{"title":"Application of Real-Time Fluids Data to Reduce Uncertainty in Casing-to-Casing Time","authors":"D. Jamison, Robert L. Williams, Aidan Porter","doi":"10.2118/194125-MS","DOIUrl":"https://doi.org/10.2118/194125-MS","url":null,"abstract":"\u0000 Uncertainties in the drilling process result in safety factors or safety margins sufficient to minimize risks in the drilling process. These safety margins represent inefficiencies in the system. This paper will discuss a method for reducing uncertainty as it relates to well bore pressures and hole cleaning to eliminate or reduce these inefficiencies, quantify the rates of penetration that can be achieved, and illustrate the expected wellbore pressures generated by these rates of penetration.\u0000 When data is collected manually, the nuances of fluid changes are lost between property measurements. This paper will illustrate the difference between calculating equivalent circulating densities (ECD) with manually collected mud report data and fluid properties collected in real time and the impact that this can have on optimizing the rate at which the operator can drill and trip pipe.\u0000 A patent-based methodology will be presented, in which real-time drilling and fluids data are captured and utilized to model ECD pressure data related to the bore hole. The actual and modeled data are statistically analysed to infer information about how rapid a rate of penetration (ROP) may safely be employed to optimize drilling results.\u0000 Data will be presented demonstrating the impact that small improvements in fluid parameters and drilling operations can have over the course of drilling a well.\u0000 The role that a real-time hydraulics software model plays in providing predictive analytics for ROP optimization will also be discussed. Predictive analytics enable operators to look several stands ahead of the bit to determine if the ROP drilled will cause issues in the future. This enables the identification of the maximum ROP that can be drilled versus optimizing instantaneous ROP. This enables operators to optimize casing-to-casing time.","PeriodicalId":265157,"journal":{"name":"Day 1 Tue, March 05, 2019","volume":"38 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122641916","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Myth-Busting Performance Properties of Nonmetallic Rigid Centralizers","authors":"R RodrigueMaxime, Larry A. Kendziora, D. Farley","doi":"10.2118/194094-MS","DOIUrl":"https://doi.org/10.2118/194094-MS","url":null,"abstract":"\u0000 Performance characteristics of nonmetallic rigid centralizers are not defined under the API 10D, Methods for Testing of Solid and Rigid Centralizers. API Technical Report 10TR5 defines recommended performance tests for rigid centralizers, but does not describe testing for coefficient of friction or wear loss. Selection criteria are often based on manufacturer's test methods, material supplier data sheets, and end-user experience using various materials and designs. While American Society for Testing and Materials (ASTM) testing methods are available to measure mass loss caused by wear and frictional coefficient, the selection of the test method that provides the most accurate data replication use in a wellbore is proposed.\u0000 Rapid advancements in the mechanical properties of composite materials have given manufacturers a multitude of material choices. However, comparative data based on standardized testing is inconsistent throughout the industry. Not only should consistent test methods for wear and coefficient of friction be established, but resistance to load-at-temperature should also be a criterion for measurement. Because of a lack of an industry standard testing protocol during product development, a standardized method was generated to best replicate the performance characteristics required for downhole conditions.\u0000 Various ASTM test methods are deployed in the qualification of rigid composite centralizers, which yield a wide array of results attributed to the inconsistencies of test apparatus and conditions of testing. Through trial and error, a best practice was established for the qualification on nonmetallic rigid centralizers that resulted in more accurate measurements of wear and frictional coefficient. However, friction factor and wear resistance are not the only attributes for durable centralizer requirements to effectively run casing to the target depth. In some instances the casing may need to be retrieved from the wellbore. Other factors such as the ability to rotate the casing string at a prescribed temperature and load rating need to be tested and fully understood. By standardizing the test method for nonmetallic centralizers, the mystery regarding their performance is more clearly understood. The proposal is for lessons learned during product development to be considered for adaptation in API 10TR5.\u0000 The rapid advancement of new types of composite materials and the ability to measure their performance properties in downhole conditions will lead to further cost-effective product innovations.","PeriodicalId":265157,"journal":{"name":"Day 1 Tue, March 05, 2019","volume":"24 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129523014","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"An Analytical Model for Double-Shouldered Connection Strengths","authors":"G. Pettit","doi":"10.2118/194180-MS","DOIUrl":"https://doi.org/10.2118/194180-MS","url":null,"abstract":"\u0000 The drilling industry has become enamored with the extra torsional capacity and clearance that are available when double-shouldered connections are used in the place of the single-shouldered connections that are in the public domain. These proprietary connections allow us to drill farther, faster, and with less damage to our drill string.