发布求助
文献互助 智能选刊 最新文献

The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science最新文献

筛选
英文 中文
Research on Obtaining Sintered Materials From 410 Stainless Steel Powder 从410不锈钢粉中获得烧结材料的研究
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science Pub Date : 2023-06-15 DOI: 10.35219/mms.2023.2.01
Simona BOICIUC
{"title":"Research on Obtaining Sintered Materials From 410 Stainless Steel Powder","authors":"Simona BOICIUC","doi":"10.35219/mms.2023.2.01","DOIUrl":"https://doi.org/10.35219/mms.2023.2.01","url":null,"abstract":"Ferritic steels are used in applications that require good thermal conductivity and/or durability in operation involving heat cycles. They are easy to process due to their high ductility and have magnetic properties.
 The paper presents a series of experimental research on the manufacture of sintered products obtained from 410 stainless steel powder and their characterization from the microstructural and wear resistance point of view.
","PeriodicalId":22358,"journal":{"name":"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science","volume":"33 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135860798","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Additive Manufacturing Through 3D Printing FDM-Fused Deposit Modeling of Lubrication Ring 增材制造技术在润滑环3D打印中的应用
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science Pub Date : 2023-06-15 DOI: 10.35219/mms.2023.2.06
Sorin Alexandru FICĂ, Andrei DIMITRESCU, Claudiu BABIȘ
{"title":"Additive Manufacturing Through 3D Printing FDM-Fused Deposit Modeling of Lubrication Ring","authors":"Sorin Alexandru FICĂ, Andrei DIMITRESCU, Claudiu BABIȘ","doi":"10.35219/mms.2023.2.06","DOIUrl":"https://doi.org/10.35219/mms.2023.2.06","url":null,"abstract":"It presents an element of absolute novelty for industrial scientific research in Romania, the fact that the housing of the washing head and other landmarks of the washing head from the FA100 water well drilling installations. FA125, FH150 and FG40 were made by additive manufacturing by 3D printing with PETG and ABS+ filament.
","PeriodicalId":22358,"journal":{"name":"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135860537","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Additive Manufacturing by 3D Printing of the Landmark Gas Reduction R2-M60x2, Using ABS+ Filament 里程碑式气体还原R2-M60x2的3D打印增材制造，使用ABS+长丝
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science Pub Date : 2023-06-15 DOI: 10.35219/mms.2023.2.07
Sorin Alexandru FICĂ, Claudiu BABIȘ, Andrei DIMITRESCU
{"title":"Additive Manufacturing by 3D Printing of the Landmark Gas Reduction R2-M60x2, Using ABS+ Filament","authors":"Sorin Alexandru FICĂ, Claudiu BABIȘ, Andrei DIMITRESCU","doi":"10.35219/mms.2023.2.07","DOIUrl":"https://doi.org/10.35219/mms.2023.2.07","url":null,"abstract":"This work deals with the additive manufacturing by 3D printing of the Gas Reduction R2-M60x2 landmark which is part of the Gas Reduction R2-Hose DN 2 in subassembly. This sub-assembly is a component part of the washing head of the light water well drilling installations FA 100, FA 125, FH 150 and FG 40. The generic name of the washing head will be FA 100. We use 3D printing technology because, on the one hand, it is technically possible to make the part and on the other hand, for economic reasons. It is approximately ten times cheaper to make the part through 3D printing than through conventional technologies.
","PeriodicalId":22358,"journal":{"name":"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science","volume":"33 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135860535","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Research on the Rice Bran Oil – Flammability Tests on a High Temperature Surface 米糠油高温表面可燃性试验研究
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science Pub Date : 2023-06-15 DOI: 10.35219/mms.2023.2.02
Liviu Cătălin ȘOLEA, Romică CREȚU
{"title":"Research on the Rice Bran Oil – Flammability Tests on a High Temperature Surface","authors":"Liviu Cătălin ȘOLEA, Romică CREȚU","doi":"10.35219/mms.2023.2.02","DOIUrl":"https://doi.org/10.35219/mms.2023.2.02","url":null,"abstract":"In this work rice oil was tested when it is dripped onto a high temperature surface. The tests conducted determined the lowest temperature at which rice oil ignited and the highest temperature at which rice oil did not ignite in three tests conducted at the same temperature. The results of this study show that the values of the evaluated temperatures are of major importance regarding the use of rice oil as an eco-friendly lubricant. Thus, the highest temperature at which rice oil did not ignites is 465 °C, while the lowest temperature at which rice oil ignited is 470 °C. Moreover, at the end of the 8 tests performed, part of the oils collected in the tray of the installations used in the present study were subjected to spectrophotometric tests. Based on the obtained data, the transmittance spectra were plotted and the trichromatic components and coordinates were calculated, as well as the colour differences of the tested oils.
