{"title":"Modeling and dispatching refinement for implantation to reduce the probability of tuning beam","authors":"Kai-Ting Yang, Leo Ke, Tina Shen","doi":"10.1109/ASMC.2015.7164467","DOIUrl":"https://doi.org/10.1109/ASMC.2015.7164467","url":null,"abstract":"Implantation equipment is expected to possess the highest possible productivity due to the short process time in a semiconductor manufacturing factory. The setup time of implantation plays a more important role in improving tool productivity as compared with other processes. Dedicated tools for individual recipe groups avoid setup occurrence but lead to low tool utilization and high equipment cost. Restraining the occurrence of setup is necessary for improving productivity in implant area. Aiming at how to improve same recipe rate, a novel dispatching algorithm is proposed in this paper, which politically selects timings of changing recipes for lots with Q-time constraints according to queue lengths of individual recipes. The proposed algorithm let the interruptions due to Q-time issue can be coupled with unavoidable recipe changes which are caused by that tools exhaust some kind of lots. Compared to the conventional dispatching in which the lots with low arrival rates would interrupt continuous production runs of tools when they almost suffer Qtime over, the rate of tuning beams can be reduced by 12%.","PeriodicalId":267927,"journal":{"name":"2015 26th Annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC)","volume":"27 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-07-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114641592","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Improved ion implant exhaust management for reduced energy and capital costs","authors":"J. Sweeney, K. Olander, Steven Ballance","doi":"10.1109/ASMC.2015.7164463","DOIUrl":"https://doi.org/10.1109/ASMC.2015.7164463","url":null,"abstract":"Climate change, as a consequence of increased greenhouse gas emissions, is a growing concern. Reducing energy usage in semiconductor manufacturing is an effective way to be responsive to this global issue and reduce costs. Compared to other manufacturing tools in the fab, ion implanters require the largest exhaust volume, typically using 2500 CFM in total ventilation, split between the gas box and the containment shell enclosure. Considering a fab may contain 30+ implanters, the energy needed to replace this volume of clean, highly conditioned air is substantial and requires large infrastructure expenditures. In 2009, Texas Instruments published a methodology to save both variable and capital costs by reusing about 75% of the exhausted air volume associated with operating the implanters in one of their 300 mm fabs. This article examines the energy savings, avoided capital spending and safety of operation associated with this change. Building on TI's advances, this article also proposes ways to further reduce exhaust requirements and integrate ventilation management into the operating architecture of the ion implanter to produce a smart system capable of operating at or below 95% of historical levels and at an even higher level of safety.","PeriodicalId":267927,"journal":{"name":"2015 26th Annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC)","volume":"39 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-07-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131289996","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
M. Specht, H. Franke, O. Luxenhofer, K. Mai, W. Usry, R. Newcomb
{"title":"Correlation of non-visual defects at post copper CMP to yield critical physical defects at next metallization layer","authors":"M. Specht, H. Franke, O. Luxenhofer, K. Mai, W. Usry, R. Newcomb","doi":"10.1109/ASMC.2015.7164441","DOIUrl":"https://doi.org/10.1109/ASMC.2015.7164441","url":null,"abstract":"The NVD inspection system detected radial “streak” like NVDs at the post Cu CMP clean process that were not detected by the optical inspection system. Layer to layer overlay of the NVD defect maps from the current Cu CMP layer with the optical defect maps from post nitride deposition and the next copper interconnect level revealed that the NVDs were truly the root cause of the yield critical defect issue.","PeriodicalId":267927,"journal":{"name":"2015 26th Annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC)","volume":"99 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-07-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127122588","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
E. Ramanathan, M. Silvestre, AnbuSelvam KM Mahalingam, Nitin Garg, Siddhartha Siddhartha, C. Ordonio, J. Schaller
