{"title":"Variable data rate modem for low Earth orbiting satellite (LEOS) communication","authors":"C. H. Lee","doi":"10.1109/MILCOM.1995.483692","DOIUrl":"https://doi.org/10.1109/MILCOM.1995.483692","url":null,"abstract":"There is wide interest in providing mobile satellite services (MSS) via low Earth orbiting satellite (LEOS) instead of by the traditional geosynchronous satellites (GEOS). This development conforms with the trends in personal communication services (PCS) where low cost, low power and high volume users are the goals. The distinct features of LEOS are characterized by its low altitude (4000 km versus 37700 km) and its high flyby speed (6.9 km/sec). Due to shortening of the LOS distance by a factor of 4 that is translated into a 12 dB advantage in power as compared to GEOS terminals, LEOS terminals are more compact. It generally radiates in the neighbourhood of 5 Watts. Currently planned small LEOS systems rely on sending short burst of data packet generally of a duration less than 100 msec. There are plans to optimize the data transmission during the burst. This paper studies the possibility of using a variable data rate modem to increase the total throughput in such a system. Baud rate variations in the range of 1200, 2400, 4800, and 9600 are considered. This will be a new feature at the link layer of the OSI model. It is necessary to consider the available link margin variation in the burst period of a practical small LEOS system. Due to the antenna orientation, nonuniform radiation pattern, and the angular aspect between the terminal and satellite, the available link margin is reduced. The crucial issue is how much dB margin is there. An analysis of the available link margin for a variable rate data modem is presented.","PeriodicalId":265124,"journal":{"name":"Proceedings of MILCOM '95","volume":"24 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-11-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117221025","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Bit-error-rate measurements in a WDM network","authors":"F. Pope, K. Wellington, G. Keiser","doi":"10.1109/MILCOM.1995.483702","DOIUrl":"https://doi.org/10.1109/MILCOM.1995.483702","url":null,"abstract":"The introduction of new services (such as multimedia communications, video conferencing, distance learning) is creating a rapid increase in telecommunication traffic. This is leading to the need for higher-capacity transmission networks, with information transport over the network links at rates of tens and hundreds of gigabits per second. Due to processing-speed limitations of electronic cross-connects, optical cross-connects based on wavelength division multiplexing (WDM) is the current technology of choice for realizing a high-capacity backbone to be superimposed on top of the existing electrical transport layer. In a WDM network, the use of multiple optical frequencies has the effect that signals at different wavelengths act as interferers to a specific optical wavelength being received. We describe a three-node WDM ring network and characterize the bit-error rate at a specific wavelength as a function of optical power from \"interfering\" wavelengths in a typical receiver that would be used in a WDM system.","PeriodicalId":265124,"journal":{"name":"Proceedings of MILCOM '95","volume":"47 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-11-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117040297","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Secure communication between tactical and strategic networks","authors":"J. Bertrand, D. Caprioni, C. Haight","doi":"10.1109/MILCOM.1995.483436","DOIUrl":"https://doi.org/10.1109/MILCOM.1995.483436","url":null,"abstract":"The STU-III program has been very successful in providing secure, high quality communications. The STU-III program, however, has so far been restricted to strategic networks. Tactical networks use devices such as SINCGARS, VINSON, and MINTERM (tactical terminal) which can not interoperate with the STU-III network. The paper discusses the modifications to MINTERM that provide it with a STU-III-compatible mode. It is shown that most of the changes can be made in software and that the modified MINTERM can interoperate with the STU-III network over a large variety of media.","PeriodicalId":265124,"journal":{"name":"Proceedings of MILCOM '95","volume":"36 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-11-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117048339","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"An active squelch technique for HF communication systems","authors":"W. Furman, M. A. Wadsworth","doi":"10.1109/MILCOM.1995.483660","DOIUrl":"https://doi.org/10.1109/MILCOM.1995.483660","url":null,"abstract":"A reliable squelch feature has long been a difficult goal in the low signal to noise ratio and high interference environments typical of HF links. Many passive techniques have been attempted and implemented. These passive techniques range from simple power