ASME 2021 Gas Turbine India Conference最新文献

筛选
英文 中文
Effect of Rotor Tip Casing Treatment on the Performance and Stability of a Transonic Axial Compressor 转子叶尖机匣处理对跨音速轴流压气机性能和稳定性的影响
ASME 2021 Gas Turbine India Conference Pub Date : 2021-12-02 DOI: 10.1115/gtindia2021-75882
Subbaramu Shivaramaiah, Mahesh K. Varpe, Mohammed Afzal
{"title":"Effect of Rotor Tip Casing Treatment on the Performance and Stability of a Transonic Axial Compressor","authors":"Subbaramu Shivaramaiah, Mahesh K. Varpe, Mohammed Afzal","doi":"10.1115/gtindia2021-75882","DOIUrl":"https://doi.org/10.1115/gtindia2021-75882","url":null,"abstract":"\u0000 In a transonic compressor rotor, tip leakage flow interacts with passage shock, casing boundary layer and secondary flow. This leads to increase in total pressure loss and reduction of compressor stability margin. Casing treatment is one of the passive endwall geometry modification technique to control tip leakage flow interaction. In the present investigation effect of rotor tip casing treatment is investigated on performance and stability of a NASA 37 transonic compressor stage. Existing literature reveals, that endwall casing treatment slots i.e., porous casing treatment, axial slots axially skewed slots, circumferential grooves, recirculating casing treatment etc. are able to improve compressor stability margin with penalty on stage efficiency. Turbomachinery engineers and scientists are still focusing their research work to identify an endwall casing treatment configuration with improves both compressor stall margin as well as stage efficiency. Hence in the current work, as an innovative idea, effect of casing treatment slot along rotor tip mean camber line is investigated on NASA 37 compressor stage. Casing treatment slot with rectangular cross-section was created along the rotor tip mean camber line. Four different casing treatment configurations were created by changing number of slots on rotor casing surface. In all four configurations casing treatment slot width and height remains same. Flow simulation of NASA 37 compressor stage was performed with all these four casing treatment configurations. A maximum stall margin improvement of 3% was achieved with a particular slot configuration, but without any increase in compressor stage efficiency.","PeriodicalId":154693,"journal":{"name":"ASME 2021 Gas Turbine India Conference","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122717477","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Natural Frequency and Resonance Study of FGM Turbo-Machinery Blade Using Campbell Diagram 利用Campbell图研究FGM涡轮机械叶片的固有频率和共振
ASME 2021 Gas Turbine India Conference Pub Date : 2021-12-02 DOI: 10.1115/gtindia2021-76440
A. Das, Sridip Pal, Su Ziyi, Mrutyunjay Rout, K. Inaba, A. Karmakar
{"title":"Natural Frequency and Resonance Study of FGM Turbo-Machinery Blade Using Campbell Diagram","authors":"A. Das, Sridip Pal, Su Ziyi, Mrutyunjay Rout, K. Inaba, A. Karmakar","doi":"10.1115/gtindia2021-76440","DOIUrl":"https://doi.org/10.1115/gtindia2021-76440","url":null,"abstract":"\u0000 Turbo machinery rotating blades are a vital component of aero-engines for transferring the energy of gas flow to kinetic energy. Rotating turbo-machinery blades are prone to fail under working fields with high temperature, high speed, high pressure and resonance of blades with prime engine. Vibration of the turbo-machinery blades need to be studied carefully for safe and reliable operation of the engine. Thermal barrier coatings (TBC) layers are used to protect the blade metal at higher operating temperature though these can be plagued due to phase instability, thermal instability and adherence problems. TBCs also tend to spall due to thermal expansion mismatch with the super alloy substrate or because of erosion/impact caused by particles in the high-velocity combustion gases. Functionally graded materials (FGMs) are a relatively new class of materials that can solve these problems in high-temperature environments and can be considered as potential material for making gas turbine blades. Unlike composite materials the functionally graded materials (FGMs) are free from delamination and debonding and have the ability to withstand high temperature without TBC coatings. In this present study natural frequency of the FGM turbine blade for various rotational speeds during actual operation is determined using finite element technique. As the aero-engine is complex in nature therefore harmonic resonance can always occur in the aero-engine system and it is difficult to determine the natural frequency at varying speed during actual operation. The chances of failure of the blade also increase because of harmonic resonance. Hence, the resonance property is required to