{"title":"Comparison between passive and active backstepping fault tolerant controls applied to a water jets propelled ship","authors":"Hassène Rebhi, S. Nejim","doi":"10.1109/ASET.2018.8379879","DOIUrl":"https://doi.org/10.1109/ASET.2018.8379879","url":null,"abstract":"In high automated marine vehicles, it is crucial to take an appropriate action against faults that may jeopardize the safety of the system. This paper describes the development and validation of a fault tolerant control for a ship propelled by two water jets via a passive and an active backstepping approach. The vessel is controlled for path following maneuvers, sea keeping heading, speed regulation, and heading changing commands. The inputs are the command to apply to the water jets including the two engines, the steering and reversing unit for each jet. A model of the system considered, issued by a previous work, is used. Details of the design process of passive and active methods are given. The stability of the closed-loop system and uniform boundedness of the tracking error are proved based on Lyapunov theorem. Simulation with many faults scenario is carried out. Results show the effect of the proposed passive and active backstepping FTC. The active approach can more successfully accommodate faults associated with sensors and actuators.","PeriodicalId":298779,"journal":{"name":"2018 International Conference on Advanced Systems and Electric Technologies (IC_ASET)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129486908","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Behavioral study of a multi-input dynamic system by Bond Graph approach","authors":"J. Ben Salem, Najeh Lakhoua, L. E. Amraoui","doi":"10.1109/ASET.2018.8379839","DOIUrl":"https://doi.org/10.1109/ASET.2018.8379839","url":null,"abstract":"The objective of this work is to simulate the dynamic behavior of the vehicle during the braking phase. The proposed approach for the implementation of the models is based on the Bond Graph formalism in order to study the evolution of several representative quantities (speed, braking distance…). This paper begins with a state of the art on the Anti-lock Braking System (ABS). Then, it presents the mathematical representation of vehicle dynamics. These equations lead to the design of the system models. Then, we will use software CarSim and Matlab Simulink to visualize the dynamic behavior of the vehicle during the braking phase.","PeriodicalId":298779,"journal":{"name":"2018 International Conference on Advanced Systems and Electric Technologies (IC_ASET)","volume":"5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126878994","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Efficient implementation of integrall image algorithm on NVIDIA CUDA","authors":"Mouna Afif, Yahia Said, Mohamed Atri","doi":"10.1109/ASET.2018.8379824","DOIUrl":"https://doi.org/10.1109/ASET.2018.8379824","url":null,"abstract":"GPU computing makes it possible to perform more efficient implementation results by trying to optimize tasks that require massively parallel computing due to its particular capabilities. This is the main reason for the increase in the number of implemented GPU algorithms. Compared to the CPU, GPU computing has proved its efficiency in accelerating the processing of algorithms. This paper presents an implementation of the integral image algorithm on GPU by using the programming language CUDA. Integral image is important and crucial step in many image-processing algorithms. We also show a comparison between the performance of our algorithm on CPU and GPU on as well as the accelerations obtained. We also compare our algorithm with other GPU implementations using the programming language CUDA. The achieved results show clearly the efficiency of our algorithm. We achieve high speedup results comparing to other CPU and the GPU implementations.","PeriodicalId":298779,"journal":{"name":"2018 International Conference on Advanced Systems and Electric Technologies (IC_ASET)","volume":"68 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121574475","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Arabic corpus implementation: Application to speech recognition","authors":"W. Helali, Zied Hajaiej, A. Cherif","doi":"10.1109/ASET.2018.8379833","DOIUrl":"https://doi.org/10.1109/ASET.2018.8379833","url":null,"abstract":"This paper presents an Arabic speech recognition system using different features such as MFCC, PLP, LPC We propose to handle noisy data in order to evaluate the robustness of our system under noise conditions. The paper explores, also, the mechanism of building a corpus of the Arabic Tunisian language. Thus, we present the implementation of an automatic speech recognition system under the HTK platform. Experimental tests are performed to prove the effectiveness of different features for Arabic speech samples recognition. The performances on noisy samples from Arabic Tunisian and TIMIT