J. Moon, Jongchan Kang, Dave Brown, R. Grabar, D. Wong, H. Fung, P. Chan, D. Le, H. Tai, C. Mcguire
{"title":"100 MHz–8 GHz linear distributed GaN MMIC power amplifier with improved power-added efficiency","authors":"J. Moon, Jongchan Kang, Dave Brown, R. Grabar, D. Wong, H. Fung, P. Chan, D. Le, H. Tai, C. Mcguire","doi":"10.1109/PAWR.2017.7875568","DOIUrl":"https://doi.org/10.1109/PAWR.2017.7875568","url":null,"abstract":"We report on a multi-octave (100 MHz–8 GHz), linear nonuniform distributed amplifier (NDPA) in a MMIC architecture using scaled 120-nm short-gate-length GaN HEMTs. The linear NDPAs were built with six sections in a nonuniform distributed amplifier approach, where each cell consists of main and gm3 cells. The small signal gain was >10 dB over the band, with saturated CW output power of ∼35 dBm at Vdd = 17 V. The PAE improved by 7%–10% within the band compared to the previous NDPA with 150-nm gate-length GaN FETs. Based on two-tone testing, the linear NDPA showed improved OIP3 of ∼50 dBm, compared to OIP3 of 42 dBm for the NDPA without linearization. Under QPSK LTEwaveform, the ACPR1improved by ∼10 dBc at average output power of 23 dBm, without digital pre-distortion.","PeriodicalId":269693,"journal":{"name":"2017 IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR)","volume":"82 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129860401","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Haoyu Wang, Gang Li, Yikang Zhang, Falin Liu, A. Zhu
{"title":"Forward modeling assisted 1-bit data acquisition based model extraction for digital predistortion of RF power amplifiers","authors":"Haoyu Wang, Gang Li, Yikang Zhang, Falin Liu, A. Zhu","doi":"10.1109/PAWR.2017.7875573","DOIUrl":"https://doi.org/10.1109/PAWR.2017.7875573","url":null,"abstract":"In this paper, a low-cost data acquisition approach with novel forward modeling is proposed for model extraction of digital predistortion (DPD) of RF power amplifiers (PA). Compared to the existing 1-bit DPD solution, the proposed approach employs a new loss function using only 1-bit resolution error signal to extract the forward model and the coefficients of DPD model can be extracted afterwards based on the estimated PA output. The proposed solution avoids the calculation of step size in the existing approach, and the convergence is guaranteed due to the convexity of the loss function. The experimental results show that the proposed algorithm achieves equivalent linearization performance as that using the conventional method.","PeriodicalId":269693,"journal":{"name":"2017 IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-01-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116302705","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Power adaptive decomposed vector rotation based digital predistortion for RF power amplifiers in dynamic power transmission","authors":"Yan Guo, A. Zhu","doi":"10.1109/PAWR.2017.7875559","DOIUrl":"https://doi.org/10.1109/PAWR.2017.7875559","url":null,"abstract":"In this paper, a power adaptive digital predistortion (DPD) model is proposed to linearize RF power amplifiers (PAs) operated in dynamic power transmissions. By employing the decomposed vector rotation (DVR) based nonlinear weighting technique to adjust the DPD coefficients dynamically, the distortion induced by the dynamic power operation can be effectively compensated. Experimental test results with a high power Gallium Nitride (GaN) Doherty PA confirm that higher linearization performance can be achieved by employing this model, compared to that using the existing approaches.","PeriodicalId":269693,"journal":{"name":"2017 IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR)","volume":"23 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2017-01-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126803424","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Y. Tajima, D. Wandrei, Qin-Shen Schultz, T. Quach, P. Watson, W. Gouty
{"title":"Improved efficiency in outphasing power amplifier by mixing outphasing and amplitude modulation","authors":"Y. Tajima, D. Wandrei, Qin-Shen Schultz, T. Quach, P. Watson, W. Gouty","doi":"10.1109/PAWR.2017.7875572","DOIUrl":"https://doi.org/10.1109/PAWR.2017.7875572","url":null,"abstract":"Outphasing amplifier using input signals that are both amplitude and differential phase modulated (mixed mode) has demonstrated higher efficient amplification than pure outphasing or amplitude modulation alone. An algorithm to convert the input signal to the mixed mode modulation was introduced. With LTE signal having 7.5 dB of Peak-to-Average ratio, the mixed mode modulation improved the efficiency of the amplifier as much as 15%. At the best condition, we achieved 77 % of output stage drain efficiency with the ACPR of 27dBc at 40 dBm of average output power before DPD correction. The mixed mode modulation also made it possible to configure a multistage outphasing amplifier with a total gain of 20 dB and 67% of overall efficiency. The paper explains the principle of operation, test bench configuration and actual data obtained.","PeriodicalId":269693,"journal":{"name":"2017 IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR)","volume":"7 10","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120998004","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Wideband digital predistortion with sub-Nyquist nonuniform sampling and reconstruction of feedback path","authors":"T. Gotthans, R. Maršálek, J. Gotthans","doi":"10.1109/PAWR.2017.7875576","DOIUrl":"https://doi.org/10.1109/PAWR.2017.7875576","url":null,"abstract":"We consider the problem of periodic nonuniform sampling of a multiband signal and its reconstruction from samples in the feedback path of a digital predistortion system in order to decrease the sampling rate, hence to increase the bandwidth of digital predistortion system. Such considerations are particularly important in context of the wideband multiband linearization system design.","PeriodicalId":269693,"journal":{"name":"2017 IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR)","volume":"142 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123449636","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
P. Roblin, Hsiu-Chen Chang, Chenyu Liang, Ruwaybih Alsulami, Francisco J. Martinez-Rodriguez, José Alejandro Galaviz Aguilar
