SPWLA 62nd Annual Online Symposium Transactions最新文献

{"title":"TAMING THE THUNDER HORSE WITH AXES AND VECTORS","authors":"B. Ruehlicke, A. Uhrin, Z. Veselovský, M. Schlaich","doi":"10.30632/SPWLA-2021-0008","DOIUrl":"https://doi.org/10.30632/SPWLA-2021-0008","url":null,"abstract":"The Thunder Horse Field targets Middle Miocene deepwater turbiditic reservoirs. Despite of being prolific, the mapping of the ~180 m thick, partly amalgamated reservoir sandstones is challenging. Seismic quality is reduced by the presence of salt structures. The salt overburden and high formation pressure requires the use of heavy mud weights and oil-based drilling fluids, which limit the resolution and interpretation potential of borehole image logs (BHI). Halokinetic movements caused significant post-depositional deformation of the already complex gravity- driven sediment stack and the reservoir beds drape against an E–W oriented salt wall. Consequently, the assessment and removal of the structural dip component is not trivial and the evaluation of paleo-transport directions is considerably more complicated compared to undisturbed deepwater reservoirs. The intention of this paper is to bring the main results from Henry et al. (2018) into context with the eigenvector methodology from Ruehlicke et al. (2019) and to emphasize its value for reservoir characterization.","PeriodicalId":153712,"journal":{"name":"SPWLA 62nd Annual Online Symposium Transactions","volume":"95 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117211242","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"ENHANCED ASSESSMENT OF FLUID SATURATION IN THE WOLFCAMP FORMATION OF THE PERMIAN BASIN","authors":"Sabyasachi Dash, Z. Heidari","doi":"10.30632/SPWLA-2021-0052","DOIUrl":"https://doi.org/10.30632/SPWLA-2021-0052","url":null,"abstract":"Conventional resistivity models often overestimate water saturation in organic-rich mudrocks and require extensive calibration efforts. Conventional resistivity-porosity-saturation models assume brine in the formation as the only conductive component contributing to resistivity measurements. Enhanced resistivity models for shaly-sand analysis include clay concentration and clay-bound water as contributors to electrical conductivity. These shaly-sand models, however, consider the existing clay in the rock as dispersed, laminated, or structural, which does not reliably describe the distribution of clay network in organic-rich mudrocks. They also do not incorporate other conductive minerals and organic matter, which can significantly impact the resistivity measurements and lead to uncertainty in water saturation assessment. We recently introduced a method that quantitatively assimilates the type and spatial distribution of all conductive components to improve reserves evaluation in organic-rich mudrocks using electrical resistivity measurements. This paper aims to verify the reliability of the introduced method for the assessment of water/hydrocarbon saturation in the Wolfcamp formation of the Permian Basin. Our recently introduced resistivity model uses pore combination modeling to incorporate conductive (clay, pyrite, kerogen, brine) and non-conductive (grains, hydrocarbon) components in estimating effective resistivity. The inputs to the model are volumetric concentrations of minerals, the conductivity of rock components, and porosity obtained from laboratory measurements or interpretation of well logs. Geometric model parameters are also critical inputs to the model. To simultaneously estimate the geometric model parameters and water saturation, we develop two inversion algorithms (a) to estimate the geometric model parameters as inputs to the new resistivity model and (b) to estimate the water saturation. Rock type, pore structure, and spatial distribution of rock components affect geometric model parameters. Therefore, dividing the formation into reliable petrophysical zones is an essential step in this method. The geometric model parameters are determined for each rock type by minimizing the difference between the measured resistivity and the resistivity, estimated from Pore Combination Modeling. We applied the new rock physics model to two wells drilled in the Permian Basin. The depth interval of interest was located in the Wolfcamp formation. The rock-class-based inversion showed variation in geometric model parameters, which improved the assessment of water saturation. Results demonstrated that the new method improved water saturation estimates by 32.1% and 36.2% compared to Waxman-Smits and Archie's models, respectively, in the Wolfcamp formation. The most considerable improvement was observed in the Middle and Lower Wolfcamp formation, where the average clay concentration was relatively higher than the other zones. Results demonstrated t","PeriodicalId":153712,"journal":{"name":"SPWLA 62nd Annual Online Symposium Transactions","volume":"33 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-05-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"131121563","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}

{"title":"ROCK TYPING AND NOVEL APPROACH FOR FLUID-SATURATION DISTRIBUTION IN TILTED WATER/OIL CONTACT RESERVOIRS","authors":"R. A. Yznaga, Kresimir Vican, V. Jambunathan, E. Najm, N. Guergueb, Francis Francis Eriavbe","doi":"10.2118/203168-ms","DOIUrl":"https://doi.org/10.2118/203168-ms","url":null,"abstract":"Rock typing in carbonate reservoirs has always represented a difficult challenge due to rock heterogeneity. When interpreting electrical logs, the thick carbonate formation can leave an impression of a homogenous environment; however, looking at core analysis and mercury injection capillary pressure (MICP) data, reservoir heterogeneity can be determined. This complexity of the formation characterization presents challenges in reservoirs that contain tilted water/oil contact (WOC). Tilted WOC discovers hydrocarbon saturation below the free-water level, and different events during geological time can contribute to this specific fluid accumulation. Knowledge of the fluid distribution is needed to understand the mechanisms of oil entrapment, oil volumetrics, and potential recovery mechanisms involved in reservoirs under this wettability and WOC conditions. This case study will describe the workflow used to characterize and model an atypical regime like non-water wet formations in reservoirs with tilted WOC. In this study, a combination of electrical logs, core analysis (lithofacies, poro-perm, MICP), and customized workflow was used to characterize, classify, and map facies. Capillary pressure information and formation tester data were integrated and compiled for each facies. Moving forward, a new method was developed to model saturation height functions representing non-water wet formations and tilted WOC phenomena. Fluid and saturation properties are estimated and assigned to each reservoir point and after reservoir rock types (RRT) were defined. This method has been validated by applying the new approach to actual well data. The drainage capillary pressure (Pc) lab data in the reservoir intervals with established conventional WOC complemented interpretation results derived from acquired logs; however, for the reservoirs zones with identified tilted WOC, correlation and matching Pc lab data with logs was not possible. The new method provides saturation properties in formations with complex fluid-rock interactions and phenomena. This work introduces a novel approach to estimate saturation height functions and saturation distribution for reservoirs with complex fluid-rock interaction and distribution, such as non-water wet formations in tilted WOC conditions.","PeriodicalId":153712,"journal":{"name":"SPWLA 62nd Annual Online Symposium Transactions","volume":"58 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2020-11-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122337406","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}