International Journal of Engineering Materials and Manufacture最新文献_第8页

Validation and Verification of CFD Prediction of Fluid Flow of a Submerged Vertical Round Jet 水下垂直圆射流流场CFD预测的验证与验证

International Journal of Engineering Materials and Manufacture Pub Date : 2018-06-15 DOI: 10.26776/IJEMM.03.02.2018.06

N. Hasan, A. Rahman, Md.S. Alam

引用次数: 4

Modelling and optimization of Chromium Powder Mixed EDM Parameter Effect Over the Surface Characteristics by Response Surface Methodology Approach 响应面法模拟和优化铬粉混合电火花加工参数对表面特性的影响

International Journal of Engineering Materials and Manufacture Pub Date : 2018-06-08 DOI: 10.26776/IJEMM.03.02.2018.02

Nor Ain Binti Jamil Hosni, M. A. Lajis, M. Idris

引用次数: 8

Parametric Effect on Surface Finish of Three-Dimensional Printed Object 参数对三维打印物体表面光洁度的影响

International Journal of Engineering Materials and Manufacture Pub Date : 2018-06-04 DOI: 10.26776/IJEMM.03.02.2018.04

M. Hasan, Shugata Ahmed, Ron Voldman, Mirt Mehany

引用次数: 1

Greenhouse Gas Emission of Broiler Chicken Production in Malaysia using Life Cycle Assessment Guidelines: A Case Study 使用生命周期评估指南的马来西亚肉鸡生产温室气体排放:案例研究

International Journal of Engineering Materials and Manufacture Pub Date : 2018-06-04 DOI: 10.26776/IJEMM.03.02.2018.03

S. Suffian, A. A. Sidek, T. Matsuto, M. A. Al Hazza, H. Yusof, A. Hashim

{"title":"Greenhouse Gas Emission of Broiler Chicken Production in Malaysia using Life Cycle Assessment Guidelines: A Case Study","authors":"S. Suffian, A. A. Sidek, T. Matsuto, M. A. Al Hazza, H. Yusof, A. Hashim","doi":"10.26776/IJEMM.03.02.2018.03","DOIUrl":"https://doi.org/10.26776/IJEMM.03.02.2018.03","url":null,"abstract":"The aim of this research was to evaluate the level of greenhouse gas emission from broiler chicken farming industry in Malaysia. In order to achieve that, Life Cycle Assessment method was chosen as a framework to complete the task. A case study was conducted at a broiler chicken farm to gather the data and information related to the broiler chicken production. Cradle-to-gate assessment including distribution stage was conducted based on the ISO14040/1044 guidelines. Inventory data for this case study was gathered in collaboration with one of the selected case study broiler chicken farm company. Greenhouse gas emission that consists of several most affected gases such as carbon dioxide, methane and nitrous oxide was studied. Result shows that the highest carbon dioxide emission came from manure, which accounted for 1,665,342 kg CO2 equivalent per total broilers while the highest methane emission came from feed, which accounted for 126,207.84 g CH4 equivalent per total broilers. For nitrous oxide emission, the highest values came from bedding which accounted for 20,316.87 g N2O equivalent per total broilers in the commercial modern broiler chicken farm. In this case study, it can be concluded that manure gives the most prominent effect to the greenhouse gas emission followed by feed and bedding materials. ","PeriodicalId":201987,"journal":{"name":"International Journal of Engineering Materials and Manufacture","volume":"158 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-06-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114533483","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 4

Effect of UV Radiation on Degradation of Durian Skin Fibre Composite 紫外线辐射对榴莲皮纤维复合材料降解的影响

International Journal of Engineering Materials and Manufacture Pub Date : 2018-06-04 DOI: 10.26776/IJEMM.03.02.2018.05