\u0000 To this point, however, no analytical model has been introduced that can accurately calculate the tensile and torsional capacities of these useful connections. Typically, the connection designer and/or manufacturer creates an empirical formula that is calibrated through laboratory and field testing. This approach is perfectly acceptable, but it hinders those tool designers that need something different from what is offered on the public market. It is rarely cost-efficient to perform laboratory and field testing for a one-off connection design.\u0000 Single-shouldered connections, such as API drill stem connections, have a straightforward analytical equation that can be used to determine the capacities of any connection. This equation may not be perfect—it relies on linear assumptions that are probably not descriptive of the connection loading—but several decades of use have allowed the industry to be confident in its strengths and aware of its shortcomings.\u0000 Thus, what is needed is to simply extend the approach of the original single-shouldered equation to account for a second shoulder. Though the mathematical complexity increases a bit, the assumptions are the same, lending the same confidence to the extended equation that the industry has for the original.\u0000 This paper presents the derivation of just such an equation. The implicit assumptions present in the original equations are discussed, and then the same ideas are applied to a double-shouldered connection. The full set of new equations are developed and described, including tips on their practical use gained from tool-design experience.","PeriodicalId":265157,"journal":{"name":"Day 1 Tue, March 05, 2019","volume":"7 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124045176","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Modelling the 3D Bit-Rock Interaction Helps Designing Better PDC Bits","authors":"Pelfrene Gilles, Stab Olivier, Tilleman Danny, Gallifet Thomas, Cuillier Bruno, Carlos Julien","doi":"10.2118/194134-MS","DOIUrl":"https://doi.org/10.2118/194134-MS","url":null,"abstract":"\u0000 The bit-rock interaction has long been studied to assess PDC drill bit performance, which is driven both by cutting and non-cutting parts of the drill bit. While the cutter-rock interaction has been studied by many authors in the literature, only a few studies have focused on the interaction between the rock and non-cutting parts of the drill bit.\u0000 In this paper, we introduce a new method designed to model the interaction between the whole drill bit and the rock formation within a full three-dimensional framework. This approach is based on a generic computational geometry algorithm which simulates the drilling process considering both the drill bit and the hole being drilled as a set of 3D meshed surfaces. The volume of rock removed by the PDC cutters as well as the area and the volume of contact between the rock and the non-cutting parts of the drill bit can be computed with a high accuracy based on the 3D CAD model of the drill bit.\u0000 The in-house drill bit simulator implementing this algorithm primarily allows the engineer to estimate how bit-rock interactions distribute between cutting and non-cutting parts of the drill bit and to balance the bit design in the 3D space accordingly over a given range of drilling parameters. This approach has been brought to the field in order to address cutter breakage based on rubbing contacts optimization. Field results associated to some case studies in US shale plays and Canada are described and clearly show that contact points predictions closely match field observations. Moreover, design modifications applied following this process have led to an overall increase in bit performance and bit durability while preventing core-out issues.\u0000 The bit design methodology presented in this paper is dedicated to design drill bits whose interaction with the rock formation is predicted with a higher accuracy by accounting for the exact 3D shape of the drill bit.","PeriodicalId":265157,"journal":{"name":"Day 1 Tue, March 05, 2019","volume":"138 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125748668","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Xunsheng Du, Yuchen Jin, Xuqing Wu, Yu Liu, Xianping Wu, Omar Awan, Joey Roth, K. C. See, Nicolas Tognini, Jiefu Chen, Zhu Han
