Proceedings of the 5th World Congress on Civil, Structural, and Environmental Engineering最新文献

筛选
英文 中文
Extended application of the Equivalent Mortar Volume mix designmethod for recycled aggregate concrete 等效砂浆体积配合比设计方法在再生骨料混凝土中的推广应用
E. E. Anike, M. Saidani, A. Olubanwo, Mark Tyrer
{"title":"Extended application of the Equivalent Mortar Volume mix design\u0000method for recycled aggregate concrete","authors":"E. E. Anike, M. Saidani, A. Olubanwo, Mark Tyrer","doi":"10.11159/icsect20.132","DOIUrl":"https://doi.org/10.11159/icsect20.132","url":null,"abstract":"This paper presents the study carried out using the extended Equivalent Mortar Volume (EMV) mix design technique, for concrete made of recycled aggregates (RA) and steel fibre (SF). The expansion of the EMV approach is necessary to encourage the use of fine recycled aggregates (FRA) in concrete manufacture. To this end, the same replacement ratio obtained for coarse recycled aggregates (CRA) using the EMV principles, was applied to the FRA for concrete production. Furthermore, SF was added to improve the mechanical behaviour of RA-concrete developed with this method. Altogether, four mixes were developed using a constant waterto-cement ratio of 0.42 thus: reference mix labelled conventional concrete (CC) prepared with natural aggregates (NA); crushed aggregate concrete (CAC) mix designed with the conventional method and made of 100% RA; blended aggregate concrete (BAC) mix prepared with the EMV guide and composed of both NA and RA; and steel fibre-reinforced blended aggregate concrete (SFRBAC) mix prepared by adding optimum SF to the BAC mix. Then, cubical, cylindrical and prismatic specimens were produced from the mixes to investigate different properties of concrete. The experimental results show that the mechanical properties of concrete are not adversely affected by the presence of FRA. Also, the EMV mix design provision offers a better result than its companion conventional approach, even with about 30% reduction in cement content. The addition of SF mainly controlled crack development and induced a ductile failure mode.","PeriodicalId":243272,"journal":{"name":"Proceedings of the 5th World Congress on Civil, Structural, and Environmental Engineering","volume":"21 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122831762","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
Mineral Slag used as an Alternative of Cement in Concrete 矿渣在混凝土中替代水泥的研究
Eskinder Desta Shumuye, Jun Zhao, Zike Wang
{"title":"Mineral Slag used as an Alternative of Cement in Concrete","authors":"Eskinder Desta Shumuye, Jun Zhao, Zike Wang","doi":"10.11159/icsect20.166","DOIUrl":"https://doi.org/10.11159/icsect20.166","url":null,"abstract":"This paper summarizes the results of experimental studies carried out at Zhengzhou University, school of Mechanics and Engineering Science, research laboratory, on the performance of concrete produced by combining ordinary Portland cement (OPC) with ground-granulated blast furnace slag (GGBS). Concrete specimens cast with OPC and various percentage of GGBS (0%, 30%, 50%, and 70%) were subjected to high temperature exposure and extensive experimental test reproducing basic freeze-thaw cycle and a chloride-ion attack to determine their combined effects within the concrete samples. From the experimental studies comparisons were made on the physical, mechanical, and microstructural properties in compassion with ordinary Portland cement concrete (OPC). Further, durability of GGBS cement concrete such as exposure to chloride ion attack and freeze–thaw action in compassion with various percentage of GGBS and ordinary Portland cement concrete of similar mixture composition were analyzed. The microstructure, mineralogical composition, and pore size distribution of concrete specimens were determined via Scanning electron microscopy analysis (SEM), and X-ray diffraction (XRD). The result demonstrated that when the exposure temperature increases from 200 oC to 400 oC, the residual compressive strength was fluctuating for all concrete group; and compressive strength and chloride ion exposure of the concrete decreased with the increasing of slag content. The SEM and EDS results showed an increase in carbonation rate with increasing of slag content.","PeriodicalId":243272,"journal":{"name":"Proceedings of the 5th World Congress on Civil, Structural, and Environmental Engineering","volume":"33 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122198738","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
The Effect of Polypropylene and Steel Fibers on the EngineeringProperties of Concrete 聚丙烯和钢纤维对混凝土工程性能的影响
Tarig M. A. Ahmed, Abid AbuTai
{"title":"The Effect of Polypropylene and Steel Fibers on the Engineering\u0000Properties of Concrete","authors":"Tarig M. A. Ahmed, Abid AbuTai","doi":"10.11159/icgre20.198","DOIUrl":"https://doi.org/10.11159/icgre20.198","url":null,"abstract":"","PeriodicalId":243272,"journal":{"name":"Proceedings of the 5th World Congress on Civil, Structural, and Environmental Engineering","volume":"245 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134024692","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Production Planning of Free-form Concrete Panels using 3D PlasteringTechnology 使用3D抹灰技术的自由形式混凝土板的生产计划
