K. Vandermot, W. van Moer, J. Schoukens, Y.R. Vrije
{"title":"Understanding the Nonlinearity of a Mixer Using Multisine Excitations","authors":"K. Vandermot, W. van Moer, J. Schoukens, Y.R. Vrije","doi":"10.1109/ARFTG.2006.4734371","DOIUrl":"https://doi.org/10.1109/ARFTG.2006.4734371","url":null,"abstract":"In this paper, a measurement technique is proposed to verify whether the \"nonideal nonlinearities\" of mixers are introduced before or after the ideal multiplier. To prove the concept of the proposed approach, simulations are used to show how the system reacts on a special odd multisine excitation. This allows to predict the contributions of the nonideal nonlinearities in the output spectrum of the mixer. A real mixer is then excited with a special odd multisine and measured with a 2-port large signal network analyzer (LSNA). The measurement results are compared to the simulations to validate this technique, which technique allows to get more insight in the nonideal nonlinear behavior of mixers","PeriodicalId":142185,"journal":{"name":"2006 IEEE Instrumentation and Measurement Technology Conference Proceedings","volume":"42 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"132439016","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"The Microflown, a Novel Approach to Helicopters Interior Noise Testing","authors":"A. Vecchio, L. Valent, A. Berthe, H.-E. Debree","doi":"10.1109/IMTC.2006.328628","DOIUrl":"https://doi.org/10.1109/IMTC.2006.328628","url":null,"abstract":"Noise levels recorded in the helicopter cabin are severely affected by the strength and vicinity of noise sources. Jet engines, the gearbox and the rotors can be considered as separated sources-whose spectral content is strongly tonal and rpm dependant-exciting simultaneously the cabin acoustic cavity. The total sound pressure level measurable in cabin can be then considered as a summation of partial contributions generated by each source acting separately. The energy transfer from each source to the cabin can be either structure borne, via the mechanical joints connecting the gearbox to the helicopter's ceiling, or airborne, via the sound propagation in the air from the rotors to the cabin. Analysis techniques such as transfer path analysis are largely applied in the automotive industry that allows identifying the main transmission paths and their relative contribution to the total sound pressure level in cabin. Several variants exist for TPA model to be realized, but all are eventually dependent on the experimental NVH data measure in operating conditions. However, measuring acoustic data on helicopters is a difficult matter because of the multiplicity of source, their high correlation (all sources are dependant on the rotational speed) and the high reflectivity of the acoustics field in cabin. Traditional testing techniques as acoustic intensity or near field acoustic holography fail correctly addressing the problem, as they cannot account for the \"negative contribution\" of reactive intensity or for the complexity of test set-up whose requirement are often colliding with the operating needs of a flight mission. An alternative testing technique that makes use of novel acoustic probes, the Microflown, proves able to deal with harsh environmental testing conditions while improving measurement accuracy and paves the way for a better understanding on how to reduce noise level in helicopter cabins. The Microflown probe couples a miniaturized microphone and a microscopic particle velocity probe. The latter is realized making use of nano-technologies (MEMS) and allows measuring accurately in-situ particle velocity providing a powerful tool to identify noise flow from the sources to the cabin. In the present paper a full description of the novel acoustic probe is provided and an application case is presented that allows realizing noise maps of a helicopter cabin in operating conditions. The noise maps measured with the Microflown point out critical areas that are susceptible of design modifications such as to improve cabin acoustic comfort","PeriodicalId":142185,"journal":{"name":"2006 IEEE Instrumentation and Measurement Technology Conference Proceedings","volume":"19 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"124458042","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Novel Peak Detection Algorithms for Pileup Minimization in Gamma Ray Spectroscopy","authors":"M. Raad, L. Cheded","doi":"10.1109/IMTC.2006.328570","DOIUrl":"https://doi.org/10.1109/IMTC.2006.328570","url":null,"abstract":"A fast waveform sampling facility has been recently developed and integrated into the VAX-based data acquisition system at the Center for Applied Physical Sciences (CAPS). This study uses the above facility in developing algorithms for digitally determining the basic pulse parameters and tackling the problem of pulse pile-up in Gamma-ray spectroscopy. A number of parameter estimation and digital online peak localisation algorithms are being