{"title":"A MATLAB Model of the Second Generation Switched Current Memory Cell","authors":"M. Pavlík, J. Haze, R. Vrba","doi":"10.1109/CENICS.2009.27","DOIUrl":"https://doi.org/10.1109/CENICS.2009.27","url":null,"abstract":"The paper deals with the design of the second generation memory cell MATLAB model. There are described errors of the second generation switched current (SI) memory cell and impact of the SI technique on the transfer function of the memory cell, too. Since, the errors depend on fabrication technology, design of the memory cell proceed using AMIS CMOS 0.7 μm technology. The CADENCE software was used to simulations. Consequently, the differences compared with ideal transfer function were described and sources of the errors were expressed. On the basis of the error expressions the model of the real switched current memory cell was proposed. Results and comparison of the CADENCE simulation are presented as well.","PeriodicalId":164012,"journal":{"name":"2009 Second International Conference on Advances in Circuits, Electronics and Micro-electronics","volume":"54 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-10-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123681603","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"QCA Implementation of A5/1 Stream Cipher","authors":"M. Amiri, Mojdeh Mahdavi, S. Mirzakuchaki","doi":"10.1109/CENICS.2009.17","DOIUrl":"https://doi.org/10.1109/CENICS.2009.17","url":null,"abstract":"Quantum Cellular Automata (QCA) represents an emerging technology at the nanotechnology level. Nowadays, many applications of QCA technology are introduced and cryptography can be an interesting application of QCA technology. The original encryption algorithm for GSM was A5/1. Here, we have implemented the A5/1 stream cipher using QCA technology. Simulation results are obtained from QCADesigner software.","PeriodicalId":164012,"journal":{"name":"2009 Second International Conference on Advances in Circuits, Electronics and Micro-electronics","volume":"60 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-10-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132519207","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Trajectory and Inclination Calculation of Cone Penetration Probe","authors":"V. Cepulis, V. Markevičius, D. Navikas","doi":"10.1109/CENICS.2009.28","DOIUrl":"https://doi.org/10.1109/CENICS.2009.28","url":null,"abstract":"Abstract – Cone penetration testing (CPT) is a fast and reliable means for exploring soils and soft ground (to 40 m depth) for support of buildings, retaining walls, pavement subgrades, and bridge foundations. A cone can deviate from verticality due to misalignment, a bent push rods, soil layering, or by being pushed off a vertical course during penetration if it encounters an obstacle such as a large rock. Deviation reduces probing accuracy, or large deviation from the initial alignment can cause breakage of the cone rods and loss of the cone down the hole. The inclination and trajectory calculation techniques of cone penetration test (CPT) probe are presented. Two-dimensional inclinometer was used on purpose to calculate probe trajectory and (if needed) to generate an alarm signal to avoid breakage of the cone rods.","PeriodicalId":164012,"journal":{"name":"2009 Second International Conference on Advances in Circuits, Electronics and Micro-electronics","volume":"35 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-10-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116217806","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Universal Resistance-to-Digital Converter","authors":"S. Yurish","doi":"10.1109/CENICS.2009.13","DOIUrl":"https://doi.org/10.1109/CENICS.2009.13","url":null,"abstract":"A universal resistance-to-digital converter based on the Universal Sensors and Transducers Interfacing integrated circuit (USTI) investigated and described at the first time. A three-point calibration technique for accurate resistance measurements in a wide resistive range has been implemented in a single integrated circuit that allows a direct resistance-to-digital conversion according to three popular serial interfaces RS232, SPI and I2C. At a minimum possible hardware configuration, the integrated circuit lets obtain the average relative error ± 0.47 % in the wide measuring range from 10 Ohm to 10 MOhm, and ± 0.01 % relative error at conditional splitting of the range of measurement into sub ranges with a choice of appropriate values of the reference resistor and charging-discharging capacitor. In addition, the designed integrated circuit can work with any resistance-to-time or resistance-to-frequency conditioning circuits and is suitable practically for any resistive sensors and transducers. In such cases, their outputs should be directly connected to any of two USTI’s channels for frequency-time measurements. The designed integrated circuit also has several addition advantages such as low cost, universality, small size (32-pad MLF 5x5x1 mm package) and high reliability.","PeriodicalId":164012,"journal":{"name":"2009 Second International Conference on Advances in Circuits, Electronics and Micro-electronics","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-10-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115645005","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
S.S. Ghoreishi, M. Pourmina, H. Bozorgi, M. Dousti
{"title":"High Speed RSA Implementation Based on Modified Booth's Technique and Montgomery's Multiplication for FPGA Platform","authors":"S.S. Ghoreishi, M. Pourmina, H. Bozorgi, M. Dousti","doi":"10.1109/CENICS.2009.25","DOIUrl":"https://doi.org/10.1109/CENICS.2009.25","url":null,"abstract":"Rivest, Shamir and Adleman (RSA) encryption algorithm is one of the most widely used and popular public- key cryptosystem. The main step in this algorithm is modular exponentiation which can be done by a sequence of modular multiplication. Thus, modular multiplication is the major factor, in many cryptosystems, e.g. the RSA Two-Key system and in the proposed digital signature standard DSS. One of the most efficient algorithms of modular multiplication is the Montgomery multiplication. In this paper, modified radix-4 modular multiplication was developed based on Booth’s multiplication technique. We use CSA (Carry Save Adder) to avoid carry propagation. Also a very fast algorithm was presented and used for computing the modular reduction. We proposed new hardware architecture for optimum implementation of this algorithm. According to our design, for encrypting an n-bit plaintext, we need to about 3/4n (n + 11) clock cycles. We used Xilinx VirtexII and XC4000 series FPGAs (Field Programmable Gate Array). As a result, it is shown that the processor can perform 1024-bit