Технология и конструирование в электронной аппаратуре最新文献_第2页

Surface ZnSe:Ca layers with hole conductivity 具有空穴导电性的表面ZnSe:Ca层

Технология и конструирование в электронной аппаратуре Pub Date : 1900-01-01 DOI: 10.15222/TKEA2019.3-4.31

V. Makhniy, M. M. Berezovskiy, O. V. Kinzerska, V. Melnyk

引用次数: 0

Measurement methods and mathematical model of main characteristics of waveguide-coaxial connectors 波导同轴连接器主要特性的测量方法及数学模型

Технология и конструирование в электронной аппаратуре Pub Date : 1900-01-01 DOI: 10.15222/tkea2021.5-6.16

E. M. Glushechenko

{"title":"Measurement methods and mathematical model of main characteristics of waveguide-coaxial connectors","authors":"E. M. Glushechenko","doi":"10.15222/tkea2021.5-6.16","DOIUrl":"https://doi.org/10.15222/tkea2021.5-6.16","url":null,"abstract":"Modern complex microwave radio electronic systems may use functional devices implemented on different types of transmission lines. In order to connect such devices to each other to form antenna feed system, the following three types of special connectors can be used: coaxial, waveguide, and combined microwave devices based on waveguide and coaxial segments.\u0000The main electrical characteristics of waveguide coaxial connectors (WCC) are the losses introduced by the device to the antenna feed and matching with the regular microwave path (voltage standing-wave ratio, VSWR). Standard methods and standard equipment used to measure the characteristics of coaxial or waveguide connectors cannot be applied to WCCs. \u0000This article proposes a method designed to measure the main characteristics of waveguide-coaxial connectors and presents their mathematical model (wave matrices). The proposed methods of measuring microwave characteristic are demonstrated on the example of waveguide coaxial connectors of longitudinal coaxial type.\u0000It should be noted that the proposed technique has been experimentally tested on a number of specific devices. Not only the waveguide coaxial connectors have been studied in different frequency ranges (waveguide sizes from 23×5 to 58×25 mm), but also with different coaxial channel designs (sizes 3.5/1.52; 6.0/2.6 and 7.0/3.04 mm).\u0000The proposed method provides replicable measurements results of the characteristics of waveguide coaxial connectors, which confirms its reliability.","PeriodicalId":231412,"journal":{"name":"Технология и конструирование в электронной аппаратуре","volume":"248 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124727801","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1

Visualization of vaporization events in two-phase thermosyphons operating in different orientations 在不同方向上运行的两相热虹吸管中汽化事件的可视化

Технология и конструирование в электронной аппаратуре Pub Date : 1900-01-01 DOI: 10.15222/tkea2021.5-6.46

R. Melnyk, L. Lipnitskyi, Yu. E. Nikolaenko, V. Kravets, D. Pekur

{"title":"Visualization of vaporization events in two-phase thermosyphons operating in different orientations","authors":"R. Melnyk, L. Lipnitskyi, Yu. E. Nikolaenko, V. Kravets, D. Pekur","doi":"10.15222/tkea2021.5-6.46","DOIUrl":"https://doi.org/10.15222/tkea2021.5-6.46","url":null,"abstract":"Currently, thermosyphons are used to cool such devices as power amplifiers of radio frequency systems, data center hardware, LED light sources, etc. One of the important factors affecting the efficiency of such cooling systems is the orientation of the thermosyphons in space.\u0000This paper is dedicated to research and visualization of vaporization events in two-phase thermosyphons, primarily focusing on investigating and visualizing the influence of orientation in space on vaporization. The studies were performed for100% fill ratio. Vaporization was video recorded at 240 frames per second, whereupon the obtained footage was converted into image sequence. The analysis of the obtained materials has shown that at intensive boiling for tilt angle range of 5—45º, a part of the working fluid is always outside the evaporator. When the angle is decreased, the portion of the working fluid outside the evaporator increases. Moreover, for the 5° tilt angle, the evaporator can be completely drained at certain time intervals. It is proposed that the thermal resistance at low heat flux values for smaller tilt angles can be lower than for vertical orientation because of thin liquid films. Evaporation is more effective in thin liquid films than in large volumes. This prompts the conclusion that smaller angles will allow obtaining lower thermal resistance for the same filling ratio. On the other hand, maximum heat transfer ability decreases dramatically for the angle range of 0—10º. \u0000The obtained results can be used in further studies to analyze and explane the aspects of heat transfer in two-phase thermosyphons with a short evaporator.","PeriodicalId":231412,"journal":{"name":"Технология и конструирование в электронной аппаратуре","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129668157","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Estimating purity of Cd, Zn, Pb by non-contact measurement of specific electrical resistance at liquid nitrogen temperature 液氮温度下非接触比电阻法测定Cd、Zn、Pb纯度