investigate of the FGM blade in details. Various rotational speed and operating temperature is considered to determine the natural frequencies of the blade. The resonance studies for each case are performed using the Campbell diagram. Resonance margin is calculated for each case and safe operating speed is determined. This study could serve as ready reference for safe operation of turbo-machinery engine considering FGM blade for specific range of engine speed.","PeriodicalId":154693,"journal":{"name":"ASME 2021 Gas Turbine India Conference","volume":"65 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127126012","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Coupled Thermal-Structural Analysis of Generator For sCO2 Turbomachinery sCO2汽轮机发电机热-结构耦合分析
ASME 2021 Gas Turbine India Conference Pub Date : 2021-12-02 DOI: 10.1115/gtindia2021-76451
Ramesha Guntanur, Ashutosh Patel, Vijayalaxmi Biradar, Pramod Kumar
{"title":"Coupled Thermal-Structural Analysis of Generator For sCO2 Turbomachinery","authors":"Ramesha Guntanur, Ashutosh Patel, Vijayalaxmi Biradar, Pramod Kumar","doi":"10.1115/gtindia2021-76451","DOIUrl":"https://doi.org/10.1115/gtindia2021-76451","url":null,"abstract":"\u0000 This paper presents the coupled thermal and structural analysis of the rotating components of the generator using ABAQUS finite element solver. The interference between shaft and rotor is optimized to have a positive contact pressure and also minimize the stresses in the laminate at all operating speeds. Thermal analysis is performed to simulate the temperature distribution arising from the heat losses of generator. The flow path of the coolant is designed through the shaft to minimise the temperature rise of the generator. The resulting changes in the contact pressure between laminated disc and shaft is computed using sequentially coupled thermal and structural analysis. The thermal stresses of rotor are computed estimated and the design is optimized for transmitting torque at different operating speeds.","PeriodicalId":154693,"journal":{"name":"ASME 2021 Gas Turbine India Conference","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129019398","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Development of a New Loss Model for Turbomachinery Labyrinth Seals 叶轮机械迷宫密封损失新模型的建立
ASME 2021 Gas Turbine India Conference Pub Date : 2021-12-02 DOI: 10.1115/gtindia2021-76061
D. Kulkarni, L. di Mare
{"title":"Development of a New Loss Model for Turbomachinery Labyrinth Seals","authors":"D. Kulkarni, L. di Mare","doi":"10.1115/gtindia2021-76061","DOIUrl":"https://doi.org/10.1115/gtindia2021-76061","url":null,"abstract":"\u0000 The preliminary design of labyrinth seals requires a fast and accurate estimate of the leakage flow. While the conventional bulk flow models can quickly predict labyrinth seal discharge characteristics, they lack the accuracy and pragmatism of modern CFD technique and vice-a-versa. This paper presents a new 1D loss model for straight-through gas labyrinth seals that can provide quick seal leakage flow predictions with CFD-equivalent accuracy.\u0000 The present seal loss model is developed using numerical experimentation technique. Multiple CFD computations are conducted on straight-through labyrinth seal geometries for a range of pressure ratios. A distinct post-processing methodology is developed to extract the through-flow stream tube in seal. Total pressure losses and flow area variations experienced by the flow in seal stream-tube are systematically accounted for based on the well-known knife-to-knife (K2K) methodology. Regression analyses are conducted on the trends of variations of loss and area coefficients to derive the independent pressure loss and flow area correlations.\u0000 These novel correlations can predict the bulk leakage flow rate, windage flow rate and inter-knife static pressures over a wide range of variation of flow and geometry parameters. Validation study shows that the leakage mass flow rate predicted by this model is accurate within ±8% of measured test data. This fast and accurate model can be employed for various applications such as, in seal design-analysis workflows, for secondary air system (SAS) performance analysis and for the rotor-dynamic and aeroelastic assessments of seals.","PeriodicalId":154693,"journal":{"name":"ASME 2021 Gas Turbine India Conference","volume":"71 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115970377","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
Microstructural Evolution Of LPBF AlSiMg – Effect Of Water Quenching Vs Furnace Cooling Vs Direct Aging LPBF AlSiMg的组织演变——水淬、炉冷、直接时效的影响
ASME 2021 Gas Turbine India Conference Pub Date : 2021-12-02 DOI: 10.1115/gtindia2021-75837
D. Srinivasan, Dayananda Narayana