measurement to elaborate neural network based speech detection systems. All of these approaches suffer from a decrease in reliability as channel conditions degrade due to the presence of noise and interference. However, it is under these degraded channel conditions where a reliable squelch function is most desirable to reduce operator fatigue. In addition, a reliable squelch function can be useful in the implementation of HF/HF or HF/VHF automated re-transmission systems, or as the basis for a robust field radio wakeup feature. This paper will discuss the design and implementation of an HF squelch system based on a burst serial tone waveform that operates in low signal to noise ratio and high narrowband and impulsive interference environments. The paper will present our initial design goals, an implementation overview, and final system performance. Performance data, including the rate of false unsquelch occurrences and the probability of missed unsquelch in various channel conditions will also be presented.","PeriodicalId":265124,"journal":{"name":"Proceedings of MILCOM '95","volume":"23 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-11-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126690082","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Haiti: projecting tactical network and systems management","authors":"L. Averett, J. Knisley, M. A. Marvin","doi":"10.1109/MILCOM.1995.483431","DOIUrl":"https://doi.org/10.1109/MILCOM.1995.483431","url":null,"abstract":"The nature of recent military operations has been one of maximizing readiness (e.g., quick deployments) while minimizing in-theater personnel and equipment. Projecting technical expertise from the Continental United States (CONUS) to the deployed area of operations is critical to ensuring the success of the warfighter. Operation UPHOLD DEMOCRACY is the first of many opportunities to project tactical network and systems management (NSM) expertise from CONUS to tactical network managers and their respective tactical networks. NSM solutions were demonstrated and employed to provide remote monitoring and control capabilities from CONUS of the tactical packet network (TPN) and the mobile gateway van (MGV), both in Haiti. The TPN is the army tactical packet switched data network. The MGV provides users in the deployed tactical environment access to the non-classified Internet protocol router network (NIPRNET) for transmission of unclassified traffic. This paper will discuss the ways in which commercial off-the-shelf (COTS) NSM tools were used to manage the TPN and the MGV in support of operation UPHOLD DEMOCRACY. TPN management was accomplished using the integrated management system (IMS) application. An integrated set of COTS tools (Hewlett Packard Network Node Manager, Remedy Action Request System, and Cisco Systems CiscoWorks) have been configured to remotely manage the MGV in Haiti. Managing the TPN and MGV successfully demonstrate the technical feasibility of projecting NSM capabilities from CONUS to deployed tactical networks.","PeriodicalId":265124,"journal":{"name":"Proceedings of MILCOM '95","volume":"23 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-11-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123603322","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Application of trellis coded modulation to tactical troposcatter transmissions","authors":"P. Brelivet, Juing Fang, G. Vivier, P. Sehier","doi":"10.1109/MILCOM.1995.483625","DOIUrl":"https://doi.org/10.1109/MILCOM.1995.483625","url":null,"abstract":"This paper presents an optimized solution applicable to the transmission of data and radiotelephony at low data rates for troposcatter tactical transmissions. In the proposed system, diversity is obtained thanks to the association of frequency hopping, interleaving and efficient coding scheme. The latter uses an outer Reed-Solomon code concatenated with a TCM (trellis coded modulation) inner code. The presented approach is applied to the coherent demodulation of an 8-PSK modulation transmitted on a frequency and time non-selective Rayleigh channel. As a first step the most promising codes are selected based on an extensive bibliographical research. As a second step, the overall performance is evaluated using computer simulations including the effects of imperfect channel estimation and non-ideal interleaving. It is shown that the proposed solution fulfils all the requirements (particularly those relative to the maximal transmission end to end delay).","PeriodicalId":265124,"journal":{"name":"Proceedings of MILCOM '95","volume":"66 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-11-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126235362","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Enhancing the performance of C/sup 3/ traffic in a real-time, distributed Ada application through the use of scheduling algorithms","authors":"T.B. Maples, S. Myers, V. Tran","doi":"10.1109/MILCOM.1995.483430","DOIUrl":"https://doi.org/10.1109/MILCOM.1995.483430","url":null,"abstract":"A