Sara Reyes, Austin Oursland, Madeleine Lee, Theodore J. Moody, M. Reynolds
{"title":"Dual-Polarized Electronic Mode Stirring for Improved Backscatter Communication Link Margin in a Reverberant Cavity Animal Cage Environment","authors":"Sara Reyes, Austin Oursland, Madeleine Lee, Theodore J. Moody, M. Reynolds","doi":"10.1109/RFID58307.2023.10178597","DOIUrl":"https://doi.org/10.1109/RFID58307.2023.10178597","url":null,"abstract":"It has previously been shown that the metal cages used for housing research animals resemble a reverberant cavity, presenting dense multi path interference for communication channels within the cage. This is due to the metal walls of such cages forming a resonant cavity having deep nulls at many locations within the cage volume. This creates significant challenges for neuroscience research where non-human primates are equipped with brain-computer interfaces (BCIs) to record neural activity. Prior work has shown that electronic mode stirring can be used to mitigate the deep nulls by selectively changing the electromagnetic boundary conditions on the cage walls. We present a novel dual-polarized 2.4 GHz electromagnetic mode stirring system consisting of integrated dual-polarized air dielectric patch antennas with CMOS RF switches enabling each polarization to be terminated in either a short or open condition and thus selectively changing the phase of reflection from the antennas. In initial testing over 72 surveyed locations within a test cage across the 2.4 GHz ISM band (2400–2483 MHz), dual-polarized mode stirring is shown to improve the worst-case two-way insertion loss between the BCI antenna and a cage-mounted antenna by 28.6 dB with dual-polarized mode stirring enabled, relative to without mode stirring. This approach is also shown to reduce the standard deviation of two-way insertion loss from 8.6 dB without mode stirring to 7.3 dB with dual-polarized mode stirring.","PeriodicalId":218858,"journal":{"name":"2023 IEEE International Conference on RFID (RFID)","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126853864","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Spyros Megalou, A. Chatzistefanou, S. Siachalou, T. Yioultsis, A. Dimitriou
{"title":"Lane Keeping through RFID","authors":"Spyros Megalou, A. Chatzistefanou, S. Siachalou, T. Yioultsis, A. Dimitriou","doi":"10.1109/RFID58307.2023.10178628","DOIUrl":"https://doi.org/10.1109/RFID58307.2023.10178628","url":null,"abstract":"In this paper we present a prototype method for guiding a user to a target by introducing RFID-lanes. The user is equipped with a portable RFID reader, which measures the phase of RFID tags arranged at known positions on the floor, forming lanes. By calculating the Rate Of Change (ROC) of the phase measurements of each tag along discrete time-steps, motion of the user can be accurately tracked, while proper direction-guidance is updated. The proposed method, calculates the user's direction of motion, by sorting the measured phase-ROCs from the nearby tags while keeping track of the user's position by feeding the phase- ROCs in a particle filter. Simulations and experimental results show precise localization and guidance while maintaining real-time computations.","PeriodicalId":218858,"journal":{"name":"2023 IEEE International Conference on RFID (RFID)","volume":"45 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130097886","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Ambiguity-Free 3D Millimeter-Precision RFID Tag Localization Inside Building Materials","authors":"Guoyi Xu, E. Kan","doi":"10.1109/RFID58307.2023.10178536","DOIUrl":"https://doi.org/10.1109/RFID58307.2023.10178536","url":null,"abstract":"Phase-based 3D radio-frequency identification (RFID) tag localization has the advantage of high accuracy, but the inherent phase-range ambiguity needs to be resolved by either frequency or spatial diversity. We propose a reliable 3D tag localization method that exploits spatial diversity to achieve millimeter-precision inside building materials with heavy multi-path interferences. We first obtain the functional relationship between differential phase and differential distance using polynomial fitting and optimization for reference tags and then evaluate the 3D positions of new tags given only phase measurements. A novel ambiguity-free algorithm is devised to identify the correct tag location from multiple candidates by leveraging redundant channel resources with spatial diversity. We prototyped the tag localization system on Universal Software Radio Peripheral (USRP) devices and harmonic backscatter RFID tags and demonstrated millimeter-level localization accuracy at 1.8 GHz second-harmonic carrier frequency inside building materials.","PeriodicalId":218858,"journal":{"name":"2023 IEEE International Conference on RFID (RFID)","volume":"122 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124515610","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Elisa Pantoja, R. Sreekumar, Sergiu Mosanu, Tommy Tracy, M. Stan
