2021 IEEE 2nd International Conference on Smart Technologies for Power, Energy and Control (STPEC)最新文献

筛选
英文 中文
Investigation of Power System Stabilizer PSS-3B in a Large Hydro Generating Unit 某大型水轮发电机组电力系统稳定器PSS-3B的研究
Barada Prasanna Nayak, K. Prabhakaran, T. Chelliah, P. Jena
{"title":"Investigation of Power System Stabilizer PSS-3B in a Large Hydro Generating Unit","authors":"Barada Prasanna Nayak, K. Prabhakaran, T. Chelliah, P. Jena","doi":"10.1109/stpec52385.2021.9718630","DOIUrl":"https://doi.org/10.1109/stpec52385.2021.9718630","url":null,"abstract":"Rotor angle and voltage stability are the most important aspects in stability studies of a power system. Ignorance of any of them will lead the system towards instability and subsequently to grid collapse. In this paper, disturbances caused by the rotor angle stability, such as oscillations in power delivery, deviation in rotor speed are discussed and the effect of power system stabilizer for damping of those oscillations are investigated. To realize the scenario, a synchronous generator connected with an infinity grid is considered as the test system and is modeled in Power System Computer Aided Design software. ST5B static excitation system is deployed to provide the field flux of the synchronous generator and the PSS3B power system stabilizer provides an additional stabilizing signal to the excitation system required for the improvement of the damping performance of the machine. To observe the dynamics of the machine, a fault was introduced at the middle of the transmission line. As the operating point changes in abnormal conditions, conventional PSS is unable to provide satisfactory performance. To overcome this drawback, PSS parameters were tuned by implementing the Down-hill simplex algorithm. It helped in reducing rotor angle oscillations and improving voltage stability as well. The behavior of the machine is presented in the results section to prove the superiority of the soft computing method over the conventional one.","PeriodicalId":208445,"journal":{"name":"2021 IEEE 2nd International Conference on Smart Technologies for Power, Energy and Control (STPEC)","volume":"74 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115006716","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Performance Assessment of SiC Switch based DC-DC Boost Converters for Solar PV Applications 太阳能光伏应用SiC开关DC-DC升压变换器的性能评估
U. Kalla, K. Agarwal
{"title":"Performance Assessment of SiC Switch based DC-DC Boost Converters for Solar PV Applications","authors":"U. Kalla, K. Agarwal","doi":"10.1109/STPEC52385.2021.9718712","DOIUrl":"https://doi.org/10.1109/STPEC52385.2021.9718712","url":null,"abstract":"Silicon carbide (SiC) is an engaging semiconductor for high-power and high-frequency devices. In this paper the study of design, steady-state and small signal analysis of Si and SiC based boost converter interfaced between SPV module and resistive load is discussed. Comparative performance is presented in the paper, regarding the steady sate and transient response of Si and SiC based converter interfaced between SPV module and load.","PeriodicalId":208445,"journal":{"name":"2021 IEEE 2nd International Conference on Smart Technologies for Power, Energy and Control (STPEC)","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115317544","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Three-load Cyclic Controlled Single-Stage AC-AC Resonant Converter for Induction Cooking Applications 用于感应烹饪的三负载循环控制单级交流-交流谐振变换器
Srinivas Khatroth, S. Porpandiselvi, N. Vishwanathan
{"title":"Three-load Cyclic Controlled Single-Stage AC-AC Resonant Converter for Induction Cooking Applications","authors":"Srinivas Khatroth, S. Porpandiselvi, N. Vishwanathan","doi":"10.1109/STPEC52385.2021.9718631","DOIUrl":"https://doi.org/10.1109/STPEC52385.2021.9718631","url":null,"abstract":"This paper presents single-stage AC-AC resonant converter for three load induction cooking (IC) applications. The proposed work features power factor correction, boost operation and independent power control of loads. In this work cyclic control technique is used for independent power control. Three legs of the inverter are used to power three loads. Number of switching devices per load is two. ZVS operation is achieved for load variation of wider range and high converter is obtained. The developed approach has fewer components and uses one leg per load on average. It may also be expanded to accommodate more than three loads.","PeriodicalId":208445,"journal":{"name":"2021 IEEE 2nd International Conference on Smart Technologies for Power, Energy and Control (STPEC)","volume":"16 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117204906","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