{"title":"Deep Learning Model for Classifying Cutting Volume at Shale Shakers in Real-Time via Video Streaming","authors":"Xunsheng Du, Yuchen Jin, Xuqing Wu, Yu Liu, Xianping Wu, Omar Awan, Joey Roth, K. C. See, Nicolas Tognini, Jiefu Chen, Zhu Han","doi":"10.2118/194084-MS","DOIUrl":"https://doi.org/10.2118/194084-MS","url":null,"abstract":"\u0000 A real-time deep learning model is proposed to analyze the volume of cuttings from a shaker on an offshore drilling rig. The model is able to extract features and perform real-time classification in relatively good accuracy compared to the traditional video analytics method, which consumes enormous time on the feature extraction. Our approach mainly consists of two parts: 1) a multi-thread engine for decoding, processing, and encoding real-time video streams. The video streaming is offered by a modularized service called RSVP (Rig-Site Virtual Presence). RSVP enables aggregating, storing, transrating/transcoding, streaming, and visualization of video data from the rig. 2) a convolutional neural network (CNN) for the quantitative analysis. The CNN is pre-trained with videos collected from previous drilling operations. Additional noises are added to the video during the training stage to improve the robustness of the model. Each video frame needs to be properly normalized and re-scaled to a fixed size before fed into the CNN. The CNN will generate output to classify the volume of cuttings in real-time. The classification result includes category labels, (\"ExtraHeavy\", \"Heavy\", \"Light\", and \"None\"), as well as the probability for each label. The model and the workflow have been tested on videos streamed directed from an offshore drilling rig. The video stream has a bitrate of 137Kbps, 5.84 frames/s, and a frame size of 720x486. The CNN is trained with an Nvidia GeForce 1070 GPU. The deep learning model and the workflow is tested on a machine without GPU support. Due to the implementation of the multi-threaded video processing engine, we can handle decoding, encoding, video preprocessing and classification in real-time. This allows us to receive a real-time video stream and display the classification results with encoded frames on the user-side screen at the same time. In order to evaluate the result, we build the confusion matrix to facilitate the visualization of the performance of the model. Compared to results manually labeled by engineers, our model achieves more consistent results with improved confidence. The novelty of the project is the capability of monitoring and classifying the cutting volume at shale shakers in real-time via the video streaming.","PeriodicalId":265157,"journal":{"name":"Day 1 Tue, March 05, 2019","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131020363","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Elizabeth Q. Contreras, Diana K. Rasner, R. Martinez, Carl J. Thaemlitz
{"title":"Novel Aromatic Polyamides and its Application in Enhancing the Integrity of Oil Well Cement Sheath","authors":"Elizabeth Q. Contreras, Diana K. Rasner, R. Martinez, Carl J. Thaemlitz","doi":"10.2118/194118-MS","DOIUrl":"https://doi.org/10.2118/194118-MS","url":null,"abstract":"\u0000 Quality of cement is an integral part of well integrity. To ensure and improve cement quality, innovative polymers, based upon a family of polymers known as polyamides, are synthesized to improve the mechanical properties of Portland cement. This results in cement systems that have high resistance to impact breakage in set cement.\u0000 With the addition of polyamides into cement, mechanical properties such as unconfined compression strength (UCS), confined compression strength (CCS), Young's modulus, and the effect of temperature on cement performance are used to show significant improvements to set cement elasticity and compression strength. Under dynamic force loading conditions, up to 30 MPa (4,350 psi) and at temperatures ranging from 20 to 180°C (68-356°F), a tri-axial load cell offers a more comprehensive method of measuring mechanical properties, of designing competent cement systems, and predicting cement integrity. These measurements are further compared to analyses from more traditional methods, such as confined acoustic and unconfined load cells, for information such as compressive strength.\u0000 The polymer additive is a solid comprising of a polyamide that enhances the mechanical properties of set cement by rendering it high-strength and more elastic to reduce plastic deformation. Findings show that the new polyamide-cements exhibit unconfined compressive strength improvements greater than 25% when compared to latex-treated cement. Furthermore, tri-axial load cell measurements are able to quantitatively analyze the reliability of cement by measuring cumulative fatigue damage which predicts cement failure (Reddy, 2007). Strain-controlled cyclic tests to measure mechanical properties at 20°C show that polyamide cements resist deformation better because of higher durability than latex cements. Polyamide cements had only an 11% permanent strain when compared to latex cement, which had a 27% permanent strain. It is important to assess the mechanical performance of oil well cement, which is subject to cyclic loading due to dramatic changes in pressure and temperature during production (Ravi, 2004).