{"title":"Feasibility of Full Duplex Communication for Wireless Network on Chips with OOK Modulation","authors":"S. Laha, Simran Kaur Sidhu","doi":"10.1109/WAMICON47156.2021.9457082","DOIUrl":"https://doi.org/10.1109/WAMICON47156.2021.9457082","url":null,"abstract":"In this paper, the inherent advantage of On-Off Keying (OOK) Modulation for full duplex communication has been investigated in the physical layer in the context of short distance on chip communication such as wireless network on chip (WiNoC). Here, the OOK transmitter is designed in a manner such that it also works as an RF canceler. This novel design neither requires an external phase inverter nor an attenuator to achieve the cancellation of the self-interfered signal. The distance between the transmitter and the receiver being very small for WiNoC, the self interference cancellation requirement of the typical 100 dB of power reduces by more than 60%. The isolation achieved by the OOK transmitter cum RF canceler is 19 dB as simulated and shown in this work. This energy efficient OOK transmitter has been designed with BSIM-CMG (Common Multi-Gate) FinFET model at 60 GHz. The power dissipation of the transmitter is 23 mW. In tandem with the path loss in the propagation domain and antenna cross polarization this design meets the required isolation and opens up a great opportunity for using full duplex communication for WiNoCs with the energy efficient non-coherent OOK modulation. No work has investigated the feasibility of full duplex communication for WiNoCs or for any other on-chip communications in the physical layer in the past.","PeriodicalId":142104,"journal":{"name":"2021 IEEE 21st Annual Wireless and Microwave Technology Conference (WAMICON)","volume":"38 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-04-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128695394","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Domain Decomposition Based Artificial Neural Networks (ANNs) Modeling of Acoustic Wave Resonators and Filters","authors":"M. Almalkawi, J. Caron","doi":"10.1109/WAMICON47156.2021.9443601","DOIUrl":"https://doi.org/10.1109/WAMICON47156.2021.9443601","url":null,"abstract":"This paper investigates the effectiveness of artificial neural networks (ANNs) as a surrogate modeling method based on machine learning algorithms in emulating the electroacoustic wave behavior of the high-Q piezoelectric resonators and filters. A domain decomposition approach incorporating ANN models to concurrently analyze multidomain radio frequency (RF) modules is also discussed. Different multilayer perceptron (MLP) ANN models have been developed and benchmarked against their model accuracy and model efficiency. The developed models are then utilized to construct ladder-type Band 7 and Band 41 bandpass transmit filters, as examples, to highlight the quality of the modeling method. Other possible applications pertinent to the capability of machine learning algorithms are briefly discussed.","PeriodicalId":142104,"journal":{"name":"2021 IEEE 21st Annual Wireless and Microwave Technology Conference (WAMICON)","volume":"44 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-04-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"130555387","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
J. Barreto, Abdul-Sattar Kaddour, S. Georgakopoulos
{"title":"Optimized and Miniaturized Conformal Strongly Coupled Magnetic Resonance Systems","authors":"J. Barreto, Abdul-Sattar Kaddour, S. Georgakopoulos","doi":"10.1109/WAMICON47156.2021.9443600","DOIUrl":"https://doi.org/10.1109/WAMICON47156.2021.9443600","url":null,"abstract":"In this work, the performance of Conformal Strongly Coupled Magnetic Resonance (CSCMR) systems is studied to achieve optimal Wireless Power Transfer (WPT) efficiency and footprint miniaturization. A traditional CSCMR system from previous work is used to benchmark the performance of the proposed systems. The simulation and measured results demonstrate that by increasing the widths of the Transmitting (TX) and Receiving (RX) resonator loops and reducing source/load loops (while keeping the same overall dimensions) significant miniaturization is achieved. Also, the inner radius of source/load loops is optimized for higher efficiency depending on the resonant frequency of the CSCMR system.","PeriodicalId":142104,"journal":{"name":"2021 IEEE 21st Annual Wireless and Microwave Technology Conference (WAMICON)","volume":"4 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-04-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"123394898","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
J. Barreto, Abdul-Sattar Kaddour, S. Georgakopoulos