{"title":"Effect of top corner rounding in BEOL to yield in advanced technologies","authors":"E. Ramanathan, M. Silvestre, AnbuSelvam KM Mahalingam, Nitin Garg, Siddhartha Siddhartha, C. Ordonio, J. Schaller","doi":"10.1109/ASMC.2015.7164453","DOIUrl":"https://doi.org/10.1109/ASMC.2015.7164453","url":null,"abstract":"In advanced technologies as the dimensions shrink, even the slight change in profiles can cause issues in BEOL integration. This paper discusses the effect of dielectric profile on product yield. Even though these issues were not seen on standard monitoring structures, the issue has been observed in products of very complicated design structures. The yield losses for this failure mechanism range from 10% to 20%. The fails being more of a functional fail than a physical failure made the problem even more complicated. Here we discuss how the issue was identified by data mining, followed by in depth investigation on individual module and understanding the interactions. By understanding the interaction between process modules, an optimized and manufacturable solution was derived and implemented. The issue was addressed by optimizing the film treatment and the wet-clean optimization, as an integrated module approach. Yield was verified on this optimized process and proven.","PeriodicalId":267927,"journal":{"name":"2015 26th Annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC)","volume":"110 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-05-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115087073","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Taher Kagalwala, R. Dasaka, M. Aquilino, L. Economikos, A. Cepler, Charles Kang, Naren Yellai
{"title":"Integrated metrology's role in Gas Cluster Ion Beam etch","authors":"Taher Kagalwala, R. Dasaka, M. Aquilino, L. Economikos, A. Cepler, Charles Kang, Naren Yellai","doi":"10.1109/ASMC.2015.7164454","DOIUrl":"https://doi.org/10.1109/ASMC.2015.7164454","url":null,"abstract":"Shrinking process windows for advanced processing of complex devices, sub-14nm, require advanced topography control. Within-wafer topography variations impact the uniformity of subsequent layers and can affect yield. Process tools can generally control global uniformity across wafer, but are not well equipped to fine-tune the local (reticle-to-reticle) topography. Advanced new process tools such as the Gas Cluster Ion Beam (GCIB) offer a promising path for improving topography within wafer and from wafer-to-wafer [1, 2]. GCIB uses a highly localized focus beam controlled by location specific processing (LSP) algorithms to achieve the needed planarization corrections. In order to be effective, the LSP algorithms require wafer-specific knowledge on the incoming topography distribution. The beam dwells in different locations on the wafer for different amounts of time in order to vary the amount of material removed. Therefore, the performance of local planarization tools depends on the availability and quality of the metrology data. Integrated scatterometry-based metrology (IM) is the workhorse metrology enabler for inline APC (Advanced Process Control) and monitoring solutions for the Chemical Mechanical Planarization (CMP) and Reactive Ion Etching (RIE) processes. While maintaining equivalent performance to their standalone (SA) scatterometry siblings, IMs are typically mounted on the GCIB tool and dedicated to provide pre and post-process measurements for wafers processed on the tool. They enable real-time per-wafer adjustments to within-lot process knobs due to their proximity to the process.","PeriodicalId":267927,"journal":{"name":"2015 26th Annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC)","volume":"29 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-05-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116728062","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jimmy Iskandar, J. Moyne, K. Subrahmanyam, P. Hawkins, M. Armacost
{"title":"Predictive Maintenance in semiconductor manufacturing","authors":"Jimmy Iskandar, J. Moyne, K. Subrahmanyam, P. Hawkins, M. Armacost","doi":"10.1109/ASMC.2015.7164425","DOIUrl":"https://doi.org/10.1109/ASMC.2015.7164425","url":null,"abstract":"Over the past two years the Predictive Maintenance (PdM) capability in semiconductor manufacturing has migrated from Proof-of-Concept (PoC) and univariate Fault Detection (FD) extrapolation mechanisms to fab-wide solutions that are (1) robust to typical process and equipment disturbances, (2) extensible so as to provide solution approaches that are portable across instances of a tool type and across tool types, and (3) maintainable so as to provide solutions that are useful for long periods of time. A number of advancements have facilitated this advancement including solutions for porting modeling components across process and equipment types, mechanisms for incorporating process and equipment knowledge into models, mechanisms for determining model context (e.g., recipe) dependency, methods for model optimization to fab financials, and methods for rejecting run-time disturbances in PdM modeling. As a result of these and other innovations, the landscape of PdM in semiconductor manufacturing has rapidly advanced to the point that, from a technical perspective, solutions are now available for fab-wide PdM realization.","PeriodicalId":267927,"journal":{"name":"2015 