发布求助
文献互助 智能选刊 最新文献

International Journal of Advanced Materials Manufacturing and Characterization最新文献

筛选
英文 中文
Machines and AGVs Scheduling in Flexible Manufacturing System With Mean Tardiness Criterion 基于平均延迟准则的柔性制造系统机械与agv调度
International Journal of Advanced Materials Manufacturing and Characterization Pub Date : 2014-08-10 DOI: 10.11127/IJAMMC.2014.08.04
M. Nageswararao, K. Narayanarao, G. Ranagajanardhana
{"title":"Machines and AGVs Scheduling in Flexible Manufacturing System With Mean Tardiness Criterion","authors":"M. Nageswararao, K. Narayanarao, G. Ranagajanardhana","doi":"10.11127/IJAMMC.2014.08.04","DOIUrl":"https://doi.org/10.11127/IJAMMC.2014.08.04","url":null,"abstract":"Optimum Automated Guided Vehicles (AGVs) operation plays a crucial role in improving the performance of Flexible Manufacturing System (FMS). One of the main elements in the implementation of AGV is task scheduling. This will enhance the productivity, Minimize delivery cost and optimally utilize the entire fleet. This enhance article Deals with Hybrid Genetic Vehicle Heuristic Algorithm (HGVHA) for simultaneous Scheduling of machines and AGVs adopting minimization of makespan and minimization of mean tardiness. The method is found to provide better solution.","PeriodicalId":207087,"journal":{"name":"International Journal of Advanced Materials Manufacturing and Characterization","volume":"187 1‐2","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-08-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120831447","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 11
Vibration and Buckling of Composite Plates in Hygrothermal Environment 复合材料板在湿热环境中的振动与屈曲
International Journal of Advanced Materials Manufacturing and Characterization Pub Date : 2014-03-07 DOI: 10.11127/IJAMMC.2014.03.10
M. Rath
{"title":"Vibration and Buckling of Composite Plates in Hygrothermal Environment","authors":"M. Rath","doi":"10.11127/IJAMMC.2014.03.10","DOIUrl":"https://doi.org/10.11127/IJAMMC.2014.03.10","url":null,"abstract":"A B S T R A C T The present study deals with numerical investigation on vibration and buckling behavior of laminated composite plates subjected to varying temperature and moisture concentration. Quantitative results are presented to show the effects of geometry, material and lamination parameters of woven fiber laminate on vibration and buckling of composite plates for different temperature and moisture concentrations. woven fiber, buckling loads in KN. free vibration, frequency, composites,","PeriodicalId":207087,"journal":{"name":"International Journal of Advanced Materials Manufacturing and Characterization","volume":"27 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123075019","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 4
Formulation and Characterization of Materials Containing Natural Antimicrobial Agents for Food Packaging Applications 食品包装用含天然抗菌剂材料的配方及特性研究
International Journal of Advanced Materials Manufacturing and Characterization Pub Date : 2014-03-07 DOI: 10.11127/IJAMMC.2014.03.01
S. Bigger, M. Cran
{"title":"Formulation and Characterization of Materials Containing Natural Antimicrobial Agents for Food Packaging Applications","authors":"S. Bigger, M. Cran","doi":"10.11127/IJAMMC.2014.03.01","DOIUrl":"https://doi.org/10.11127/IJAMMC.2014.03.01","url":null,"abstract":"","PeriodicalId":207087,"journal":{"name":"International Journal of Advanced Materials Manufacturing and Characterization","volume":"81 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133514450","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 2
Electroless plating of copper on different shaped ABS parts: A comparison 不同形状ABS零件化学镀铜的比较
International Journal of Advanced Materials Manufacturing and Characterization Pub Date : 2014-03-07 DOI: 10.11127/IJAMMC.2014.03.05
A. Equbal, A. K. Sood
{"title":"Electroless plating of copper on different shaped ABS parts: A comparison","authors":"A. Equbal, A. K. Sood","doi":"10.11127/IJAMMC.2014.03.05","DOIUrl":"https://doi.org/10.11127/IJAMMC.2014.03.05","url":null,"abstract":"A B S T R A C T Metallization of ABS part has been studied on four different geometries namely cuboidal, cylindrical, pyramid and cone. These parts are fabricated on a FDM (fused deposition modelling) machine through layer by layer deposition process using ABS (acrylonitrile-butadiene-styrene) as parent material. Copper is deposited by electroless deposition method on all these fabricated parts using aluminium charcoal paste. The deposition process is also validated using four different acidic baths. The acidic baths used are 5% CuSO4 with 15% of individual Hydrofluoric acid (HF), Sulphuric acid (H2SO4), Phosphoric acid (H3PO4) and Acetic acid (CH3COOH). Copper deposition under different acidic baths for different deposition time is presented with their electrical performance measurement. The results show that cuboidal sample demonstrated better electrical performance in all acidic baths in comparison to other geometries involved. The results also propose that hydrofluoric acid gives best performance for all the geometries when compared with other acidic bath adopted.","PeriodicalId":207087,"journal":{"name":"International Journal of Advanced Materials Manufacturing and Characterization","volume":"66 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115568033","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 6