A Flexible Protection Approach for DC Microgrid Using Wavelet based Machine Learning Technique 基于小波的机器学习技术的直流微电网柔性保护方法
Sarvesh A. Wakode, Shrawan Kumar, M. Ballal
{"title":"A Flexible Protection Approach for DC Microgrid Using Wavelet based Machine Learning Technique","authors":"Sarvesh A. Wakode, Shrawan Kumar, M. Ballal","doi":"10.1109/STPEC52385.2021.9718684","DOIUrl":"https://doi.org/10.1109/STPEC52385.2021.9718684","url":null,"abstract":"In this paper, a protection scheme for a DC micro-grid is proposed. The proposed protection scheme’s novelty lies in its usage of concepts like K-means clustering, wavelet analysis, and machine learning techniques for fault detection. Current sample data is considered for different fault events. Using the K-means clustering, a low impedance fault is detected. For the discrimination of high impedance fault and sudden change in load condition, the data is processed with discrete wavelet transform and then fed into machine learning classifiers to get the fault information. The datasets are trained using an SVM classifier to obtain the results. The speed of operation of the classifier suits the requirement. A comparative analysis is done using other classifiers like KNN and NB for the best accuracy results. The proposed algorithm is tested on 5 bus ring-type DC microgrid using MATLAB/SIMULINK.","PeriodicalId":208445,"journal":{"name":"2021 IEEE 2nd International Conference on Smart Technologies for Power, Energy and Control (STPEC)","volume":"35 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125578332","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
Solar PV fed Battery Powered PMBLDCM driven Water Pumping System using Cuk Converter 采用Cuk转换器的太阳能光伏供电PMBLDCM驱动水泵系统
U. Kalla, Shiv Pratap Singh Rajawat, Sanjeev Singh, Nikhil Bhati
{"title":"Solar PV fed Battery Powered PMBLDCM driven Water Pumping System using Cuk Converter","authors":"U. Kalla, Shiv Pratap Singh Rajawat, Sanjeev Singh, Nikhil Bhati","doi":"10.1109/STPEC52385.2021.9718691","DOIUrl":"https://doi.org/10.1109/STPEC52385.2021.9718691","url":null,"abstract":"Solar PV-powered pumps are a good alternative for grid-connected and diesel-based pumps in agriculture in the Indian Context. PMBLDCM (permanent-magnet brushless DC motor) has advanced characteristics in comparison to DC & induction motors like high torque to weight ratio, less maintenance, higher efficiency, and simple structure and therefore becoming popular for agriculture-based water pumping and other wide range of applications. This paper presents a solar PV-fed battery-based BLDC motor drive for water pumping applications with InC based MPPT scheme for efficient and optimum power generation. In this article, a two-stage power conversion-based PMBLDCM drive is presented, the first stage is DC to DC Cuk converter to achieve the required MPP voltage level and the second stage is an inverter to get an optimum AC power supply for an effective 1200 mode of conduction. The overall scheme operates in three modes, in the first mode both battery charging and motor pumping operation takes place simultaneously, in the second mode, only battery charging takes place, in the third mode, SPV doesn’t generate any power, and the motor operation is powered by the battery. The proposed scheme is simulated in a MATLAB-Simulink software environment and the obtained results are presented to prove the effectiveness of the proposed drive.","PeriodicalId":208445,"journal":{"name":"2021 IEEE 2nd International Conference on Smart Technologies for Power, Energy and Control (STPEC)","volume":"143 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114598422","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Performance Analysis of Modular CHB MLI and Conventional Three-Phase Inverter for Three-Phase Induction Motor Application 模块化CHB MLI与传统三相逆变器在三相感应电机中的性能分析
B. Sathyavani, S. TaraKalyani