26th Annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC)","volume":"26 5","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-05-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114111749","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Yield improvement in dense EEPROM by bit mapping and experimental design","authors":"Moshe Agam, S. Menon, P. Cosmin","doi":"10.1109/ASMC.2015.7164478","DOIUrl":"https://doi.org/10.1109/ASMC.2015.7164478","url":null,"abstract":"This paper demonstrates how combined activities of bit mapping of dense EEPROM array, layout overlay, and failure analysis can lead to experimental design to improve yield. In this methodology a complicated detection of failing bits in a large array is transformed to multi variable design with simple detection. Specifically, it describes the process of detection of word line failures caused by salicide voids and how a simple test chip and experimental design can bring this problem to resolution.","PeriodicalId":267927,"journal":{"name":"2015 26th Annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC)","volume":"114 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-05-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124389423","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
D. Bhattacharyya, Sridhar Kuchibhatla, Akshey Sehgal, Y. Shen, Haiting Wang, Jagdish Prasad
{"title":"Selective isotropic wet etching of TiN and TaN for high k metal gate structure","authors":"D. Bhattacharyya, Sridhar Kuchibhatla, Akshey Sehgal, Y. Shen, Haiting Wang, Jagdish Prasad","doi":"10.1109/ASMC.2015.7164500","DOIUrl":"https://doi.org/10.1109/ASMC.2015.7164500","url":null,"abstract":"As the size of the semiconductor device continues to shrink, two integration approaches are used for gate module; (1) gate first, and (2) gate last. The gate last approach requires removal of thin (10-30Å) titanium nitride (TiN) diffusion blocking layers during the “replacement” process after the poly-Si layer is removed. An etch rate study was conducted to evaluate the selectivity of a combined aqueous/solvent cleaning chemistry at various temperatures on blanket TiN and TaN wafers to identify the optimum operating regime. A significant improvement of yield with the application of the new cleaning approach has been observed.","PeriodicalId":267927,"journal":{"name":"2015 26th Annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC)","volume":"35 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-05-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128166338","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
S. Halder, A. Schulze, P. Leray, M. Caymax, G. Bast, G. Simpson, Neli Ulea, M. Polli
{"title":"Using the low frequency component of the background signal for SiGe and Ge growth monitoring","authors":"S. Halder, A. Schulze, P. Leray, M. Caymax, G. Bast, G. Simpson, Neli Ulea, M. Polli","doi":"10.1109/ASMC.2015.7164442","DOIUrl":"https://doi.org/10.1109/ASMC.2015.7164442","url":null,"abstract":"The objective of this paper is to elucidate novel applications where the low frequency component of a background signal (haze) level of a wafer inspection tool can be used to qualitatively analyze different epitaxial processes. During initial epitaxial development cycles, a fast method of qualifying the growth runs is required. While SEM inspections can sub-sample the wafer, a semi-quantitative way of qualifying growth can be immensely helpful to quicken up the process. In this paper we monitor the epitaxial growth of Ge (heteroepîtaxial) and SiGe strain relaxed buffer layers (SRB approach) with haze.","PeriodicalId":267927,"journal":{"name":"2015 26th Annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC)","volume":"24 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-05-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121940634","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Moshe Agam, S. Menon, P. Cosmin, T. Yao, P. Mcgrath, Bladimiro Ruiz, B. Baylis, Eric Ameele, Kirk Rolofson, R. Young
{"title":"Challenges in integrating embedded non volatile memory with floating poly and ONO in base line process","authors":"Moshe Agam, S. Menon, P. Cosmin, T. Yao, P. Mcgrath, Bladimiro Ruiz, B. Baylis, Eric Ameele, Kirk Rolofson, R. Young","doi":"10.1109/ASMC.2015.7164485","DOIUrl":"https://doi.org/10.1109/ASMC.2015.7164485","url":null,"abstract":"This paper discuss the challenges of the integration of non volatile memory array in base line CMOS technology. Process modules of Oxide-Nitride-Oxide (ONO) and floating poly are reviewed with specific examples. This integration work resulted in a successful production line with a path for additional integration of high power LDMOS devices with deep trench isolation (DTI).","PeriodicalId":267927,"journal":{"name":"2015 26th Annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-05-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130171895","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}