{"title":"Adaptive Energy Management System for Smart Hybrid Microgrids","authors":"B. Alhasnawi, Basil H. Jasim","doi":"10.37917/ijeee.sceeer.3rd.11","DOIUrl":"https://doi.org/10.37917/ijeee.sceeer.3rd.11","url":null,"abstract":"The energy management will play an important role in the future smart grid by managing loads in an intelligent way. Energy management programs, realized via House Energy Management systems (HEMS) for smart cities, provide many benefits; consumers enjoy electricity price savings, and utility operates at reduced peak demand. This paper proposed an adaptive energy management system for islanded mode and grid-connected mode. In this paper, a hybrid system that includes distribution electric grid, photovoltaics, and batteries are employed as energy sources in the residential of the consumer in order to meet the demand. The proposed system permits coordinated operation of distributed energy resources to concede necessary active power and additional service whenever required. This paper uses home energy management system which switches between the distributed energy and the grid power sources. The home energy management system incorporates controllers for maximum power point tracking, battery charge and discharge and inverter for effective control between different sources depending upon load requirement and availability of sources at maximum powerpoint. Also, in this paper, the Maximum Power Point Tracking (MPPT) technique is applied to the photovoltaic station to extract the maximum power from hybrid power system during variation of the environmental conditions. The operation strategy of energy storage systems is proposed to solve the power changes from photovoltaics and houses loads fluctuations locally, instead of reflecting those disturbances to the utility grid. Furthermore, the energy storage systems energy management scheme will help to achieve the peak reduction of the houses daily electrical load demand. The simulation results have verified the effectiveness and feasibility of the introduced strategy and the capability of the proposed controller for a hybrid microgrid operating in different modes.","PeriodicalId":224765,"journal":{"name":"3D SCEEER Conference","volume":"221 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116012231","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Robotic Glove for Rehabilitation Purpose: Review","authors":"Y. Ahmed, A. Al-Neami, Saleem Lateef","doi":"10.37917/ijeee.sceeer.3rd.12","DOIUrl":"https://doi.org/10.37917/ijeee.sceeer.3rd.12","url":null,"abstract":"Rehabilitation robots have become one of the main technical instruments that Treat disorder patients in the biomedical engineering field. The robotic glove for the rehabilitation is basically made of specialized materials which can be designed to help the post-stroke patients. In this paper, a review of the different types of robotic glove for Rehabilitation have been discussed and summarized. This study reviews a different mechanical system of robotic gloves in previous years. The selected studies have been classified into four types according to the Mechanical Design: The first type is a tendon-driven robotic glove. The second type of robotic glove works with a soft actuator as a pneumatic which is operated by air pressure that passes through a plastic pipe, pressure valves, and air compressor. The third type is the exoskeleton robotic gloves this type consists of a wearable mechanical design that can used a finger-based sensor to measure grip strength or is used in interactive video applications. And the fourth type is the robotic glove with a liner actuator this type consists of a tape placed on the fingers and connected to linear actuators to open and close the fingers during the rehabilitation process.","PeriodicalId":224765,"journal":{"name":"3D SCEEER Conference","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131452231","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Design of a Wide Dual-Band Coplanar Probe Feed Antenna for WLANs Applications","authors":"Nabil E. Abdulhussein, A. Abdullah","doi":"10.37917/ijeee.sceeer.3rd.2","DOIUrl":"https://doi.org/10.37917/ijeee.sceeer.3rd.2","url":null,"abstract":"This paper presents a new design to obtain wide dual-band operation from a coplanar probe feed antenna loaded with two shorted walls. The lower band of proposed antenna has a 10 dB bandwidth of 611 MHz (24.18%) around the center frequency 2527MHz, and the upper band has a bandwidth of 1255 MHz (27.88%) around the center frequency 4501MHz. The obtained bandwidths cover WLANs operations on all bands. The bandwidth of the first operating frequency covers ISM band (2400-2483.5) MHz, which is required by IEEE 802.11b, g and Bluetooth standards, and the bandwidth of the second operating frequency covers U-NII1 (5150-5350) MHz band, which is required by IEEE 802.11a and HiperLAN2 standards, and also covers U-NII2 (5470-5725) MHz and U-NII3/ISM (5725-5825) MHz bands, which are required by IEEE 802.11a standard. A three dimensional