{"title":"Direct design of Doherty and Chireix PAs using a nonlinear embedding device model","authors":"P. Roblin, Hsiu-Chen Chang, Chenyu Liang, Ruwaybih Alsulami, Francisco J. Martinez-Rodriguez, José Alejandro Galaviz Aguilar","doi":"10.1109/PAWR.2017.7875569","DOIUrl":"https://doi.org/10.1109/PAWR.2017.7875569","url":null,"abstract":"Waveform engineering is commonly used to optimize the power efficiency, linearity and output power of power amplifiers (PA). In this search for the optimal waveforms, PA designers have become interested in knowing the internal mode of operation of the device at the current-source reference-planes. However given the huge search space for the input and output multi-harmonic terminations required to find the desired internal waveforms, it is much desirable to use a nonlinear embedding device model to readily obtain the required multi-harmonic voltage and current waveforms at the transistor measurement (package or extrinsic) reference-planes in order to realize the desired mode of operation at the current-source reference-planes. In this paper, examples of such designs for Doherty, Chireix and class-J amplifiers will be presented to demonstrate how this promising technique streamlines the design of such PAs.","PeriodicalId":269693,"journal":{"name":"2017 IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR)","volume":"121 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115576557","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Filipe M. Barradas, Pedro Miguel Lavrador, T. Cunha, J. Pedro
{"title":"Using statistical information for fast static DPD of RF PAs","authors":"Filipe M. Barradas, Pedro Miguel Lavrador, T. Cunha, J. Pedro","doi":"10.1109/PAWR.2017.7875560","DOIUrl":"https://doi.org/10.1109/PAWR.2017.7875560","url":null,"abstract":"Modern radio-frequency transmitters require digital predistortion to fulfil linearity requirements while operating the RF PA in highly efficient modes. A least-squares process is typically employed to calculate the predistorter coefficients. The least-squares method requires complex mathematical operations and relies on the observation, at the input and output of the PA, of a specific realization of a telecommunication signal. With the increase of signal bandwidths faster DPD methods are required. In this paper, we use statistical measures to create an inverse of the PA. The proposed method avoids the least-squares formulation potentiating a much faster DPD extraction solution., Modern radio-frequency transmitters require digital predistortion to fulfil linearity requirements while operating the RF PA in highly efficient modes. A least-squares process is typically employed to calculate the predistorter coefficients. The least-squares method requires complex mathematical operations and relies on the observation, at the input and output of the PA, of a specific realization of a telecommunication signal. With the increase of signal bandwidths faster DPD methods are required. In this paper, we use statistical measures to create an inverse of the PA. The proposed method avoids the least-squares formulation potentiating a much faster DPD extraction solution.","PeriodicalId":269693,"journal":{"name":"2017 IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR)","volume":"193 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116417982","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Auxiliary power tracking technique for linearity improvement of a 10 W GaN HEMT PA with and without Power Gate Tracking","authors":"Dragan Gecan, M. Olavsbråten, K. Gjertsen","doi":"10.1109/PAWR.2017.7875577","DOIUrl":"https://doi.org/10.1109/PAWR.2017.7875577","url":null,"abstract":"This work shows linearity improvement of an 10 W GaN HEMT PA with Auxiliary Power Tracking (APT) technique. It is shown that APT provides higher level of linearity improvement than Auxiliary Envelope Tracking (AET) with 1 percentage point higher PAE. Achieved linearity improvement is 8.8 dB in ACPR and 6.5 percentage points in EVM compared to the reference Class-AB PA. Benefit of the APT over AET is in its limited bandwidth of the drain voltage waveform of only twice the RF bandwidth. In combination with Power Gate Tracking (P-GT), where coefficients of the gate tracking function are optimized for linearity, 11.3 dB better ACPR and 7.28 percentage points better EVM is achieved compared to the reference PA with 1st order polynomial tracking function.","PeriodicalId":269693,"journal":{"name":"2017 IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR)","volume":"7 8","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120839894","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A UHF 1-kW solid-state power amplifier for spaceborne SAR","authors":"G. Formicone, J. Burger, J. Custer","doi":"10.1109/PAWR.2017.7875566","DOIUrl":"https://doi.org/10.1109/PAWR.2017.7875566","url":null,"abstract":"A 2-stage 40 dB gain 1 kilowatt transmitter pallet for remote sensing synthetic aperture radar (SAR) applications in P-band from 420 to 450 MHz is presented. The unique feature of this paper is the use of GaN transistors operating from a 75 V drain bias. All commercially-available GaN transistors operate from 60 V or less drain supply, but using 75 V increases the load impedance at the fundamental and reduces the output capacitance which enables the optimum impedance to be presented to the FET at the harmonics even at kW power levels. As a consequence, we report 75% minimum power-added efficiency from a two-stage amplifier across the entire 420–450 MHz bandwidth under 100 μs with 10% duty cycle. This is 15% higher efficiency than is typically achieved with traditional TWT implementations.","PeriodicalId":269693,"journal":{"name":"2017 IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR)","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124965254","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Optimized output baluns for wideband differential class D PAs","authors":"M. Kamper, G. Fischer","doi":"10.1109/PAWR.2017.7875580","DOIUrl":"https://doi.org/10.1109/PAWR.2017.7875580","url":null,"abstract":"This paper presents wideband baluns optimized for current made class D (CMCD) amplifiers. A tuned harmonic impedance space for the CMCD power amplifier (PA) can be defined for a maximum percent bandwidth of 100%. The present paper, therefore, examines wideband baluns to attach single-ended loads to the differential class D PA and offers an optimized planar balun with a bandwidth of 141%.","PeriodicalId":269693,"journal":{"name":"2017 IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR)","volume":"97 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126867285","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}