{"title":"BIODIESEL PRODUCTION FROM SUDANESE JATROPHA CURCAS SEED BY THE ALKALI-CATALYZED TRANSESTERIFICATION PROCESS AND ITS ANALYSIS BY GAS CHROMATOGRAPHY","authors":"Arij Mahmoud Ahmed Abdalla, H. Rusli, M. B. Amran","doi":"10.33751/helium.v2i2.6338","DOIUrl":"https://doi.org/10.33751/helium.v2i2.6338","url":null,"abstract":"Sudan is highly dependent on diesel. Diesel is used in agriculture machines, transportation, and other applications. This study has been carried out to produced biodiesel from Jatropha curcas seed oil. Jatropha was chosen because it is not edible, therefore it will not pose a new problem to humans regarding food competition. This research successfully extracted oil from Jatropha curcas seed using n-hexane solvent with yield 39%. The oil than converted to biodiesel by alkaline transesterification process with a conversion yield 92 %. The properties such as flash point, acid value, viscosity, iodine value, density, copper corrosion, cetane number, sulphated ash, pour point, free glycerol, and total glycerol contents were 174 oC, 0.17 mg KOH/g, 8.912 mm2/s, 102 g I2/100 g, 895.8 kg/m3, class1, 51, 0.0047 %, -3 oC, 0.01 %,0.03 %, respectively. These quantities obtained were met most of the biodiesel standards that are ASTM D6751, EN14214, and ASTM D975. The GC data showed the fatty acid methyl ester (FAME) has a 12-20 carbon chain and still has monoglycerides, diglycerides, and triglycerides.","PeriodicalId":257181,"journal":{"name":"Helium: Journal of Science and Applied Chemistry","volume":"116 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122321014","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Dessy Nur Indryastuti, A. Iryani, Muhammad Jundi Fathurrahman
{"title":"COMPARISON OF ANALYSIS RESULTS OF pH, TSS, COD AND AMMONIA IN INDUSTRY WASTEWATER WITH SPARING AND SNI METHODS","authors":"Dessy Nur Indryastuti, A. Iryani, Muhammad Jundi Fathurrahman","doi":"10.33751/helium.v2i2.6342","DOIUrl":"https://doi.org/10.33751/helium.v2i2.6342","url":null,"abstract":"Sparing is a development of sensor technology to monitoring wastewater quality continuously and online, so it can be done in real time. Wastewater quality monitoring carried out in the laboratory using the SNI method still has several drawbacks, including large analysis costs, long analysis time and the use of chemicals that are not environmentally friendly. This study aims to determine the differences in the results of the analysis of the Sparing method with SNI on the parameters of pH, TSS, COD, and ammonia in the EWTP wastewater of PT \"X\" using statistical processing through the F-test and T-test. The research stages include sampling, sample storage and analysis in the laboratory. Based on the results of the study, it can be concluded that the differences in the method of Sparing analysis and SNI are not significantly different to the pH parameters in the measurement range 6.77 - 6.88; TSS in the measurement range 9.486 - 12.343 mg/L; COD in the measurement range of 55.402 - 59.274 mg/L and ammonia in the measurement range of 0.368 - 0.405 mg/L. This proves that the Sparing method can replace the SNI method for routinely monitoring the quality of EWTP wastewater of PT \"X\".","PeriodicalId":257181,"journal":{"name":"Helium: Journal of Science and Applied Chemistry","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-01-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128243254","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Novi Nuraeni, Arkhi Yuvie, P. Pratama, D. Herianti, V. Kusumaningtyas, Jasmansyah Jasmansyah
{"title":"ANTIFUNGAL AND WOUND HEALING ACTIVITIES OF CHITOSAN NANOPARTICLES FROM GREEN MUSSEL SHELL (Perna viridis) AND JERNANG (Daemonorops draco) ETHANOL EXTRACT DRESSING PATCH","authors":"Novi Nuraeni, Arkhi Yuvie, P. Pratama, D. Herianti, V. Kusumaningtyas, Jasmansyah Jasmansyah","doi":"10.33751/helium.v2i2.6343","DOIUrl":"https://doi.org/10.33751/helium.v2i2.6343","url":null,"abstract":"The development of chitosan nanoparticles and jernang (Daemonorops draco) as wound medicine materials have received a lot of attention from researchers. In this research the two materials will be combined. The antifungal of the materials determined based on inhibition test