{"title":"Using PIC18 Microcontrollers to Generate Chaotic Signals Based on Logistic Mapping","authors":"O. Hres, A. Veryha, Halyna Lastivka","doi":"10.31861/sisiot2023.1.01012","DOIUrl":"https://doi.org/10.31861/sisiot2023.1.01012","url":null,"abstract":"In this paper, simulation and hardware implementation of the device for generating chaotic signals based on logistic mapping using microcontrollers of the РІС18 series was carried out. The operation of the device was investigated in the mode of generating chaotic oscillations at different values of the control parameter λ. By certain hardware and software modification, this generator can be used as a voice signal encryption The results of simulation and experimental studies confirm the possibility of using PIC18 microcontrollers for the implementation of chaotic oscillation generators based on discrete mappings, as well as using these controllers in the hardware implementation of language information encryption devices.","PeriodicalId":236752,"journal":{"name":"Security of Infocommunication Systems and Internet of Things","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125394787","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Reading of Sensor Signals with Automatic Selection of Sampling Frequency","authors":"S. Balovsyak, Vitaly Lacusta, K. Odaiska","doi":"10.31861/sisiot2023.1.01010","DOIUrl":"https://doi.org/10.31861/sisiot2023.1.01010","url":null,"abstract":"The correct selection of sampling frequency when reading signals from sensors ensures high quality of digitized data and saves memory when storing such data. The complexity of automatic selection of the sampling frequency is explained by the fact that this frequency depends on the frequencies of the useful signal, which are not always known. Therefore, in the work the computer system for reading signals from temperature, humidity, and lighting sensors with automatic selection of the sampling frequency based on the Fourier spectrum analysis of the signals was developed. Signals from digital sensors (DHT22) are transmitted directly to the Raspberry Pi3 microcomputer. Signals from analog sensors (LM335M, light sensor) are fed to the Arduino Uno device. An algorithm for the analysis of Fourier spectra of one-dimensional signals has been developed, which is designed to determine the optimal sampling frequency and decimation coefficient of signals read from sensors. Based on the initial signals, their Fourier spectra are calculated, and by analyzing the spectra, the maximum frequency of the useful signal and the optimal sampling frequency are determined. Specified sampling frequency according to the sampling theorem is calculated as a double value of the maximum frequency of the useful signal. Decimation (thinning) of the signal is performed with a coefficient determined by the ratio of the initial and specified sampling frequencies. To assess the quality of the signal after decimation, the decimated values were interpolated by splines. The root mean square error of interpolation was calculated. Experimental testing of the developed tools for reading and analyzing signals from temperature, humidity and lighting sensors was carried out. In all considered cases, the sampling frequency is determined correctly. The resulting sampling rates can be used for decimation of signals or for subsequent reading of signals from sensors.","PeriodicalId":236752,"journal":{"name":"Security of Infocommunication Systems and Internet of Things","volume":"60 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114530402","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Protecting IoТ Wearable Devices from Electromagnetic Radiation Using Radio-Opaque Fabrics","authors":"A. Semenov, M. Prytula, O. Stalchenko, O. Donskyi","doi":"10.31861/sisiot2023.1.01007","DOIUrl":"https://doi.org/10.31861/sisiot2023.1.01007","url":null,"abstract":"The number of sources of electromagnetic radiation is increasing every day. In most cases, electromagnetic radiation has a negative effect on the human body, animals, and other living beings. Electromagnetic radiation negatively affects the operation of electronic devices. Due to the electromagnetic radiation of electronic devices, information may leak from them. The negative impact of electromagnetic radiation on the human body provokes a high level of fatigue, headache, heartache, etc. The everyday use of mobile equipment, household magnetic appliances (for example, microwave ovens), and telecommunication networks puts the majority of the planet's population at risk. Otherwise, the external influence of electromagnetic fields on the various sensors used in the IoT can contribute to receiving incorrect data from the sensors. The powerful external influence of the electromagnetic field on devices that process large data sets can contribute to a failure in mathematical calculations. Thus, protection from electromagnetic fields is necessary not only for electronic devices but also for human protection. Radio-opaque fabrics are one of the modern materials for protection from electromagnetic radiation. They can be used to protect stationary objects and wearable IoT devices and to protect people. Industrial