finite-difference time-domain (3-D FDTD) method is employed to analyze the proposed structure and find its performance. The simulated results are compared with the experimental results.","PeriodicalId":224765,"journal":{"name":"3D SCEEER Conference","volume":"7 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134260977","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Enhancing Reading Advancement Using Eye Gaze Tracking","authors":"S. Ahmed, Mustafa S. Fadhil, S. Abdulateef","doi":"10.37917/ijeee.sceeer.3rd.9","DOIUrl":"https://doi.org/10.37917/ijeee.sceeer.3rd.9","url":null,"abstract":"This research aims to understand the enhancing reading advancement using eye gaze tracking in regards to pull the increase of time interacting with such devices along. In order to realize that, user should have a good understanding of the reading process and of the eye gaze tracking systems; as well as a good understanding of the issues existing while using eye gaze tracking system for reading process. Some issues are very common, so our proposed implementation algorithm compensate these issues. To obtain the best results possible, two mains algorithm have been implemented: the baseline algorithm and the algorithm to smooth the data. The tracking error rate is calculated based on changing points and missed changing points. In [21], a previous implementation on the same data was done and the final tracking error rate value was of 126%. The tracking error rate value seems to be abnormally high but this value is actually useful as described in [21]. For this system, all the algorithms used give a final tracking error rate value of 114.6%. Three main origins of the accuracy of the eye gaze reading were normal fixation, regression, skip fixation; and accuracies are displayed by the tracking rate value obtained. The three main sources of errors are the calibration drift, the quality of the setup and the physical characteristics of the eyes. For the tests, the graphical interface uses characters with an average height of 24 pixels for the text. By considering that the subject was approximately at 60 centimeters of the tracker. The character on the screen represents an angle of ±0.88◦; which is just above the threshold of ±0.5◦ imposed by the physical characteristics of the eyeball for the advancement of reading using eye gaze tracking.","PeriodicalId":224765,"journal":{"name":"3D SCEEER Conference","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121752529","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Performance of Non-Orthogonal Multiple Access (NOMA) with Successive Interference Cancellation (SIC)","authors":"Ali K. Marzook, H. Mohammed, Hisham Roomi","doi":"10.37917/ijeee.sceeer.3rd.21","DOIUrl":"https://doi.org/10.37917/ijeee.sceeer.3rd.21","url":null,"abstract":"Non-Orthogonal Multiple Access (NOMA) has been promised for fifth generation (5G) cellular wireless network that can serve multiple users at same radio resources time, frequency, and code domains with different power levels. In this paper, we present a new simulation compression between a random location of multiple users for Non-Orthogonal Multiple Access (NOMA) and Orthogonal Multiple Access (OMA) that depend on Successive Interference Cancellation (SIC) and generalized the suggested joint user pairing for NOMA and beyond cellular networks. Cell throughput and Energy Efficiency (EE) are gained are developed for all active NOMA user in suggested model. Simulation results clarify the cell throughput for NOMA gained 7 Mpbs over OMA system in two different scenarios deployed users (3 and 4). We gain an attains Energy Efficiency (EE) among the weak power users and the stronger power users.","PeriodicalId":224765,"journal":{"name":"3D SCEEER Conference","volume":"139 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114424696","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Synchronization and tracking control of a novel 3 dimensional chaotic system","authors":"Basil H. Jasim, M. Rashid, K. Omran","doi":"10.37917/ijeee.sceeer.3rd.14","DOIUrl":"https://doi.org/10.37917/ijeee.sceeer.3rd.14","url":null,"abstract":"In this article, a novel three dimensional chaotic systems is presented. An extensive analysis including Lyapunov exponents, dissipation, symmetry, rest points with their properties is introduced. An adaptive tracking control system for the proposed chaos system has been designed. Also, synchronization system for two identical systems has been designed. The simulation results showed the effectiveness of the designed tracking and synchronization control systems.","PeriodicalId":224765,"journal":{"name":"3D SCEEER Conference","volume":"6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124739424","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Enhancement the Sensitivity of waveguide Coated ZnO thin films: Role of Plasma Irradiation","authors":"M. H. Younus, M. Ahmed, G. G. Ali","doi":"10.37917/ijeee.sceeer.3rd.13","DOIUrl":"https://doi.org/10.37917/ijeee.sceeer.3rd.13","url":null,"abstract":"In this