RSA operation in less than 15ms and 50ms at 54.6MHz and 16.1MHz on Xilinx VirtexII and XC4000 series FPGA, respectively. Finally we compared our results with the previous works. We can say that a significant improvement was achieved in terms of time and in terms of used time-area (TA) our work is good.","PeriodicalId":164012,"journal":{"name":"2009 Second International Conference on Advances in Circuits, Electronics and Micro-electronics","volume":"19 ","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-10-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114006934","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Temperature Compensation of Cone Penetration Probe Sensors","authors":"V. Cepulis, V. Markevičius, D. Navikas","doi":"10.1109/CENICS.2009.15","DOIUrl":"https://doi.org/10.1109/CENICS.2009.15","url":null,"abstract":"Here is presented a temperature compensation technique of cone penetration probe sensors (CPT). Probe internal temperature influence to accuracy of ADC and sensors bridge output voltage was investigated. There are presented theoretical results of bridge calibration and strain measure errors.","PeriodicalId":164012,"journal":{"name":"2009 Second International Conference on Advances in Circuits, Electronics and Micro-electronics","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-10-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133790093","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A Simple 250 Degrees Celsius Frequency Modulation Transmitter for use in Wireless Sensor Networks","authors":"J. Gagnon, F. Gagnon, Olivier Munger","doi":"10.1109/CENICS.2009.22","DOIUrl":"https://doi.org/10.1109/CENICS.2009.22","url":null,"abstract":"This paper presents a voltage-controlled oscillator (VCO) operating up to 250°C and usable as a simple frequency modulation (FM) transmitter in wireless sensor networks (WSN). The device is a simple LC oscillator which uses the channel depletion capacitance as a variable capacitor controlled by the gate voltage VG to enable the sustained oscillating behaviour of a tank circuit. The context of operation, failure mechanisms and limitations of electronic components in high temperature environments are studied. The designed component operates successfully in the frequency range from 48 to 62 MHz at room temperature and 56 to 59 MHz at 250°C. Output powers have been measured from -30 dBm to -10 dBm. The proposed circuit enables frequency modulation for wireless communications in the context of ruggedized wireless sensor networks, that is, sensor networks which are designed to operate in very harsh conditions such as fire fighting and industrial applications.","PeriodicalId":164012,"journal":{"name":"2009 Second International Conference on Advances in Circuits, Electronics and Micro-electronics","volume":"75 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-10-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116416337","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
K. Tomasena, J. F. Sevillano, J. Pérez, A. Cortes, I. Vélez
{"title":"A Transaction Level Assertion Verification Framework in SystemC: An Application Study","authors":"K. Tomasena, J. F. Sevillano, J. Pérez, A. Cortes, I. Vélez","doi":"10.1109/CENICS.2009.24","DOIUrl":"https://doi.org/10.1109/CENICS.2009.24","url":null,"abstract":"This paper presents a new transaction level assertion verification framework built on top of SystemC to support the integration of Assertion Based Verification in a Model Driven Design methodology. A key point of the proposed framework is that it enables decoupling the work of the design and verification teams. This is possible thanks to data introspection capabilities; the fact that the assertions are not embedded in the design model code; and the abstraction in the property specification. Thus, the two teams can work in parallel starting from the natural language specification, reducing the development time.","PeriodicalId":164012,"journal":{"name":"2009 Second International Conference on Advances in Circuits, Electronics and Micro-electronics","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-10-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128682365","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A 2-D KLM Model for Disk-Shape Piezoelectric Transducers","authors":"J. Gallière, L. Latorre, P. Papet","doi":"10.1109/CENICS.2009.12","DOIUrl":"https://doi.org/10.1109/CENICS.2009.12","url":null,"abstract":"Piezoelectric materials are widely used for many applications such as sensors, actuators. Today, their integration in microelectronics processes like CMOS requires the development of advanced realistic behavioral models. Until now, these models were limited to only one ceramic's operation mode, i.e., thickness or planar. Moreover, the robustness of piezo-electronic systems cannot be adequately addressed as long as models are not improved in particular by taking into account further real phenomena. This article proposes to merge, in a new KLM model, the two operation modes. It is demonstrated that the behavior of the proposed model is in very good agreement with the real ceramic behavior.","PeriodicalId":164012,"journal":{"name":"2009 Second International Conference on Advances in Circuits, Electronics and Micro-electronics","volume":"14 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-10-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"134481432","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Parking Traffic Jam Forecast System","authors":"A. Marma, M. Zilys, A. Valinevicius","doi":"10.1109/CENICS.2009.30","DOIUrl":"https://doi.org/10.1109/CENICS.2009.30","url":null,"abstract":"Application-oriented electronics methods for detection of parking traffic jams simplify the control systems and increase the efficiency. This paper explores the possibility of traffic jam forecast. Main target of this paper is to show possibility to forecast traffic jam before it starts and not only detect it. This paper proposes jam forecasting and detection technology using set of traffic flow data. In this method, time series data of traffic flow events considered as a combination of frequency are transformed into several frequency data. Experimental researches were done in real parking lot in Kaunas. Created methods and structures of electronic flow control systems increase efficiency of traffic flow control systems in the places of mass gatherings.","PeriodicalId":164012,"journal":{"name":"2009 Second International Conference on Advances in Circuits, Electronics and Micro-electronics","volume":"31 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2009-10-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133839201","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}