Технология и конструирование в электронной аппаратуре Pub Date : 1900-01-01 DOI: 10.15222/tkea2022.4-6.46

A. Kondrik, G. Kovtun, О. Shcherban, D. О. Solopikhin

{"title":"Estimating purity of Cd, Zn, Pb by non-contact measurement of specific electrical resistance at liquid nitrogen temperature","authors":"A. Kondrik, G. Kovtun, О. Shcherban, D. О. Solopikhin","doi":"10.15222/tkea2022.4-6.46","DOIUrl":"https://doi.org/10.15222/tkea2022.4-6.46","url":null,"abstract":"High-purity fusible metals Cd, Zn, Pb and archaeological archPb are used as component elements in semiconductor and low-background scintillation detectors based on CdTe, CdZnTe, CdWO4 PbWO4 , ZnWO4 required for registering ionizing radiation and searching for particles of dark matter, rare alpha and beta decays. The detection efficiency and the sensitivity of detectors significantly depend on the purity of the constituent elements of detector materials. The dependence of the resistivity of fusible metals Cd, Zn, Pb on the degree of their purity was studied using the non-destructive technique of registering the decaying vortex currents induced in cylindrical samples after dropping the external magnetic field. The aim of the work was to determine the possibility of evaluating the purity of fusible metals using a simple methodology for measuring the characteristic times of decay of vortex currents at 77 K without the use of liquid helium.\u0000The computer analysis of the recorded signals presented in the form of decaying curves allowed finding the areas where the signal can be represented as an exponent with a characteristic decay time τ and determining a formula that related τ, specific resistance ρ, and the diameter of cylindrical samples. A comparison of the ρ values of both the initial samples of cadmium, zinc, lead, and archaeological lead, and those samples after various purification procedures, allowed establishing the dependence of the resistivity on the purity of the studied materials at the temperature of liquid nitrogen ρ77. The greater the difference in the purity of the fusible metal, the more their values ρ77 were different. Thus, the authors substantiated the possibility of a qualitative assessment of the purity of metals using contactless measurement and comparison of ρ77 for samples obtained after growing and various deep purification procedures.","PeriodicalId":231412,"journal":{"name":"Технология и конструирование в электронной аппаратуре","volume":"177 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128071767","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Flexible composite scintillators based on ZnWO4 micro- and nanopowders 基于ZnWO4微粉和纳米粉的柔性复合闪烁体

Технология и конструирование в электронной аппаратуре Pub Date : 1900-01-01 DOI: 10.15222/TKEA2019.1-2.40

V. Tinková, A. Yakubovskaya, I. Tupitsyna, S. Abashin, A. Puzan, S. Tretyak

引用次数: 1

Matrix calculation of correlation characteristics based on spectral methods 基于谱法的相关特性矩阵计算

Технология и конструирование в электронной аппаратуре Pub Date : 1900-01-01 DOI: 10.15222/tkea2020.3-4.11

L. G. Laikova, T. Tereshchenko, Y. Yamnenko

引用次数: 0

Supercapacitor energy storage systems for lighting systems with combined power supply 联合供电照明系统用超级电容器储能系统

Технология и конструирование в электронной аппаратуре Pub Date : 1900-01-01 DOI: 10.15222/tkea2021.1-2.03