study, Dielectric Barrier Discharge plasma irradiation (DBD) is applied to treatment and improve the properties of the ZnO thin film deposited on the glass substrate as a sensor for glucose detection. The ZnO is prepared via a sol-gel method in this work. ZnO is irradiated by the DBD high voltage plasma to improve of its sensitivity. The optical properties, roughness and surface morphology of the waveguide coated ZnO thin films before and after DBD plasma irradiation are studied in this work. The results showed a significant improvement in the performance of the sensor in the detection of concentrations of glucose solution after plasma irradiation. Where the largest value in sensitivity was equal to 62.7 when the distance between electrodes was 5 cm compared to the sensitivity before irradiation, which was equal to 92. The high response showed in results demonstrating that the fabricated waveguide coated ZnO after plasma irradiation has the excellent potential application as a sensor to detect small concentration of glucose solution.","PeriodicalId":224765,"journal":{"name":"3D SCEEER Conference","volume":"27 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130069040","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"WSNs and IoT Their Challenges and applications for Healthcare and Agriculture: A Survey","authors":"Mohammed Saleh","doi":"10.37917/ijeee.sceeer.3rd.6","DOIUrl":"https://doi.org/10.37917/ijeee.sceeer.3rd.6","url":null,"abstract":"Nowadays, the Wireless Sensor Network (WSN) has materialized its working areas, including environmental engineering, agriculture sector, industrial, business applications, military, intelligent buildings, etc. Sensor networks emerge as an attractive technology with great promise for the future. Indeed, issues remain to be resolved in the areas of coverage and deployment, scalability, service quality, size, energy consumption and security. The purpose of this paper is to present the integration of WSNs for IoT networks with the intention of exchanging information, applying security and configuration. These aspects are the challenges of network construction in which authentication, confidentiality, availability, integrity, network development. This review sheds some light on the potential integration challenges imposed by the integration of WSNs for IoT, which are reflected in the difference in traffic features.","PeriodicalId":224765,"journal":{"name":"3D SCEEER Conference","volume":"59 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121665930","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Control Strategy of Reactive Power Sharing in an Islanded Microgrids","authors":"Ali K. Almousawi, A. Aldair","doi":"10.37917/ijeee.sceeer.3rd.16","DOIUrl":"https://doi.org/10.37917/ijeee.sceeer.3rd.16","url":null,"abstract":"Precise power sharing considered is necessary for the effective operation of an Autonomous microgrid with droop controller especially when the total loads change periodically. In this paper, reactive power sharing control strategy that employs central controller is proposed to enhance the accuracy of fundamental reactive power sharing in an islanded microgrid. Microgrid central controller is used as external loop requiring communications to facilitate the tuning of the output voltage of the inverter to achieve equal reactive power sharing dependent on reactive power load to control when the mismatch in voltage drops through the feeders. Even if central controller is disrupted the control strategy will still operate with conventional droop control method. additionally, based on the proposed strategy the reactive power sharing accuracy is immune to the time delay in the central controller. The developed of the proposed strategy are validated using simulation with detailed switching models in PSCAD/EMTDC.","PeriodicalId":224765,"journal":{"name":"3D SCEEER Conference","volume":"84 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125344205","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"The Design and Implementation of a Single-Actuator Soft Robot Arm for Lower Back Pain Reduction","authors":"A. Al-Ibadi","doi":"10.37917/ijeee.sceeer.3rd.4","DOIUrl":"https://doi.org/10.37917/ijeee.sceeer.3rd.4","url":null,"abstract":"This paper presents a simple and fast design and implementation for a soft robot arm. The proposed continuum arm has been built by a single self-bending contraction actuator (SBCA) with two-fingers soft gripper. Because of the valuable advantages of the pneumatic artificial muscle (PAM), this continuum arm provides a high degree of safety to individuals. The proposed soft robot arm has a bending behaviour of more 180° at 3.5 kg, while, its weight is 0.7 kg. Moreover, it is designed to assist the people by reducing the number of backbends and that leads to a decrease in the possibility of lower back pain.","PeriodicalId":224765,"journal":{"name":"3D SCEEER Conference","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122669772","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}