databases show the robustness of the proposed system especially with noisy environments.","PeriodicalId":298779,"journal":{"name":"2018 International Conference on Advanced Systems and Electric Technologies (IC_ASET)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129491884","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Deep learning vs. bag of features in machine learning for image classification","authors":"Sehla Loussaief, A. Abdelkrim","doi":"10.1109/ASET.2018.8379825","DOIUrl":"https://doi.org/10.1109/ASET.2018.8379825","url":null,"abstract":"The main issue in computer vision and notably image classification problems is image feature extraction and image encoding. Here we show and compare two approaches to solve this problem: the first approach uses the Bag of Features (BoF) paradigm. The second one is based on deep learning and especially Convolutional Neural Networks (CNN). Specifically, we use the “AlexNet” CNN model trained to perform well on the ImageNet dataset. Our results shed light on how the use of CNN is more performant than the BoF in the process of feature extraction in a machine learning framework for image classification. This performance is shown by a series of experimentations that we carried out using the Caltech dataset and many classifier algorithms.","PeriodicalId":298779,"journal":{"name":"2018 International Conference on Advanced Systems and Electric Technologies (IC_ASET)","volume":"39 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133973234","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"New approach to extract palmprint lines","authors":"Essia Thamri, K. Aloui, M. Naceur","doi":"10.1109/ASET.2018.8379895","DOIUrl":"https://doi.org/10.1109/ASET.2018.8379895","url":null,"abstract":"Biometrie authentication based on Palmprint pattern recognition has received increasing attention in recent years. The pattern of Palmprint in the hand is unique to every individual and it does not change over time. These properties of uniqueness, stability and strong immunity to forgery make it a potentially reliable biometric modality that offers greater level of security for personal authentication applications. In this work, we explored a new approach to extract the characteristics of the palm print. We used LOG-GABOR filter for lines detection. In the following for the descriptor vector dimension reduction we used the PCA technique. At the end, to evaluate the performance, we applied the Euclidean distance between the PCA vectors and a matching between the vectors that contain the descriptors significance achieved. We obtained an accuracy rate of 97.22% for the PCA-Gabor as well as an equal error rate EER = 1.5%. Validation is carried out using the data base “ CASIA multispectral palmprint”.","PeriodicalId":298779,"journal":{"name":"2018 International Conference on Advanced Systems and Electric Technologies (IC_ASET)","volume":"46 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134222357","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Yassin Kortli, M. Jridi, A. A. Falou, Mohamed Atri
{"title":"A novel face detection approach using local binary pattern histogram and support vector machine","authors":"Yassin Kortli, M. Jridi, A. A. Falou, Mohamed Atri","doi":"10.1109/ASET.2018.8379829","DOIUrl":"https://doi.org/10.1109/ASET.2018.8379829","url":null,"abstract":"Several applications including access control, system security need a robust and real-time face identification systems. The last is almost performed by two processes: the detection of the face and then the recognition. In literature, it can be found that some techniques are used exclusively for the detection process and some others are dedicated for the recognition. In this paper, we propose to test and evaluate a common technique for both processes. More particularly, we consider in this paper only the detection process. In order to do that, we have investigated three descriptors: Local Binary Pattern (LBP), Local Binary Pattern Histogram (LBPH), and Histogram Of Gradient (HOG) to get features of faces. These features are used for training process with the same Support Vector Machine classifier taken in different conditions in order to have training dataset. The use of LBPH desciptor followed by SVM classifier for the detection process consitite the second contribution of the paper. Two sets composed of negative images (non-faces) and positive images (faces) are used to generate the training dataset. The test is performed on another dataset. We evaluate the three techniques for face detection on the standard FERET datasets in order to compare the efficiency of these three methods under different face variations and different illuminations. The Local Binary Pattern Histogram with Support Vector Machine classifier outperform the others techniques in terms of efficiency and robustness of face detection. It has been found that the correct detection rate is greater