","PeriodicalId":22358,"journal":{"name":"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science","volume":"55 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135860538","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Advanced Methods to Characterize the Structural Materials of Religious Buildings Construction 宗教建筑结构材料表征的先进方法
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science Pub Date : 2023-06-15 DOI: 10.35219/mms.2023.2.03
Kaoutar CHOUGRANI, Adriana Gabriela SCHIOPU, Mimoun CHOURAK
{"title":"Advanced Methods to Characterize the Structural Materials of Religious Buildings Construction","authors":"Kaoutar CHOUGRANI, Adriana Gabriela SCHIOPU, Mimoun CHOURAK","doi":"10.35219/mms.2023.2.03","DOIUrl":"https://doi.org/10.35219/mms.2023.2.03","url":null,"abstract":"The paper aims to present a bibliographic study of works on the characterization of materials, for mosques and historical minarets, using destructive methods (uniaxial compression, tension direct and indirect), and non-destructive testing (Schmidt rebound hardness, ultrasonic pulse velocity (UPV), scanning electron microscope (SEM) and X-ray diffraction (XRD) and their usefulness in the field of protection built cultural heritage. These religious buildings usually are constructed of brick masonry, stone, or/and reinforced cement concrete. Further, the form and amount of a structural defect is a function of the environment to which the structure is subjected. The different techniques used, for various construction materials, have determined the following parameters: the surface hardness, pulse velocity, structural composition, compressive strength, tensile strength and chemical composition. In general, these parameters govern the behavior under the different actions, and contribute to the strengthening and protection of the structure.
","PeriodicalId":22358,"journal":{"name":"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science","volume":"9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135860536","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Additive Manufacturing Through 3D Printing of the Mark HOS Pipe DN 50, Using ABS+ Filament 使用ABS+长丝的Mark HOS管dn50的3D打印增材制造
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science Pub Date : 2023-06-15 DOI: 10.35219/mms.2023.2.09
Sorin Alexandru FICĂ, Claudiu BABIȘ, Andrei DIMITRESCU
{"title":"Additive Manufacturing Through 3D Printing of the Mark HOS Pipe DN 50, Using ABS+ Filament","authors":"Sorin Alexandru FICĂ, Claudiu BABIȘ, Andrei DIMITRESCU","doi":"10.35219/mms.2023.2.09","DOIUrl":"https://doi.org/10.35219/mms.2023.2.09","url":null,"abstract":"This paper deals with the additive manufacturing by 3D printing of the Hose Pipe DN 50 landmark which is part of the Gas Reduction R2-Hose DN 2 in subassembly. This sub-assembly is a component part of the washing head of the light water well drilling installations FA 100, FA 125, FH 150 and FG 40. The generic name of the washing head will be FA 100. We use 3D printing technology because, on the one hand, it is technically possible to make the part and on the other hand, for economic reasons. It is approximately ten times cheaper to make the part through 3D printing than through conventional technologies.
","PeriodicalId":22358,"journal":{"name":"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science","volume":"33 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135860789","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Additive Manufacturing Through 3D Printing of the Landmark Nut M60x2, Using ABS+ Filament 通过3D打印里程碑螺母M60x2的增材制造，使用ABS+长丝
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science Pub Date : 2023-06-15 DOI: 10.35219/mms.2023.2.08
Sorin Alexandru FICĂ, Claudiu BABIȘ, Andrei DIMITRESCU
{"title":"Additive Manufacturing Through 3D Printing of the Landmark Nut M60x2, Using ABS+ Filament","authors":"Sorin Alexandru FICĂ, Claudiu BABIȘ, Andrei DIMITRESCU","doi":"10.35219/mms.2023.2.08","DOIUrl":"https://doi.org/10.35219/mms.2023.2.08","url":null,"abstract":"This paper deals with the additive manufacturing by 3D printing of the Dutch Nut-M60x2 landmark which is part of the subassembly Gas Reducer R2-Hose DN 2 in. This subassembly is a component part of the washing head of the light water well drilling installations FA 100, FA 125, FH 150 and FG 40. The generic name of the washing head will be FA 100.We use 3D printing technology because, on the one hand, it is technically possible to make the part and on the other hand, for economic reasons. It is approximately ten times cheaper to make the part through 3D printing than through conventional technologies.","PeriodicalId":22358,"journal":{"name":"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science","volume":"43 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135860785","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Construction of the FH 150 Hydro-Geological Drilling Facility with Additive Manufactured Markers Through 3D Printing fh150水文地质钻井设备的3D打印施工
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science Pub Date : 2023-06-15 DOI: 10.35219/mms.2023.2.04
Sorin Alexandru FICĂ, Andrei DIMITRESCU, Claudiu BABIȘ
{"title":"Construction of the FH 150 Hydro-Geological Drilling Facility with Additive Manufactured Markers Through 3D Printing","authors":"Sorin Alexandru FICĂ, Andrei DIMITRESCU, Claudiu BABIȘ","doi":"10.35219/mms.2023.2.04","DOIUrl":"https://doi.org/10.35219/mms.2023.2.04","url":null,"abstract":"The washing head is the most important sub-assembly in a water well drilling installation, and ensures the operation of the installation on the principle of \"hydraulic rotary drilling with direct circulation of drilling fluid\", whereby, inside the rotating drill rod assembly is injected, through the washhead, drilling fluid from the discharge of the drilling mud pump, which is fed from a pit (pit) dug below ground level.