samples of foreign and Ukrainian radio-opaque fabrics were analyzed in the work. Ukrainian manufacturers continue to develop new variants of radio-opaque fabrics. The next options for radiopaque fabrics are fabrics G7, G8, and G9. The article proposed and described a method of researching the shielding properties of the fabric. Experimental studies were carried out, and the shielding coefficient was calculated in the frequency range of 50 MHz - 2 GHz for two fabrics G7 and G8. Experimental studies were carried out for two cases of the location of fabric fibers relative to the radiating antenna and field polarization. Plots of dependences of the shielding coefficient for two fabrics with different locations of fabric fibers were presented. A comparative analysis of the shielding coefficients of two fabrics was made, and relevant conclusions were presented.","PeriodicalId":236752,"journal":{"name":"Security of Infocommunication Systems and Internet of Things","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132823091","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Technology of Silicon p-i-n Photodiodes with a Reduced Number of Thermal Operations","authors":"Микола Кукурудзяк","doi":"10.31861/sisiot2023.1.01002","DOIUrl":"https://doi.org/10.31861/sisiot2023.1.01002","url":null,"abstract":"The main parameters of the p-i-n photodiodes (PD) are responsivity, dark current and capacity of responsive elements (RE). To ensure the maximum values of the specified parameters, it is necessary to use defect-free silicon with the maximum values of resistivity and life time of minor charge carriers. These characteristics of the starting material degrade during high-temperature thermal operations. Therefore, it is worth using a technology that allows you to avoid the degradation of silicon characteristics. This can be implemented by reducing the temperature of diffusion and oxidation operations, as well as by reducing the number of actual thermal operations. The samples were made according to two versions of the technology: diffusion-planar using two-stage diffusion of phosphorus from planar sources, and mesotechnology using one-stage diffusion of phosphorus using liquid PCl3 diffusant. After manufacturing, the PD parameters were compared. The use of mesotechnology with one-stage diffusion of phosphorus made it possible to reduce the number of thermal operations by two times compared to serial technology. The experimental samples had a pulse responsivity at a wavelength of 1.064 μm of 0.47-0.50 A/W, and the serial ones had a responsivity of 0.45-0.48 A/W. The difference in responsivity is caused by the difference in the life time of minor charge carriers, since in the case of the proposed technology, the degree of degradation of the life time of minor charge carriers during the manufacturing process is smaller. After selective etching, it was seen that when using a liquid diffusant, the density of dislocations on the crystal surface is much higher than when using planar sources of phosphorus. Due to the higher density of dislocations, the experimental samples had higher dark currents, but when using a low bias voltage, the difference in dark currents is insignificant. The RE capacity of the experimental samples was slightly lower than that of the serial ones. This can be explained by the difference in the resistivity of the i-region of the final crystals.","PeriodicalId":236752,"journal":{"name":"Security of Infocommunication Systems and Internet of Things","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128531590","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Андрій Верига, Руслан Леонідович Політанський, Маргарита Рождественська, Галина Іванівна Ластівка
{"title":"Analysis of Self-Similar Binary Sequences","authors":"Андрій Верига, Руслан Леонідович Політанський, Маргарита Рождественська, Галина Іванівна Ластівка","doi":"10.31861/sisiot2023.1.01003","DOIUrl":"https://doi.org/10.31861/sisiot2023.1.01003","url":null,"abstract":"Rectangular pulses are simple to form, including with the help of a modern radio element base. In the work, a calculation analysis of the base and correlation coefficient of a binary sequence with a length of eight rectangular pulses was carried out. The obtained calculations of the base of sequences were analyzed, and a conclusion was made about which of them is the most suitable for encoding information during data transmission over the radio channel. Based on the calculations of the correlation coefficient between the series of pulse sequences, it was concluded which of them could be separated in the channel. Based on the structure of the self-similar sequence of pulses, a mathematical model and an expression of the spectral density of the proposed signal are written. A new method of correlation analysis for sequences that are symmetrical was also proposed, which allowed for improved recognition of the useful signal at lower signal-to-noise ratios in the communication channel. The method is a combination of autocorrelation and cross-correlation functions. The right and left halves of the symmetrical sequence and the reference signal are compared. The ratio of the height of the main petal to the