanical systems (MEMS/NEMS). This has been driven by the fundamental advantages that mechanical devices offer, such as ideally abrupt switching with zero off-state leakage, suitable for harsh and extreme environments, and very small footprints (e.g., particularly with NEMS). This digest paper is focused upon reviewing the state-of-the-art NEMS switching devices (particularly Si and SiC NEMS), and the potential and possibilities towards enabling logic circuit components and integration with Si and SiC circuits, respectively. We also discuss the opportunities and challenges in other technical aspects, including materials, processes, device design, nanoscale contacts, lifetime and reliability, scaling, and the perspective of monolithic 3D integration with the advancing 3D transistors.","PeriodicalId":300780,"journal":{"name":"2015 International Conference on IC Design & Technology (ICICDT)","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133779110","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
G. Eneman, A. D. Keersgieter, A. Mocuta, N. Collaert, A. Thean
{"title":"FinFET stressor efficiency on alternative wafer and channel orientations for the 14 nm node and below","authors":"G. Eneman, A. D. Keersgieter, A. Mocuta, N. Collaert, A. Thean","doi":"10.1109/ICICDT.2015.7165898","DOIUrl":"https://doi.org/10.1109/ICICDT.2015.7165898","url":null,"abstract":"This simulation work studies whether optimal wafer and channel orientations exist that maximize the mobility of 10 nm-node strained-silicon FinFETs. For NFinFETs, strain-relaxed buffers or source/drain stressors yield the highest mobilities on rotated-notch wafers. For PFinFETs, industry-standard directions give the highest mobilities when using Si1-yCy strain-relaxed buffers as a stress booster. Using {110} substrates leads to strained mobilities that are in between what can be obtained by industry-standard and rotated-notch directions.","PeriodicalId":300780,"journal":{"name":"2015 International Conference on IC Design & Technology (ICICDT)","volume":"53 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114571015","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Spagnolo, B. Verbruggen, S. D’Amico, P. Wambacq
{"title":"High-speed analog-to-digital converters in downscaled CMOS","authors":"A. Spagnolo, B. Verbruggen, S. D’Amico, P. Wambacq","doi":"10.1109/ICICDT.2015.7165903","DOIUrl":"https://doi.org/10.1109/ICICDT.2015.7165903","url":null,"abstract":"High data-rate communications need high speed analog-to-digital converters. Recent flash and time interleaved SAR converters implemented in downscaled CMOS technologies have achieved GS/s conversion rates with very low power consumption. Flash ADCs can reach high speed with a single channel but the resolution is limited by exponential complexity and power consumption. SAR ADCs are well suited for higher resolution but, due to the sequential operation, require either massive interleaving or very fast technologies to achieve high speed. Hybrid architectures combine the advantages of different architectures to achieve the optimum compromise for a given resolution. In this paper the trade-offs between power, area and complexity for high speed designs are discussed and the potential of hybrid architectures is investigated.","PeriodicalId":300780,"journal":{"name":"2015 International Conference on IC Design & Technology (ICICDT)","volume":"217 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122925111","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Ashish Kumar, Vinay Kumar, D. K. Janardan, G. Visweswaran, K. Saha
{"title":"A 6T-SRAM in 28nm FDSOI technology with Vmin of 0.52V using assisted read and write operation","authors":"Ashish Kumar, Vinay Kumar, D. K. Janardan, G. Visweswaran, K. Saha","doi":"10.1109/ICICDT.2015.7165877","DOIUrl":"https://doi.org/10.1109/ICICDT.2015.7165877","url":null,"abstract":"A low Vmin, 6T-SRAM is realized in 28nm FDSOI technology using read and write assist methods. We could reduce the Vmin of SRAM cell to 0.52V for the 0.120um2 high density 6T-SRAM. Reduced read margin of the SRAM cell is recovered using a transient rise in cell supply level through word-line coupling. Write assist is realized using application of PVT selective negative bit-line approach. Bit-line is pulled to a required negative value in order to provide sufficient assistance for the write operation. Required power line overshoot is 50mV to ensure correct read operation. For write assist, the undershoot requirement is within 100mV. We could achieve a performance improvement of 50 percent with no power penalty for a 288Kb capacity SRAM with 2K words of 144bits width. The area overhead of the read and write assist scheme is 1.4 percent and 2.5 percent respectively.","PeriodicalId":300780,"journal":{"name":"2015 International Conference on IC Design & Technology (ICICDT)","volume":"143 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123892066","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Tse-Ching Wu, Chien-Ju Chen, Yin-Nien Chen, V. Hu, P. Su, C. Chuang
{"title":"Evaluation of 32-Bit carry-look-ahead adder circuit with hybrid tunneling FET and FinFET devices","authors":"Tse-Ching Wu, Chien-Ju Chen, Yin-Nien Chen, V. Hu, P. Su, C. Chuang","doi":"10.1109/ICICDT.2015.7165880","DOIUrl":"https://doi.org/10.1109/ICICDT.2015.7165880","url":null,"abstract":"In this paper, we investigate the hybrid TFET-FinFET 32-bit carry-look-ahead adder (CLA) circuit and compare the delay, power and power-delay product (PDP) with all FinFET and all TFET implementations in near-threshold region. We use atomistic 3D TCAD mixed-mode simulations for transistor characteristics and HSPICE circuit simulations with look-up table based Verilog-A models calibrated with TCAD simulation results. In the hybrid design, TFETs are used for the top critical path to reduce the longest path delay, and FinFETs are used for the rest of the circuit to reduce switching power and leakage power. The PDP of the hybrid TFET-FinFET CLA circuit is better than the circuits with all FinFET and all TFET implementations in the vicinity of VDD=0.3V. However, as the operating voltage is further reduced, the lower-ranked critical paths (e.g. 2nd critical path) with some FinFET devices in the path stick out, and the delay and PDP become inferior to all TFET implementation.","PeriodicalId":300780,"journal":{"name":"2015 International Conference on IC Design & Technology (ICICDT)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129977839","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Hua Fan, K. Liu, Airong Liu, Lishan Lv, Zhiliang Qiao, Qiang Li