S.-W. Son, J. Oh, K. Park, Sunkuk Kim
{"title":"Production Planning of Free-form Concrete Panels using 3D Plastering\u0000Technology","authors":"S.-W. Son, J. Oh, K. Park, Sunkuk Kim","doi":"10.11159/icsect20.133","DOIUrl":"https://doi.org/10.11159/icsect20.133","url":null,"abstract":"A technology has been developed to produce low-cost high-quality FCP (free-form concrete panel) using materials such as glass and pulp. However, FCP production and installation should meet required schedules in order for such technological development to be applied in practice. If it is not possible for the production to satisfy the installation schedules, sufficient lead time should be granted; otherwise, an additional 3D plastering machine is required. This then would give rise to cost and time conflicts. Therefore, an analysis on processes and influential factors relating to FCP production-installation is necessary after which algorithms should be created to link these processes and factors in a systematic method. This study is aimed at production planning of free-form concrete panels using 3D plastering technology. For the purpose of this study, an influential factor analysis and production planning shall be performed in a phased approach. The results of this study are expected to be used as a crucial reference in developing models that can simulate FCP productioninstallation in various ways.","PeriodicalId":243272,"journal":{"name":"Proceedings of the 5th World Congress on Civil, Structural, and Environmental Engineering","volume":"50 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134634456","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Simplified Procedures for a Peruvian Standard of Analysis and Designof Buildings with Energy Dissipation Systems 秘鲁建筑耗能系统分析与设计标准简化程序
Juan C. Fuentes, A. Muñoz
{"title":"Simplified Procedures for a Peruvian Standard of Analysis and Design\u0000of Buildings with Energy Dissipation Systems","authors":"Juan C. Fuentes, A. Muñoz","doi":"10.11159/icsect20.112","DOIUrl":"https://doi.org/10.11159/icsect20.112","url":null,"abstract":"The application of the simplified procedures of Chapter 18 of ASCE 7-16 is studied together with the seismic Peruvian E.030 standard for the design of new buildings with energy dissipation systems in Peru. An example of design for the seismic force-resisting system of a 5-story reinforced concrete building with fluid viscous dampers located in the city of Lima is developed. The analyses performed show that it is possible to reduce the dimensions of the structural elements of the corresponding undamped original building, while controlling the story drifts and deformations as required by the E.030 standard. The results of the proposed methods were compared with the results of nonlinear time-history analyses and in general conservative predictions of maximum roof displacements, story drifts and base shears were obtained.","PeriodicalId":243272,"journal":{"name":"Proceedings of the 5th World Congress on Civil, Structural, and Environmental Engineering","volume":"45 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116295112","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Nonlinear solitary waves for the nondestructive evaluation of concrete 混凝土无损评价中的非线性孤立波
P. Rizzo
{"title":"Nonlinear solitary waves for the nondestructive evaluation of concrete","authors":"P. Rizzo","doi":"10.11159/icsect20.03","DOIUrl":"https://doi.org/10.11159/icsect20.03","url":null,"abstract":"In the last two decades it has been demonstrated that highly nonlinear solitary waves (HNSWs) propagating in chains of granular particles can be used in many physics and engineering applications, including acoustic lenses, impurity detectors, and nondestructive evaluation (NDE). HNSWs are compact nondispersive waves that propagate in nonlinear medium such as 1D chains of spherical particles. In this talk the application of HNSWs for the nondestructive evaluation (NDE) of concrete material is presented. The non-invasive assessment of cement and concrete strength are discussed to describe how the solitary waves can be used to monitor curing, estimate the strength of concrete, or detect the presence of excessive water.","PeriodicalId":243272,"journal":{"name":"Proceedings of the 5th World Congress on Civil, Structural, and Environmental Engineering","volume":"314 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123228920","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Predicting the Bond Strength of thin Steel Rebars in Concrete byMeans of Artificial Neural Networks 用人工神经网络预测混凝土中薄钢筋的粘结强度
Priscila F. S. Silva, G. Moita, E. P. Carvalho