\u0000 Lastly, the effects of temperature on cement performance is well-documented to cause phase changes at different scales and a decrease in cement strength (Reddy, 2016). With polyamide-cements, the rate of cement strength retrogression is less at temperatures up to 180°C allowing the cement to have increased strength in comparison to latex cements, as well as to cement with no additives. Collectively, the data on elasticity and high compressive strength shows the value of this new polymer additive for cement systems on long-term zonal isolation in gas and oil wells. These polyamides maintained all favorable characteristics, proving to be the best performing additive that imparts the desired mechanical properties essential to extending the endurance of wellbore cement sheaths.","PeriodicalId":265157,"journal":{"name":"Day 1 Tue, March 05, 2019","volume":"19 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127989466","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Effect of Solid Particle Concentration on Drilling Fluid Rheological Behavior and its Impact on Pressure Losses","authors":"E. Cayeux, A. Leulseged","doi":"10.2118/194131-MS","DOIUrl":"https://doi.org/10.2118/194131-MS","url":null,"abstract":"\u0000 Solid particles in suspension in a fluid, like barite, lost circulation material (LCM), cuttings or cavings, influence the pressure losses that are experienced when pumping or moving a drill-string in a borehole. As the volume fractions of those different solid particles varies along the hydraulic circuit, it is desirable to estimate the impact of local solid concentrations on pressure drops.\u0000 The influence of solid particles on the rheological behavior of fluid has mostly been studied for Newtonian fluids, but very little experimental work has been published for non-Newtonian fluids like drilling muds. For that reason, a series of measurements, made with a scientific rheometer has been conducted on a typical KCl/Polymer water-based mud. The experimental investigation covers the effect of particle concentration on the rheological behavior of the mix, in conjunction with the particle size.\u0000 The change of rheological behavior is slow at low solid concentrations but increases exponentially with larger proportions of solid in suspension. Furthermore, the increase of effective viscosity is larger with fine particles than with coarser ones. Empirical formulas are proposed to describe how the original Herschel-Bulkley rheological behavior of a base fluid can be modified to incorporate the effects of the variation of solid concentrations in the fluid mix.\u0000 All these results are based on measurements made with a scientific rheometer. As computerized and high precision rheometers are usually not available at the rig site, we describe a methodology to utilize standard model 35 rheometer measurements to estimate the pressure loss gradient as a function of the volumetric solid content.","PeriodicalId":265157,"journal":{"name":"Day 1 Tue, March 05, 2019","volume":"33 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131468410","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Lage, E. G. A. Arduino, S. Loureiro, G. Vanni, H. S. Filho
{"title":"Well Safety and Performance Gains from MPD in Unconventional High Overpressure Reservoirs in Argentina","authors":"A. Lage, E. G. A. Arduino, S. Loureiro, G. Vanni, H. S. Filho","doi":"10.2118/194157-MS","DOIUrl":"https://doi.org/10.2118/194157-MS","url":null,"abstract":"\u0000 The present paper describes performance improvements and well safety achieved with the use of Managed Pressure Drilling (MPD) in the exploratory block of Parva Negra Este, in Neuquén Basin. Petrobras Argentina S.A (PESA), with the technical support from the Petrobras’ headquarters, in Brazil, drilled two exploratory wells applying MPD and targeting Vaca Muerta shale oil & gas play.\u0000 High-pressure zones characterized the drilling scenario, reaching, usually, pore pressures higher than 18 lbm/gal in unconventional reservoirs, composed of tight sand and shale. The use of MPD in both well constructions was quite efficient, including well control and plug and abandonment (P&A) operational applications. Those operations proved that MPD can effectively replace the Under-Balanced Drilling (UBD) system, which is standard practice in that area.\u0000 In the first well, PESA reported significant gains in drilling performance when compared to other wells previously drilled. Drilling with MPD did not record non-productive time (NPT), differing substantially from the previous wells constructed in the surroundings of Parva Negra Este with an average NPT of 20 days. A considerably larger recovery of coring samples was achieved, being also possible to eliminate one well section, by drilling two zones of interest in a singlesection. Additionally, lessons learned were implemented, resulting on higher rate of penetration (ROP) with the support of MPD.\u0000 In the second well, a high overpressurized pore zone was reached, leading to a very complex well control event followed by a permanent P&A operation. The formation pore pressure was much higher than the expected for the area. Instead of using an 18 lbm/gal drilling fluid, it was necessary to weight the fluid up to 21.3 lbm/gal, adding hematite as weighting material. In that scenario, the use of MPD made the operations of circulation and well cementing safer than with the conventional drilling approach utilized in that vicinity.\u0000 The application of Dynamic Formation Integrity Tests (DFIT) and Dynamic Pore Pressure Tests (DPPT) ensured a more precise operational window, helping to formulate risk matrices for safely pulling the drilling string out of the hole. In addition, the precise definition of the operational window was a valuable information to plan the best approach for P&A. Besides performing those tests, the MPD system was very useful to evaluate operational parameters and verify how effective was the settlement of the abandonment cement plugs.