Materials of the All-Russian scientific and practical conference "Modern machines, equipment and IT solutions for industrial complex: theory and practice"最新文献
{"title":"PROBLEMS OF SPATIAL-TEMPORAL DISTRIBUTION OF INNOVATIONS WITH A DELAYED EFFECT IN THE FOREST COMPLEX","authors":"A. Ivanova, A. Tretyakov","doi":"10.34220/mmeitsic2021_412-420","DOIUrl":"https://doi.org/10.34220/mmeitsic2021_412-420","url":null,"abstract":"The work is aimed at solving one of the most important fundamental and topical interdisciplinary scientific problems of the Russian Federation – the need for scientific substantiation of optimal options for the functioning of state policy in the field of use, protection, protection and reproduction of forests in the Russian Federation through economic mechanisms aimed at effective management of the forest sector of the economy and increasing gross domestic product in the forestry sector based on market demand for products. Hence, there is a special interest in the processes of the spatio-temporal dissemination of innovations for the country’s forestry complex, especially which are the guarantor and basis of intensive forestry, but due to the specifics of my reproduction, I have a deferred economic effect relative to similar innovative products obtained with the help of basic technologies. The paper provides an analytical review of the rate of diffusion of innovations in the sectors of the forestry complex based on the analysis of reliable and objective indicators, in accordance with which it was concluded that the rate of spread of innovative forestry products in time and space is extremely low. It has been established that one of the factors preventing the diffusion of innovative forestry products is the high cost of their creation and the uncertainty of the result obtained. It has been established that the high capital costs of creating an innovative product for commercial use must be compared with biological advantages: growth rate, resistance to diseases and pests, productivity.","PeriodicalId":288141,"journal":{"name":"Materials of the All-Russian scientific and practical conference \"Modern machines, equipment and IT solutions for industrial complex: theory and practice\"","volume":"107 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-10-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124750568","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"OPTIONS FOR SOLVING MODERN ENVIRONMENTAL PROBLEMS","authors":"A. Albrecht, L. Litvinova","doi":"10.34220/mmeitsic2021_392-395","DOIUrl":"https://doi.org/10.34220/mmeitsic2021_392-395","url":null,"abstract":"The article is about vital environmental problems and ways to tackle them. Our responsibilty towards nature and the earth, towards the world we live in as well as towards our descendants makes the society to use environmental brainstorming. It may include the number of the newest trends. They are 1. Recycling for its results are impressive; 2. «green» technologies such as resource saving, less consuming technologies; 3. Changing our mind to be eco-friendly, i.e. fashionable and beneficial both; 4. Transparent environmental policy; 5. Using the newest agricultural technologies to solve the environmental problems — to restore minerals, to increase biomass etc.; 6. Alternative energy as a nice choice; 7. Changing our mind to be eco- responsible. These are the tasks we are to brainstorm and to tackle.","PeriodicalId":288141,"journal":{"name":"Materials of the All-Russian scientific and practical conference \"Modern machines, equipment and IT solutions for industrial complex: theory and practice\"","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-10-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124893928","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"POSSIBILITIES OF USING WOOD WASTE FOR BUILDING MATERIALS PRODUCTION","authors":"A. Shinkaruk, V. Danilov, A. Ayzenshtadt","doi":"10.34220/mmeitsic2021_386-391","DOIUrl":"https://doi.org/10.34220/mmeitsic2021_386-391","url":null,"abstract":"The analysis of the amount of wood waste generated, its types and possible uses of such waste is carried out. The technological features of the production of wood-mineral composite based on wooden bark and basalt waste with heat and sound insulating properties are given. It is shown that, depending on the selected ratio of the components of the mixture, a composite with specified operational characteristics can be obtained.Production of a new composite material is designed to expand the range of eco-friendly building materials in Russia, and also to solve the problem of wood waste disposal.","PeriodicalId":288141,"journal":{"name":"Materials of the All-Russian scientific and practical conference \"Modern machines, equipment and IT solutions for industrial complex: theory and practice\"","volume":"183 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-10-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134305158","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"PROSPECTS OF MENTORING AS A FORM OF IMPROVING THE QUALITY OF HUMAN CAPITAL IN THE TIMBER INDUSTRY","authors":"N. Azarova, M. Opara","doi":"10.34220/mmeitsic2021_396-402","DOIUrl":"https://doi.org/10.34220/mmeitsic2021_396-402","url":null,"abstract":"The article deals with the problems associated with personnel problems in the timber industry complex. Efficient companies in the timber industry complex consider mentoring as a form of improving the quality of human capital. This tendency is especially evident in those regions where timber companies play a dominant role. The aim of mentoring is to train a specialist who meets the requirements for his/her quality and competence on the part of enterprises, organizations of the region and the Russian Federation. It is impossible to train a modern specialist in isolation from real production conditions – professional practice. That is why the authors defined the mission of mentors in a modern organization, identified