Precision Drilling of Glass Fiber Reinforced Composite (GFRP) with Modified HSS Drill Geometry 改进高速钢钻头几何形状的玻璃纤维增强复合材料(GFRP)精密钻孔
International Journal of Advanced Materials Manufacturing and Characterization Pub Date : 2014-03-07 DOI: 10.11127/IJAMMC.2014.03.11
D. Thakur
{"title":"Precision Drilling of Glass Fiber Reinforced Composite (GFRP) with Modified HSS Drill Geometry","authors":"D. Thakur","doi":"10.11127/IJAMMC.2014.03.11","DOIUrl":"https://doi.org/10.11127/IJAMMC.2014.03.11","url":null,"abstract":"Even though near net shape manufacturing of fiber reinforced plastics (FRP) is possible, drilling is an unavoidable operation, particularly for assembly of structures/panels having holes of specified dimensional tolerance, surface texture and integrity. In the present work drilling tests were carried out on GFRP composites with conventional HSS (18-4-1) drill bit and then by modifying the drill geometry (web or chisel edge ) i.e. web thinning in order to show the effect of drill geometry in general and web (chisel edge) in particular on the performance of the drilling of GFRP composite. It is observed that the fiber orientations and drill geometry plays a vital role on the cut quality and delamination.","PeriodicalId":207087,"journal":{"name":"International Journal of Advanced Materials Manufacturing and Characterization","volume":"198 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133840359","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 8
Defect Location and Sizing by Ultrasonic Phased Array on Aero Grade Material Aluminum He-15 航空级材料He-15铝的超声相控阵缺陷定位与尺寸测定
International Journal of Advanced Materials Manufacturing and Characterization Pub Date : 2014-03-07 DOI: 10.11127/ijammc.2014.03.07
S. V. Ranganayakulu, A. Kucheludu, B. Bhadraiah, B. Kumar
{"title":"Defect Location and Sizing by Ultrasonic Phased Array on Aero Grade Material Aluminum He-15","authors":"S. V. Ranganayakulu, A. Kucheludu, B. Bhadraiah, B. Kumar","doi":"10.11127/ijammc.2014.03.07","DOIUrl":"https://doi.org/10.11127/ijammc.2014.03.07","url":null,"abstract":"This paper gives the orientation and inspection of aero grade material by using Ultrasonic Phased Array over conventional methods. The dimension of material sample HE15 is 150*120*10. Two defragmented aluminum alloys are joined by welding process known as Tungsten Inert Gas Welding. Inspection of material is carried out by various Non Destructive Testing methods namely ultrasonic method, radiography method, liquid penetrant and Phased array technique. Sensitivity of material is noticed by scanning of ultrasonic phased array and pulse echo technique method alternatively defects are detected by other NDT methods namely X-ray, Ultrasonic phased array technique and LPT. Few surface flaws are noticed at a depth of 2mm by LPT method. Porosity and inclusion defects are better traceout through phased array and X-ray radiography respectively. Ultrasonic Phased Array sectorial scan technique produces immediate images, allowing straight forward visualization of the internal structure and simplifying data interpretation of weld joint. The defect is identified and located by Ultrasonic Phased array Dynamic depth focusing Technique.","PeriodicalId":207087,"journal":{"name":"International Journal of Advanced Materials Manufacturing and Characterization","volume":"36 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115850369","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Characterization of Sn-Bi and Sn-Bi-Zn alloys Sn-Bi和Sn-Bi- zn合金的表征
International Journal of Advanced Materials Manufacturing and Characterization Pub Date : 2014-03-07 DOI: 10.11127/IJAMMC.2014.03.08
K. S. Vadayar, S. Rani
{"title":"Characterization of Sn-Bi and Sn-Bi-Zn alloys","authors":"K. S. Vadayar, S. Rani","doi":"10.11127/IJAMMC.2014.03.08","DOIUrl":"https://doi.org/10.11127/IJAMMC.2014.03.08","url":null,"abstract":"A B S T R A C T Lead-free solders are offering better alternative properties compared to the conventional Sn-Pb solders. The requirements of soldered joints and solder alloys are good mechanical properties, wettability etc. The present work is about the investigation of tensile and shears properties of two alloys Sn-58Bi and Sn-57Bi-1.3Zn in comparison with conventional Sn-38Pb alloy. Contact angle, spread in area and capillary rise is also investigated in the present work. It is observed that the lead free solders have better mechanical properties in comparison with conventional Sn-38Pb alloy. The alloys exhibited good wettability behavior thereby exhibiting good solderability properties. SEM studies of tensile and shear fracture show ductile mode of fracture for Sn-Pb and Sn-Bi-Zn alloys whereas cleavage facets were observed incase of Sn-Bi alloy. Sn-Bi and Sn-Bi-Zn alloys are attractive alternatives to Sn-Pb solders in the lower processing temperatures like in printed circuit boards and other applications.","PeriodicalId":207087,"journal":{"name":"International Journal of Advanced Materials Manufacturing and Characterization","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129954755","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 6
Automated Vision Inspection System for a Plastic Injection Mould Component 注塑模零件的自动视觉检测系统