{"title":"Performance Analysis of Modular CHB MLI and Conventional Three-Phase Inverter for Three-Phase Induction Motor Application","authors":"B. Sathyavani, S. TaraKalyani","doi":"10.1109/STPEC52385.2021.9718744","DOIUrl":"https://doi.org/10.1109/STPEC52385.2021.9718744","url":null,"abstract":"Multilevel inverter (MLI) is an efficient controllable power converter and turned as a prerequisite for various industrial, traction, energy storage, and domestic applications. In drive applications, minimizing total harmonic distortion (THD) plays a key role in attaining smooth and ripple-free torque-speed characteristics. To analyze the performance of MLI for motor application, a nine-level cascaded H-bridge MLI is considered and implemented with carrier-based PWM in a MATLAB environment. However, to validate its superiority, a simple three-phase two-level bridge inverter controlled by the popular space vector pulse width modulation (SVM) is considered for comparison. Furthermore, induction motor (IM) characteristics are analyzed for both normal and abnormal operating conditions in CHB-MLI. The overall performance of the inverter fed IM drive is demonstrated for various CHB-MLI configurations under faulty switch operation in Simulink environment using MATLAB.","PeriodicalId":208445,"journal":{"name":"2021 IEEE 2nd International Conference on Smart Technologies for Power, Energy and Control (STPEC)","volume":"81 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128229071","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
An Improved Synchronverter Control for DERs Under Grid Voltage Variations 电网电压变化条件下DERs同步器控制的改进
R. Hariharan, M. Mishra
{"title":"An Improved Synchronverter Control for DERs Under Grid Voltage Variations","authors":"R. Hariharan, M. Mishra","doi":"10.1109/STPEC52385.2021.9718650","DOIUrl":"https://doi.org/10.1109/STPEC52385.2021.9718650","url":null,"abstract":"Synchronverter (SV) or virtual synchronous generator (VSG) control for distributed energy resources (DERs) has been popular recently due to the emulation of synchronous generator (SG) behaviour. For the configuration of basic SV controlled DERs connected to grid, variations in grid voltage amplitude within normal range leads to transients in current. Virtual impedance implementation to VSG or SV controlled DERs has the drawbacks of partial current transients suppression, adverse effect of high virtual impedance on system stability and arbitrary design of virtual impedance. Hence, the reactive power loop (RPL) of SV control is improved in this work by incorporating the measured grid voltage rms value. Effective suppression of current transients by the improved SV control is shown through small signal analysis and it is verified by simulations. Further, the SV control with improvement to RPL is tested for grid fault conditions, and it is observed that the current during fault and the current transient after fault recovery might become large. Thus, simple changes to parameters in APL during fault conditions are proposed to keep the current within limits during fault and after fault recovery as well.","PeriodicalId":208445,"journal":{"name":"2021 IEEE 2nd International Conference on Smart Technologies for Power, Energy and Control (STPEC)","volume":"33 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128764418","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 3
Design and Development of Cost-Effective Solar PV Based DC Microgrid for Rural Applications 基于太阳能光伏的低成本农村直流微电网的设计与开发
S. P. Gawande, N. P. Battulwar, A. Raut, P. Meshram, P. Chaturvedi, P. Fulzele
{"title":"Design and Development of Cost-Effective Solar PV Based DC Microgrid for Rural Applications","authors":"S. P. Gawande, N. P. Battulwar, A. Raut, P. Meshram, P. Chaturvedi, P. Fulzele","doi":"10.1109/STPEC52385.2021.9718706","DOIUrl":"https://doi.org/10.1109/STPEC52385.2021.9718706","url":null,"abstract":"To provide quality and reliable energy demand Renewable Energy Sources (RES) are integrated with conventional AC grid. However, many challenges can arise while interfacing the renewable energy sources with AC grid. Recent research has proved that the establishment of smart grids with integration of utility grid and renewable sources can provide highly reliable and more competent power system in the cost-effective manner. In India there