the stages of training under the guidance of a mentor in the enterprises of timber industry complex. The authors proposed options for staff development. Learning of the system, directions of mentoring, assistance, assistance in getting the job tempo and rhythm, mastering of job tasks and duties, acquiring of practical knowledge and skills, social-psychological adaptation in a team, adaptation to corporate culture, learning of traditions and rules of conduct in the enterprise – all these are the main aims of mentoring organization as a source of quality human capital improvement in timber industry enterprises. Thus, a mentor not only explains production technology and introduces equipment, but also helps a newcomer to join the team, get acquainted with masters and managers and the company’s culture.","PeriodicalId":288141,"journal":{"name":"Materials of the All-Russian scientific and practical conference \"Modern machines, equipment and IT solutions for industrial complex: theory and practice\"","volume":"17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-10-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131543782","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"REGULATORY AND INFORMATION SUPPORT FOR DESIGN AND OPERATION OF ASPIRATION SYSTEMS IN WOODWORKING","authors":"S. Trofimov","doi":"10.34220/mmeitsic2021_361-367","DOIUrl":"https://doi.org/10.34220/mmeitsic2021_361-367","url":null,"abstract":"The report reflects the results of the analysis of the state of technical regulation of the design and operation of aspiration systems in woodworking, the presence of problems in ensuring their functional, energy efficiency and safety, the practice of training technical personnel and engineering personnel. The information on the direction of research of the properties of crushed wood, the operation of equipment, the development of technical regulatory legal acts of the Republic of Belarus, the implementation of the results in the educational process. National, foreign regulatory and technical documents and sources of information, materials of conferences held abroad were used.","PeriodicalId":288141,"journal":{"name":"Materials of the All-Russian scientific and practical conference \"Modern machines, equipment and IT solutions for industrial complex: theory and practice\"","volume":"179 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-10-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133273403","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"ENERGY SAVING OF WOOD DUE TO ITS MODIFICATION","authors":"T. Storodubtseva, A. Buryakova, A. Rabotkin","doi":"10.34220/mmeitsic2021_340-344","DOIUrl":"https://doi.org/10.34220/mmeitsic2021_340-344","url":null,"abstract":"Modified wood is wood that is improved with special modifiers in order to increase its strength, durability and water-, bio-, fire- and corrosion resistance, which, unlike natural wood, makes it more resistant to various environmental factors. This wood is good to use in construction, and it will be effective for further development, as the buildings will be used longer, and less likely to be subject to repair and reconstruction, which will reduce deforestation. The most popular methods of modification are thermomechanical modification with preliminary steaming of wood, its heating, or with preliminary impregnation with mineral oils; thermochemical modification; chemical modification; radiation-chemical modification. Each type of the above modifications differs in its properties, and also have their own impact on a particular type of wood. The most common and most effective method of modification is achieved by thermomechanical processing. Since it is when the wood is heated, after the introduction of the necessary modifiers into it, the polymers begin to heat up, due to which the vessels of the wood harden, which affects its density. To avoid the destruction of wood, it is very important to monitor the temperature and prevent it from reaching high heating levels.","PeriodicalId":288141,"journal":{"name":"Materials of the All-Russian scientific and practical conference \"Modern machines, equipment and IT solutions for industrial complex: theory and practice\"","volume":"53 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-10-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130454552","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"OVERVIEW OF GLUED WOOD BUILDING MATERIALS","authors":"I. Chirkov, E. Kantieva, L. Ponomarenko","doi":"10.34220/mmeitsic2021_379-385","DOIUrl":"https://doi.org/10.34220/mmeitsic2021_379-385","url":null,"abstract":"Currently, environmental friendliness is one of the main requirements for products of any kind all over the world. The use of wood as a building material fully meets this requirement. Every year the share of wooden housing construction increases, and not only in the segment of low-rise, but also multi-storey wooden houses and structures. When working with a tree, it is necessary to take into account its features and disadvantages. When the humidity changes, the wood changes its size, is affected by fungi and insects, and has a high fire hazard class. In order to improve the performance properties of wood, its modification is widely used, through the use of various processing methods: drying, heat treatment, impregnation with various compositions, gluing. Recently, a large number of innovative construction materials based on wood bonding have appeared on the market: LVL-beams, CLT-panels, glued beams, wooden I-beams. The use of these materials from glued wood in construction allows the use of renewable, eco-friendly raw materials. And despite the higher cost of these materials compared to traditional building materials, they are competitive in their properties: light weight, less load on the foundation, are not subject to corrosion, are easily installed even in areas with difficult engineering and geological conditions, when exposed to fire, they retain their