International Journal of Advanced Materials Manufacturing and Characterization Pub Date : 2014-03-07 DOI: 10.11127/IJAMMC.2014.03.04
R. Deepa, S. Usha, P. V. S. Kumar
{"title":"Automated Vision Inspection System for a Plastic Injection Mould Component","authors":"R. Deepa, S. Usha, P. V. S. Kumar","doi":"10.11127/IJAMMC.2014.03.04","DOIUrl":"https://doi.org/10.11127/IJAMMC.2014.03.04","url":null,"abstract":"This paper presents an automated vision based defect inspection and sorting system for a plastic injection mould component called a Retractor Retaining Bush, which is an automotive safety critical component. The system identifies defects which usually occur in a plastic injection mould component. Various types of sensors and actuators were interfaced with the vision hardware and the part handling mechanism, to complete the total automated vision based inspection system.","PeriodicalId":207087,"journal":{"name":"International Journal of Advanced Materials Manufacturing and Characterization","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126666951","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Thermal Analysis of Vacuum Chamber of Q-Machine q -机真空室热分析
International Journal of Advanced Materials Manufacturing and Characterization Pub Date : 2014-03-07 DOI: 10.11127/IJAMMC.2014.03.12
Akash S. Bage, N. Ramsubramanian
{"title":"Thermal Analysis of Vacuum Chamber of Q-Machine","authors":"Akash S. Bage, N. Ramsubramanian","doi":"10.11127/IJAMMC.2014.03.12","DOIUrl":"https://doi.org/10.11127/IJAMMC.2014.03.12","url":null,"abstract":"Plasma is a partially ionized gas in which a certain portion of electrons are free rather than being bound to an atom or molecule. The steady state plasma is produced by a machine named QMachine as the plasma is formed by Quiescent. In this device the Plasma source is a hot plate “heated to 2700K by electron bombardment. The vacuum chamber of Q-machine is a part of an experimental proposal for cesium plasma confined in a multi-cusp magnetic field at IPR. In this paper study the temperature distribution of a vacuum chamber by using ANSYS 13 software is to carried out thermal analysis..","PeriodicalId":207087,"journal":{"name":"International Journal of Advanced Materials Manufacturing and Characterization","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115522713","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Advanced Composite Micro-Hydro Turbine Wheel Design and Study Its Performance for Power Generation 新型复合微水轮机设计及发电性能研究
International Journal of Advanced Materials Manufacturing and Characterization Pub Date : 2014-03-07 DOI: 10.11127/IJAMMC.2014.03.09
A. Shirisha, Vinod Kumar, Sanjeev Kumar, K. Varun, A. Bhavana
{"title":"Advanced Composite Micro-Hydro Turbine Wheel Design and Study Its Performance for Power Generation","authors":"A. Shirisha, Vinod Kumar, Sanjeev Kumar, K. Varun, A. Bhavana","doi":"10.11127/IJAMMC.2014.03.09","DOIUrl":"https://doi.org/10.11127/IJAMMC.2014.03.09","url":null,"abstract":"Recently, Advance composite materials have taken the significant share with other engineering materials due to its mechanical properties and high strength to weight ratio. Advance composite like Carbon fibre, woven roving, chopped strand mat, are not confined at the aerospace industry but gradually these are taking over the position of other industries as well. Micro-hydro power turbines are an attractive option for providing electricity in off grid areas of the country and a good alternative energy source for production of energy. The simple pelton and cross-flow turbines are predominantly used for these projects as they are cheaper to construct for this form of renewable energy. Pelton wheel is a most efficient impulse turbine for medium and high head hydro sites. It is general practice to use brass/aluminium or some time stainless steel for the construction of Pelton wheel buckets. Making some changes and improvements to the existing design we can use these micro turbines at the water pumps where the pressure in the water is not used. This can ensure that more households in the catchment area get more than just lighting, but are able to use other devices such as refrigerators, stoves etc., in their houses. Manufacturing buckets with Advance composite materials is not yet common though it is light, durable and corrosion resistant. In this paper endeavour has taken to design and fabricate a micro-hydro turbine wheel where runner and seven buckets have been designed and developed after careful analyzing the various parameters of Composite design criterion. Woven rowing, Chopped Glass fibres have been used as reinforcing fibres with polyester matrix for bucket design and manufacturing.","PeriodicalId":207087,"journal":{"name":"International Journal of Advanced Materials Manufacturing and Characterization","volume":"53 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2014-03-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126323121","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
首页 上一页 下一页 尾页
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整，为了账户安全，请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们：info@booksci.cn Book学术提供免费学术资源搜索服务，方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号：481959085
Book学术官方微信