are many rural areas which have limited supply of electricity. For such location DC microgrid is an attractive and effective technology because of its easy interfacing with renewable sources, utility grid, DC loads and battery storage system. Also, DC grid is proved to be much better over AC grid. This paper describes the implementation of DC microgrid technology for rural electrification that covers solar photovoltaic (PV), AC interfaces, system architecture and energy storage system. The system is purely considered for rural remote locations with or without AC grid. The loads are considered as LED lights, and DC operated Fan. The different switching conditions are considered with load, PV, battery and utility grid. The system is simulated by using MATLAB/Simulink and comprehensive analysis is provided to show the efficiency of the system. Also, the paper provides advantages and challenges of using DC microgrid technology in rural electrification.","PeriodicalId":208445,"journal":{"name":"2021 IEEE 2nd International Conference on Smart Technologies for Power, Energy and Control (STPEC)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130320252","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
High Gain Switched Inductor-Capacitor Split Source Inverter 高增益开关电感-电容分源逆变器
K. P. Remya, J. Mathew, V. Nandana
{"title":"High Gain Switched Inductor-Capacitor Split Source Inverter","authors":"K. P. Remya, J. Mathew, V. Nandana","doi":"10.1109/STPEC52385.2021.9718746","DOIUrl":"https://doi.org/10.1109/STPEC52385.2021.9718746","url":null,"abstract":"Most of the solar photovoltaic and fuel cell systems transfer electrical energy to the grid through an inverter preceded by a boost converter. For increasing the voltage gain and conversion efficiency, this two-stage architecture can be replaced by single-stage dc to ac converters. One such recently introduced single-stage dc to ac converter is the split source inverter (SSI). However, the limited voltage gain of SSI makes it less suitable for high voltage-gain applications. In this paper, a new switched inductor-capacitor split source inverter (SLC SSI) topology with high voltage-gain is proposed by integrating a switched inductor-capacitor dc to dc converter with a conventional split source inverter. In comparison with conventional SSI and switched inductor SSI topologies, the proposed SLC SSI topology provides much higher voltage gain. A unipolar sinusoidal pulse width modulation scheme is employed to make the control simple to implement. A 100W SLC SSI has been designed and the performance has been verified through simulation in MATLAB/ Simulink.","PeriodicalId":208445,"journal":{"name":"2021 IEEE 2nd International Conference on Smart Technologies for Power, Energy and Control (STPEC)","volume":"15 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127964508","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Design and Control of Smart Loads With Battery System 智能负载蓄电池系统的设计与控制
Sourabh Jain, S. Sharma
{"title":"Design and Control of Smart Loads With Battery System","authors":"Sourabh Jain, S. Sharma","doi":"10.1109/STPEC52385.2021.9718739","DOIUrl":"https://doi.org/10.1109/STPEC52385.2021.9718739","url":null,"abstract":"Smart load is one of the emerging technique for demand side management. This paper deals with smart load based on the second generation of an Electric spring (ES-2). The proposed controller for an ES-2 allows controlling an active and reactive power of supply under dynamic changes in supply or load demand. A modified instantaneous p-q theory computes an active and reactive power. A systematic design of an ES-2 is presented in this paper. The reference switching signals are obtained for control of ES-2 using proposed instantaneous p-q theory without using any kind of phase locked loop (PLL). A proposed system facilitates consumer to schedule their load demands in a strategic manner. A Full bridge power converter is employed in ES-2. Proposed concept of smart load is presented and validated under different dynamic conditions.","PeriodicalId":208445,"journal":{"name":"2021 IEEE 2nd International Conference on Smart Technologies for Power, Energy and Control (STPEC)","volume":"31 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131934436","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书