of Candida albicans and Malassezia furfur. The wound healing activities determined based on the in vivo wound healing test on Wistar rat (Rattus novergicus). The materials applicated on wound dressing patch. Chitosan was sinthesized from green mussels shell waste (Perna viridis L). The result showed that the yield of chitosan was 64.67% and degree of deacetylation (DD) was 69.53%. Meanwhile, chitosan nanoparticles can be prepared based on ball mill process. The result showed that average of the particles size was 437.6 nm (nanoparticles size is 1-1000 nm). Jernang was obtained by maseration process using ethanol organic solvents technical. The yield was 22.41% and showed positively of alkaloid, saponin, flavonoid and triterpenoid test. F3 has highest activies on antifungal and wound healing test results. ","PeriodicalId":257181,"journal":{"name":"Helium: Journal of Science and Applied Chemistry","volume":"29 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128810182","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Nila Tanyela Berghuis, Ana Farida, Sayyida Afifa, Mazaya Aurora, Brikita Eusebes, Salsafia Putri
{"title":"REFINING AND ANALYSIS OF COOKING OIL (WASTE COOKING OIL) USING RICE WITH THE BATCH METHOD","authors":"Nila Tanyela Berghuis, Ana Farida, Sayyida Afifa, Mazaya Aurora, Brikita Eusebes, Salsafia Putri","doi":"10.33751/helium.v2i2.6202","DOIUrl":"https://doi.org/10.33751/helium.v2i2.6202","url":null,"abstract":"The regular use of waste cooking oil, which has a high level of free fatty acids and carbonyl and peroxide compounds, is the background of this study, which is harmful to one's health. Using it indefinitely will harm health, including cancer, heart disease, and possibly death. We, therefore, performed research on the purification and analysis of waste cooking oil using white rice and aking rice with the batch method to detect the free fatty acid levels before and after purification and to establish the effectiveness of white rice and aking rice. Determine the utilized cooking oil's quality following filtration using adsorbent. The findings demonstrated that white rice was more effective than aking rice at reducing fatty acid levels, as shown by the acquisition of FFA levels using white rice of 0.3141% in the merchant oil sample and 0.2410% in the home oil sample. In comparison, purification with the aking rice adsorbent is 0.3474% in the merchant oil sample and 0.1374% in the home oil sample.","PeriodicalId":257181,"journal":{"name":"Helium: Journal of Science and Applied Chemistry","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128703853","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"FORTIFICATION OF PROTEIN HYDROLYZATE OF MUJAIR FISH (Tilapia mossambica) IN EYEK-ENYEK (Cassava crackers)","authors":"E. Herlina, F. Nuraeni, Aldi Alhadid","doi":"10.33751/helium.v2i2.6185","DOIUrl":"https://doi.org/10.33751/helium.v2i2.6185","url":null,"abstract":"This study aims to determine the best-enriched formula for tilapia fish using an analysis of chemical and organoleptic characteristics. The research was carried out at the Chemical Laboratory of Pakuan University, Bogor from March to May 2021. The method used was an experimental method with six additional treatments of tilapia protein hydrolyzate, namely 0%, 2.5%, 5%, 7.5%, 10% and 12.5% with 20 semi-trained panelists as replicates. The observed variables consisted of the hydrolyzed protein yield of African catfish, the panelists' preference for color, texture, and taste of geeks, and a proximate test on water content, ash content and insoluble ash in acids, proteins, fats, and carbohydrates. The level of liking was calculated by Friedman Test, after which followed by Bayes Test to find out the best formula with the addition of tilapia fish protein hydrolyzate. The results showed that the addition of tilapia protein hydrolyzate in the research was still considered favorable, but the preferred treatment was the addition of 5% tilapia protein hydrolyzate, from some characteristics such as: better appearance, better texture, taste and aroma 7 (preferred), moisture 6.1% content, ash content 1.9%, acid insoluble ash content 0.17%, protein content 6.2%, and carbohydrates content 84.9%.","PeriodicalId":257181,"journal":{"name":"Helium: Journal of Science and Applied Chemistry","volume":"19 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131869327","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Fitra Rachmalia, Muhammad Jundi Fathurrahman, S. Sutanto