than 98.04% in average.","PeriodicalId":298779,"journal":{"name":"2018 International Conference on Advanced Systems and Electric Technologies (IC_ASET)","volume":"128 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115889893","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"An IoT approach for a smart maintenance","authors":"Soheyb Ayad, L. Terrissa, N. Zerhouni","doi":"10.1109/ASET.2018.8379861","DOIUrl":"https://doi.org/10.1109/ASET.2018.8379861","url":null,"abstract":"The Internet of Things (IoT) can be defined as an intelligent pervasive environment, based on a continuing proliferation of intelligent networks, wireless sensors and a massive data centers; the basic idea of IoT is that, virtually every small or large physical thing in this world can be a computer connected to the Internet. There are many fields of research on IoT technology with a wide number of application domains. In this paper we had interested to Industry 4.0 and Prognostics Health Manager (PHM) domain; Industry 4.0 is a name for the current trend of automation and data exchange in manufacturing technologies. It includes cyber-physical systems, Internet of things, Cloud Computing and Cognitive Computing. In other side Prognostics Health Manager offers significant benefits for industrial maintenance which is one of the main factors of production process. We have proposed a new smart multitenant solution based on IoT and cloud computing technologies which makes an industrial environment connected, and enhanced with a system offering a Web Application (Dashboard) to monitor, supervise and control an important number of machines geographically separated; the importance of such system become clearly necessary when dealing with a large industrial environment.","PeriodicalId":298779,"journal":{"name":"2018 International Conference on Advanced Systems and Electric Technologies (IC_ASET)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129122970","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"State-feedback control via LMI approach of a 1-DOF disturbed impacting mechanical oscillator under double-side rigid constraints","authors":"H. Gritli, Firas Turki, S. Belghith","doi":"10.1109/ASET.2018.8379897","DOIUrl":"https://doi.org/10.1109/ASET.2018.8379897","url":null,"abstract":"This paper proposes a state-feedback controller using Linear Matrix Inequality (LMI) method for the position control of a single-degree-of-freedom, periodically forced, impact mechanical oscillator subject to asymmetric double-side unilateral rigid constraints. The main idea in the synthesis of the controller lies in the use of the S-procedure Lemma to solve the stabilization problem by considering only the region inside which the oscillator's state evolves. The periodic forcing input is considered as an external disturbance for which we desire compensating it via control. As a result, the synthesis problem of the control law is transformed into a solving problem of a set of Bilinear Matrix Inequalities (BMIs). To convert these BMIs into LMIs, a linearization procedure was employed mainly through the Schur complement Lemma and the matrix inversion Lemma. We show the effectiveness of the developed state-feedback controller in the control of the position of the impact oscillator even in the presence of the periodic forcing input as a persistent exogenous disturbance.","PeriodicalId":298779,"journal":{"name":"2018 International Conference on Advanced Systems and Electric Technologies (IC_ASET)","volume":"42 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128768447","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Deep saliency features for video saliency prediction","authors":"A. Azaza, A. Douik","doi":"10.1109/ASET.2018.8379878","DOIUrl":"https://doi.org/10.1109/ASET.2018.8379878","url":null,"abstract":"Recently, the research on the field of visual saliency estimation increases in both neuro-science and computer vision aspects. In this context, we present a new video saliency approach based on deep saliency features to highlight the most important objects in videos. Our approach investigate the usage of spatio-temporal object candidates for saliency in video data. We extract features using deep convolutional neural network CNN, which recently has a large success in the field of visual recognition. We extract deep features from each video, we train a Random forest and assign saliency to each object candidate. Overall, our deep saliency approach demonstrate a successful performance when we evaluate it on two data sets Fukuchi and SegTrack v2 on both ROC and PR curves and in terms of F-score.","PeriodicalId":298779,"journal":{"name":"2018 International Conference on Advanced Systems and Electric Technologies (IC_ASET)","volume":"97 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-03-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129741315","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}