P. C. Fletcher, Y. Xu, P. Gopinath, J. Williams, B. Alphenaar, R. D. Bradshaw, R. Keynton
{"title":"Piezoresistive Geometry for Maximizing Microcantilever Array Sensitivity","authors":"P. C. Fletcher, Y. Xu, P. Gopinath, J. Williams, B. Alphenaar, R. D. Bradshaw, R. Keynton","doi":"10.1109/ICSENS.2008.4716751","DOIUrl":"https://doi.org/10.1109/ICSENS.2008.4716751","url":null,"abstract":"Previous work showed the capability of T-shaped piezoresistive cantilevers to detect gas composition using a nonreaction-based method - viscous damping [1]. However, this geometry yielded only small changes in resistance. Computational studies [2] indicate that optimizing the geometry of the base piezoresistor increases device sensitivity up to 700 times. This work reports on the development and testing of these novel asymmetric piezoresistive cantilevers. The first mode of resonance ranged from 40 kHz to 63 kHz, depending on piezoresistor geometry and beam length. Initial testing on the redesigned piezoresistive microcantilevers indicates that the new designs are 15-200 times more sensitive than the best symmetric design previously reported by our group.","PeriodicalId":219367,"journal":{"name":"2008 17th Biennial University/Government/Industry Micro/Nano Symposium","volume":"5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-12-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116818146","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
R. S. Wiederkehr, M. Salvadori, F. Fernandes, M. Cattani
{"title":"Numerical Study of a Piezoelectric Microvalve Using Continuum Methods","authors":"R. S. Wiederkehr, M. Salvadori, F. Fernandes, M. Cattani","doi":"10.1109/UGIM.2008.74","DOIUrl":"https://doi.org/10.1109/UGIM.2008.74","url":null,"abstract":"Gas flow through a conical micronozzle integrated with a piezoelectric actuator has been numerically studied using continuum methods. Experimental data of air flow through a converging-diverging nozzle of throat diameter 245 mum with and without actuator at its outlet side were used for reference. The inlet pressure was kept constant at 266 Pa in all measurements. The actuator at the nozzle outlet was fabricated from poli(vinylidene fluoride) (PVDF), a piezoelectric polymer, and has a 3 mm x 6 mm rectangular shape. A voltage of +300 V DC was used to open the device, and -200 V to close it. The micronozzle with actuator is a microvalve, since the gas flow rate can be controlled by the actuator. We used Ansys/CFX software to solve the Navier Stokes equations for this valve system. The Mach number was obtained for both cases, micronozzle with and without actuator at the outlet.","PeriodicalId":219367,"journal":{"name":"2008 17th Biennial University/Government/Industry Micro/Nano Symposium","volume":"87 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117121939","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
S. Masturzo, J. Boyd, J. Yarrison-Rice, H. Jackson
{"title":"Fabrication and Preliminary Characterization of a Parabolic Coupler for Photonic Crystal Waveguides","authors":"S. Masturzo, J. Boyd, J. Yarrison-Rice, H. Jackson","doi":"10.1109/UGIM.2008.39","DOIUrl":"https://doi.org/10.1109/UGIM.2008.39","url":null,"abstract":"Planar solid immersion mirrors have been implemented to inject grating-coupled infrared light from 30 mum wide rectangular channel waveguides into ~1.6 mum wide photonic crystal waveguides with high efficiency.","PeriodicalId":219367,"journal":{"name":"2008 17th Biennial University/Government/Industry Micro/Nano Symposium","volume":"10 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127490931","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Compact Models of the Quantized Sub-Band Energy Levels for MOSFET Device Application","authors":"H. Abebe, E. Cumberbatch, H. Morris, V. Tyree","doi":"10.1109/UGIM.2008.22","DOIUrl":"https://doi.org/10.1109/UGIM.2008.22","url":null,"abstract":"The quantum confinement effect of the MOS structure at the silicon/oxide interface can be determined by solving the coupled Schrodinger and Poisson equations using a self-consistent numerical method. Computationally efficient compact models are usually determined from a triangular potential well approximation near the silicon/silicon-oxide interface. The triangular potential model is improved in [Yutao Ma, et. al. (2000)] at strong inversion by using the effective surface field. An analytical model based on the Wentzel-Kramer-Brillouin (WKB) asymptotic approximation of the coupled Schrodinger and Poisson equations is proposed in [H. Abebe, et. al. (2006)]. In this paper we compare results from the compact models of [Yutao Ma, et. al. (2000)] and [H. Abebe, et. al. (2006)] with SCHRED The results in figures 2 and 3 show that the two models give improvement over the original triangular potential well approximation [M. Stern (1972)] at strong inversion, but both show some differences in predicting the substrate doping effects on the quantum subband energy levels compared to SCHRED.","PeriodicalId":219367,"journal":{"name":"2008 17th Biennial University/Government/Industry Micro/Nano Symposium","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122180021","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"MEMS Fabrication Course for Pressure Sensors, Flow Sensors, Fluidic Channels and