Yuchao Yan, Linglan Wang, Huilian Ma, D. Ying, Zhong-he Jin
{"title":"Hybrid air-core photonic bandgap fiber ring resonator and implications for resonant fiber optic gyro","authors":"Yuchao Yan, Linglan Wang, Huilian Ma, D. Ying, Zhong-he Jin","doi":"10.1117/12.2184415","DOIUrl":"https://doi.org/10.1117/12.2184415","url":null,"abstract":"A novel hybrid polarization-maintaining (PM) air-core photonic bandgap fiber (PBF) ring resonator is demonstrated by using a conventional PM fiber coupler formed by splicing a section of air-core PBF into the resonator. The coupling loss between the PM air-core PBF and the conventional solid-core PM fiber is reduced down to ∼1.8 dB per junction. With the countermeasures proposed to reduce the backscattering induced noise, a bias stability of approximately 0.007 °/s was observed over a 1 hour timeframe, which is the best result reported to date, to the best of our knowledge, for RFOGs equipped with a hybrid air-core PBF ring resonator.","PeriodicalId":183307,"journal":{"name":"Asia Pacific Optical Sensors Conference","volume":"76 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-07-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127356577","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Zeyuan Kuang, Linghao Cheng, Yizhi Liang, Hao Liang, B. Guan
{"title":"Fiber-optic Doppler velocimeter based on a dual-polarization fiber grating laser","authors":"Zeyuan Kuang, Linghao Cheng, Yizhi Liang, Hao Liang, B. Guan","doi":"10.1117/12.2184233","DOIUrl":"https://doi.org/10.1117/12.2184233","url":null,"abstract":"A fiber-optic Doppler velocimeter based on a dual-polarization fiber grating laser is demonstrated. The fiber grating laser produces two orthogonally polarized laser outputs with their frequency difference proportional to the intra-cavity birefringence. When the laser outputs are reflected from a moving targets, the laser frequencies will be shifted due to the Doppler effect. It shows that the frequency difference between the beat note of the laser outputs and the beat note of the reflected lasers is proportional to the velocity. The proposed fiber-optic Doppler velocimeter shows a high sensitivity of 0.64 MHz/m/s and is capable of measurement of wide range of velocity.","PeriodicalId":183307,"journal":{"name":"Asia Pacific Optical Sensors Conference","volume":"17 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-07-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126767960","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jianjie Zhang, Linglan Wang, Huilian Ma, Zhong-he Jin
{"title":"Performance of closed-loop resonant micro-optic gyro with hybrid digital phase modulation","authors":"Jianjie Zhang, Linglan Wang, Huilian Ma, Zhong-he Jin","doi":"10.1117/12.2184125","DOIUrl":"https://doi.org/10.1117/12.2184125","url":null,"abstract":"A double closed-loop resonant micro optic gyro (RMOG) employing a hybrid digital phase modulation technique is demonstrated, showing encouraging progress. In this hybrid modulation scheme, the width of one stair of the stair-like digital serrodyne wave is optimized according to the rise time of the digital-to-analogue converter to obtain the maximum sideband suppression. Based on the optimum parameters of the hybrid modulation scheme, a typical bias stability of 0.05/s in 1 hr is demonstrated in an RMOG with a silica waveguide ring resonator having a ring length of 7.9 cm. This is the best long-term performance which has ever been reported in an RMOG to our knowledge.","PeriodicalId":183307,"journal":{"name":"Asia Pacific Optical Sensors Conference","volume":"279 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-07-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129979830","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
P. G. Trannin, M. S. Milczewski, Walmir de Oliveira, O. Guariza Filho, S. C. P. S. Lopes, H. Kalinowski
{"title":"Orthodontic mechanics using mini-implant measured by FBG","authors":"P. G. Trannin, M. S. Milczewski, Walmir de Oliveira, O. Guariza Filho, S. C. P. S. Lopes, H. Kalinowski","doi":"10.1117/12.2185151","DOIUrl":"https://doi.org/10.1117/12.2185151","url":null,"abstract":"The magnitude of the force generated during orthodontic mechanics anchored in mini-implant in a maxilla model was analyzed. Data was collected during the insertion of the mini-implant and at the moment of applying forces to the structure of the maxilla and dentition. To obtain quantitative results, the Fibre Bragg Gratings (FBG) were inserted in an elastomeric material reproducing a maxilla model. It was observed levels of forces of approximately 3,78N next to the root of first premolar by the insertion of the mini-implant and different levels of the force to different orthodontic mechanics applied on the dental system.","PeriodicalId":183307,"journal":{"name":"Asia Pacific Optical Sensors Conference","volume":"31 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-07-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116728022","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Building a lab-in/on-fiber","authors":"Libo Yuan","doi":"10.1117/12.2184000","DOIUrl":"https://doi.org/10.1117/12.2184000","url":null,"abstract":"Recently the “lab-on-fiber” technology has been rapidly developed and demonstrated in several interdisciplinary application fields. It expressed as multifunctional photonic devices and components arising from the integration onto optical fibers of different materials at micro and nano-scale with suitable physical, chemical and biological properties. In this paper, a briefly introduction about the concept of “lab-in/on-fiber” has been given. Then, we concentrate to discuss in-fiber waveguides integration technology which provides an infrastructure for “lab-in/on-fiber”. Finally, we give several examples to show each unique experimental lab-in/on-fiber in different application fields and to demonstrate how it is possible to exploit the micro laboratories platforms.","PeriodicalId":183307,"journal":{"name":"Asia Pacific Optical Sensors Conference","volume":"8 2","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"120851931","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Temperature and strain dependence of the Brillouin frequencies in tapered optical fibers","authors":"K. H. Jeong, Sang Bae Lee, K. Song, Kwanil Lee","doi":"10.1117/12.2185261","DOIUrl":"https://doi.org/10.1117/12.2185261","url":null,"abstract":"We measured the Brillouin frequency in fiber taper and identified the shift of the Brillouin frequency when strain and temperature changed. As taper diameter decreases, strain coefficient for Brillouin frequency decreases down to 0.0488 MHz/με while temperature coefficient is maintained.","PeriodicalId":183307,"journal":{"name":"Asia Pacific Optical Sensors Conference","volume":"59 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130773672","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