developed, including a pulse classification technique which uses a simple peak search routine based on the smoothed first derivative method, which gave a percentage error of peak amplitude of less than 1%. The classification technique has the unique feature of cutting down the computation largely by only allowing the event of interest to be executed by a particular algorithm. The set-up was also tested with random signals from a 137Cs test source. Gamma pulses from a 3\" Na(TI) scintillation detector were captured as single and double pulses for the purpose of testing the peak detection algorithms. The pulse classification technique was tested successfully on a TMS320C6000 high performance floating-point processor yielding a reduction of the execution time to 2 msec","PeriodicalId":142185,"journal":{"name":"2006 IEEE Instrumentation and Measurement Technology Conference Proceedings","volume":"4 3 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116782537","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Two Time-Interleaved ADC Channel Structure: Analysis and Modeling","authors":"M. Jridi, G. Monnerie, L. Bossuet, D. Dallet","doi":"10.1109/IMTC.2006.328182","DOIUrl":"https://doi.org/10.1109/IMTC.2006.328182","url":null,"abstract":"In this paper, our objective is to transmit a know-how and methods that can help the designer to develop their own models in a reasonable time. With this intention, we take the time interleaved ADC (TIADC) structures like example. The TIADC is a possible way to increase the ADC speed without using exotic and expensive technologies and without loosing too much in resolution. However, this structure suffers from channel mismatch effects. In this paper, we will not propose others mismatch compensation algorithms, as the aim of this work is to provide a top-down modeling methodology using VHDL-AMS","PeriodicalId":142185,"journal":{"name":"2006 IEEE Instrumentation and Measurement Technology Conference Proceedings","volume":"13 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"127248792","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Instrumentation and Analysis-Methods for the Measurement of Profiles using Light Sectioning","authors":"P. O’Leary, P. Schalk, R. Ofner","doi":"10.1109/IMTC.2006.328381","DOIUrl":"https://doi.org/10.1109/IMTC.2006.328381","url":null,"abstract":"This paper presents the instrumentation and analysis methods for the measurement of profiles. The object is rotated in front of a light-sectioning system, which measures the local geometry. A least mean square approximation of the local geometry by a circle is performed, the radius of the circle is used as an estimate for the radius of curvature. The vertical position of the upper tangent to the circle is used to estimate the position of the object. It is shown that the period of revolution can be determined from the aperiodic auto-correlation sequence of the eccentricity of the material. The curve corresponding to the profile of the material is a smooth Jordan curve: this fact is used to take advantage of harmonic filtering to suppress noise and perturbations; and to reconstruct the curve from the radius of curvature. The analysis is performed for both constant rate of revolution and constant arc-length; furthermore, the implementation in MAT-LAB is presented. All methods are demonstrated with real data from industrial measurements","PeriodicalId":142185,"journal":{"name":"2006 IEEE Instrumentation and Measurement Technology Conference Proceedings","volume":"12 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"125511323","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Chia-Hung Lien, Ming Liu, Ying-Wen Bai, Chi Hsiung Lin, Ming-Bo Lin
{"title":"Measurement by the Software Design for the Power Consumption of Streaming Media Servers","authors":"Chia-Hung Lien, Ming Liu, Ying-Wen Bai, Chi Hsiung Lin, Ming-Bo Lin","doi":"10.1109/IMTC.2006.328685","DOIUrl":"https://doi.org/10.1109/IMTC.2006.328685","url":null,"abstract":"The power consumption of the streaming media server can be obtained in real time by the virtual instrumentation software module described in this paper without an additional hardware meter. From the observation of experiment's data we conclude that the measurement of the power consumption of the streaming media server depends on the CPU utilization exquisite dynamically and with some system operation parameters. We form a model to represent the power consumption with respect to the CPU utilization. By using the software method based on this model, users can perform the measurement of the power consumption of the PC at any time even remotely through the Internet. Once the required measurements are made, the acquired data can be immediately transferred back to the monitor server in order that the measured data can be analyzed in more detail. To facilitate the measurement process, we also designed a suitable graphic user interface. Our method has been tested through a comparison with the measurement results by means of a power meter","PeriodicalId":142185,"journal":{"name":"2006 IEEE Instrumentation and Measurement Technology Conference Proceedings","volume":"11 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"115328192","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