realistic, real-world distributed Ada application-taken from a current US government project requiring real-time C/sup 3/ traffic-is used as the model for multimedia traffic. The traffic modelled has three characteristics typical of the traffic requirements of many existing C/sup 3/ systems: (1) real-time constraints, (2) continuous, as well as, bursty, traffic generation at different frequencies, and (3) varying semantic priority classes. We present a simulation study which explores the way real-time scheduling algorithms can be used to enhance the performance of real-time, distributed C/sup 3/ traffic. Throughout the simulation, existing standards are utilized whenever possible. For example, the standard ATM network protocol is used, and the real-time scheduling algorithms used are selected from among those in current use.","PeriodicalId":265124,"journal":{"name":"Proceedings of MILCOM '95","volume":"23 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-11-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125601288","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A fully automatic bit error rate tester for Satcom modems","authors":"N. Frall","doi":"10.1109/MILCOM.1995.483663","DOIUrl":"https://doi.org/10.1109/MILCOM.1995.483663","url":null,"abstract":"When measuring the bit error rate (BER) performance of Satcom modems operating at telegraph rates, or the sub-telegraph rates employed by some military AJ modems, the size of the sample of bits that must be measured to ensure statistical significance of the error rate calculation is prohibitively large. This problem coupled with the need to provide stable levels of noise and signal, accurate over such a long period of time has led to the development of an automatic bit error rate tester (ABERT) by the UK Defence Research Agency.","PeriodicalId":265124,"journal":{"name":"Proceedings of MILCOM '95","volume":"59 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-11-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130469556","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"End-to-end security for commercial PCS networks","authors":"D. Weissman, D.W. Dudich, M. Grob","doi":"10.1109/MILCOM.1995.483696","DOIUrl":"https://doi.org/10.1109/MILCOM.1995.483696","url":null,"abstract":"The emergence of second and third generation commercial mobile telecommunications networks poses numerous technical challenges to maintain connectivity of existing COMSEC services, in particular STU-III (U.S. Government third generation secure terminal unit) services, for cellular and PCS users. This paper highlights the progress being made in the North American wireless standards forums to define common solutions for interoperable data services, which include STU-III end-to-end secure voice and data modes as part of the commercial link offerings. The issues associated with the evolution from analog to digital mobile networks and the implications for existing secure applications are discussed. We then point out the importance of the secure wireless activities as it is expected that PCS, digital cellular, and mobile satellite services will become part of the common infrastructures for COMSEC over commercial and military networks.","PeriodicalId":265124,"journal":{"name":"Proceedings of MILCOM '95","volume":"110 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-11-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133880245","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Implementing the Defense Message System","authors":"G.B. Meyrick, S. McDermott","doi":"10.1109/MILCOM.1995.483500","DOIUrl":"https://doi.org/10.1109/MILCOM.1995.483500","url":null,"abstract":"Upon final award of the Defense Message System (DMS) contract, a vast implementation effort will be initiated to deploy DMS-compliant messaging to more than 1.5 million Department of Defense (DoD) users. The implementation strategy for this large deployment calls for fielding the capability in several increments. Initial deployment will be limited to sensitive-but-unclassified message traffic, with support for classified messaging being added when the appropriate security mechanisms are available. Due to the magnitude of the Defense Message System program, the DoD will conduct an operational test and evaluation (OT&E) prior to full-rate deployment of each major enhancement. In support of the initial operational test and evaluation (IOT&E), the DoD will deploy DMS-compliant components at several sites throughout the world. This IOT&E will ensure that the DMS meets the DoD electronic messaging requirements. This paper describes the general strategy of the DMS implementation, the actions already taken, and the anticipated issues and challenges facing full-rate deployment.","PeriodicalId":265124,"journal":{"name":"Proceedings of MILCOM '95","volume":"212 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-11-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133787815","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}