{"title":"Highly Efficient Wireless Power Transfer Systems for Wearable and Implantable Devices","authors":"J. Barreto, Abdul-Sattar Kaddour, S. Georgakopoulos","doi":"10.1109/WAMICON47156.2021.9443592","DOIUrl":"https://doi.org/10.1109/WAMICON47156.2021.9443592","url":null,"abstract":"The effects of the human body on wearable and implantable Wireless Power Transfer (WPT) systems, which are based on the Conformal Strongly Coupled Magnetic Resonance (CSCMR) method, are studied. Specifically, a CSCMR system’s efficiency in free space is compared to its efficiency at several locations on and inside the human body. Simulations were performed using the EM SIM4LIFE software and a detailed human body model (i.e., Duke). The effects of the head, chest, and lower back are examined for wearable applications.","PeriodicalId":142104,"journal":{"name":"2021 IEEE 21st Annual Wireless and Microwave Technology Conference (WAMICON)","volume":"108 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-04-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"116806173","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Novel Synthesis Methodology of Lowpass Networks Comprising Generalized Cascaded Quadruplets","authors":"W. Fathelbab","doi":"10.1109/WAMICON47156.2021.9443632","DOIUrl":"https://doi.org/10.1109/WAMICON47156.2021.9443632","url":null,"abstract":"This work presents a novel methodology enabling the synthesis of lowpass networks comprising generalized cascaded quadruplets (GCQs). The methodology derives the proposed networks from their canonical lowpass counterparts upon the re-synthesis of sub-network blocks in an intuitive fashion. A lowpass filter comprising two GCQs is synthesized and the steps involved are presented demonstrating the design methodology.","PeriodicalId":142104,"journal":{"name":"2021 IEEE 21st Annual Wireless and Microwave Technology Conference (WAMICON)","volume":"144 10 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-04-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"129503460","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Amirreza Ghadimi Avval, Soheil Nouri, S. El-Ghazaly
{"title":"Effects of Electromagnetic Wave Propagations in Large-Signal Analysis of Millimeter-Wave Transistors","authors":"Amirreza Ghadimi Avval, Soheil Nouri, S. El-Ghazaly","doi":"10.1109/WAMICON47156.2021.9443611","DOIUrl":"https://doi.org/10.1109/WAMICON47156.2021.9443611","url":null,"abstract":"A distributed-model-based approach is developed for small- and large-signal analyses of millimeter-wave transistors. To obtain the equivalent circuit model parameters, a structure based extraction technique is utilized. The method employs the physical geometry and structural topology of the device for finding the parameter values based on conformal mapping concepts and incremental inductance rule. The significant contribution of this approach is to incorporate the electromagnetic wave propagation effects in designing the distributed circuit which ensures achieving a universally accurate model over a very broad frequency range. This technique is applied to analyze a GaN MISHEMT device. The simulation results for the gain and output power under the small- and large-signal conditions are obtained for different device widths at various bias points and operating frequencies. To validate the performance of the proposed modeling approach, the results are compared with the measurement.","PeriodicalId":142104,"journal":{"name":"2021 IEEE 21st Annual Wireless and Microwave Technology Conference (WAMICON)","volume":"39 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-04-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"126031845","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Jiayou Xu, Yuanqing Chen, Yu-Jiun Ren, Yong Luo, Guangli Yang
{"title":"A Wide Scanning-Angle mmWave AiP Antenna Module for 5G Portable Terminals","authors":"Jiayou Xu, Yuanqing Chen, Yu-Jiun Ren, Yong Luo, Guangli Yang","doi":"10.1109/WAMICON47156.2021.9443624","DOIUrl":"https://doi.org/10.1109/WAMICON47156.2021.9443624","url":null,"abstract":"Millimeter-Wave (mmW) communication in 5G mobile terminals requires mmW antenna to have low-profile design structure, wide-bandwidth and large-angle beam scanning. In this work, $mathrm{a}4 times2$ array is presented which can be applied for the mmW communications of 5G mobile terminals. The array element design adopts a patch antenna structure with a shorting pin, which can excite an extra zero mode resonant frequency. Combined the 2nd zero mode and the original TM01 mode, the proposed array can give a broadband from 23.5-28 GHz, a large-angle beam scanning with ±60° coverage, as well as a low-profile substrate with 0.508 mm. Then, we designed an antenna in package (AiP) antenna module based on the proposed array, and the measured results have demonstrated good performance.","PeriodicalId":142104,"journal":{"name":"2021 IEEE 21st Annual Wireless and Microwave Technology Conference (WAMICON)","volume":"46 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-04-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"133101065","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"Tunable S-band Elliptic Bandpass Filter With Constant Absolute Bandwidth","authors":"H. Yue","doi":"10.1109/WAMICON47156.2021.9443597","DOIUrl":"https://doi.org/10.1109/WAMICON47156.2021.9443597","url":null,"abstract":"This paper presents a tunable bandpass filter in the S band. The proposed design cascades a 5th order elliptic low-pass filter (LPF) and a 5th order elliptical high-pass filter (HPF) to achieve the desired bandpass behavior. The absolute bandwidth of this design is determined by the resonance