{"title":"Overview of methods to increase linearity of high-performance ADC","authors":"Hua Fan, K. Liu, Airong Liu, Lishan Lv, Zhiliang Qiao, Qiang Li","doi":"10.1109/ICICDT.2015.7165904","DOIUrl":"https://doi.org/10.1109/ICICDT.2015.7165904","url":null,"abstract":"This paper makes a review of main methods to improve the linearity of ADCs. Methods are collected in view of mainstream techniques. A model of redundant noise-shaping Pipelined Flash-SAR ADC is proposed, which is the combination of Flash, Pipeline, SAR and ΣΔ ADC, the effectiveness of the model is demonstrated by simulation. Also, application of dynamic element matching (DEM) linearization techniques to the ΣΔ ADC is verified in a third-order four-bit continuous-time ΣΔ modulator with a standard deviation of 1%. Finally, auxiliary DAC calibration technique to improve the linearity of ADC is verified by a concrete 12-bit SAR ADC chip.","PeriodicalId":300780,"journal":{"name":"2015 International Conference on IC Design & Technology (ICICDT)","volume":"12 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121066483","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
J. Ackaert, T. Colpaert, Aditi Malik, Mario Gonzalez
{"title":"Metallization scheme optimization of plastic-encapsulated electronic power devices","authors":"J. Ackaert, T. Colpaert, Aditi Malik, Mario Gonzalez","doi":"10.1109/ICICDT.2015.7165907","DOIUrl":"https://doi.org/10.1109/ICICDT.2015.7165907","url":null,"abstract":"Deformations of metal interconnects, cracks in interlayer dielectrics and passivation layers in combination with plastic packaging are still a major reliability concern for integrated circuit power semiconductors. In order to describe and understand the failure mechanism and its root cause, already a lot of work has been done in the past. However for the first time it is demonstrated that stress induced in the inter layer dielectric (ILD) can be the main cause of failure for a power switching device. The impact of metallization scheme on the amount of electrical failures of a power switching device was investigated in detail. It was found that with replacing a single layer metallization by a double layer metallization, the number of electrical failures reduced drastically. This improvement was achieved by two mechanisms. First, the stress induced by the molding compound (MC) through the metallization on the ILD under the metallization reduced significantly. Secondly the stress in the passivation located at the foot of the bottom metallization was relocated to the foot of the top passivation. At that location it is far less likely the passivation cracks would propagate into the ILD. These observations were confirmed by 3-D FEM simulations. The simulations enabled to locate and quantify the critical stress levels leading to electrical failures. As a result, the improved metallization scheme could lead to a distinct reduction of the principal stress at the most critical positions and, consequently, to an improvement of the reliability of the devices.","PeriodicalId":300780,"journal":{"name":"2015 International Conference on IC Design & Technology (ICICDT)","volume":"32 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114834042","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Yoshitaka Yamauchi, Y. Yanagihara, H. Fuketa, T. Sakurai, M. Takamiya
{"title":"Optimal design to maximize efficiency of single-inductor multiple-output buck converters in discontinuous conduction mode for IoT applications","authors":"Yoshitaka Yamauchi, Y. Yanagihara, H. Fuketa, T. Sakurai, M. Takamiya","doi":"10.1109/ICICDT.2015.7165905","DOIUrl":"https://doi.org/10.1109/ICICDT.2015.7165905","url":null,"abstract":"To clarify the design guide of single-inductor multiple-output (SIMO) buck converters in discontinuous conduction mode (DCM) targeted for small-size and low-power IoT applications, equations of optimal design parameters (transistor size, inductance, and switching frequency) to maximize the power conversion efficiency are derived for the first time. The analytical optimal designs are verified with SPICE simulations. The maximum efficiency of SIMO DCM buck converters is lower than that of conventional single-inductor single-output (SISO) DCM buck converters, because the power loss due to the energy distribution switches is added. The efficiency degradation is analytically explained for the first time.","PeriodicalId":300780,"journal":{"name":"2015 International Conference on IC Design & Technology (ICICDT)","volume":"946 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123303893","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
D. Yakimets, D. Jang, P. Raghavan, G. Eneman, H. Mertens, P. Schuddinck, A. Mallik, M. Bardon, N. Collaert, A. Mercha, D. Verkest, A. Thean, K. Meyer
{"title":"Lateral NWFET optimization for beyond 7nm nodes","authors":"D. Yakimets, D. Jang, P. Raghavan, G. Eneman, H. Mertens, P. Schuddinck, A. Mallik, M. Bardon, N. Collaert, A. Mercha, D. Verkest, A. Thean, K. Meyer","doi":"10.1109/ICICDT.2015.7165887","DOIUrl":"https://doi.org/10.1109/ICICDT.2015.7165887","url":null,"abstract":"In this study, different S/D contacting options for lateral NWFET devices are benchmarked at 7nm node dimensions and beyond. Comparison is done at both DC and ring oscillator levels. It is demonstrated that implementing a direct contact to a fin made of Si/SiGe super-lattice results in 13% performance improvement. Also, we conclude that the integration of internal spacers between the NWs is a must for lateral NWFETs in order to reduce device parasitic capacitance.","PeriodicalId":300780,"journal":{"name":"2015 International Conference on IC Design & Technology (ICICDT)","volume":"156 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133923106","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}