{"title":"Optimization of Adsorption of Eugenol-Silica Gel Composites to Metal Ions Cu (II) Using Box Behnken Method","authors":"Fitra Rachmalia, Muhammad Jundi Fathurrahman, S. Sutanto","doi":"10.33751/helium.v2i1.5483","DOIUrl":"https://doi.org/10.33751/helium.v2i1.5483","url":null,"abstract":"Silica gel can be used as an absorbent so that it can also be used as a process for making eugenol-silica gel composites. This study aims to optimize the adsorption of the eugenol-silica gel composite to Cu (II) metal ions and to determine the maximum absorption capacity and adsorption constant of the Langmuir and Freundlich isotherm model. This research begins with determining the optimization of contact time 10-60 minutes, temperature 20-45 oC and the weight of the adsorbent is carried out in the range of 0.10-0.20 grams in a 50 mL solution and the experimental design of the box Behnken method will determine three variables through (Response Surface Methodology). Furthermore, the determination of Cu levels by preparing 100 ppm Cu mother liquor, making a standard series, and testing with Atomic Absorption Spectroscopy (AAS), and then determination of Langmuir and Freundlich adsorption isotherms. The results showed that the optimum conditions for the adsorption process using Response Surface Methodology (RSM) were at a contact time of 30 minutes, a temperature of 45 oC with an adsorbent weight of 0.10 grams in a 50 mL solution, in Langmuir and Freundlich isothermal adsorption. The adsorption process takes place in two directions (reversible) the values of Kf, b and n are 8331; -5.2224 and -0.4541. The adsorption process takes place in two directions (reversible) the values of Kf, b and n are 8331; -5.2224 and -0.4541. The adsorption process takes place in two directions (reversible) the values of Kf, b and n are 8331; -5.2224 and -0.4541.","PeriodicalId":257181,"journal":{"name":"Helium: Journal of Science and Applied Chemistry","volume":"61 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-07-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123878484","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
S. Kholisoh, Intan Wulandari, A. Iryani, S. Sutanto, S. Warnasih
{"title":"Characterization of Batik Industrial Wastewater in Bogor City","authors":"S. Kholisoh, Intan Wulandari, A. Iryani, S. Sutanto, S. Warnasih","doi":"10.33751/helium.v2i1.5371","DOIUrl":"https://doi.org/10.33751/helium.v2i1.5371","url":null,"abstract":"Wastewater from the batik industry in Bogor City is the most waste produced from the dyeing process. The batik industry produces waste with concentrated color due to the high concentration of color content from the dyeing process. This affects water bodies as a direct disposal site for waste. Batik waste also has the potential to contain heavy metal compounds derived from the composition of dyes. This will have an impact on the disruption of the balance in the environment around the industry. Therefore, it is necessary to characterize batik wastewater to determine the pollutant content. This research aims to characterize the batik industry wastewater in the city of Bogor by measuring the levels of COD, BOD, TSS, pH, temperature, total chromium content, total phenol content, and sulfide content according to the parameters P.16/MENLKH/SETJEN /KUM.1/4/2019. The results showed the characteristics of the wastewater from the batik industry in Bogor City with levels of COD in dyeing waste at 797 mg/L and total waste at 52463 mg/L, BOD levels in dyeing waste at 431 mg/L, and total waste at 238 mg/L. TSS in the dyeing waste is 706.5 mg/L and the total waste is 3679 mg/L, the temperature in the dyeing waste is 26.9 °C and the total waste is 26.3°C, pH in staining waste at 1.62 and total waste at 6.82; the total chromium content in the staining waste was 2.62 mg/L and the total waste was 940.2 mg/L, the total phenol content and sulfide content in the dyeing waste and total waste was not detected. The characteristics of batik waste are not by the established quality standards, so there is a need for processing before the waste is discharged into the environment.","PeriodicalId":257181,"journal":{"name":"Helium: Journal of Science and Applied Chemistry","volume":"42 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-07-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133112326","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