Micro-Pumps","authors":"R. Pearson, L. Fuller, I. Puchades","doi":"10.1109/UGIM.2008.26","DOIUrl":"https://doi.org/10.1109/UGIM.2008.26","url":null,"abstract":"This paper describes a simple, reliable; bulk micro- machined, micro-electro-mechanical system (MEMS) process flow for the fabrication of a wide variety of devices which has been implemented within the Microelectronic Engineering Department at the Rochester Institute of Technology. The fabrication and testing results for pressure sensors, flow sensors, micro-pumps, and micro- fluidic packaging in a ten week fabrication course are reported.","PeriodicalId":219367,"journal":{"name":"2008 17th Biennial University/Government/Industry Micro/Nano Symposium","volume":"212 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128471324","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
J. Aebersold, M. Martin, T. Roussel, R. Keynton, K. Walsh
{"title":"Microfabrication Process and Characteristic Testing of a MEMS-Based Preconcentrator","authors":"J. Aebersold, M. Martin, T. Roussel, R. Keynton, K. Walsh","doi":"10.1109/UGIM.2008.23","DOIUrl":"https://doi.org/10.1109/UGIM.2008.23","url":null,"abstract":"Due to terroristic activities it has become of significant importance to accurately detect vapor or trace particles of explosive materials. This task is difficult due to the limited number of particles available to be gathered for analysis. In order to combat this problem a preconcentrator has been developed to increase collection efficiency and the signal to noise ratio. Described is the fabrication process and characteristic testing prior to use with a portable ion mobility spectrometer (IMS).","PeriodicalId":219367,"journal":{"name":"2008 17th Biennial University/Government/Industry Micro/Nano Symposium","volume":"35 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129169143","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"High-Temperature Microreactors for In-Situ Nanomaterial Deposition","authors":"E. Moiseeva, C. Harnett","doi":"10.1109/UGIM.2008.69","DOIUrl":"https://doi.org/10.1109/UGIM.2008.69","url":null,"abstract":"We demonstrate the fabrication of sealed high- temperature microreactor for the integration of nanomaterials directly into microfluidic channels. In this approach, a microfluidic channel serves first as a microscopic chemical vapor deposition (CVD) system, then later as a fluid delivery system.","PeriodicalId":219367,"journal":{"name":"2008 17th Biennial University/Government/Industry Micro/Nano Symposium","volume":"2 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129998307","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Shape Memory Alloys and Their Use in MEMS Capable Deployable Sensors","authors":"D. Scoggin, C. Wilson","doi":"10.1109/UGIM.2008.70","DOIUrl":"https://doi.org/10.1109/UGIM.2008.70","url":null,"abstract":"Current MEMS capable caseless sensor deployment research at Louisiana Tech University is briefly described with a focus of the applications of nitinol. Both shape memory effect and superelastic effect nitinol fins are described with a suggestion of combining the two for a guidance system.","PeriodicalId":219367,"journal":{"name":"2008 17th Biennial University/Government/Industry Micro/Nano Symposium","volume":"38 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126576661","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Strain-Induced Three-Dimensional Microfabrication for Advanced Antenna Architectures","authors":"Y. M. Senousy, E. Moiseeva, C. Harnett","doi":"10.1109/UGIM.2008.65","DOIUrl":"https://doi.org/10.1109/UGIM.2008.65","url":null,"abstract":"Recently, techniques known as 'micro-origami' or 'strain architecture' have emerged for fabrication of out-of-plane micro-and nanostructures by relaxation of a pair of strain- mismatched thin films. Applications of such structures include optical reflectors, actuators and microcoils for antenna applications.","PeriodicalId":219367,"journal":{"name":"2008 17th Biennial University/Government/Industry Micro/Nano Symposium","volume":"62 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131233926","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Bottom Up Microsystem Construction Strategies Built Upon 3D Directed Self-Assembly of Metallic and Polymeric Nanostructures","authors":"Robert W. Cohn","doi":"10.1109/UGIM.2008.43","DOIUrl":"https://doi.org/10.1109/UGIM.2008.43","url":null,"abstract":"Two self-assembly methods, one for growing individual metal nanoneedles at selected locations on substrates, and a second for automatically assembling arrays of polymer nanofiber two-point suspended air-bridges are reviewed. Complex integrated systems are proposed that incorporate these elements, including a rare-cell cell sorter, an electrochemical disk nanoelectrode and a rather arbitrary point-to-point 3D polymer fiber interconnection system. The last system is envisioned as composed of an array of individually actuated nanoneedles that can be electrostatically positioned to permit the selective drawing of polymer nanofibers air-bridges in 3D.","PeriodicalId":219367,"journal":{"name":"2008 17th Biennial University/Government/Industry Micro/Nano Symposium","volume":"210 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2008-07-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131055482","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}