{"title":"Numerical Analysis of the Dynamic Characteristics of a Balanced Piston Type Relief Valve (1st Report, Numerical Simulation and Experimental Results)","authors":"S. Hayashi, Yuji Iizuka, T. Hayase, I. Iimura","doi":"10.5739/JFPS1970.28.232","DOIUrl":"https://doi.org/10.5739/JFPS1970.28.232","url":null,"abstract":"In this paper, the authors have derived a mathematical model describing the dynamics of a balanced piston type relief valve, which is represented by 11 ordinary differential equations and 3 difference equations depicting the dynamics of a supply and load pipeline which are assumed to be as lossless distributed parameter elements. The validity of the model has been confirmed by comparing the simulated results with experimental results. Furthermore, influences of the system parameters on the dynamic characteristics of a relief valve have been investigated by simulation of the proposed model.","PeriodicalId":219213,"journal":{"name":"Hydraulics & Pneumatics","volume":"56 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1997-03-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130549786","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"電気油圧マニピュレータの高精度制御 H∞制御による6軸油圧マニピュレータのロバスト制御","authors":"山本 敏郎, 横田 眞一, 田村 尉","doi":"10.5739/JFPS1970.28.99","DOIUrl":"https://doi.org/10.5739/JFPS1970.28.99","url":null,"abstract":"In this report, we have studied the positional precision of the end effecter regarding robustness with regards to changes in the system parameters of a 6-axis manipulator that has unstable characteristics. In particular, cooperation of the various axes becomes important for improving the positional precision, and the H-Infinity control method is applied and evaluated by an independent servo-system for each joint. With the designed the H-Infinity controller, not only the system would be made to become robust against parameter fluctuations, but also the disturbance effects would be reduced. As a result, it could be verified by an experiment in which robust, stable positional precision could always be achieved against fluctuations in the moment of inertia caused by changes in the attitude of the arm, and against nonlinear disturbances, such as axis interference, that are characteristic of multi-jointed arms.","PeriodicalId":219213,"journal":{"name":"Hydraulics & Pneumatics","volume":"26 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1997-01-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121852998","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Graphical calculation method using the smith chart for analyzing the frequency response of pneumatic transmission line systems.","authors":"Katsumasa Suzuki","doi":"10.5739/JFPS1970.28.122","DOIUrl":"https://doi.org/10.5739/JFPS1970.28.122","url":null,"abstract":"It is difficult, even for an expert to envisage the frequency response characteristics of pneumatic transmission line systems for an arbitrary terminal condition before the actual calculations are performed, because the equations are very complicated. On the other hand, the graphical method, called the Smith chart, is often used for analyzing frequency response of electric transmission lines, whose characteristics are described by a similar wave equation. Referring to this method, the author proposes a graphical method to calculate the frequency response of pneumatic transmission line systems. The method uses reflection coefficients and mapping. Computer display facilitates understanding of the calculation. The new method provides significant insight for analyzing and designing pneumatic transmission line systems. It becomes easy, even for a beginner, to understand the frequency response of pneumatic transmission line systems.","PeriodicalId":219213,"journal":{"name":"Hydraulics & Pneumatics","volume":"95 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1997-01-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123764474","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
K. Araki, Chen Jian-bo, Cheng Xing-qiao, Y. Ishino
{"title":"Development of a Motion and Force Compound Control Cylinder for Spot-Welding (1st Report, Parameter Optimization of the Force Control Cylinder)","authors":"K. Araki, Chen Jian-bo, Cheng Xing-qiao, Y. Ishino","doi":"10.5739/JFPS1970.27.941","DOIUrl":"https://doi.org/10.5739/JFPS1970.27.941","url":null,"abstract":"In the spot wedling, the electrode force is usually kept constant during a short welding time because of a too low response speed of the air cylinder and it can not satisfy the developing requirements of spot welding technology. A new motion and force compound control cylinder has been developed to control the electrode force at a high speed. It is composed of a motion control piston and force control piston on the same rod.The optimal structural parameters and operating conditions of the cylinder are analyzed in the paper. Experiments indicate that the response time of the system for a step input is improved from 0.2 [s] for the conventional cylinder to 0.010 [s] for the cylinder developed here, and the bandwidth is improved from 10 to about 100 [Hz]. It will be possible with using this cylinder to