G. Cerri, R. De Leo, V. Mariani Primiani, P. Russo
{"title":"Measurement of the Properties of a Plasma Column Used as a Radiating Element","authors":"G. Cerri, R. De Leo, V. Mariani Primiani, P. Russo","doi":"10.1109/IMTC.2006.328546","DOIUrl":"https://doi.org/10.1109/IMTC.2006.328546","url":null,"abstract":"The paper presents a test bench for the characterisation of plasma column used as radiating elements. In particular, the main parameters to be quantify are the efficiency of the plasma antenna, the turn-on time of the column and the conductivity of the plasma. The first two parameters are evaluated by measuring the field radiated by the plasma antenna compared to that radiated by an equivalent copper antenna. For the conductivity, a reflectometric technique is used inserting the plasma column inside a waveguide","PeriodicalId":142185,"journal":{"name":"2006 IEEE Instrumentation and Measurement Technology Conference Proceedings","volume":"84 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"122500798","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"AWG Waveform Compensation by Maximum Entropy Method","authors":"F. Xu","doi":"10.1109/IMTC.2006.328184","DOIUrl":"https://doi.org/10.1109/IMTC.2006.328184","url":null,"abstract":"When a given arbitrary waveform generator (AWG) has limited bandwidth, the signal generated by that instrument will be severely distorted. In particular, the rise time and settling time of the signal generated by that instrument is inherently slow. This paper describes linear distortion compensation by maximum entropy method to compute a pre-distorted waveform so that the AWG will generate a desired waveform","PeriodicalId":142185,"journal":{"name":"2006 IEEE Instrumentation and Measurement Technology Conference Proceedings","volume":"44 6 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129544982","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Active Exploration in Building Hierarchical Neural Networks for Robotics","authors":"Q. Meng, M.H. Lee","doi":"10.1109/IMTC.2006.328464","DOIUrl":"https://doi.org/10.1109/IMTC.2006.328464","url":null,"abstract":"During early robot learning, several mappings need to be set up for sensorimotor coordinations and transformation of sensory information from one modality to another. Usually these mappings are nonlinear and traditional passive learning approaches can not deal with these problems well. In this paper, a hierarchical clustering technique is introduced to group large mapping error locations and these error clusters drive the system to actively explore details of these clusters. Higher level local growing radial basis function subnetworks are used to approximate the mapping residual errors from previous mapping levels. Plastic radial basis function networks construct the substrate of the learning system and a simplified node-decoupled extended Kalman filter algorithm is presented to train these radial basis function networks. Experimental results are given to compare the performance between active learning and passive learning","PeriodicalId":142185,"journal":{"name":"2006 IEEE Instrumentation and Measurement Technology Conference Proceedings","volume":"8 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128564753","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"A Compensation Strategy to Reduce Spring Gravimeter Output for the Effect of Temperature: Experimental Validation","authors":"B. Andò, D. Carbone","doi":"10.1109/IMTC.2006.328614","DOIUrl":"https://doi.org/10.1109/IMTC.2006.328614","url":null,"abstract":"Spring gravimeters are still the most utilized instruments for microgravity studies because of their relatively low cost and small size, which make them easy to transport and install. Several authors have demonstrated that meteoric parameters, especially atmospheric temperature, affect continuously running spring gravimeters. In this paper, a non-linear compensation paradigm is applied to the signal from a gravimeter, installed at two different sites, with the aim of removing the effect of meteorological perturbations. The adopted strategy prove to be site-independent as the signals from both installation sites is reduced effectively for the effect of ambient temperature changes. Conversely, through a second experiment, it is demonstrated that the mechanism triggering the temperature effect on the gravity signal is site dependent","PeriodicalId":142185,"journal":{"name":"2006 IEEE Instrumentation and Measurement Technology Conference Proceedings","volume":"1 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2006-04-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128673599","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}