structural strength longer, are easily transported and disposed of.","PeriodicalId":288141,"journal":{"name":"Materials of the All-Russian scientific and practical conference \"Modern machines, equipment and IT solutions for industrial complex: theory and practice\"","volume":"67 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-10-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123849889","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"CHANGE IN THE TENSILE STRENGTH OF PRESSED BIRCH WOOD DURING LOCAL CRUSHING","authors":"S. Snegireva, A. Kurnikova","doi":"10.34220/mmeitsic2021_329-333","DOIUrl":"https://doi.org/10.34220/mmeitsic2021_329-333","url":null,"abstract":"At present, due to the reduction of business wood stocks, the problem of using fast-growing soft hardwoods as industrial raw materials is of particular relevance. This wood has a number of disadvantages – low density, low strength indicators, which limit the scope of its application. It is possible to improve the quality of soft hardwood wood by pressing it (compacting). Compaction of wood has a great influence on the physical and mechanical properties of wood. The wide application of pressed wood is possible in the production of railway sleepers. Pressing wood significantly increases the performance properties of the sleeper beam. One of the advantages of wooden railway sleepers is their high damping properties. The presence of damping properties in wooden sleepers ensures high speed performance and a long service life of the rolling stock. In this connection, research that ensures the rational use of wood raw materials is relevant. The purpose of this study is to determine the nature of the change in the strength limit of pressed birch wood (Betula pendula) during local crumpling.","PeriodicalId":288141,"journal":{"name":"Materials of the All-Russian scientific and practical conference \"Modern machines, equipment and IT solutions for industrial complex: theory and practice\"","volume":"34 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-10-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115430291","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"IMPROVEMENT AND CONSTRUCTION OF WOODWORKING EQUIPMENT FOR PROCESSING MODIFIED WOOD","authors":"Kishvarsho Safarov","doi":"10.34220/mmeitsic2021_318-323","DOIUrl":"https://doi.org/10.34220/mmeitsic2021_318-323","url":null,"abstract":"The sequence realizations technological operations of cutting and stamp wood of soft breeds is described. Modes of cutting in technological processes and receptions of increase of their efficiency are given. Processes of spinless division it must be carried out according to strictly regulated rules of the receiving stage quality of the processed surfaces and productivity we will. Offer special method of tension of the cutting disc. The vibration damping pad during the cutting process allows you to improve the quality of surface treatment. In stamping processes, it is invaluable to maintain the set temperature, the holding time under pressure and assign the required value of the contact pressure these external factors were identified experimentally.","PeriodicalId":288141,"journal":{"name":"Materials of the All-Russian scientific and practical conference \"Modern machines, equipment and IT solutions for industrial complex: theory and practice\"","volume":"27 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-10-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115762012","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"DYNAMICS OF CHANGE OF REQUIREMENTS OF STANDARDS TO DURABILITY OF WOOD-SHAVING PLATES: REASONS AND CONSEQUENCE","authors":"E. Razinkov, T. Ishchenko","doi":"10.34220/mmeitsic2021_304-311","DOIUrl":"https://doi.org/10.34220/mmeitsic2021_304-311","url":null,"abstract":"Drevesno – chip plates are widely used in production of case furniture. The volume of their production constantly grows in Russia. If in 2013 it has been made 7270, then in 2017 – 8370, in 2018 – 9789, in 2019 – 9986 thousand m3 of plates. However, one of the main shortcomings of plates of the plates released by the industry is their low durability. It especially concerns one of the main strength performances of plates – ultimate strength at bend. So, in comparison with requirements of GOST 10632-77 durability of plates at bend of the most widespread thickness (13-20 mm) in accordance with GOST 10632-89 has decreased on 9 and 21, in accordance with GOST 10632-2007 on 21 and 29, and by current GOST 10632-2014 – by 38 and 43% depending on brand of plates. Decrease in durability at stretching perpendicular to plate face less noticeable. One of the main reasons of such decrease, use in technology of plates of low-toxic carboamidoformaldehyde (KFS) pitches the content of free formaldehyde in which generally is makes about 0,15%. It is known, than more free formaldehyde is in pitch of subjects bond quality of wood and wood-base materials, with use of this pitch, above. However such big decrease in durability of plates for furniture makers is big shortcoming. It is necessary to change approaches to designing of furniture from such plates. Manufacturers of plates, using low requirements of the present standard, sometimes manipulate due to decrease in density of plates that results in friability of plates, problem of fastening of plates in furniture designs. The purpose of our work was studying of dynamics of decrease in durability of plates according to requirements of standards, since 1977 till present, establishment of the reasons and possible consequences from such decrease.","PeriodicalId":288141,"journal":{"name":"Materials of the All-Russian scientific and practical conference \"Modern machines, equipment and IT solutions for industrial complex: theory and practice\"","volume":"12 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-10-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117183180","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}