","PeriodicalId":22358,"journal":{"name":"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science","volume":"44 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135860788","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Additive Manufacturing Through 3D Printing FDM-Fused Deposit Modeling of Top Cover 增材制造通过3D打印fdm熔覆顶盖建模
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science Pub Date : 2023-06-15 DOI: 10.35219/mms.2023.2.05
Sorin Alexandru FICĂ, Andrei DIMITRESCU, Claudiu BABIȘ
{"title":"Additive Manufacturing Through 3D Printing FDM-Fused Deposit Modeling of Top Cover","authors":"Sorin Alexandru FICĂ, Andrei DIMITRESCU, Claudiu BABIȘ","doi":"10.35219/mms.2023.2.05","DOIUrl":"https://doi.org/10.35219/mms.2023.2.05","url":null,"abstract":"In this work, it is proposed to make by additive manufacturing through 3D printing with FDM technology FDM (Fused Deposition Modeling - Modeling by Depositing Fusible Filament) some landmarks of the washing head which is common to the light water well drilling rigs FA100, FA125, FH150 and FG40.
 A washing head like the FA100 washing head, which has the casing and the drilling fluid supply fittings, 3D printed from PETG and ABS+ filament, has never been made in Romania.
 The main advantages of using this manufacturing technology are that by purchasing such equipment, a large number of different landmarks can be made and the final price of the landmark.
","PeriodicalId":22358,"journal":{"name":"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science","volume":"29 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"135859322","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Corrosion Inhibition Efficacy of Hybrid Organic Extracts from Prosopisafricana and Citrulluslanatus on Mild Steel in Acidic Medium 非洲藜和瓜蒌有机杂化提取物在酸性介质中对低碳钢的缓蚀效果
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science Pub Date : 2023-03-15 DOI: 10.35219/mms.2023.1.04
Y. L. Shuaib-Babata, Israel Victor Ayinde, Yusuf Olanrewaju Busari, Mubarak Oloduowo Ameen, R. A. Yahya, I. O. Ambali, Ishaaq Na’allah Aremu, S. O. Abdulraman, Kabiru Suleiman Ajao, Abdulateef Alabi Garuba
{"title":"Corrosion Inhibition Efficacy of Hybrid Organic Extracts from Prosopisafricana and Citrulluslanatus on Mild Steel in Acidic Medium","authors":"Y. L. Shuaib-Babata, Israel Victor Ayinde, Yusuf Olanrewaju Busari, Mubarak Oloduowo Ameen, R. A. Yahya, I. O. Ambali, Ishaaq Na’allah Aremu, S. O. Abdulraman, Kabiru Suleiman Ajao, Abdulateef Alabi Garuba","doi":"10.35219/mms.2023.1.04","DOIUrl":"https://doi.org/10.35219/mms.2023.1.04","url":null,"abstract":"Each of Prosopis Africana pod extract (PAPE) and Citrulluslanatus (WMPE) performed quite well as green inhibitors in the electrochemical corrosion in acidic solution at ambient temperature in previous research. However, the hybridization of these compounds was varied with the concentration ratio in this study to optimize the efficiency of the green inhibitor in a hydrochloric acid medium using mild steel. The extraction process of the inhibitor samples was carried out with the Soxhlet apparatus using n-hexane as the solvent. Furthermore, the potential inhibition efficiency was monitored using various corrosion measurement techniques at room temperature. The inhibitive response of the extracts could be attributed  to the adsorption of the extracts’ components on mild steel surface by physisorption mechanism according to the Langmuir adsorption isotherm model. The results revealed that inhibition efficiency (IE%) depends on the concentration of the extracts. The peak IE% values were obtained with a hybrid ratio of 3:1 (PAPE: WMPE) for gravimetric technique. The Tafel polarization and gasometrical measurement technique is 96.7%, 98.5% and 83.1% respectively at the concentration of 1.0 g/L, which are above the peak IE% for PAPE (93.7%, 80.96% and 77.8%) and WMPE (92.7%, 80.5% and 75.6%).","PeriodicalId":22358,"journal":{"name":"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science","volume":"35 1","pages":""},"PeriodicalIF":0.0,"publicationDate":"2023-03-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"83571562","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
下一页 尾页
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整，为了账户安全，请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们：info@booksci.cn Book学术提供免费学术资源搜索服务，方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号：481959085
Book学术官方微信