{"title":"Predicting the Bond Strength of thin Steel Rebars in Concrete by\u0000Means of Artificial Neural Networks","authors":"Priscila F. S. Silva, G. Moita, E. P. Carvalho","doi":"10.11159/icsect20.165","DOIUrl":"https://doi.org/10.11159/icsect20.165","url":null,"abstract":"The bond strength between steel bars and concrete is one of the essential aspects of reinforced concrete structures and is generally affected by several factors. In this study, an experimental data set of 89 pull-out specimens was used to develop an artificial neural network (ANN). The data used in the modelling was arranged as 4 input parameters: bar surface, bar diameter ( ), concrete compressive strength ( c f ) and the anchorage length ( d L ). A comparative analysis was also conducted using the developed ANN model to establish the trend of the main influence variables on the bond capacity. The root mean squared error (RMSE) for the maximum applied load in the pull-out test, found on the testing data, was equal to 1.088 KN, and the R-squared was equal to 0.969, for the proposed ANN model. Moreover, the study concluded that the proposed could be used to predicts the bond strength of thin bars.","PeriodicalId":243272,"journal":{"name":"Proceedings of the 5th World Congress on Civil, Structural, and Environmental Engineering","volume":"49 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128872466","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
HBIM Application to Historical Steel Structures: the Case Study ofLapela Bridge HBIM在历史钢结构中的应用:以flapela大桥为例
I. D. Río, M. Cabaleiro, B. Conde, B. Riveiro, J. Caamaño
{"title":"HBIM Application to Historical Steel Structures: the Case Study of\u0000Lapela Bridge","authors":"I. D. Río, M. Cabaleiro, B. Conde, B. Riveiro, J. Caamaño","doi":"10.11159/icsect20.160","DOIUrl":"https://doi.org/10.11159/icsect20.160","url":null,"abstract":"- Historical steel structures are present all around the world. Besides being a common part of the cultural heritage, many of them are still in service. As an example, we can cite the case of riveted bridges, railway stations, exhibition pavilions, or industrial buildings. The maintenance of these ancient constructions is crucial since they are prone to have suffered significant damage over time due to effects such as corrosion, human actions, or the exposure to heavy loads for which they were not originally conceived. Further, in many cases, these steel structures have to be strengthened in order to adapt them to new uses. HBIM (Historical Buildings Information Modeling) is a new methodology in structural design and construction that could be used as the ideal tool for the maintenance management of these historical structures. HBIM technology is adopted in this paper for structural engineering purposes. Departing from the geometric survey carried out by terrestrial laser scanning, a 3D model is obtained which apart of gathering the main dimensions and details regarding the composition of the structure, it allows collecting all the information concerning the deterioration grade or the different inspections and retrofitting actions performed over time. Thus, by introducing different time stages in the 3D model, the evolution of the structural health over time can be analyzed, which allows the decision-making regarding maintenance and, if required, the undertaking of repairing works. The proposed methodology will be applied to the case study of the Lapela Bridge, in Portugal.","PeriodicalId":243272,"journal":{"name":"Proceedings of the 5th World Congress on Civil, Structural, and Environmental Engineering","volume":"16 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131770223","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
Environmental Behavior among Higher Education Students 高等教育学生环境行为研究
Sara Sousa, Elisabete Correia, Joana Leite, C. Viseu
{"title":"Environmental Behavior among Higher Education Students","authors":"Sara Sousa, Elisabete Correia, Joana Leite, C. Viseu","doi":"10.11159/iceptp20.155","DOIUrl":"https://doi.org/10.11159/iceptp20.155","url":null,"abstract":"1 Coimbra Business School│ISCAC, Polytechnic Institute of Coimbra and CERNAS Quinta Agrícola Bencanta 3040-316 Coimbra, Portugal ssousa@iscac.pt Coimbra Business School│ISCAC, Polytechnic Institute of Coimbra and CEFAGE, Quinta Agrícola Bencanta 3040-316 Coimbra, Portugal ecorreia@iscac.pt Coimbra Business School│ISCAC, Polytechnic Institute of Coimbra and CMUC Quinta Agrícola Bencanta 3040-316 Coimbra, Portugal jleite@iscac.pt Coimbra Business School│ISCAC, Polytechnic Institute of Coimbra and CICF Quinta Agrícola Bencanta 3040-316 Coimbra, Portugal cviseu@iscac.pt","PeriodicalId":243272,"journal":{"name":"Proceedings of the 5th World Congress on Civil, Structural, and Environmental Engineering","volume":"62 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134445261","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Characterization of Ancient Cob Wall of Madagascar for PotentialGreen and Economical Construction 马达加斯加古岩芯墙的绿色和经济建设潜力
Andriamalala Anjaramanantenasoa a Nirina Miraniaina, Ratoarivelo Manitriniala, G. Rajeshwar, Andriamahefa Augustin
{"title":"Characterization of Ancient Cob Wall of Madagascar for Potential\u0000Green and Economical Construction","authors":"Andriamalala Anjaramanantenasoa a Nirina Miraniaina, Ratoarivelo Manitriniala, G. Rajeshwar, Andriamahefa Augustin","doi":"10.11159/icgre20.154","DOIUrl":"https://doi.org/10.11159/icgre20.154","url":null,"abstract":"","PeriodicalId":243272,"journal":{"name":"Proceedings of the 5th World Congress on Civil, Structural, and Environmental Engineering","volume":"9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115083372","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书