avoid spattering during spot welding and to reduce the welding defects, and increase the welding strength. It can also be applied in other fields of fast control.","PeriodicalId":219213,"journal":{"name":"Hydraulics & Pneumatics","volume":"61 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1996-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124449526","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Analysis of Flexible Hoses with Spiral Tubular Inserts for a Reduction in the Fluidborne Pressure Pulsation in an Automotive Power Steering Hydraulic System (1st Report, Experimental Considerations)","authors":"E. Kojima, T. Ichiyanagi, Yoshikazu Kimura","doi":"10.5739/JFPS1970.27.788","DOIUrl":"https://doi.org/10.5739/JFPS1970.27.788","url":null,"abstract":"This paper deals with investigations on propagation and attenuation characteristics of fluidborne pressure pulsation generated by a pump in a complete power steering hydraulic transmission circuit. Emphasis is placed on the accurate measurement of transfer matrix parameters, and hence, transmission loss of the resonator hose, a kind of hydraulic silencer, consisting of a reinforced hose and spiral tubes positioned coaxialy inside it, for the purpose of obtaining basic data for developing a satisfactory mathematical model for the attenuation characteristics in future. Experimental results show that the pulsation attenuation characteristics of resonator hose (i.e. , transmission loss) is remarkably affected by the resonance of longitudinal vibration of finite-length hose wall as well as its visco-elastic properties. It is also shown that the predicted pressure pulsations from measured transfer matrix parameters of system components, including resonator hose and measured pump source characteristics in any position in a real complete power steering hydraulic circuit, agree well with the measured results over a wide frequency range up to around 1.5 kHz in interest. These satisfactory test results will assist engineers in the modeling and design of resonator hoses, and hence, should provide a means for designing a quieter automotive power steering hydraulic system.","PeriodicalId":219213,"journal":{"name":"Hydraulics & Pneumatics","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1996-09-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115761495","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jiseong Jang, T. Kagawa, Toshinori Hujita, K. Kawashima
{"title":"Characteristic of Pressure Control System with Pneumatic Vessel and Proportional Valve.","authors":"Jiseong Jang, T. Kagawa, Toshinori Hujita, K. Kawashima","doi":"10.5739/JFPS1970.27.544","DOIUrl":"https://doi.org/10.5739/JFPS1970.27.544","url":null,"abstract":"In case of charging of or discharging from a chamber with a compressible fluid, the temperature change of fluid in chamber affects pressure change as a result of convective heat transfer within the chamber wall. Therefore, in a pressure control system using a compressible fluid, the temperature change has an effect on the control characteristics of the pressure.This study analyzed how a temperature change, owing to heat transfer with the chamber wall, can affect the control characteristics of the pressure in it with a normal chamber and isothermal chamber. An isothermal chamber is a chamber that can almost realize isothermal conditions due to the larger heat transfer area and heat transfer coefficient by filling it with steel wool. As a result, this study could confirm that a slight temperature change can affect the pressure control characteristics and dynamic characteristics of pressure response, making it better by a suppression of the temperature change in a chamber.","PeriodicalId":219213,"journal":{"name":"Hydraulics & Pneumatics","volume":"374 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1996-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121755331","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"PID形Sliding Modeによる電気・油圧サーボ系の位置制御に関する研究","authors":"錫洪 河, 萬午 廉, 謙來 趙, 珍杰 李","doi":"10.5739/JFPS1970.26.874","DOIUrl":"https://doi.org/10.5739/JFPS1970.26.874","url":null,"abstract":"Up to now, there has been a lot of researches on the sliding mode control which has insensitive characteristics to the variations of plant parameters, nonlinearities, and external disturbances. One difficulty in applying the sliding mode control is the need for knowledge on full-state vector. The use of an state observer is a natural step towards the relaxation of this condition. However, it is impossible to show the essential effect of the sliding mode because an exact plant modeling is needed. Recently, there has been a remarkable advance in microprocessors and one can construct a controller, formerly unrealizable due to hardware restrictions in the past. Therefore in this paper, the PID sliding mode controller which has only one output feedback signal is suggested by means of a microprocessor, and the performance of an electro-hydraulic servosystem compensated with this controller is verified.","PeriodicalId":219213,"journal":{"name":"Hydraulics & Pneumatics","volume":"50 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-11-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115386801","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