D. Farnesi, S. Berneschi, G. Righini, G. Nunzi Conti, F. Quercioli, S. Soria
{"title":"Microbubble resonators as enhancement platforms for linear and nonlinear applications","authors":"D. Farnesi, S. Berneschi, G. Righini, G. Nunzi Conti, F. Quercioli, S. Soria","doi":"10.1117/12.2185830","DOIUrl":"https://doi.org/10.1117/12.2185830","url":null,"abstract":"We present linear and non linear optical applications of solid and hollow silica microresonators. Hollow microresonators or microbubble resonators combine the unique properties of whispering gallery mode resonators (WGMR) with the intrinsic capability of integrated microfluidics. Microbubbles were filled with water and aqueous solutions of ethanol in order to test the refractive index sensing capabilities of such resonators. We also tested the potential of microbubbles as nonlinear enhancement platform of both the filling material (Rhodamine 6G and Fluorescein) and the glass bubble.","PeriodicalId":183307,"journal":{"name":"Asia Pacific Optical Sensors Conference","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132338008","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Kyoungsoo Park, Young Suk Kim, Songhyun Jo, Y. Lee
{"title":"Polarimetric fiber vibration sensor based on polarization-diversity loop structure","authors":"Kyoungsoo Park, Young Suk Kim, Songhyun Jo, Y. Lee","doi":"10.1117/12.2184133","DOIUrl":"https://doi.org/10.1117/12.2184133","url":null,"abstract":"Here, we demonstrated a polarimetric fiber vibration sensor based on a polarization-diversity loop structure (PDLS) by using polarization-maintaining photonic crystal fiber (PM-PCF). The PDLS is composed of a polarization beam splitter, PM-PCF, and polarization controllers, forming a Sagnac birefringence interferometer (SBI) that has periodic interference spectra. When static strain is applied to PM-PCF used as a sensor head, spectral shift is observed in the output interference spectrum of the SBI of the sensor. If a monochromatic light source such as a laser diode is introduced into the SBI, the output optical power of the SBI is determined by its wavelength-dependent transmittance. If the wavelength of the light source is properly located at a spectral region where the transmittance of the SBI linearly varies, therefore, the magnitude of strain applied to PM-PCF can be found by observing the output voltage variation of a photodetector connected to the output port of the SBI. To investigate the vibration response of the proposed sensor with respect to various types of vibration, vibration diverse in the amplitude and frequency was applied to 8-cm-long PM-PCF by using a cylindrical piezoelectric transducer or a metal cantilever. First, vibration characteristics were examined for single frequency vibration in a range of 1−3000 Hz. Then, the sensor response to naturally damped vibration was explored. It was experimentally observed that the cut-off frequency was ~1900 Hz in the frequency response, and the peak value of the sensor output signal increased with the amount of impulse for naturally damped vibration.","PeriodicalId":183307,"journal":{"name":"Asia Pacific Optical Sensors Conference","volume":"54 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-07-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130925802","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A mode-division-multiplexing single fiber optical tweezers","authors":"Enming Zhao, Zhihai Liu, Yu Zhang, Yaxun Zhang, Jun Yang, Libo Yuan","doi":"10.1117/12.2183608","DOIUrl":"https://doi.org/10.1117/12.2183608","url":null,"abstract":"We propose and demonstrate a mode division multiplexing single fiber optical tweezers. By using this tweezers, one can trap a yeast cell and then launch it away from the fiber tip with a certain speed to a certain position without moving the optical fiber in a single fiber optical trapping apparatus. We excite both LP01 and LP11 mode beams in a same normal communication fiber core to generate the optical launching force and trapping force by molding the fiber tip into a special tapered-tip shape. A yeast cell of 6μm diameter is trapped and then being launched away. We construct the optical trapping and launching potential wells by controlling the power of two mode beams. This micro particle directional launching function expands new features of fiber optical tweezers based on the normal communication fiber, providing for the possibility of more practical applications in the biomedical research fields.","PeriodicalId":183307,"journal":{"name":"Asia Pacific Optical Sensors Conference","volume":"25 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115167024","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Dispersion characterization of group birefringence in polarization-maintaining fiber using a Kerr phase-interrogator","authors":"Yang Lu, C. Baker, X. Bao","doi":"10.1117/12.2185050","DOIUrl":"https://doi.org/10.1117/12.2185050","url":null,"abstract":"We present a new approach to characterize dispersion of group birefringence in a long polarization-maintaining fiber (PMF). Two sinusoidal optical signals are respectively launched into fast and slow axes of a PMF under test. Wavelength dependent group-delay difference between two sinusoidal optical signals induced by group birefringence in the PMF is measured using a Kerr phase-interrogator, and dispersion of group birefringence is characterized from the group-delay difference. Measurements of wavelength dependent group birefringence and group birefringence dispersion for a 459.4-m Panda PMF are experimentally demonstrated.","PeriodicalId":183307,"journal":{"name":"Asia Pacific Optical Sensors Conference","volume":"9 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2015-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124473204","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}