Siti Munirah Salimah Abd Rashid, H. Anuar, Siti Nur E’zzati Mohd Apandi, Y. Buys

{"title":"Effect of UV Radiation on Degradation of Durian Skin Fibre Composite","authors":"Siti Munirah Salimah Abd Rashid, H. Anuar, Siti Nur E’zzati Mohd Apandi, Y. Buys","doi":"10.26776/IJEMM.03.02.2018.05","DOIUrl":"https://doi.org/10.26776/IJEMM.03.02.2018.05","url":null,"abstract":"Durian skin fibre (DSF) reinforced high-density polyethylene (HDPE) composite was fabricated by melt-blending and then compression moulded. As DSF is polar and hydrophilic in nature, while HDPE is non-polar and hydrophobic, thus the adhesion between them is low. Therefore, maleic anhydride-grafted-polyethylene (MAPE) was added to enhance the interaction of HDPE and DSF. This paper highlight the effect of MAPE on UV degradation exposure on HDPE/DSF composite. DSF content from 10, 20, 30 and 40 wt% were immersed in water for 70 days. In the absence of MAPE, water absorption increased with DSF loadings. Furthermore, tensile properties of HDPE/DSF composite was degraded after 500, 1000 and 2000 h of UV radiation exposure. Morphological observation under SEM showed that the fibre and matrix became less interacted after exposed to UV radiation. Voids and gaps between HDPE and DSF in the presence of MAPE were reduced as revealed under SEM micrographs. The colour index of the HDPE/DSF composite was increased and became whiter with UV radiation exposure. This showed that MAPE significantly improved the interaction of HDPE/DSF composite.","PeriodicalId":201987,"journal":{"name":"International Journal of Engineering Materials and Manufacture","volume":"3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-06-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121556120","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 0

Statistical Monitoring and Optimization of Electrochemical Machining using Shewhart Charts and Response Surface Methodology 基于Shewhart图和响应面法的电化学加工统计监测与优化

International Journal of Engineering Materials and Manufacture Pub Date : 2018-06-04 DOI: 10.26776/IJEMM.03.02.2018.01

A. Maged, S. Haridy, M. Shamsuzzaman, I. Alsyouf, Roubi A. Zaied

{"title":"Statistical Monitoring and Optimization of Electrochemical Machining using Shewhart Charts and Response Surface Methodology","authors":"A. Maged, S. Haridy, M. Shamsuzzaman, I. Alsyouf, Roubi A. Zaied","doi":"10.26776/IJEMM.03.02.2018.01","DOIUrl":"https://doi.org/10.26776/IJEMM.03.02.2018.01","url":null,"abstract":"The response surface methodology (RSM) and Shewhart control charts have been widely used in manufacturing to reduce variation, improve quality and optimize the output. This article proposes an application of individuals & moving range chart (I&MR) and RSM in electrochemical machining. The Shewhart-type I&MR control chart and RSM are combined together in an effective way to successfully guarantee the statistical control of the surface roughness (Ra) of the items produced by wire electrochemical turning, and meanwhile optimize Ra by exploring the optimal values of the machining parameters including applied voltage, wire feed rate, wire diameter, rotational speed and overlap distance. The conducted experiments reveal that the optimal values of the aforementioned factors are 23.67, 0.5, 0.2, 900 and 0.02, respectively. A second-order regression model is also developed to predict the output (Ra) at different combinations of the input parameters. The developed regression model can predict the output values with a determination coefficient (R2) of 96.9%. The proposed combined scheme of Shewhart charts and RSM can be employed in other manufacturing processes and even in different service sectors to efficiently enhance the performance and reduce the cost.","PeriodicalId":201987,"journal":{"name":"International Journal of Engineering Materials and Manufacture","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2018-06-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129781216","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

引用次数: 11

Characteristics Analysis of Dual Bell Nozzle using Computational Fluid Dynamics 基于计算流体力学的双钟形喷嘴特性分析

International Journal of Engineering Materials and Manufacture Pub Date : 2017-12-01 DOI: 10.26776/IJEMM.04.01.2019.02

Y. M. Akib, Asif Kabir, M. Hasan

引用次数: 4