A. Puspitasari, S. Sutanto, Linda Jati Kusumawadani
{"title":"Development of A Hybrid Method by Integrating Electrocoagulation Countinous System with Activated Charcoal Adsorption to Treat Sago Wastewater","authors":"A. Puspitasari, S. Sutanto, Linda Jati Kusumawadani","doi":"10.33751/helium.v2i1.5482","DOIUrl":"https://doi.org/10.33751/helium.v2i1.5482","url":null,"abstract":"Wastewater from the sago industry can pose a risk of pollution because it contains chemicals such as high organic matter content, fiber, 4% unextracted starch, nitrogen solution, and cyanoglucoside which are difficult to degrade in the environment. Sago wastewater is generally acidic, has foul smells, and has a high solids concentration. In this study, a hybrid method using electrocoagulation continuous system and activated carbon adsorption was developed to decrease organic and inorganic contaminates which considered importand environmental concern. These two methods have the advantages of simple equipment, easy operation, low efficiency, and short reaction time. The flow rate will affect the pause time of the sample in the reactor. The longer the pause time, feeding will lead to an increase in the level of turbidity that can be lowered. Industrial wastewater variations in the initial analysis then carried out the electrocoagulation process in a continuous system with a container capacity of 1680 mL with an electrode distance of 2 cm, a voltage of 18 volts, and wastewater into a container with a flow rate of 1 mL/, 2 mL/second, 3 mL/ sec, 4 mL/sec, and 5 mL/sec. In addition, the waste is directly into a container containing charcoal. The parameters studied were COD, BOD, TSS, TDS, KMnO4, DO, pH, DHL, and Al concentration analysis with Atomic Absorption Spectrophotometer, odor, and color analysis. The maximum removal efficiency for TDS, TSS. COD, BOD, TDS, KMnO4 were 81.16%, 87.58%, 91.32%, 48.66%, 99.07%, for a flow rate of 1 mL/second, also other parameters also met have met the quality standards set by PerMenLH No. 5. ","PeriodicalId":257181,"journal":{"name":"Helium: Journal of Science and Applied Chemistry","volume":"23 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126667877","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Antioxidant Activity Test from Vegetable Tomato (Solanum lycopersicum) and Cherry Tomato (Solanum lycopersicum var. Cerasiforme) in Hand and Body Cream","authors":"F. Nuraeni, L. Heliawati, Melani Nurastuti","doi":"10.33751/helium.v2i1.5302","DOIUrl":"https://doi.org/10.33751/helium.v2i1.5302","url":null,"abstract":"Dry, scaly, rough skin conditions accompanied by wrinkles and black spots characterize the skin that experiences premature aging. One of the causes of premature aging is free radicals. These free radicals can be overcome with natural or artificial antioxidants. Natural antioxidants are found in fruits and vegetables, one of which is tomatoes. Tomatoes in direct use are less effective, so they are made in the form of hand and body cream. Production of vegetable tomato and cherry tomato extracts fruit extraction and maceration using 96% ethanol, then concentrated with a rotary evaporator until the extract is thick. The extracts of vegetable tomatoes and cherry tomatoes were then tested for phytochemical, antioxidant activity, and identification of compounds with LC-MS, then applied to hand and body cream with a concentration of 1% and 3% with codes F0, F1, F2, F3, and F4. Hand and body cream of tomato extract are tested by measuring pH, viscosity, specific gravity, total microbial Contamination, homogeneity and testing for antioxidant activity using the DPPH method. Phytochemical test results showed that flavonoid compounds were present in both extracts. The antioxidant activity of vegetable tomato ethanol extract was obtained