T. Kagawa, K. Kawashima, T. Fujita, Yutaka Tanaka, K. Sakaki
{"title":"Measurement Method for the Effective Area using an Isothermal Chamber.","authors":"T. Kagawa, K. Kawashima, T. Fujita, Yutaka Tanaka, K. Sakaki","doi":"10.5739/JFPS1970.26.76","DOIUrl":"https://doi.org/10.5739/JFPS1970.26.76","url":null,"abstract":"The flow characteristics of valves and restrictions are often represented by the effective area. The effective area is often measured using a method defined in the ISO standards. The method is to measure the flow rate and differential pressure between the tested valve. Therefore, the accuracy of the method depends to a great extent on the accuracy of the flow meter.On the other hand, a more simplified method to measure the effective area is defined in the JIS standards. This method discharges air from the chamber through the tested valve, and the effective area is measured indirectly from the pressure response of the air in th chamber. The method calculates the effective area, assuming the adiabatic conditions during discharge. Though, even in-a sudden discharge, the heat is transferred into the chamber. Therefore, this causes a measurement error.In this study, the relation between the temperature change of the air and the measurement error of the JIS method owing to the chamber volume and the length of the pipeline are examined. Then, it became clear that by stuffing the steel wool into the chamber, the transfer area and heat transfer coefficient could be made larger and an isothermal condition could almost be realized. This chamber is called an “Isothermal chamber”. The method to measure the effective area has been proposed using an isothermal chamber. The proposed method can lessen the measurement error as a result of the chamber volume and length of the pipeline compared with the JIS method.","PeriodicalId":219213,"journal":{"name":"Hydraulics & Pneumatics","volume":"37 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1995-01-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125354778","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Continuous Pressure Control by a New Intensifier Using an Oil Hammer","authors":"Katsumasa Suzuki, K. Misawa","doi":"10.5739/ISFP.1993.495","DOIUrl":"https://doi.org/10.5739/ISFP.1993.495","url":null,"abstract":"The authors proposed to actively utilize the pressure rise phenomenon of an oil hammer and a new type of hydraulic pressure intensifier using an oil hammer. Application of the intensifier to pressure control of a hydraulic cylinder has already been proposed.In this paper, the desired input signal for pressure control is timevariable. The output pressure follows the input signal and generates the waveform which changes the value continuously. The maximum output pressure is several times higher than the original pump pressure. The experiment and simulation reveal that an efficiency of about 40 % is obtained.","PeriodicalId":219213,"journal":{"name":"Hydraulics & Pneumatics","volume":"24 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1994-05-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124158328","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"直動型空気圧アクチュエータのタイム・ディレイ・コントロール","authors":"憲司 藤本, 諭 田所, 年 高森","doi":"10.5739/JFPS1970.23.412","DOIUrl":"https://doi.org/10.5739/JFPS1970.23.412","url":null,"abstract":"When PID control or optimal control is used for pneumatic servo systems, it is not always easy to get a good response under a wide range of working positions, because exact models for the pneumatic actuators cannot be obtained and because their dynamics is very nonlinear. The Time Delay Control (TDC), however, can rapidly compensate for the modeling error and nonlinearity using a simple control scheme.In this paper, TDC was applied to a pneumatic position control system consisting of a pneumatic cylinder and on-off type reed valves driven by PWM. The effectiveness of the pneumatic system controlled by TDC was confirmed with simulations and experiments. The main results are as follows : 1. A simple TDC controller was designed, in which the piston position, velocity, acceleration and derivative of acceleration are used as state variables.2. TDC can rapidly compensate for the nonlinearity in dynamics due to gas compressibility.3. This system always has a good response for any reference position and for any piston moving direction.4. The system is strong against modeling errors occurring at high frequencies due to the friction effect and so on if an estimated input gain of a plant is made larger than the real value. This study utilizing TDC demonstrates that a pneumatic position control system can be designed even by rough parameter identification, and that it always has a good response under a wide range of operating conditions.","PeriodicalId":219213,"journal":{"name":"Hydraulics & Pneumatics","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"1992-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125464886","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}