side petals in our proposed correlation function is greater than in the classical version. To obtain the greatest possible ratio of the height of the petals, it is advisable to choose symmetrical sequences that have the largest base. With the help of such sequences, it is planned to encode one bit of information, which should improve the recognition of transmitted information against the background of noise. The obtained results are planned to be used for the development of a transmitter and receiver with an improved coding method for recognizing a useful signal against a background of noise.","PeriodicalId":236752,"journal":{"name":"Security of Infocommunication Systems and Internet of Things","volume":"2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123911794","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Микола Хобзей, Михайло Апостолюк, Владислав Ткач, Дмитро Вовчук
{"title":"Ring Resonators-Based Adjustable Bandpass Filter for Microwave Application","authors":"Микола Хобзей, Михайло Апостолюк, Владислав Ткач, Дмитро Вовчук","doi":"10.31861/sisiot2023.1.01001","DOIUrl":"https://doi.org/10.31861/sisiot2023.1.01001","url":null,"abstract":"The paper presents the principle of a microwave adaptive band-pass filter based on the cascade of ring resonators. The filter is performed as a planar microstrip technology with thickness of around 1 mm to ensure compactness of the device. The ring resonators, being a part of metamaterials, can be considered as an equivalence of an oscillator and is conventionally used in the microwaves. While a quite number of the filters with predefined parameters are well-known, the adaptive filters the throughput and output characteristics of which can be adjusted depending on the input ones is the topical problematic nowadays and, at least, for the closest future. We have investigated in the paper the possibilities of adjustment the considered filter’s transmission characteristics through the ring design, distance between them, and discussed other features, which have impact. For example, it allows expanding of the filter bandwidth from 250 to 60 MHz for simultaneous change of a distance between the adjacent rings. We have suggested the approach how to do the filter time-dependent. A varactor diode inserted into the gap of the middle ring is controlled with an independent external source and can adjust the filter bandwidth from 80 up to 140 MHz for the varactor capacitance variation from 16 to 6 pF (bias voltage variation from 1 to 7 V) that covers the existing communication networks, such as mobile generations, Bluetooth, Wi-Fi, etc. and can be applied for modern smart technologies of the Internet-of-Things for a remote control. It becomes possible because different sensing elements, such as photodiodes, Hall effect sensors, photoresistors, etc., can be exploited as the aforementioned external source.","PeriodicalId":236752,"journal":{"name":"Security of Infocommunication Systems and Internet of Things","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128959086","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Олег Круліковський, Сергій Галюк, Ігор Сафронов, І.Д. Горбенко
{"title":"Ukrainian National Encryption Standards for FPGA Based Embedded Systems","authors":"Олег Круліковський, Сергій Галюк, Ігор Сафронов, І.Д. Горбенко","doi":"10.31861/sisiot2023.1.01005","DOIUrl":"https://doi.org/10.31861/sisiot2023.1.01005","url":null,"abstract":"The paper presents the hardware implementation based on FPGA of the main cryptographic transformations of the symmetric transformation algorithm of DSTU 7624:2014 and the stream cipher of DSTU 8845:2019, which are the national encryption standards of Ukraine. In the case of DSTU 7624: 2014 developed and implemented a hardware implementation for multiplication of two polynomials modulo x8+x4+x3+x2+1 in the form of a combinational circuit that allows to execute the MixColumn transformation by one cycle. SubBytes transformation is implemented based on asynchronous read-only memory. For stream cipher, DSTU 8845:2019 the nonlinear function T are implemented as subtitution byte operation in the form of precalculated cells of ROM memory. The multiplication function by α and α-1 in Galois field arithmetic GF (2 64) is realized based on ROM and combinational logic. The control of the modes of operation of the shift register with linear feedback is performed based on a FSM. Both hardware implementations of encryption standards have been verified by the authors according to the specified data in the standard, and their HDL code can be provided by the authors for further research to interested parties.","PeriodicalId":236752,"journal":{"name":"Security of Infocommunication Systems and Internet of Things","volume":"9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128632363","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Editor’s Preface","authors":"Андрій Саміла","doi":"10.31861/sisiot2023.1.01000","DOIUrl":"https://doi.org/10.31861/sisiot2023.1.01000","url":null,"abstract":"Dear readers and authors, respected scientific community! It is extremely pleasant and at the same time somewhat exciting to address you with words of gratitude and congratulations