with an IC50 value of 947.81ppm, and an IC50 value of 473.51 ppm was obtained for cherry tomato extract. From the LC-MS analysis, the compounds contained in cherry tomatoes, namely esculeoside A and B as cytotoxic activity, dehydrotomat as an antibacterial, kaempferol-3-O-rutinoside as an antioxidant, and tomatidine as an antibiotic. Antioxidant activity of hand and body cream, hand and body cream F4 (964.05 ppm), hand and body cream F3 (1001.97 ppm), hand and body cream F2 (1033.73 ppm), hand body cream F1 (1036.61 ppm), and hand and body cream F0 (1486.14 ppm). Hand and body cream cherry tomato extract 3%, formula 4 (F4), has the highest antioxidant activity. It can be concluded that the addition of extract concentration affects the antioxidant activity value of hand and body cream. Body cream F2 (1033.73 ppm), hand body cream F1 (1036.61 ppm), and hand and body cream F0 (1486.14 ppm). Hand and body cream cherry tomato extract 3%, formula 4 (F4), has the highest antioxidant activity. It can be concluded that the addition of extract concentration affects the antioxidant activity value of hand and body cream. Body cream F2 (1033.73 ppm), hand body cream F1 (1036.61 ppm), and hand and body cream F0 (1486.14 ppm). Hand and body cream cherry tomato extract 3%, formula 4 (F4), has the highest antioxidant activity. It can be concluded that the addition of extract concentration affects the antioxidant activity value of hand and body cream.","PeriodicalId":257181,"journal":{"name":"Helium: Journal of Science and Applied Chemistry","volume":"18 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125444024","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Hg (II) and Cd (II) Heavy Metal Ions Detection Based On Fluorescence Using Zn (II) Metal Ion Complex with Pyrazoline Derivatives Ligand","authors":"Y. Syahputri, S. Sutanto, Riza Shabrina Zamzani","doi":"10.33751/helium.v2i1.5407","DOIUrl":"https://doi.org/10.33751/helium.v2i1.5407","url":null,"abstract":"Pyrazoline derivatives can be used as ligands because they have photophysical properties and can chelate metal ions which cause very strong absorption, emission and have a fluorescence properties. Therefore, in recent years, pyrazoline ligands and their derivatives have been widely used for chemosensors. This research aims to detect fluorescence-based heavy metal ions Hg2+ and Cd2+ using a metal ion complex compound Zn2+ with pyrazoline derivative ligand. The research was started by synthesizing pyrazoline-derived ligands, then synthesizing complex compounds. Complex compounds were characterized using Fourier Transform Infra Red (FTIR), UV-Vis Spectrophotometer, and Spectrofluorometer. Then, a fluorescence study was carried out to determine the type of fluorosensor for complex compounds with the addition of heavy metal ions Cd2+ and Hg2+. The last stage is UV-Vis spectroscopy study on the addition of heavy metal ions Hg2+ and Cd2+. Pyrazoline derivative ligand obtained as para-di-2-(1-phenyl-3-pyridyl-4,5-dihydro-1H-pyrazole-5-yl)benzene is a yellow solid. The metal ion complex compound Zn2+ with pyrazolin derivative ligand is a brown colored compound, has a yield of 45 % and a melting point is 245 oC. The FTIR spectrum showed the presence of functional groups such as amine, C-H aromatic, C=N, C=C aromatic, C-N, Zn-N and Zn-Cl. Analysis with UV-Vis spectrophotometer showed that there was a shift in the maximum wavelength from the ligand to the Zn(II)-ligand complex, namely 240 nm to 246 nm and 363 nm with molar absorptivity values (log ) of 4.56 and 4.28, respectively. For fluorescence analysis, two absorbance peaks were obtained, namely at a wavelength of 370 nm with an intensity of 3644 a.u and 478 m at 8216 a.u. The results of fluorescence chemosensor studies on the addition of heavy metal ions Hg2+ and Cd2+ showed that the metal ion complex compound Zn2+ with pyrazoline-derived ligands can detect heavy metal ions Hg2+ and Cd2+ with a turn-on type.","PeriodicalId":257181,"journal":{"name":"Helium: Journal of Science and Applied Chemistry","volume":"47 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2022-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132168184","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}