{"title":"Virtualized Controller for Computational RFID-based IoT Sensors","authors":"Elisa Pantoja, R. Sreekumar, Sergiu Mosanu, Tommy Tracy, M. Stan","doi":"10.1109/RFID58307.2023.10178612","DOIUrl":"https://doi.org/10.1109/RFID58307.2023.10178612","url":null,"abstract":"This paper presents a Computational Radio Frequency Identification (CRFID) system that utilizes far-field RF for sensing, computing, and self-powering. We created a virtual environment that uses radio frequency to transmit SPI instructions and enable wireless control of the RFID-based IoT sensors. Our system tackles the issue of energy constraints on RFID-based IoT sensors by transferring the computation load from the tag sensor to the reader, accomplished by the virtualization of SPI functions over the RF channel. This virtualization of functions enables the design of a circuit without a microcontroller, providing greater flexibility and allowing for wireless reconfiguration of tag functions over RF using wireless SPI instructions, even after deploying the devices for operation. Furthermore, the results demonstrate a 97% reduction in energy consumption compared to other energy-harvesting RFID tags with microcontrollers. As a result, the saved power budget, previously allocated to power the tag's microcontroller, is now used to power the tag sensors without requiring batteries, thus maximizing the efficiency of the harvested RF power. The solution proposed in this work integrates an RFID reader, Tx antenna, and RFID tag with an advanced virtualized controller to achieve a cost-effective and ultra-low-power solution combined with a full-scale computational capacity.","PeriodicalId":218858,"journal":{"name":"2023 IEEE International Conference on RFID (RFID)","volume":"29 17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117290419","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Reconstruction of Passive UHF RFID Tag Trajectories with a Distributed Antenna Reader System","authors":"Thomas M. Pohl, H. Arthaber, C. Mecklenbräuker","doi":"10.1109/RFID58307.2023.10178462","DOIUrl":"https://doi.org/10.1109/RFID58307.2023.10178462","url":null,"abstract":"We report on Ultra High Frequency (UHF) Radio Frequency Identification (RFID) phase measurements for the re-construction of passive RFID tag trajectories in an experimental setup. The setup consists of a UHF RFID reader connected to eight distributed antennas in a lab room. The antennas are multiplexed in time by phase-stable coaxial switches. The techniques of Gaussian processes are used to estimate missing phase values in the trajectory. The final tag's position in a two-dimensional space is estimated via an evaluation of the maximum phase difference in the trajectory, followed by a grid search to find the most probable position. For test measurements, this algorithm provides over a traveled distance of 15 m an Root-Mean-Square (RMS) error of approximately 50 cm.","PeriodicalId":218858,"journal":{"name":"2023 IEEE International Conference on RFID (RFID)","volume":"60 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133830756","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Tara Boroushaki, Maisy Lam, Weitung Chen, L. Dodds, A. Eid, Fadel M. Adib
{"title":"Exploiting Synergies between Augmented Reality and RFIDs for Item Localization and Retrieval","authors":"Tara Boroushaki, Maisy Lam, Weitung Chen, L. Dodds, A. Eid, Fadel M. Adib","doi":"10.1109/RFID58307.2023.10178452","DOIUrl":"https://doi.org/10.1109/RFID58307.2023.10178452","url":null,"abstract":"Locating RFID-tagged items in the environment and guiding humans to retrieve the tagged items is an important problem in the RFID community. This paper explores how to exploit synergies between Augmented Reality (AR) headsets and RFID localization to help solve this problem by improving both user experience and localization accuracy. Using fundamental mathematical formulations for RFID localization, we derive confidence metrics and display guidance to the user to improve their experience and enable them to retrieve items faster. We build our primitives into an end - to-end system, RF - AR, and show that it achieves 8.6 cm median localization accuracy within 76 seconds and enables 55% faster retrieval than state-of-the-art past systems. Our results demonstrate that AR-based “human-in-the-loop” designs can make the localization task more accurate and efficient, and thus holds the potential to improve processes where items need to be retrieved quickly, such as in manufacturing, retail, and warehousing.","PeriodicalId":218858,"journal":{"name":"2023 IEEE International Conference on RFID (RFID)","volume":"17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132782307","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A Cascade Structure with Burst Charging Mode for RF Energy Harvesting","authors":"Haoyu Jiang, Yuxiao Zhao, Zihan Wu, Hao Min","doi":"10.1109/RFID58307.2023.10178614","DOIUrl":"https://doi.org/10.1109/RFID58307.2023.10178614","url":null,"abstract":"This paper presents a novel RF energy harvest system with a burst charging mode, which achieves high sensitivity. The popular method to output high DC voltage under low input power is increasing the number of stages of the RF rectifier. However, this reduces the amplitude of the input RF signal and increases the power loss. When the amplitude of input RF signal is lower than the threshold voltage of MOSFET, the power conversion efficiency (PCE) of rectifier will drop sharply. Based on this principle, the proposed architecture uses a three-stage rectifier to output a direct-current (DC) voltage that exceeds the threshold voltage, and then uses a low-frequency charge pump working with a burst operation mode to output a high voltage. The post-layout simulation results show a -38.2 dBm sensitivity for 1 V output across a capacitive load in a 55nm CMOS process technology.","PeriodicalId":218858,"journal":{"name":"2023 IEEE International Conference on RFID (RFID)","volume":"85 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2023-06-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123983855","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}