{"title":"Microstructural Evolution Of LPBF AlSiMg – Effect Of Water Quenching Vs Furnace Cooling Vs Direct Aging","authors":"D. Srinivasan, Dayananda Narayana","doi":"10.1115/gtindia2021-75837","DOIUrl":"https://doi.org/10.1115/gtindia2021-75837","url":null,"abstract":"\u0000 The heat treatment response of AlSi10Mg via laser powder bed fusion (LPBF) has been studied via detailed microstructural characterization. The effect of solutioning (S) and water quenching (WQ) vs furnace cooling (FC), and direct aging (DA) vs solutioning and aging (SA), has been analysed, for microstructure and tensile properties. 11 heat treatments were carried out to map the partitioning of Si, starting with stress relieving at 200 °C vs 300 °C, followed by solution heat treatment at 430°C vs 530 °C, water quenching vs furnace cooling, aging at 160 °C vs direct aging at 160 °C, to establish the microstructure of LPBF AlSi10Mg alloys for potential applications. The microstructure at 430 °C and 530 °C shows Si precipitate fractions of 25% and 14%, respectively. Room temperature mechanical properties, revealed the 300 °C, 2 h stress relieved sample with the highest strength and ductility (YS of 230 MPa and 16%). At 430 °C, both water quenching and furnace cooling showed similar strengths and 16% elongation, while at 530 °C, there was a much lower elongation (8–9%) with the T6 (53 °C, WQ, SA) showing higher strength and elongation. This study brings out the importance of being able to choose the heat treatments suitable to AlSiMg part geometry, via LPBF additive manufacturing for various applications.","PeriodicalId":154693,"journal":{"name":"ASME 2021 Gas Turbine India Conference","volume":"86 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116800590","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 1
A Numerical Study of Flow Around Different Hydrofoil Systems In Presence of the Free Surface 存在自由表面时不同水翼系统绕流的数值研究
ASME 2021 Gas Turbine India Conference Pub Date : 2021-12-02 DOI: 10.1115/gtindia2021-75821
N. Kumari, A. Chakraborty
{"title":"A Numerical Study of Flow Around Different Hydrofoil Systems In Presence of the Free Surface","authors":"N. Kumari, A. Chakraborty","doi":"10.1115/gtindia2021-75821","DOIUrl":"https://doi.org/10.1115/gtindia2021-75821","url":null,"abstract":"\u0000 The hydrofoils are essential element in tidal current turbine and in high speed marine crafts. Hence, the study of hydrodynamic characteristics of hydrofoils are important as they play a vital role in improving the performance of these propulsion devices (hydro-kinetic turbine, marine craft). In the present study, the dynamics of unsteady and viscous flow around a two hydrofoil system is investigated for two different configuration: (a) tandem, and in (b) stagger arrangement. The incompressible Navier-Stokes equations were solved using Finite Volume Solver in STAR-CCM+ commercial software package. k-ε turbulence model is incorporated in the present simulation in order to explain the turbulence flow physics while the free surface is captured using Volume of Fluid (VOF) technique. Further, the obtained numerical simulation results were compared with experimental data available in the literature as a validation purpose. The objective of the present study is to investigate the effects of spacing distance on the lift and drag coefficient generated by two foil system in tandem and stagger arrangements which is one of the important design parameter for a tidal turbine blades in presence of free sea surface. It could be observed that the hydrofoils are arranged in tandem configuration, the lift coefficients of the upstream and downstream hydrofoils are higher in comparison to single hydrofoil. Interference effect didn’t die out even at large spacing for 2-D hydrofoil.","PeriodicalId":154693,"journal":{"name":"ASME 2021 Gas Turbine India Conference","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126640769","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 3
A Study on Low Velocity Impact Behaviour of Functionally Graded Sandwich Conical Shell Under Thermal Environment 热环境下功能梯度夹层锥形壳低速冲击特性研究
ASME 2021 Gas Turbine India Conference Pub Date : 2021-12-02 DOI: 10.1115/gtindia2021-73468
A. Das, Sridip Pal, Gopal Agarwal, K. Inaba, Tripuresh Deb Singha, A. Karmakar