frequencies (transmission zeros) of the shunt series LC resonators in the elliptic LPF and HPF, respectively. To tune the filter center frequency, the capacitor of each shunt series LC resonator is replaced with a bank of capacitors switched using PIN diodes. To maintain constant absolute bandwidths while tuning center frequency, the transmission zeros of the LPF and HPF branches are tuned simultaneously. At the same time, the impact of finite Q factor of the PIN diodes on filter insertion loss is minimized as a result of tuning the transmission zeros. In addition, the PIN diodes parasitic inductance, at the ON state, is absorbed by the inductance of the shunt series LC resonators. Therefore, wide range tuning can be achieved. The proposed design utilizes three PIN diodes for each shunt branch to achieve a tuning range from 2-3.5GHz with absolute 3dB-bandwidths of $sim$500MHz. All three tuning states reveal insertion loss better than 2. 5dB over the entire tuning range with return loss better than 8dB.","PeriodicalId":142104,"journal":{"name":"2021 IEEE 21st Annual Wireless and Microwave Technology Conference (WAMICON)","volume":"20 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-04-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"117187885","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
{"title":"On the bending effects of a printed 4x4 antenna array","authors":"J. E. Rogers","doi":"10.1109/WAMICON47156.2021.9443596","DOIUrl":"https://doi.org/10.1109/WAMICON47156.2021.9443596","url":null,"abstract":"The bending effects of proximity coupled 4x4 patch arrays with printed patch elements operating in the X-band near 10 GHz is presented. The patch arrays have circular patch elements with inclusive slots residing on the top surface of four layers (10mil/layer) of DuPont Pyralux AP. The inclusive slots decrease the axial ratio of the antenna and increase the impedance bandwidth. Each array has a microstrip feed network of quarterwave transformers and T-junction power dividers in the middle of the four layer stackup. The microstrip lines are proximity (or capacitively) coupled to the patch elements. A ground plane on the bottom surface of the four layer stackup provides surface agnostic behavior. The patch elements and microstrip feed network are printed with DuPont CB028 conductive ink using a liquid dispense technique. For the purpose of comparison to PCB processed antennas, 4x4 patch arrays with 1$/_{2}$ oz. electroplated copper for the patch elements and microstrip feed network are also reported. The gain, 3 dB beamwidth, and VSWR bandwidth behavior have been studied for uniaxial bending of the two arrays for radii of curvature down to a 1 inch. The nominal (i.e., no bending) measured far-field gain of the arrays is 14.5 dBi (printed) and 14.7 dBi (copper). The printed and copper arrays behave very similarly with changes in gain of 9.3 dB (printed) and 8.3 dB (copper) for bending down to 1 inch in an axial direction and changes in gain of2.6 dB (printed) and 2.8 dB (copper) for bending down to 1 inch in a circumferential direction.","PeriodicalId":142104,"journal":{"name":"2021 IEEE 21st Annual Wireless and Microwave Technology Conference (WAMICON)","volume":"28 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-04-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"114822760","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}
Antonio J. Rubio, Abdul-Sattar Kaddour, S. Georgakopoulos, Nathan C. Brown, Collin Ynchausti, Larry Howell, S. Magleby
{"title":"An Origami-Inspired Foldable Reflectarray on a Straight-Major Square-Twist Pattern","authors":"Antonio J. Rubio, Abdul-Sattar Kaddour, S. Georgakopoulos, Nathan C. Brown, Collin Ynchausti, Larry Howell, S. Magleby","doi":"10.1109/WAMICON47156.2021.9443629","DOIUrl":"https://doi.org/10.1109/WAMICON47156.2021.9443629","url":null,"abstract":"This paper proposes a high-gain Reflectarray Antenna (RA) design on an origami-inspired foldable structure, which is based on the straight-major square-twist pattern (SMST). The antenna was designed to operate at 16 GHz and direct its main beam along $varphi=0^{mathrm{o}}, theta=30^{mathrm{o}}$ direction with a gain of 28.34 $mathrm{d}mathrm{B}mathrm{i}$. The RA was excited by a horn antenna of 14 $mathrm{d}mathrm{B}mathrm{i}$ gain with Q-factor of 5.25 positioned at a distance of $ 10lambda$ with a $10^{mathrm{o}}$ offset angle. The foldable nature of our origami-inspired structure provides a 92% packing efficiency of the RA aperture surface area, thereby offering a significant advantage for small satellites and terrestrial tactical applications.","PeriodicalId":142104,"journal":{"name":"2021 IEEE 21st Annual Wireless and Microwave Technology Conference (WAMICON)","volume":"39 1","pages":"0"},"PeriodicalIF":0.0,"publicationDate":"2021-04-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":null,"resultStr":null,"platform":"Semanticscholar","paperid":"128357849","PeriodicalName":null,"FirstCategoryId":null,"ListUrlMain":null,"RegionNum":0,"RegionCategory":"","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":"","EPubDate":null,"PubModel":null,"JCR":null,"JCRName":null,"Score":null,"Total":0}