\u0000 In summary, MPD supported safer drilling and P&A jobs, better drilling performance and greater information achievement through more efficient well logging and sample coring.","PeriodicalId":265157,"journal":{"name":"Day 1 Tue, March 05, 2019","volume":"163 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133908764","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A Novel Mechanical Tool for Annular Cement Verification","authors":"J. D. Andrade, S. Fagerås, S. Sangesland","doi":"10.2118/194135-MS","DOIUrl":"https://doi.org/10.2118/194135-MS","url":null,"abstract":"\u0000 The annular casing cement is an important part of the well barrier throughout the life cycle of a well. With the increasing number of subsea plug and abandonment (P&A) operations, increased attention is now given to annular cement evaluation and the ability to prove adequate zonal isolation. Today, cement evaluation by logging is performed almost exclusively using acoustic logging tools. One of the concerns when it comes to cement integrity is the frequently occurring micro-annulus at the casing-cement interface. Yet, a typical cement evaluation tool may lack of accuracy on its evaluation. Hence, a novel concept for the evaluation of casing-cement micro-annulus has been proposed.\u0000 This paper describes a mechanical-based approach for cement evaluation – the Annulus Verification Tool (AVT). The AVT applies a radial force on the casing inner wall that yields an ovalization of the cross-section, while recording the radial displacement of the casing. A prototype of the AVT has been constructed along with an experimental setup to allow for initial testing of the tool. This comprises the construction of full-scale diameter samples representing a typical 9 5/8-in. production casing cement job, with the possibility to generate a uniform micro-annulus of a known size at the casing-cement interface.\u0000 The tests performed have shown that the AVT is able to differentiate a casing supported by an annular cement sheath from a free pipe, due to the stiffness contrast. By measuring the casing radial displacement with high resolution, the results have shown that a microannulus can be detected and its size quantified with good accuracy. Experimental tests performed with tool eccentricity and tilting has shown that the AVT should be kept centralized to achieve accurate quantification of the microannulus size.\u0000 The AVT module is meant to complement the acoustic tool sting used today, and to improve evaluation of the cement sheath's sealing capability, especially in cases where a micro-annulus is detected or suspected. If an existing microannulus is suspected, the AVT logging response may confirm its occurrence, quantify its size and aid the planning of remedial operations to restore the annular barrier.","PeriodicalId":265157,"journal":{"name":"Day 1 Tue, March 05, 2019","volume":"7 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115839969","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Design and Comparison of Two Drill String Solutions that Break Barriers in Extended Reach Drilling","authors":"A. Awad, F. Carrois, Marta Lafuente, A. Matveyev","doi":"10.2118/194147-MS","DOIUrl":"https://doi.org/10.2118/194147-MS","url":null,"abstract":"\u0000 To date, extended reach drilling (ERD) wells drilled on one of the main UAE offshore reservoirs have been delivered by using a tapered drill string design that combines two sizes of drill pipe. To reduce the number of days per well, a one-size only drill string concept has been considered, but such an option required some improvements in torque and geometry to meet specific well design requirements.\u0000 An initial analysis of the drilling requirements in terms of torque, dimensions, tensile capacity, and hydraulics showed that the process limiter was the drill pipe connection as no option was available in the market that could meet the redesigned requirements. Two new technical solutions were separately developed that took into account the need for a reduced tool joint outer diameter (OD) for equivalent circulating density (ECD) and fishability in an 8½-in. hole. Once developed, the solutions were then validated for manufacturing and field trials.\u0000 The first solution consisted of designing and developing an ultra-high torque thread profile, while the second solution suggested to upgrade the tool joint material grade of a new 4th generation double shouldered connection. Both newly designed drill pipe strings successfully passed the shop stress tests and were mobilized for operations. The drill pipes were used for drilling within the tight hydraulic window of such ERD wells, further validating the original drilling simulation parameters. The successful trial of these two single size string solutions enabled the saving of more than five days of rig operating time per well.\u0000 This paper presents a detailed comparative evaluation of two innovative drill pipe design solutions that enable operators to run a single size string in challenging ERD wells. It also provides an insight into the operational benefits obtained by shifting to the new single size string.","PeriodicalId":265157,"journal":{"name":"Day 1 Tue, March 05, 2019","volume":"48 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114904567","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}