{"title":"A Study on Low Velocity Impact Behaviour of Functionally Graded Sandwich Conical Shell Under Thermal Environment","authors":"A. Das, Sridip Pal, Gopal Agarwal, K. Inaba, Tripuresh Deb Singha, A. Karmakar","doi":"10.1115/gtindia2021-73468","DOIUrl":"https://doi.org/10.1115/gtindia2021-73468","url":null,"abstract":"\u0000 Turbo machinery rotating blades are a vital component of aero-engines for transferring the energy of gas flow to kinetic energy. Rotating turbo-machinery blades are prone to fail under working field with high temperature, high speed, high pressure and impact of blades. Recently Functionally graded materials (FGMs) are used in turbo-machinery blades due to its advantage of delamination and debonding free structure and ability to withstand high temperature during operation. As these aero-engine blade works in high temperature condition therefore use of ceramic FGM in the outer surface of the blades gives potential advantage. However, low velocity impact is a potential hazard of the blade due to rigid structure of the blade while considerable thickness of ceramic present in the outer surface of the blade. The chances of impact failure of the blade also increase in that case. Hence, low velocity impact of the turbo-machinery blades need to study carefully for safe and reliable operation of the engine. In this present work the low velocity impact characteristics of the FGM sandwich turbine blade under various operating temperature are determined using finite element technique. The low velocity impact performances are evaluated in terms of time histories of the contact force, velocity of the projectile, shell deflection and indentation considering various impactor initial velocities, core to FGM thickness ratio (hcore/hfgm) and blade operating temperature. The upper and lower surfaces of the functionally graded structure reinforced by ductile pure metal layers appear to play a significant role in protecting the structure’s functional integrity from damage.","PeriodicalId":154693,"journal":{"name":"ASME 2021 Gas Turbine India Conference","volume":"22 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122023700","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Life Augmentation of Turbine Exhaust System Compensators Through Integrated MADM Optimization Approach of Stress Based Fatigue Cycles 基于应力疲劳循环集成MADM优化方法的涡轮排气系统补偿器寿命延长
ASME 2021 Gas Turbine India Conference Pub Date : 2021-12-02 DOI: 10.1115/gtindia2021-76690
N. Pagar, A. Patil
{"title":"Life Augmentation of Turbine Exhaust System Compensators Through Integrated MADM Optimization Approach of Stress Based Fatigue Cycles","authors":"N. Pagar, A. Patil","doi":"10.1115/gtindia2021-76690","DOIUrl":"https://doi.org/10.1115/gtindia2021-76690","url":null,"abstract":"\u0000 Exhaust expansion joints, also known as compensators, are found in a variety of applications such as gas turbine exhaust pipes, generators, marine propulsion systems, OEM engines, power units, and auxiliary equipment. The motion compensators employed must have accomplished the maximum expansion-contraction cycle life while imposing the least amount of stress. Discrepancies in the selecting of bellows expansion joint design parameters are corrected by evaluating stress-based fatigue life, which is challenging owing to the complicated form of convolutions. Meridional and circumferential convolution stress equations that influencing fatigue cycles are evaluated and verified with FEA. Fractional factorial Taguchi L25 matrix is used for finding the optimal configurations. The discrete design parameters for the selection of the suitable configuration of the compensators are analysed with the help of the MADM decision making techniques. The multi-response optimization methods GRA, AHP, and TOPSIS are used to determine the parametric selection on a priority basis. It is seen that weighing distribution among the responses plays an important role in these methods and GRA method integrated with principal components shows best optimal configurations. Multiple regression technique applied to these methods also shows that PCA-GRA gives better alternate solutions for the designer unlike the AHP and TOPSIS method. However, higher ranked Taguchi run obtained in these methods may enhance the suitable selection of different design configurations. Obtained PCA-GRG values by Taguchi, Regression and DOE are well matched and verified for the all alternate solutions. Further, it also shows that stress based fatigue cycles obtained in this analysis for the L25 run indicates the range varying from 1.13 × 104 cycles to 9.08 × 105 cycles, which is within 106 cycles. This work will assist the design engineer for selecting the discrete parameters of stiff compensators utilized in power plant thermal appliances.","PeriodicalId":154693,"journal":{"name":"ASME 2021 Gas Turbine India Conference","volume":"44 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"121617550","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Effect of Solidity on Performance of Vertical Axis Wind Turbine Using Constant Chord Reynolds Number 定弦雷诺数下固度对垂直轴风力机性能的影响
ASME 2021 Gas Turbine India Conference Pub Date : 2021-12-02 DOI: 10.1115/gtindia2021-75993
