{"title":"The General Kinematic Pair of a Cam Mechanism","authors":"J. Ondrášek","doi":"10.5772/INTECHOPEN.86682","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.86682","url":null,"abstract":"At present, there are still increasing demands on the performance parameters of machinery equipment as well as cam mechanisms that belong to it. For this reason, the operating speeds and hence inertial effects of moving bodies, which limit the utilizable working frequency of machines, are increasing. These facts are the cause of higher wear and a decrease of the overall lifetime and reliability of machines. The force ratios in the general kinematic pair created by contact between the cam and the follower cause the contact stress. The generated stresses are transient and have a pulse shape. Fatigue damage of the cam working surface or the follower working surface may occur after exceeding a certain limit value of these stresses during the cam mechanisms running. This damage is in the form of cavities (pitting), which develop from cracks on the working surface. The chapter aim is to outline the issues of the dynamic stress of a general kinematic pair of a cam mechanism. One of the possible methods of the complex solution of the stress of the general kinematic pair is to use the possibilities of the finite element method in combination with the knowledge and conclusions of the contact mechanics.","PeriodicalId":174909,"journal":{"name":"Kinematics - Analysis and Applications","volume":"156 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127360512","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Optimization of Kinematics of Inclined Swinging Pin","authors":"S. Barton","doi":"10.5772/INTECHOPEN.86589","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.86589","url":null,"abstract":"The inclined swinging pin simply transforms the rotary motion into a rotational oscillation. It consists of three components, a rotating inclined tenon, a crossbeam, and a stirrup. The pitch angle of the inclined tenon relative to the x -axis of its rotation is decisive for the kinematics of this joint. Too small inclination angle will result in small amplitude of oscillation; too much inclination will lead to an impulse dynamic stress that can damage the pin. The optimal angle of inclination can be determined from the mathematical model, created in the Maple environment, which uses linear algebra resources to describe the behavior of the joint. Vectors of coordinates of the critical points are created for each joint component. Further-more, transformation matrices are created which describe the behavior of the corresponding kinematic chain in relation to the inclination angle of the inclined tenon and time.","PeriodicalId":174909,"journal":{"name":"Kinematics - Analysis and Applications","volume":"103 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-06-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117313999","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
I. M. Fonseca, Maurício N. Pontuschka, Glaydson Luiz Bertoze Lima
{"title":"Kinematics for Spacecraft-Type Robotic Manipulators","authors":"I. M. Fonseca, Maurício N. Pontuschka, Glaydson Luiz Bertoze Lima","doi":"10.5772/INTECHOPEN.85636","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.85636","url":null,"abstract":"The scope of this chapter is the study of the forward and inverse kinematics for a space robot. The main focus is to compute the position and orientation of manipulators’ end-effectors relative to their platform. Such platform plays the role of workstations referred in the literature approaching ground manipulators. In this study, the method is to write the manipulator kinematics’ equations as functions of the joint variables by following the Denavit-Hartenberg convention. The homogeneous transform technique is used to study the kinematics. The set of coordinate frames defined in this chapter follows the convention for frames that appears in the literature for ground robot manipulators. The kinematics related to the spacecraft attitude is added in the formulation because the manipulator studied in this chapter is type spacecraft. The objective is to provide an overview and clear understanding of the kinematics’ equations for spacecraft-type manipulators. To be consistent with orbital dynamics area, the inertial, orbital, and body-fixed coordinate frames are included in this kinematics study. The forward and inverse kinematics formulations are derived. The MATLAB/Simulink tools are presented for the computer simulations of the forward and inverse kinematics.","PeriodicalId":174909,"journal":{"name":"Kinematics - Analysis and Applications","volume":"12 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-05-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115377510","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Kinematic Absolute Positioning with Quad-Constellation GNSS","authors":"L. Pan, C. Cai, Jianjun Zhu, Xianqiang Cui","doi":"10.5772/INTECHOPEN.86368","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.86368","url":null,"abstract":"The