on the occasion of the publication of the first issue of the international scientific journal \"Security of Infocommunication Systems and Internet of Things\". During this year we have done a great job, starting from the first letter with an invitation to the editorial board and ending with the release of the first issue of the journal. I am confident that, by joining forces, we will be able not only to issue the next numbers just as successfully, but also to ensure the indexation of published materials in international scientometric databases.","PeriodicalId":236752,"journal":{"name":"Security of Infocommunication Systems and Internet of Things","volume":"2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125351903","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Dual Authentication Technique for RFID Access Control Systems with Increased Level of Protection","authors":"Andrii Babii, Andrii Samila","doi":"10.31861/sisiot2023.1.01011","DOIUrl":"https://doi.org/10.31861/sisiot2023.1.01011","url":null,"abstract":"Currently, there are no uniform international standards for devices and systems that use radio frequency identification technology. Using tag alone as an identifier imposes certain restrictions on the level of protection of access control systems, since the unique tag identifier can be easily copied, so two-step authentication is required. The second level of protection can be a digital password entered via the keyboard. The work presents dual authentication technique for access control to the premises. Increasing the level of protection of radio frequency identification systems is achieved by the additional use of a digital password encrypted using a symmetric block encryption algorithm and recorded on the tag. This removes any restrictions on the number of registered users in the system, because passwords and IDs are stored on tags. The laboratory model of the device is based on the NodeMCU-32S Opensource platform with an RFID module that allows connection to most fog and cloud services of the Internet of things. The development is based on the ESP32 controller, which supports the necessary set of commands and hardware for implementing the methodology, in particular, wireless standards and communication protocols, hardware-accelerated encryption. The Cayenne service from MyDevices was chosen as the cloud platform, which made it possible to configure the device using the publish-subscribe messaging protocol and develop a graphical user interface. A log on the Cayenne platform is used to keep track of users, a character display is used to display the current status and settings of the device, and a serial interface is used to debug work algorithms. The software is implemented using the Arduino C programming language.","PeriodicalId":236752,"journal":{"name":"Security of Infocommunication Systems and Internet of Things","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132943783","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
O. Polikarovskykh, Yurii Daus, D. Larin, Mariia Tkachenko
{"title":"Systematization of Cyber Threats in Maritime Transport","authors":"O. Polikarovskykh, Yurii Daus, D. Larin, Mariia Tkachenko","doi":"10.31861/sisiot2023.1.01008","DOIUrl":"https://doi.org/10.31861/sisiot2023.1.01008","url":null,"abstract":"The paper proposes a classification of cyber-attacks at the present stage of maritime transport development. A classification system for ship blocks and port infrastructure has been developed. The vulnerabilities of the global navigation satellite system are analyzed; this system is the most important subcategory of maritime vehicles and may be a target for cyber-attacks. The paper shows that the rapid spread of cybercrime occurs due to the rapid development of new technologies and their integration into ship and port infrastructures. The main elements of the maritime transport infrastructure are considered: port infrastructure and ship infrastructure. IoT and Big Data can be examples of the spread of such systems. The ship's IT infrastructure, ship's electromechanical and electronic systems, communication systems, automatic identification systems, ship information system are considered. In the port infrastructure, port security systems, port equipment systems, port communication systems are analyzed. The main types of cyber-attacks to which the ship and port parts of the industry are exposed are considered. The signs of attacks on the Internet of things systems on ships and in ports are considered. The trend towards greater system integration cannot be reversed for economic reasons. Such integration makes it possible to reduce the size of the team, build autonomous ships, work in the smart ports system, and makes it possible to save various resources (time, human, fuel and organizational). The paper considers the practical directions and challenges facing the industry in terms of improving the security of maritime transport in cyberspace.","PeriodicalId":236752,"journal":{"name":"Security of Infocommunication Systems and Internet of Things","volume":"138 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127495651","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}