D. Pekur, Y. Kolomzarov, V. P. Kostilov, V. Sorokin, V. Kornaga, R. Korkishko, Yu. E. Nikolaenko

{"title":"Supercapacitor energy storage systems for lighting systems with combined power supply","authors":"D. Pekur, Y. Kolomzarov, V. P. Kostilov, V. Sorokin, V. Kornaga, R. Korkishko, Yu. E. Nikolaenko","doi":"10.15222/tkea2021.1-2.03","DOIUrl":"https://doi.org/10.15222/tkea2021.1-2.03","url":null,"abstract":"Modern continuous lighting systems use powerful high-performance LEDs as light sources and an important task is to begin using alternative renewable energy sources for their power supply (including during the day). The simplest of the renewable energy sources is photovoltaic solar energy converter. However, solar photovoltaic generation depends significantly on many factors - geographical location, time of day, state of the atmosphere, time of year and the like. In addition, photovoltaic generation depends on the weather conditions and cloudiness, which makes it unstable and prone to change drastically (by an order of magnitude) during daylight hours. Therefore, an important element of the power system based on renewable energy sources is the system of accumulation of generated energy. The method of power stabilization using supercapacitors for systems with a significant change in power generation in the electrical power system is analyzed. The paper offers design principles of the power supply systems for powerful LEDs with supercapacitor energy storage devices intended to make the use of energy from sources with variable generation more efficient. The systems with supercapacitor-based drives, which allow to ensure stable operation of the lighting system when the power supply from an alternative source is absent or reduced, provide high safety and reliability, and have a significantly longer service life than battery-based energy storage systems.","PeriodicalId":231412,"journal":{"name":"Технология и конструирование в электронной аппаратуре","volume":"44 6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125894939","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 1

Methods of controlling electrochemical energy storages: classification and application features 电化学储能控制方法:分类及应用特点

Технология и конструирование в электронной аппаратуре Pub Date : 1900-01-01 DOI: 10.15222/tkea2022.1-3.22

S. Plaksin, M. Y. Zhytnyk, R. Levchenko, S. Y. Ostapovska

{"title":"Methods of controlling electrochemical energy storages: classification and application features","authors":"S. Plaksin, M. Y. Zhytnyk, R. Levchenko, S. Y. Ostapovska","doi":"10.15222/tkea2022.1-3.22","DOIUrl":"https://doi.org/10.15222/tkea2022.1-3.22","url":null,"abstract":"Energy storages are the most important integral elements of both autonomous energy system based on renewable energy sources and vehicles of various purposes, where they are the main power source. Therefore, the issue of controlling their operation modes is an important one, and choosing the control methods is a relevant problem. The main operation modes of energy storages which require controlling are the work mode when the stored energy is consumed and the charging mode when the used energy is replenished. The example of on-vehicle energy storage is used to analyze basic operation modes and their particular aspects. Dynamic modes with unpredictable energy consumption caused by uncontrollable undercharging and overcharging are typical. The analysis allowed drawing the conclusion that, when controlling operation modes, it is necessary to consider the energy modes of accumulators, which reflect its efficiency most fully and objectively. The analysis of existing control methods showed that their common disadvantage is that they use such parameters as voltage and operating current to control and manage the storage modes. The fact is that due to the transient nature of electrochemical processes during the operation of the storage in dynamic modes, the values of these parameters do not correspond to the current energy state of the storage. This study aims to increase the performance of electrochemical energy storages by efficiently choosing a method for controlling their operation modes. The authors prove and experimentally confirm that when working with electrochemical energy storage devices in dynamic modes, it is necessary to choose the methods based on the application of the active material utilization ratio, information equivalent of which is the value of the area under the depolarization curve on the storage’s response signal to the charging impulse. The use of the proposed mode allows combining the functions of controlling and managing the storage.","PeriodicalId":231412,"journal":{"name":"Технология и конструирование в электронной аппаратуре","volume":"50 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125085578","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Microstrip doubler microwave with non-traditional implementation 微带倍频微波与非传统的实现

Технология и конструирование в электронной аппаратуре Pub Date : 1900-01-01 DOI: 10.15222/tkea2019.1-2.20