A. P., R. K. Velamati, Srinath K S, U. D.
{"title":"Effect of Solidity on Performance of Vertical Axis Wind Turbine Using Constant Chord Reynolds Number","authors":"A. P., R. K. Velamati, Srinath K S, U. D.","doi":"10.1115/gtindia2021-75993","DOIUrl":"https://doi.org/10.1115/gtindia2021-75993","url":null,"abstract":"\u0000 The demand for wind turbines has increased ever since fossil fuels showed signs of quick depletion. Among wind turbines, Vertical Axis Wind Turbine (VAWT) is compact, produces less noise, is omnidirectional, resilient to turbulent flow, and is easy to maintain. The power generated by a VAWT is a function of a non-dimensional geometric parameter known as solidity (s), which is a function of turbine diameter (D), blade chord (c) and the number of blades (n). The present work analyses the impact of solidity (0.12 and 0.18) as a complete non-dimensional parameter on wind turbine performance. Each parameter of solidity is varied, keeping any one of the parameters constant and numerically studied for its performance across a range of tip speed ratios (TSR). For each solidity, six different combinations of VAWT geometric parameters were analyzed. In all the cases, the chord Reynolds number is kept constant. CFD simulation was performed on the Darrieus H-type (NACA0018 airfoil) VAWT. Two dimensional (2D) computational domains are used to study the effect on the turbine’s performance as the solidity studied is less than 0.4. Unsteady Reynolds-Averaged Navier-strokes (URANS) equation is used to solve the CFD model using ANSYS Fluent 19.1 with 4-equation transition SST k-ω for turbulence modelling. The comprehensive study of the turbine performance keeping the turbine operation within a constant Re number range shows the Coefficient of Performance (Cp) overlaps for a given solidity.","PeriodicalId":154693,"journal":{"name":"ASME 2021 Gas Turbine India Conference","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130486260","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
Impact of Uniform Surface Roughness on the Aerodynamic Performance of an Axial Compressor Rotor at Different Rotational Speeds 不同转速下均匀表面粗糙度对轴流压气机转子气动性能的影响
ASME 2021 Gas Turbine India Conference Pub Date : 2021-12-02 DOI: 10.1115/gtindia2021-75987
Ashima Malhotra, Shraman Goswami, Pradeep A M
{"title":"Impact of Uniform Surface Roughness on the Aerodynamic Performance of an Axial Compressor Rotor at Different Rotational Speeds","authors":"Ashima Malhotra, Shraman Goswami, Pradeep A M","doi":"10.1115/gtindia2021-75987","DOIUrl":"https://doi.org/10.1115/gtindia2021-75987","url":null,"abstract":"\u0000 The aerodynamic performance of a compressor rotor is known to deteriorate due to surface roughness. It is important to understand this deterioration as it impacts the overall performance of the engine. This paper, therefore, aims to numerically investigate the impact of roughness on the performance of an axial compressor rotor at different rotational speeds. In this numerical study, the simulations are carried out for NASA Rotor37 at 100%, 80%, and 60% of its design speed. with and without roughness on the blade surface. These speeds are chosen because they represent different flow regimes. The front stages of a multistage compressor usually have a supersonic or transonic regime whereas the middle and aft stages have a subsonic regime. Thus, these performance characteristics can give an estimate of the impact on the performance of a multistage compressor. At 100% speed (design speed), the relative flow is supersonic, at 80% of design speed, the relative flow is transonic and at 60% of design speed, the relative flow is subsonic. Detailed flow field investigations are carried out to understand the underlying flow physics. The results indicate that, for the same amount of roughness, the degradation in the performance is maximum at 100% speed where the rotor is supersonic, while the impact is minimum at 60% speed where the rotor is subsonic. Thus, the rotor shock system plays an important role in determining the performance loss due to roughness. It is also observed that the loss increases with increased span for 100% and 80% speeds, but for 60% speed, the loss is almost constant from the hub to the shroud. This is because, with the increased span, the shock strength increases for 100% and 80% speeds, whereas at 60% speed flow is subsonic.","PeriodicalId":154693,"journal":{"name":"ASME 2021 Gas Turbine India Conference","volume":"31 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-12-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122284911","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
引用次数: 0
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
相关产品
×
本文献相关产品
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书