absolute positioning technique is based on a point positioning mode with a single Global Navigation Satellite System (GNSS) receiver, which has been widely used in many fields such as vehicle navigation and kinematic surveying. For a long period, this positioning technique mainly relies on a single GPS system. With the revitalization of Global Navigation Satellite System (GLONASS) constellation and two newly emerging constellations of BeiDou Navigation Satellite System (BDS) and Galileo, it is now feasible to carry out the absolute positioning with quad-constellation of GPS, GLONASS, BDS, and Galileo. A combination of multi-constellation observations can offer improved reliability, availability, and accuracy for position solutions. In this chapter, combined GPS/GLONASS/BDS/Galileo point positioning models for both traditional single point positioning (SPP) and precise point positioning (PPP) are presented, including their functional and stochastic components. The traditional SPP technique has a positioning accuracy at a meter level, whereas the PPP technique can reach an accuracy of a centimeter level. However, the later relies on the availability of precise ephemeris and needs a long convergence time. Experiments were carried out to assess the kinematic positioning performance in the two different modes. The positioning results are compared among different constellation combinations to demonstrate the advantages of quad-constellation GNSS.","PeriodicalId":174909,"journal":{"name":"Kinematics - Analysis and Applications","volume":"18 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-05-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125046386","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Modeling and Design of Flexure Hinge-Based Compliant Mechanisms","authors":"S. Linß, S. Henning, L. Zentner","doi":"10.5772/INTECHOPEN.85224","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.85224","url":null,"abstract":"A compliant mechanism gains its mobility fully or partially from the compliance of its elastically deformable parts rather than from conventional joints. Due to many advantages, in particular the smooth and repeatable motion, monolithic mechanisms with notch flexure hinges are state of the art in numerous precision engineering applications with required positioning accuracies in the low micrometer range. However, the deformation and especially motion behavior are complex and depend on the notch geometry. This complicates both the accurate modeling and purposeful design. Therefore, the chapter provides a survey of different methods for the general and simplified modeling of the elasto-kinematic properties of flexure hinges and compliant mechanisms for four hinge contours. Based on non-linear analytical calculations and FEM simulations, several guidelines like design graphs, design equations, design tools or a geometric scaling approach are presented. The obtained results are analytically and simulatively verified and show a good correlation. Using the example of a path-generating mechanism, it will be demonstrated that the suggested angle-based method for synthesizing a compliant mechanism with individually shaped hinges can be used to design high-precise and large-stroke compliant mechanisms. The approaches can be used for the accelerated synthesis of planar and spatial flexure hinge-based compliant mechanisms.","PeriodicalId":174909,"journal":{"name":"Kinematics - Analysis and Applications","volume":"5 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-04-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126368280","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Kinetostatic Nonlinear Stiffness Characteristic Generation Using the Kinematic Singularity of Planar Linkages","authors":"Baokun Li, Guangbo Hao","doi":"10.5772/INTECHOPEN.85009","DOIUrl":"https://doi.org/10.5772/INTECHOPEN.85009","url":null,"abstract":"The theory of nonlinear stiffness characteristic by employing the kinematic limb-singularity of planar mechanisms with attached springs is proposed. After constructing the position formula with closed-loop form of the mechanism, the kinematic limb-singularity can be identified. The kinetostatic model can be obtained based on the principle of virtual work. The influences of spring stiffness on the force-displacement or torque-angle curve are analysed. Different spring stiffness results in one of four types of stiffness characteristic, which can be used to design an expected stiffness characteristic. After replacing corresponding joints with flexures, the pseudo-rigid-body model of the linkage with springs is obtained. The compliant mechanisms with nonlinear stiffness characteristic can further be synthesised based on the pseudo-rigid-body model.","PeriodicalId":174909,"journal":{"name":"Kinematics - Analysis and Applications","volume":"291 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2019-03-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116305789","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
京公网安备 11010802042870号
求助内容：
应助结果提醒方式：