E. Glushechenko

{"title":"Microstrip doubler microwave with non-traditional implementation","authors":"E. Glushechenko","doi":"10.15222/tkea2019.1-2.20","DOIUrl":"https://doi.org/10.15222/tkea2019.1-2.20","url":null,"abstract":"Frequency multipliers are used in electronic devices to generate spectrally pure sinusoidal signals in the frequency range from a few to tens of GHz. The multipliers are used to multiply the frequency of highly stable but more low-frequency devices with the subsequent extraction of the necessary harmonics from the frequency spectrum of the received microwave range. The frequencies selected after multiplication (set) have significantly higher energy, spectral and range characteristics, which allows them to be used as local oscillators and synthesizers in receiving and transmitting systems. \u0000The authors of this paper theoretically substantiate and practically demonstrate the possibility of an unconventional implementation of a microstrip multiplier of the microwave range based on a directional traveling wave filter. The proposed implementation does not require the use of active semiconductor elements. \u0000The well-known circuit and technological principles for the creation of microstrip microwave multipliers are considered in the paper. The features, problems and shortcomings arising from their implementation are analyzed. The effectiveness of using the balanced circuit for frequency multiplication is confirmed. A list of mandatory requirements and conditions necessary for the implementation of the microwave multipliers is given. It is demonstrated that the features of the microstrip travelling-wave filter are identical to the conditions and requirements for the implementation of balanced multipliers. It is shown and substantiated how an unconventional implementation of a passive microwave multiplier is possible due to the electromagnetic interaction of the input and output nodes of such a filter with an annular travelling-wave resonator. Using the example of modifying a block diagram of a directional filter into a multiplier circuit, the possibility of creating a microwave doubler is confirmed by separating a given frequency from the frequency spectrum of a traveling-wave ring resonator.","PeriodicalId":231412,"journal":{"name":"Технология и конструирование в электронной аппаратуре","volume":"24 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123802799","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Synthesising solver structure of the OpenFOAM mathematical modeling system for analysing thermal mode of LED lamps 用于分析LED灯热模式的OpenFOAM数学建模系统的求解器结构的综合

Технология и конструирование в электронной аппаратуре Pub Date : 1900-01-01 DOI: 10.15222/tkea2019.5-6.25

I. Sobianin, V. Trofimov

{"title":"Synthesising solver structure of the OpenFOAM mathematical modeling system for analysing thermal mode of LED lamps","authors":"I. Sobianin, V. Trofimov","doi":"10.15222/tkea2019.5-6.25","DOIUrl":"https://doi.org/10.15222/tkea2019.5-6.25","url":null,"abstract":"Today LED lamps are used more and more widely in various fields of human activity. The operation of LEDs substantially depends on the thermal dissipation power and temperature. In this regard, one of the mandatory stages in the process of creating such lamps is the analysis of their thermal mode, which is necessary for the development of a heat sink. \u0000In order to analyze the thermal mode and design the heat sink for powerful LED lamps, the authors synthesized the structure of the problem solver. The new structure was based on the structure of the basic laplacianFoam solver and the application of the swak4foam library functions, which is a part of the OpenFOAM computational fluid dynamics toolbox. The results of the thermal mode simulation of the LED thermal model (a plate with a rectangular heat source) obtained using a modified solver were compared with those obtained by the proprietary solver of the CAD/CAE SolidWorks system and those obtained by analytical computation. The data adequacy of the modified solver was estimated and its practical application verified. \u0000The thermal mode of the Samsung LC009D LED, which is placed on the flat-plate finned heat sink, was analyzed. The Kaufer 5204 glue ability to be used in such design with natural convection cooling of the heat sink was tested. The glue thickness was 0.1 mm and its thermal conductivity was 1,5 W/(m•К). The heat sink’s heat transfer coefficient was 10 W/(м2•К). The paper presents corresponding temperature distributions and shows that the new technique can be used for solving problems that arise when designing LED lamps","PeriodicalId":231412,"journal":{"name":"Технология и конструирование в электронной аппаратуре","volume":"18 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127793426","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0